An investigation into the relationship between carrier-based dry powder inhalation performance and formulation cohesive–adhesive force balances

Predicting the Strength of Cohesive and Adhesive Interparticle Interactions for Dry Powder Inhalation Blends of Terbutaline Sulfate with α-Lactose Monohydrate

Grid-based systematic search methods are used to investigate molecule-molecule, molecule-surface, and surface-surface contributions to interparticle interactions in order to identify the crystal faces that most strongly affect particle behavior during powder blend formulation and delivery processes. The model system comprises terbutaline sulfate (TBS) as an active pharmaceutical ingredient (API) and α-form lactose monohydrate (LMH). A combination of systematic molecular modeling and X-ray computed tomography (XCT) is used to determine not only the adhesive and cohesive interparticle energies but, also the agglomeration behavior during manufacturing and de-agglomeration behavior during delivery after inhalation. This is achieved through a detailed examination of the balance between the adhesive and cohesive energies with the XCT results confirming the blend segregation tendencies, through the particle-particle de-agglomeration process. The results reveal that the cohesive interaction energies of TBS-TBS are higher than the adhesive energies between TBS and LMH, but that the cohesive energies of LMH-LMH are the smallest between molecule and molecule, molecule and surface, and surface and surface. This shows how systematic grid-search molecular modeling along with XCT can guide the digital formulation design of inhalation powders in order to achieve optimum aerosolization and efficacy for inhaled medicines. This will lead to faster pharmaceutical design with less variability, higher quality, and enhanced performance.

Engineering the right formulation for enhanced drug delivery

Dry powder inhalers (DPIs) can be used with a wide range of drugs such as small molecules and biologics and offer several advantages for inhaled therapy. Early DPI products were intended to treat asthma and lung chronic inflammatory disease by administering low-dose, high-potency drugs blended with lactose carrier particles. The use of lactose blends is still the most common approach to aid powder flowability and dose metering in DPI products. However, this conventional approach may not meet the high demand for formulation physical stability, aerosolisation performance, and bioavailability. To overcome these issues, innovative techniques coupled with modification of the traditional methods have been explored to engineer particles for enhanced drug delivery. Different particle engineering techniques have been utilised depending on the types of the active pharmaceutical ingredient (e.g., small molecules, peptides, proteins, cells) and the inhaled dose. This review discusses the challenges of formulating DPI formulations of low-dose and high-dose small molecule drugs, and biologics, followed by recent and emerging particle engineering strategies utilised in developing the right inhalable powder formulations for enhanced drug delivery.

The Optimisation of Carrier Selection in Dry Powder Inhaler Formulation and the Role of Surface Energetics

This review examines the effects of particle properties on drug-carrier interactions in the preparation of a dry powder inhaler (DPI) formulation, including appropriate mixing technology. The interactive effects of carrier properties on DPI formulation performance make it difficult to establish a direct cause-and-effect relationship between any one carrier property and its effect on the performance of a DPI formulation. Alpha lactose monohydrate remains the most widely used carrier for DPI formulations. The physicochemical properties of α-lactose monohydrate particles, such as particle size, shape and solid form, are profoundly influenced by the method of production. Therefore, wide variations in these properties are inevitable. In this review, the role of surface energetics in the optimisation of dry powder inhaler formulations is considered in lactose carrier selection. Several useful lactose particle modification methods are discussed as well as the use of fine lactose and force control agents in formulation development. It is concluded that where these have been investigated, the empirical nature of the studies does not permit early formulation prediction of product performance, rather they only allow the evaluation of final formulation quality. The potential to leverage particle interaction dynamics through the use of an experimental design utilising quantifiable lactose particle properties and critical quality attributes, e.g., surface energetics, is explored, particularly with respect to when a Quality-by-Design approach has been used in optimisation.

