Effects of fermentation conditions on valuable products of ethanolic fungus Mucor indicus

Simultaneous lipase production and immobilization: morphology and physiology study of Penicillium simplicissimum in submerged and solid-state fermentation with polypropylene as an inert support

The influence of different carbon sources (glucose (G), olive oil (O), and a combination of both (GO)) in the physiology (biomass and lipase production) and morphology (light and environmental and scanning electron microscopy) of the fungus Penicillium simplicissimum by applying submerged (SmF) and solid-state (SSF) fermentations was investigated. The cultivation was carried out using polypropylene as hydrophobic inert support in SmF and SSF to understand better the influence of a support for the fungus growth and also provides the immobilization of lipases during its production. Micrographs show different morphologies: in SSF, the fungus grows on and inside the inert support independent of the media; in SmF, the formation of high-density spherical pellets obtained in medium GO leads to the best productivity and specific product yield Y_p/x._.Conidiation is observed mainly in SSF, a few in SmF with polypropylene as inert support and not in SmF, which may indicate a stress condition in SSF. Possibly, the morphology acquired by the fungus under stressful conditions may be the key to the higher biomass and lipase productivity at SSF. The developed process with simultaneous production and immobilization of lipase leads to a new promissory biocatalyst once it can be directly applied with no need for downstream processes.

Discovery of Three New Mucor Species Associated with Cricket Insects in Korea

Species in the genus Mucor have a worldwide distribution and are isolated from various substrata and hosts, including soil, dung, freshwater, and fruits. However, their diversity from insects is still much too little explored. The aim of this study was to characterize three new species of Mucor: Mucor grylli sp. nov., M. hyangburmii sp. nov., and M. kunryangriensis sp. nov., discovered in Kunryang-ri, Cheongyang in the Chungnam Province of Korea, during an investigation of Mucorales from cricket insects. The new species are described using morphological characters and molecular data including ITS and LSU rDNA regions. Mucor grylli is characterized by the highly variable shape of its columellae, which are subglobose to oblong, obovoid, strawberry-shaped, and sometimes slightly or strongly constricted in the center. Mucor hyangburmii is characterized by the production of azygospores and growth at 40 °C. Mucor kunryangriensis is characterized by the variable shape of its columellae, which are elongated-conical, obovoid, cylindrical ellipsoid, cylindrical, and production of abundant yeast-like cells on PDA, MEA, and SMA media. Based on the sequence analysis of two genetic markers, our phylogenic assessment strongly supported M. grylli, M. hyangburmii, and M. kunryangriensis as new species. Detailed descriptions, illustrations, and phylogenetic trees are provided.

Response-Surface Statistical Optimization of Submerged Fermentation for Pectinase and Cellulase Production by Mucor circinelloides and M. hiemalis

Cellulase and pectinase are degrading cellulosic and pectic substances that form plant cell walls and, thereby, they have a wide range of applications in the agro-industrial by-products recycling and food industries. In the current research, Mucor circinelloides and M. hiemalis strains were tested for their ability to produce cellulase and pectinase from tangerine peel by submerged fermentation. Experiments on five variables: temperature, pH, incubation period, inoculum size, and substrate concentration, were designed with a Box–Behnken design, as well as response surface methodology (RSM), and analysis of variance was performed. In addition, cellulase and pectinase were partially purified and characterized. At their optimum parameters, M. circinelloides and M. hiemalis afforded high cellulase production (37.20 U/mL and 33.82 U/mL, respectively) and pectinase (38.02 U/mL and 39.76 U/mL, respectively). The partial purification of M. circinelloides and M. hiemalis cellulase produced 1.73- and 2.03-fold purification with 31.12 and 32.02% recovery, respectively; meanwhile, 1.74- and 1.99-fold purification with 31.26 and 31.51% recovery, respectively, were obtained for pectinase. Partially purified cellulase and pectinase from M. circinelloides and M. hiemalis demonstrated the highest activity at neutral pH, and 70 and 50 °C, for cellulase and 50 and 60 °C, for pectinase, respectively. Moreover, 10 mM of K+ increased M. circinelloides enzymatic activity. The production of cellulase and pectinase from M. circinelloides and M. hiemalis utilizing RSM is deemed profitable for the decomposition of agro-industrial wastes.

Genetic Diversity of Amylomyces rouxii from Ragi tapai in Java Island Based on Ribosomal Regions ITS1/ITS2 and D1/D2

Amylomyces rouxii is commonly found as amylolytic fungi in tapai fermentation. However, its diversity is rarely reported despite being often used for food production in Southeast Asia. This research aims to analyze the genetic diversity and the distribution pattern of A. rouxii from Ragi tapai in Java Island, Indonesia. We isolated the fungus from samples obtained from Ragi tapai producing centers in Bandung, Sumedang, Muntilan, Blora, Yogyakarta, and Bondowoso. The obtained isolates were molecularly identified based on the ribosomal regions ITS1/ITS2 and D1/D2, then analyzed for phylogenetic tree reconstruction, genetic distance, genetic variation, and haplotype networking. Six isolates showed specific morphological traits of A. rouxii. However, phylogenetic tree reconstruction on the ribosomal genes showed that the isolates were grouped into two different clades related to two species. Clade A included BDG, SMD, and MTL isolates related to A. rouxii, whereas clade B included YOG, BLR, and BDS isolates related to Mucor indicus. The genetic distances between clades for ITS1/ITS2 and D1/D2 were 0.6145 and 0.1556, respectively. In conclusion, we confirmed the genetic diversity of molds from Ragi tapai in Java Island and showed that the isolates are not only related to A. rouxii as reported before.

