Short- and long-term stability study of lyophilized solid lipid nanoparticles for gene therapy

Solid Lipid Nanoparticles for Pulmonary Delivery of Biopharmaceuticals: A Review of Opportunities, Challenges, and Delivery Applications

Biopharmaceuticals such as nucleic acids, proteins, and peptides constitute a new array of treatment modalities for chronic ailments. Invasive routes remain the mainstay of administering biopharmaceuticals due to their labile nature in the biological environment. However, it is not preferred for long-term therapy due to the lack of patient adherence and clinical suitability. Therefore, alternative routes of administration are sought to utilize novel biopharmaceutical therapies to their utmost potential. Nanoparticle-mediated pulmonary delivery of biologics can facilitate both local and systemic disorders. Solid lipid nanoparticles (SLNs) afford many opportunities as pulmonary carriers due to their physicochemical stability and ability to incorporate both hydrophilic and hydrophobic moieties, thus allowing novel combinatorial drug/gene therapies. These applications include pulmonary infections, lung cancer, and cystic fibrosis, while systemic delivery of biomolecules, like insulin, is also attractive for the treatment of chronic ailments. This Review explores physiological and particle-associated factors affecting pulmonary delivery of biopharmaceuticals. It compares the advantages and limitations of SLNs as pulmonary nanocarriers along with design improvements underway to overcome these limitations. Current research illustrating various SLN designs to deliver proteins, peptides, plasmids, oligonucleotides, siRNA, and mRNA is also summarized.

Optimization, In Vitro and Ex Vivo Assessment of Nanotransferosome Gels Infused with a Methanolic Extract of Solanum xanthocarpum for the Topical Treatment of Psoriasis

The goal of this investigation is to improve the topical delivery of medicine by preparing and maximizing the potential of a nanotransferosome gel infused with Solanum xanthocarpum methanolic extract (SXE) to provide localized and regulated distribution. Thin-film hydration was used to create SXE-infused nanotransferosomes (SXE-NTFs), and a Box-Behnken design was used to improve them. Phospholipon 90G (X1), cholesterol (X2) and sodium cholate (X3) were chosen as the independent variables, and their effects on vesicle size (Y1), polydispersity index (PDI) (Y2) and the percentage of entrapment efficiency (EE) (Y3) were observed both individually and in combination. For the SXE-NTFs, the vesicle size was 146.3 nm, the PDI was 0.2594, the EE was 82.24 ± 2.64%, the drug-loading capacity was 8.367 ± 0.07% and the drug release rate was 78.86 ± 5.24%. Comparing the antioxidant activity to conventional ascorbic acid, it was determined to be 83.51 ± 3.27%. Ex vivo permeation tests revealed that the SXE-NTF gel (82.86 ± 2.38%) considerably outperformed the SXE gel (35.28 ± 1.62%) in terms of permeation. In addition, it seemed from the confocal laser scanning microscopy (CLSM) picture of the Wistar rat's skin that the rhodamine-B-loaded SXE-NTF gel had a higher penetration capability than the control. Dermatokinetic studies showed that the SXE-NTF gel had a better retention capability than the SXE gel. According to the experimental results, the SXE-NTF gel is a promising and successful topical delivery formulation.

The Road towards Gene Therapy for X-Linked Juvenile Retinoschisis: A Systematic Review of Preclinical Gene Therapy in Cell-Based and Rodent Models of XLRS