Recent developments in lactose blend formulations for carrier-based dry powder inhalation

Lactose is the most commonly used excipient in carrier-based dry powder inhalation (DPI) formulations. Numerous inhalation therapies have been developed using lactose as a carrier material. Several theories have described the role of carriers in DPI formulations. Although these theories are valuable, each DPI formulation is unique and are not described by any single theory. For each new formulation, a specific development trajectory is required, and the versatility of lactose can be exploited to optimize each formulation. In this review, recent developments in lactose-based DPI formulations are discussed. The effects of varying the material properties of lactose carrier particles, such as particle size, shape, and morphology are reviewed. Owing to the complex interactions between the particles in a formulation, processing adhesive mixtures of lactose with the active ingredient is crucial. Therefore, blending and filling processes for DPI formulations are also reviewed. While the role of ternary agents, such as magnesium stearate, has increased, lactose remains the excipient of choice in carrier-based DPI formulations. Therefore, new developments in lactose-based DPI formulations are crucial in the optimization of inhalable medicine performance.

Remdesivir Powders Manufactured by Jet Milling for Potential Pulmonary Treatment of COVID-19

Remdesivir is one of the effective drugs proposed for the treatment of coronavirus disease 2019 (COVID-19). However, the study on inhalable regimen is currently limited though COVID-19 is respiratory diseases and infects lung area. This work aims to prepare inhalable remdesivir formulations and verify their effectiveness through in vitro evaluations.Formulations containing different ratios of jet-milled inhalable remdesivir (5%, 10%, 20%,40%,70%) with excipients were produced and characterized in terms of the particle size distribution, particle morphology, flowability, water content, crystallinity, the water sorption and desorption capabilities and the aerodynamic performance.Results indicating that drug loading is a vital factor in facilitating the dispersion of remdesivir dry powder, and the ternary excipient plays a negligible role in improving aerosol performance. Besides, the 70% remdesivir with lactose carrier (70%RD-Lac) was physically stable and retain high aerosol performance after conditioned at 40 °C and 75% RH for a month. Therefore, formulation 70% RD-Lac might be recommended as a candidate product for the potential treatment of COVID-19.

Development of a novel method for the continuous blending of carrier-based dry powders for inhalation using a co-rotating twin-screw extruder

Twin-screw extruders are useful in tuning certain product characteristics due to the ability to greatly modify screw profiles as well as operating parameters. However, their use has not yet been applied to dry powder inhalation. In this study the feasibility of using a twin-screw extruder to blend dry powders for inhalation was assessed. Micronized rifampicin (1%) was used as a model drug with lactose carrier (median size ∼ 44 µm) and 0.4% magnesium stearate as a multi-functional ternary agent. Blend performance was compared with low shear (Turbula®) batch mixing. Similar blend uniformity and aerosol performance was observed, indicating the twin-screw extruder successfully functions as a mixer for dry powders for inhalation. The ability to utilize the twin-screw extruder as a continuous mixer leads to new opportunities in the continuous manufacturing of powders for inhalation.

Performance tuning of particle engineered mannitol in dry powder inhalation formulations

Typically, smooth lactose particles are used as carrier in dry powder formulations for inhalation. Two classical approaches to improve their aerodynamic behaviour are the addition of fines (milled lactose) or magnesium stearate (MgSt). Mannitol (Parteck® M DPI) as an alternative carrier was used in this study. It has an irregular particle size distribution and a large and rough surface. This could be challenging for the detachment of micronised drug upon inhalation and it is unclear whether classic strategies for the optimisation of aerodynamic performance can be applied. In contrast, its rough surface could be an advantage in terms of drug load. To address these questions, the mannitol carrier was blended with two different drugs using various concentrations up to 50%. Self-produced mannitol fines and MgSt in different amounts and in combination were added. Blends were investigated regarding their in vitro aerodynamic performance, dosing behaviour and powder rheology. An addition of up to 30% drug load was possible while retaining good flowability and constant dosing behaviour. Despite the rough and indented carrier surface of the mannitol carrier, the addition of fines or MgSt increased the inhalable fraction, but higher concentrations of fines, as used for lactose blends, were necessary.