Enhanced protein and amino acids of corn-ethanol co-product by Mucor indicus and Rhizopus oryzae

Upcycle of co-products from corn-ethanol plant into protein-rich animal feed with balanced key amino acids via solid-state fermentation is a promising approach to economically support both biofuel and animal feed industries. However, there are multiple types of solid-state fermentation microorganisms and growth conditions that have not been tested. In this study, Mucor indicus and Rhizopus oryzae were used to ferment corn-based wet distiller's grains with solubles (WDGS). The effects of fermentation conditions (temperature, agitation, and moisture) and supplementations (extraneous carbon and nitrogen sources) were evaluated on protein production and amino acids profiles before and after fermentation. The study established best fermentation conditions (23 °C, static incubation for 4 days at 70% initial moisture content) to improve protein content for both R. oryzae and M. indicus. Moreover, urea supplied to R. oryzae and M. indicus improved protein concentration by 35 and 38%, and total amino acids content by 28 and 18%, respectively. The amount of 693.1 and 451.8 mg of additional total amino acids including 262.8 and 227.7 mg of key amino acids (lysine, methionine, tryptophan, and arginine) was synthesized by R. oryzae and M. indicus, respectively, per supply of 536 mg urea in 25 g of WDGS. This study demonstrated the feasibility of urea as a low-cost nitrogen source for amino acid biosynthesis in fungal fermentation of WDGS, which could contribute to the increasing demand for high-value monogastric animal feed.

Diversity of Filamentous Fungi Isolated From Some Amylase and Alcohol-Producing Starters of India

Filamentous fungi are important organisms in traditionally prepared amylase and alcohol-producing dry starters in India. We collected 40 diverse types of amylase and alcohol-producing starters from eight states in North East India viz. marcha, thiat, humao, hamei, chowan, phut, dawdim, and khekhrii. The average fungal population was 4.9 × 10⁵ cfu/g with an average of pH 5.3 and 10.7%, respectively. In the present study, 131 fungal isolates were isolated and characterized based on macroscopic and microscopic characteristics and were grouped into 44 representative fungal strains. Based on results of morphological characteristics and ITS gene sequencing, 44 fungal strains were grouped into three phyla represented by Ascomycota (48%), Mucoromycota (38%), and Basidiomycota (14%). Taxonomical keys to species level was illustrated on the basis of morphological characteristics and ITS gene sequencing, aligned to the fungal database of NCBI GenBank, which showed seven genera with 16 species represented by Mucor circinelloides (20%), Aspergillus sydowii (11%), Penicillium chrysogenum (11%), Bjerkandera adusta (11%), Penicillium citrinum (7%), Rhizopus oryzae (7%), Aspergillus niger (5%), Aspergillus flavus (5%), Mucor indicus (5%) Rhizopus microsporus (5%), Rhizopus delemar (2%), Aspergillus versicolor (2%), Penicillium oxalicum (2%), Penicillium polonicum (2%), Trametes hirsuta (2%), and Cladosporium parahalotolerans (2%). The highest Shannon diversity index H was recorded in marcha of Sikkim (H: 1.74) and the lowest in hamei of Manipur (H: 0.69). Fungal species present in these amylolytic starters are morphologically, ecologically and phylogenetically diverse and showed high diversity within the community.

Dual Extraction of Crustacean and Fungal Chitosan from a Single Mucor circinelloides Fermentation

Mucor circinelloides is a fungus that has been reported to produce ethanol, oil, protein, phosphate and glucosamine, depending on the available nutrients and cultivation conditions. Due to its ability to produce extracellular proteases, it is able to ferment polypeptides and amino acids broken down from various protein sources. In this study, we attempted to culture the Mucor circinelloides on waste substrates to deproteinize prawn shells for the extraction of chitin and subsequently extract chitosan from its fungal cell wall in a concurrent fermentation. The physio-chemical properties of the extracted crustacean chitin and fungal chitosan were determined by Fourier Transform Infrared Spectroscopy (FTIR) and Elemental Analysis (EA). We found that Mucor circinelloides grown on okara and coffee waste behaved as an excellent protease producer and successfully extracted chitin from prawn shells with a degree of deacetylation of 69.94% and 68.82%, respectively, comparable to commercial chitin (70.46%). The fungal chitosan extracted from the fermentation of Mucor circinelloides on red grape pomace substrate showed a degree of deacetylation of 61.05%, comparable to commercial chitosan (64.00%). Our results suggested feasibility of extracting chitosan from seafood waste-streams using cost-effective microbial fermentation.

Feasibility Assessment of a Bioethanol Plant in the Northern Netherlands

Due to the exhaustion and increased pressure regarding the environmental and political aspects of fossil fuels, the industrial focus has switched towards renewable energy resources. Lignocellulosic biowaste can come from several sources, such as industrial waste, agricultural waste, forestry waste, and bioenergy crops and processed into bioethanol via a biochemical pathway. Although much research has been done on the ethanol production from lignocellulosic biomass, the economic viability of a bioethanol plant in the Northern Netherlands is yet unknown, and therefore, examined. In this thesis, the feasibility study of a bioethanol plant treating sugar beet pulp, cow manure, and grass straw is conducted using the simulation software SuperPro Designer. Results show that it is not economically viable to treat the tested lignocellulosic biomass for the production of bioethanol, since all three original cases result in a negative net present value (NPV). An alternative would be to exclude the pretreatment step from the process. Although this results in a lower production of bioethanol per year, the plant treating sugar beet pulp (SBP) and grass straw (GS) becomes economically viable since the costs have significantly decreased.

Second Generation Bioethanol Production: On the Use of Pulp and Paper Industry Wastes as Feedstock

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production.