X-linked juvenile retinoschisis (XLRS) is an early-onset progressive inherited retinopathy affecting males. It is characterized by abnormalities in the macula, with formation of cystoid retinal cavities, frequently accompanied by splitting of the retinal layers, impaired synaptic transmission of visual signals, and associated loss of visual acuity. XLRS is caused by loss-of-function mutations in the retinoschisin gene located on the X chromosome (RS1, MIM 30083). While proof-of-concept studies for gene augmentation therapy have been promising in in vitro and rodent models, clinical trials in XLRS patients have not been successful thus far. We performed a systematic literature investigation using search strings related to XLRS and gene therapy in in vivo and in vitro models. Three rounds of screening (title/abstract, full text and qualitative) were performed by two independent reviewers until consensus was reached. Characteristics related to study design and intervention were extracted from all studies. Results were divided into studies using (1) viral and (2) non-viral therapies. All in vivo rodent studies that used viral vectors were assessed for quality and risk of bias using the SYRCLE's risk-of-bias tool. Studies using alternative and non-viral delivery techniques, either in vivo or in vitro, were extracted and reviewed qualitatively, given the diverse and dispersed nature of the information. For in-depth analysis of in vivo studies using viral vectors, outcome data for optical coherence tomography (OCT), immunohistopathology and electroretinography (ERG) were extracted. Meta-analyses were performed on the effect of recombinant adeno-associated viral vector (AAV)-mediated gene augmentation therapies on a- and b-wave amplitude as well as the ratio between b- and a-wave amplitudes (b/a-ratio) extracted from ERG data. Subgroup analyses and meta-regression were performed for model, dose, age at injection, follow-up time point and delivery method. Between-study heterogeneity was assessed with a Chi-square test of homogeneity (I2). We identified 25 studies that target RS1 and met our search string. A total of 19 of these studies reported rodent viral methods in vivo. Six of the 25 studies used non-viral or alternative delivery methods, either in vitro or in vivo. Of these, five studies described non-viral methods and one study described an alternative delivery method. The 19 aforementioned in vivo studies were assessed for risk of bias and quality assessments and showed inconsistency in reporting. This resulted in an unclear risk of bias in most included studies. All 19 studies used AAVs to deliver intact human or murine RS1 in rodent models for XLRS. Meta-analyses of a-wave amplitude, b-wave amplitude, and b/a-ratio showed that, overall, AAV-mediated gene augmentation therapy significantly ameliorated the disease phenotype on these parameters. Subgroup analyses and meta-regression showed significant correlations between b-wave amplitude effect size and dose, although between-study heterogeneity was high. This systematic review reiterates the high potential for gene therapy in XLRS, while highlighting the importance of careful preclinical study design and reporting. The establishment of a systematic approach in these studies is essential to effectively translate this knowledge into novel and improved treatment alternatives.

The Effect of Cryoprotectants and Storage Conditions on the Transfection Efficiency, Stability, and Safety of Lipid-Based Nanoparticles for mRNA and DNA Delivery

Lipid-based nanoparticles have recently shown great promise, establishing themselves as the gold standard in delivering novel RNA therapeutics. However, research on the effects of storage on their efficacy, safety, and stability is still lacking. Herein, the impact of storage temperature on two types of lipid-based nanocarriers, lipid nanoparticles (LNPs) and receptor-targeted nanoparticles (RTNs), loaded with either DNA or messenger RNA (mRNA), is explored and the effects of different cryoprotectants on the stability and efficacy of the formulations are investigated. The medium-term stability of the nanoparticles was evaluated by monitoring their physicochemical characteristics, entrapment and transfection efficiency, every two weeks over one month. It is demonstrated, that the use of cryoprotectants protects nanoparticles against loss of function and degradation in all storage conditions. Moreover, it is shown that the addition of sucrose enables all nanoparticles to remain stable and maintain their efficacy for up to a month when stored at -80 °C, regardless of cargo or type of nanoparticle. DNA-loaded nanoparticles also remain stable in a wider variety of storage conditions than mRNA-loaded ones. Importantly, these novel LNPs show increased GFP expression that can signify their future use in gene therapies, beyond the established role of LNPs in RNA therapeutics.

Levan nanoparticles with intrinsic CD44-targeting ability for tumor-targeted drug delivery

Existing anticancer therapeutics exhibit short half-lives, non-specificity, and severe side effects. To address this, active-targeting nanoparticles have been developed; however, the complex fabrication procedures, scale-up, and low reproducibility delay FDA approval, particularly for functionalized nanoparticles. We developed levan nanoparticles via simple one-pot nanoprecipitation for specific anticancer drug delivery. Levan is a plant polysaccharide which has a binding affinity to CD44 receptors and amphiphilicity. The nanoparticles are self-assembled and enable active-targeting without chemical modifications. The paclitaxel-loaded levan nanoparticles (PTX@LevNP) demonstrated a sustained PTX release and long-term stability. The LevNP can bind CD44 receptors on cancer cells, and PTX@LevNP showed enhanced anticancer activity in CD44-positive cells (SCC7 cells). In SCC7 tumor-bearing mice, the accumulation of LevNP in tumor tissue was 3.7 times higher than that of the free-dye, resulting in improved anticancer efficacy of PTX@LevNP. This new strategy using levan can produce nanoparticles for effective cancer treatment without complex fabrication procedures.