Co-spraying of carriers (mannitol-lactose) as a method to improve aerosolization performance of salbutamol sulfate dry powder inhaler

Although in dry powder inhaler (DPI) formulations a single carrier is used, a single carrier is not able to provide an excellent aerosolization performance when it is used in DPI formulations. Thereby, the aim of this study was to engineer a suitable ternary mixture of mannitol-lactose-leucine to be used in a DPI formulation with enhanced aerosolization performance. To this end, binary mixtures of mannitol:lactose containing a constant amount of leucine (5% w/w of carriers) were spray-dried as a single solution. Spray-dried samples were blended with salbutamol sulfate to determine the efficiency of their aerosolization performance. Interestingly, note that lactose was in its amorphous state stabilized by the presence of mannitol in the samples. Spray-dried mannitol without lactose showed a combination of the α- and β-polymorphic forms which was the case in all other ratios of mannitol:lactose. It was shown that the highest fine particle fraction (FPF) was 62.42 ± 4.21% which was obtained for the distinct binary mixtures (1:3 mannitol:lactose) compared to a single carrier. This study opens a new window to investigate further the implementation of binary mixtures of sugar carriers containing leucine in DPI formulations to overcome poor aerosolization performance the mentioned DPI formulations.

Effect of Dosing Cup Size on the Aerosol Performance of High-Dose Carrier-Based Formulations in a Novel Dry Powder Inhaler

This study investigated how varying the dosing cup size of a novel reservoir dry powder inhaler (DPI) affects the detachment of a micronized active pharmaceutical ingredient from larger carrier particles, and the aerosol performance of a DPI carrier formulation. Three different-sized dosing cups were designed: 3D printed with cup volumes of 16.26 mm³, 55.99 mm³, and 133.04 mm³, and tested with five different carrier type formulations with beclomethasone dipropionate (BDP) concentrations between 1% and 30% (w/w). The morphology of the BDP attached to the carrier was investigated using scanning electron microscopy and the aerosol performance using the Next Generation Impactor. Increasing the volume of the dosing cup led to a reduction of BDP deposition in the Next Generation Impactor preseparator, and an increase in BDP detachment from the carrier was observed, leading to increased aerosol performance. The decreased amount of BDP attached to carrier after aerosolization was attributed to the increased dosing cup void volume. This may enable greater particle-particle and particle-wall collisions, with greater BDP detachment from the carrier and deagglomeration of smaller agglomerates. The dosing cup volume was observed to have significant influence on particle dispersion and the overall aerosol performance of a DPI.

Influence of excipients on physical and aerosolization stability of spray dried high-dose powder formulations for inhalation

The aim of this study is to investigate the influence of excipients on physical and aerosolization stability of spray dried Ciprofloxacin dry powder inhaler formulations. The model drug, Ciprofloxacin hydrochloride, was co-spray dried with excipients such as disaccharides (sucrose, lactose, trehalose), mannitol and l-leucine. The spray dried samples were stored at two different relative humidity (RH) conditions of: (1) 20% and (2) 55% RH at 20 °C. Ciprofloxacin co-spray dried with disaccharides and l-leucine in the mass ratio of 1:1 demonstrated an increase in fine particle fraction (FPF) as compared with the spray dried Ciprofloxacin alone when stored at 20% RH. However, deterioration in FPF of Ciprofloxacin co-spray dried with disaccharide and mannitol was observed upon storage at 55% RH as compared to the corresponding formulations stored at 20% RH due to particle agglomeration. Whereas, 10% and 50% w/w l-leucine in the formulation showed no change in aerosol performance (FPF of 71.1 ± 3.5% and 79.5 ± 3.1%, respectively) when stored at 55% RH for 10 days as compared to 20% RH (FPF of 68.1 ± 0.3% and 73.6 ± 7.1%, respectively). l-Leucine demonstrated aerosolization stability by alleviating crystallization of Ciprofloxacin to some extent and preventing significant change in particle morphology. l-Leucine is well-recognized as aerosolization enhancer; our study has shown l-leucine is also a physical and aerosolization stabilizer for spray dried Ciprofloxacin DPI formulations. Such stability enhancing activities were attributed to the enrichment of l-leucine on the particle surface as confirmed by XPS data, and intermolecular interactions between l-leucine and Ciprofloxacin as measured by FT-IR.

Mechanistic investigation of mixing and segregation of ordered mixtures: experiments and numerical simulations

Pulmonary delivery of cohesive and micronized drugs through dry powder inhalers (DPIs) is traditionally achieved through the formation of ordered mixtures. In order to improve the mechanistic understanding of formation of ordered mixtures, the system consisting of micronized lactose (AZFL, representative of an active pharmaceutical ingredient) and a coarse particle carrier (LH100) is investigated as a function of different process and material variables in a high shear mixer (HSM) and in a low shear double cone (DCN) blender, using both experimental and numerical methods. Process insight is developed using a Discrete Element Method (DEM) based numerical model which could predict the formation of ordered mixtures in the two blenders and was verified against experimental determinations. Spatial and temporal evolution of granular flow are visualized and quantified in silico to reveal distinguishing features of both blenders to aid in rational selection of blenders and process parameters.

Comparison of the cohesion-adhesion balance approach to colloidal probe atomic force microscopy and the measurement of Hansen partial solubility parameters by inverse gas chromatography for the prediction of dry powder inhalation performance

The abilities of the cohesive-adhesive balance approach to atomic force microscopy (AFM) and the measurement of Hansen partial solubility parameters by inverse gas chromatography (IGC) to predict the performance of carrier-based dry powder inhaler (DPI) formulations were compared. Five model drugs (beclometasone dipropionate, budesonide, salbutamol sulphate, terbutaline sulphate and triamcinolone acetonide) and three model carriers (erythritol, α-lactose monohydrate and d-mannitol) were chosen, giving fifteen drug-carrier combinations. Comparison of the AFM and IGC interparticulate adhesion data suggested that they did not produce equivalent results. Comparison of the AFM data with the in vitro fine particle delivery of appropriate DPI formulations normalised to account for particle size differences revealed a previously observed pattern for the AFM measurements, with a slightly cohesive AFM CAB ratio being associated with the highest fine particle fraction. However, no consistent relationship between formulation performance and the IGC data was observed. The results as a whole highlight the complexity of the many interacting variables that can affect the behaviour of DPIs and suggest that the prediction of their performance from a single measurement is unlikely to be successful in every case.

The influence of secondary processing on the structural relaxation dynamics of fluticasone propionate

This study investigated the structural relaxation of micronized fluticasone propionate (FP) under different lagering conditions and its influence on aerodynamic particle size distribution (APSD) of binary and tertiary carrier-based dry powder inhaler (DPI) formulations. Micronized FP was lagered under low humidity (LH 25 C, 33% RH [relative humidity]), high humidity (HH 25°C, 75% RH) for 30, 60, and 90 days, respectively, and high temperature (HT 60°C, 44% RH) for 14 days. Physicochemical, surface interfacial properties via cohesive-adhesive balance (CAB) measurements and amorphous disorder levels of the FP samples were characterized. Particle size, surface area, and rugosity suggested minimal morphological changes of the lagered FP samples, with the exception of the 90-day HH (HH90) sample. HH90 FP samples appeared to undergo surface reconstruction with a reduction in surface rugosity. LH and HH lagering reduced the levels of amorphous content over 90-day exposure, which influenced the CAB measurements with lactose monohydrate and salmeterol xinafoate (SX). CAB analysis suggested that LH and HH lagering led to different interfacial interactions with lactose monohydrate but an increasing adhesive affinity with SX. HT lagering led to no detectable levels of the amorphous disorder, resulting in an increase in the adhesive interaction with lactose monohydrate. APSD analysis suggested that the fine particle mass of FP and SX was affected by the lagering of the FP. In conclusion, environmental conditions during the lagering of FP may have a profound effect on physicochemical and interfacial properties as well as product performance of binary and tertiary carrier-based DPI formulations.

Effect of Device Design and Formulation on the In Vitro Comparability for Multi-Unit Dose Dry Powder Inhalers

The focus of this investigation was to understand the design space to achieve comparable in vitro performance of two multi-unit dose dry powder inhalers (DPIs)—Flixotide® Accuhaler® (reference product) and MultiHaler® (test product). Flow field, pressure drop and particle trajectories within the test and reference DPI devices were modelled via computational fluid dynamics (CFD). Micronized fluticasone propionate (FP) was characterized to determine particle size distribution (PSD), specific surface area (SSA) and surface interfacial properties using cohesive-adhesive balance (CAB). CFD simulations suggested that the pressure drop and airflow velocity in the MultiHaler® were greater than Accuhaler®. Two modified test devices (MOD MH 1 and MOD MH 2) were manufactured with the introduction of by-pass channels in the airflow path, which achieved comparable specific resistance and airflow path between the test and reference devices. Assessment of reference product formulation in modified test devices suggested that MOD MH 2 achieved comparable in vitro performance to the reference product. CAB analysis suggested that adhesion of all FP batches to lactose was different, with batch D showing greatest and batch A least adhesion to lactose. Test DPI formulations were manufactured using four different batches of FP with milled or sieved lactose, and showed that batch A FP formulated with sieved lactose in MOD MH 2 device demonstrated the highest degree of similarity to the Accuhaler® in vitro deposition. Application of CFD modelling and material characterization of formulation raw materials enabled the modification of device and formulation critical material attributes to create an in vitro comparable device/formulation system to the reference product.

Defining the critical material attributes of lactose monohydrate in carrier based dry powder inhaler formulations using artificial neural networks

The study aimed to establish a function-based relationship between the physical and bulk properties of pre-blended mixtures of fine and coarse lactose grades with the in vitro performance of an adhesive active pharmaceutical ingredient (API). Different grades of micronised and milled lactose (Lactohale (LH) LH300, LH230, LH210 and Sorbolac 400) were pre-blended with coarse grades of lactose (LH100, LH206 and Respitose SV010) at concentrations of 2.5, 5, 10 and 20 wt.%. The bulk and rheological properties and particle size distributions were characterised. The pre-blends were formulated with micronised budesonide and in vitro performance in a Cyclohaler device tested using a next-generation impactor (NGI) at 90 l/min. Correlations between the lactose properties and in vitro performance were established using linear regression and artificial neural network (ANN) analyses. The addition of milled and micronised lactose fines with the coarse lactose had a significant influence on physical and rheological properties of the bulk lactose. Formulations of the different pre-blends with budesonide directly influenced in vitro performance attributes including fine particle fraction, mass median aerodynamic diameter and pre-separator deposition. While linear regression suggested a number of physical and bulk properties may influence in vitro performance, ANN analysis suggested the critical parameters in describing in vitro deposition patterns were the relative concentrations of lactose fines % < 4.5 μm and % < 15 μm. These data suggest that, for an adhesive API, the proportion of fine particles below % < 4.5 μm and % < 15 μm could be used in rational dry powder inhaler formulation design.

Feasibility of haloperidol-anchored albumin nanoparticles loaded with doxorubicin as dry powder inhaler for pulmonary delivery

Haloperidol (Hal) is a ligand that can target sigma 2 receptors over-expressed in non-small cell lung cancer. Hal targeted nanoparticles of bovine serum albumin (BSA) were prepared for pulmonary delivery of doxorubicin (DOX). The conjugation was confirmed by Fourier transform infrared spectroscopy (FTIR) and (1)H nuclear magnetic resonance ((1)H NMR) spectroscopic methods. Nanoparticles were prepared by desolvation method from BSA-Hal and were loaded with DOX. They were characterized for their morphology, particle size, zeta potential, drug loading and release efficiency. The optimized nanoparticles were spray-dried using trehalose, l-leucin and mannitol as dry powder inhaler (DPI) in different inlet temperatures between 80 and 120°C. The obtained nanocomposites were characterized for their aerodynamic diameter, specific surface area (cm(2)/g) and fine particle fraction (FPF) by a Cascade Impactor device. The optimized nanoparticles showed particle size of 218 nm, zeta potential of -25.4 mV, drug entrapment efficiency of 89% and release efficiency of 56% until 2 h. After spray drying of these nanoparticles, the best results were obtained from mannitol with an inlet temperature of 80°C which produced a mean aerodynamic diameter of 4.58 μm, FPF of 66% and specific surface area of 6302.99 cm(2)/g. The obtained results suggest that the designed DPI could be a suitable inhaler for targeted delivery of DOX in pulmonary delivery.

Drug content effects on the dispersion performance of adhesive mixtures for inhalation

The drug content in adhesive mixtures for inhalation is known to influence their dispersion performance, but the direction and magnitude of this influence depends on other variables. In the past decades several mechanisms have been postulated to explain this finding and a number of possible interacting variables have been identified. Still, the role of drug content in the formulation of adhesive mixtures for inhalation, which includes its significance as an interacting variable to other parameters, is poorly understood. Therefore, the results from a series of drug detachment experiments are presented in which the effect of drug content and its dependence on flow rate, the mixing time and the type of drug is studied. Furthermore, it is investigated whether the effect depends on the range within which the drug content is changed. Quantitative and qualitative multiple order interactions are observed between these variables, which may be explained by a shifting balance between three different mechanisms. The results therefore demonstrate that accounting for (multiple order) interactions between variables has to be part of quality by design activities and the rational design of future experiments.

Effect of processing history on the surface interfacial properties of budesonide in carrier-based dry-powder inhalers

Influence of air-jet micronization, post-micronization conditioning and storage on the surface properties of budesonide in dry-powder inhaler formulations was investigated. Crystalline budesonide was air jet-micronized and conditioned using organic vapor. Particle engineering was also used to fabricate respirable particles of budesonide. Surface imaging by atomic force microscopy suggested that micronized material possessed process-induced surface disorder, which relaxed upon conditioning with organic vapor. Particle engineered material was devoid of such surface disorder. Surface interfacial properties of all batches were different and correlated to in vitro fine particle delivery. The surface properties and in vitro performance of the conditioned material changed upon storage of the budesonide at 44% relative humidity and 25°C, while the micronized and particle-engineered material remained stable. These data suggest that processing conditions of budesonide affected the surface properties of the material, which was demonstrated to have direct affect on dry-powder inhaler formulation performance.

Rapid characterisation of the inherent dispersibility of respirable powders using dry dispersion laser diffraction

Understanding and controlling powder de-agglomeration is of great importance in the development of dry powder inhaler (DPI) products. Dry dispersion laser diffraction measures particle size readily under controlled dispersing conditions, but has not been exploited fully to characterise inherent powder dispersibility. The aim of the study was to utilise particle size-dispersing pressure titration curves to characterise powder cohesivity and ease of de-agglomeration. Seven inhaled drug/excipient powders (beclometasone dipropionate, budesonide, fluticasone propionate, lactohale 300, salbutamol base, salmeterol xinafoate and tofimilast) were subjected to a range of dispersing pressures (0.2-4.5 Bar) in the Sympatec HELOS/RODOS laser diffractometer and particle size measurements were recorded. Particle size-primary pressure data were used to determine the pressures required for complete de-agglomeration. The latter were employed as an index of the cohesive strength of the powder (critical primary pressure; CPP), and the curves were modelled empirically to derive the pressure required for 50% de-agglomeration (DA₅₀). The powders presented a range of CPP (1.0-3.5 Bar) and DA₅₀ (0.23-1.45 Bar) which appeared to be characteristic for different mechanisms of powder de-agglomeration. This approach has utility as a rapid pre-formulation tool to measure inherent powder dispersibility, in order to direct the development strategy of DPI products.

The effect of engineered mannitol-lactose mixture on dry powder inhaler performance

PURPOSE

To co-crystallise mannitol and lactose with a view to obtaining crystals with more favourable morphological features than either lactose or mannitol alone, suitable for use as carriers in formulations for dry powder inhalers (DPIs) using simultaneous engineering of lactose-mannitol mixtures.

METHODS

Mannitol and lactose individually and the two sugars with three different ratios were crystallised/co-crystallised using anti-solvent precipitation technique. Obtained crystals were sieved to separate 63-90 μm size fractions and then characterised by size, shape, density and in vitro aerosolisation performance. Solid state of crystallized samples was studied using FT-IR, XRPD and DSC.

RESULTS

At unequal ratios of mannitol to lactose, the elongated shape dominated in the crystallisation process. However, lactose exerted an opposite effect to that of mannitol by reducing elongation ratio and increasing the crystals' width and thickness. Crystallised β-lactose showed different anomers compared to commercial lactose (α-lactose monohydrate). Crystallised α-mannitol showed different polymorphic form compared to commercial mannitol (β-mannitol). Crystallised mannitol:lactose showed up to 5 transitions corresponding to α-mannitol, α-lactose monohydrate, β-lactose, 5α-/3β-lactose and 4α-/1β-lactose. In vitro deposition assessments showed that crystallised carriers produced more efficient delivery of salbutamol sulphate compared to formulations containing commercial grade carriers.

CONCLUSION

The simultaneous crystallization of lactose-mannitol can be used as a new approach to improve the performance of DPI formulations.

Advanced microscopy techniques to assess solid-state properties of inhalation medicines

Efficient control and characterisation of the physico-chemical properties of active pharmaceutical ingredients (APIs) and excipients for orally inhaled drug products (OIDPs) are critical to successful product development. Control and reduction of risk require the introduction of a material science based approach to product development and the use of advanced analytical tools in understanding how the solid-state properties of the input materials influence structure and product functionality. The key issues to be addressed, at a microscopic scale, are understanding how the critical quality attributes of input materials influence surface, interfacial and particulate interactions within OIDPs. This review offers an in-depth discussion on the use of advanced microscopy techniques in characterising of the solid-state properties of particulate materials for OIDPs. The review covers the fundamental principles of the techniques, instrumentation types, data interpretation and specific applications in relation to the product development of OIDPs.

Physico-chemical aspects of lactose for inhalation

A dry powder inhaler (DPI) is a dosage form that consists of a powder formulation in a device which is designed to deliver an active ingredient to the respiratory tract. It has been extensively investigated over the past years and several aspects relating to device and particulate delivery mechanisms have been the focal points for debate. DPI formulations may or may not contain carrier particles but whenever a carrier is included in a commercial formulation, it is almost invariably lactose monohydrate. Many physicochemical properties of the lactose carrier particles have been reported to affect the efficiency of a DPI. A number of preparation methods have been developed which have been claimed to produce lactose carriers with characteristics which lead to improved deposition. Alongside these developments, a number of characterization methods have been developed which have been reported to be useful in the measurement of key properties of the particulate ingredients. This review describes the various physicochemical characteristics of lactose, methods of manufacturing lactose particulates and their characterization.

The use of inverse gas chromatography for the study of lactose and pharmaceutical materials used in dry powder inhalers

Inverse gas chromatography (IGC) is a sensitive technique for the measurement of powder surface properties, especially surface energetics. Given the importance of these characteristics to the performance of dry powder inhaler formulations (DPIs), it is unsurprising that IGC has been applied to the study of these systems. Monitoring batch-to-batch variation and the effects of processing steps are established uses of IGC in this field and the relevant studies are discussed. A less established use of IGC is for the prediction of DPI performance. Although some groups have found a negative relationship between the dispersive surface energy of one formulation component and fine particle delivery, such studies often have a number of limitations. More complex approaches have failed to produce consistent results. Further, more carefully designed, studies are required in this area. In the final section of this article, some areas for on-going research are discussed, including the need to critically assess the best method for the calculation of the specific free energy of adsorption with pharmaceutical materials.

A critical view on lactose-based drug formulation and device studies for dry powder inhalation: which are relevant and what interactions to expect?

Many years of research have not led to a profound knowledge of the mechanisms involved in the formulation and dispersion of carrier based mixtures for inhalation. Although it is well understood that the mixing is a key process in DPI carrier based formulation, there remains a limited understanding of how blending processes affect in-process material properties and the resulting distribution of the drug in the final dosage form. A great number of variables are considered relevant to the interfacial forces in adhesive mixtures, but their effects have mostly been investigated individually, without taking account of the influence they may have on each other. Interactions may be expected and without proper choices made and definitions given for all the variables involved, conclusions from studies on adhesive mixtures are of less relevance. By varying any of the variables that are not subject of the study, an opposite effect may be obtained. Currently, there is a strong focus on exploring techniques for the characterisation of drug and carrier surface properties that are believed to have an influence on the interparticulate forces in adhesive mixtures. For a number of surface properties it may be questioned whether they are really the key parameters to investigate however. Their orders of magnitude are subordinate to the effects they are supposed to have on the drug-to-carrier forces. Therefore, they seem rather indicators of other variability and their influence may be dominated by other effects. Finally, the relevance of inhaler design is often ignored. By using powerful inhalers, the effect of many variables of current concern may become less relevant. Carrier properties that are considered disadvantageous at present may even become desirable when a more appropriate type of dispersion force is applied. This can be shown for the effect of carrier surface rugosity when inertial separation forces are applied instead of the more widely applied lift and drag forces. Therefore, inhaler design should be taken into consideration when evaluating studies on adhesive mixtures. It should also become an integral part of powder formulation for inhalation.

Lactose characteristics and the generation of the aerosol

The delivery efficiency of dry-powder products for inhalation is dependent upon the drug formulation, the inhaler device, and the inhalation technique. Dry powder formulations are generally produced by mixing the micronised drug particles with larger carrier particles. These carrier particles are commonly lactose. The aerosol performance of a powder is highly dependent on the lactose characteristics, such as particle size distribution and shape and surface properties. Because lactose is the main component in these formulations, its selection is a crucial determinant of drug deposition into the lung, as interparticle forces may be affected by the carrier-particle properties. Therefore, the purpose of this article is to review the various grades of lactose, their production, and the methods of their characterisation. The origin of their adhesive and cohesive forces and their influence on aerosol generation are described, and the impact of the physicochemical properties of lactose on carrier-drug dispersion is discussed in detail.

Importance of powder residence time for the aerosol delivery performance of a commercial dry powder inhaler Aerolizer(®)

BACKGROUND

The performance of dry powder aerosol delivery systems depends not only on the powder formulation but also on the dry powder inhalers (DPIs). Effects of turbulence, grid, mouthpiece, inlet size, air flow, and capsule on the DPIs performance have been investigated previously. Considering powder dispersion in DPIs is a time-dependent process, the powder residence time in DPIs is supposed to have a great impact on DPIs efficiency. This study sought to investigate the effect of powder residence time on the performance of a commercial DPI Aerolizer(®).

METHODS

A standard Aerolizer(®) (SD) and five modified devices (MD1, MD2, MD3, MD4, and MD5) were employed for this research. Computational fluid dynamics analysis was used to calculate the flow field and the powder residence time in these devices. Recombinant human interleukin-2 inhalation powders and a twin impinger were used for the deposition experiment.

RESULTS

The powder mean residence time in the secondary atomization zone of the devices was increased from 0 ms for SD to 0.33, 0.96, 1.42, 1.76, and 2.14 ms for MD1, MD2, MD3, MD4, and MD5, respectively. At a flow rate of 60 L/min, with an increase in the powder residence time in these devices, a significant gradual and increasing trend in the powder respirable fraction was observed from 29.1%± 1.1% (MD1) to 32.6% ± 2.2% (MD2), 37.1% ± 1.1% (MD3), and 43.7% ± 2.1% (MD4). There was no significant difference in the powder respirable fraction between SD and MD1 or between MD4 and MD5.

CONCLUSIONS

Within a certain range, increasing the powder residence time could improve the performance of Aerolizer(®) by increasing the powder-air interaction time (the main reason) and increasing the powder-device compaction (the secondary reason). Combination of high turbulence level and sufficient powder residence time could further improve the device performance.