Optimization of the different phases of the freeze-drying process of solid lipid nanoparticles using experimental designs

In this work, the effect of cryoprotectant type and concentration and freeze-drying process parameters were evaluated to determine an optimal freeze-drying process for celecoxib-loaded solid lipid nanoparticles. Different cryoprotectants were tested at different weight ratios (cryoprotectant:lipid). Trehalose, maltose, and sucrose at a 1:1 wt ratio were selected for further use in optimizing the freeze-drying process through experimental designs to accurately define the freezing, primary, and secondary drying conditions of the freeze-drying process. The optimal freeze-dried solid lipid nanoparticles were subjected to a 6-month stability study at either 4 °C or 25 °C/60% RH, resulting in significant growth when the nanoparticles were stored at 25 °C/60% RH. The best results were obtained with trehalose as a cryoprotectant and storage at 4 °C. Furthermore, the in vitro release data showed a significantly different release profile before and after optimization of the freeze-drying process, suggesting that the optimization of the freeze-drying process affected the quality of the freeze-dried cake. In conclusion, a successful lyophilization process was obtained due to rational cooperation between a good formulation and optimal conditions in the freezing and drying steps. This yielded an acceptable non-collapsed freeze-dried cake with good redispersibility, minimal changes in physicochemical properties, and long-term stability at 4 °C.

Design of lipid-based nanoparticles for delivery of therapeutic nucleic acids

The successful development of nonviral delivery systems for nucleic acids has been reported extensively over the past number of years. Among them, lipid-based nanoparticles (LNPs) represent the most advanced platform. This review provides an overview of the state-of-the-art in LNP technology, focusing on the delivery of a range of nucleic acids. Recent advances in the development of an efficient and safe lipid-based system are critically analyzed with a particular emphasis on the rationale behind the design of LNPs and on attempts to elucidate the resulting molecular assembly and structure, their interactions with cellular proteins and biodistribution. In addition, manufacturing methods including microfluidics and their potential to influence stability and scale-up are summarized.

Impact of formulation design and lyophilisation on the physicochemical characteristics of finasteride nanosystems

The fundamental purpose of this study was to develop a stable lyophilised finasteride nanosystem (FNS-NS) for topical delivery. The FNS-NS was fabricated using an ultrasonication technique. The impact of two different cryoprotectants on the physicochemical characteristics of FNS-NS before and after lyophilisation was thoroughly investigated. The lyophilised FNS-NS had spherical shape with particle size lied between 188.6 nm ± 4.4 and 298.7 nm ± 4.7, low PDI values (0.26 ± 0.02 to 0.32 ± 0.02) and zeta potential ranging from -38.3 to +53.3 mV. The confocal laser microscopy depicted a comparatively higher cellular internalisation achieved for undecorated FNS-NS with respect to its chitosan-decorated counterpart. The lyophilised FNS-NS was stable for 90 days at proper storage conditions. The FNS-NS with 15% trehalose had appropriate physicochemical attributes that could be a promising carrier for topical delivery to treat androgenic alopecia.

Formulation development of lipid polymer hybrid nanoparticles of doxorubicin and its in-vitro, in-vivo and computational evaluation

The purpose of this study was to assess the parameters of doxorubicin (DOX) loaded lipid polymer hybrid nanoparticles (LPHNs) formulation development, and then the bioavailability of DOX were determined in the rabbit model, in order to evaluate the intrinsic outcome of dosage form improvement after the oral administration. LPHNs were prepared by combine approach, using both magnetic stirring and probe sonication followed by its characterization in terms of size-distribution (Zeta Size), entrapment efficiency (EE), loading capacity, and the kinetics of DOX. LPHNPs were further characterized by using scanning electron microscopy (SEM), powder X-Ray diffractometry (P-XRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), in vitro and in vivo studies. The molecular modeling was determined through the density functional theory (DFT) simulations and interactions. DOX loaded and unloaded LPHNs were administered orally to the rabbits for bioavailability and pharmacokinetic parameters determinations. The plasma concentration of DOX was determined through high performance liquid chromatography (HPLC). The average size of DOX-loaded LPHNs was 121.90 ± 3.0 nm. The drug loading of DOX was 0.391% ± 0.01 of aqueous dispersion, where its encapsulation efficiency was 95.5% ± 1.39. After oral administration of the DOX-LPHNs, the area under the plasma drug concentration-time curve (AUC) improved about 2-folds comparatively (p < 0.05). DFT simulations were used to understand the interactions of polymers with different sites of DOX molecule. The larger negative binding energies (-9.33 to -18.53 kcal/mol) of the different complexes evince that the polymers have stronger affinity to bind with the DOX molecule while the negative values shows that the process is spontaneous, and the synthesis of DOX-LPHNs is energetically favorable. It was concluded that DOX-LPHNs provides a promising new formulation that can enhance the oral bioavailability, which have optimized compatibilities and improve the pharmacokinetic of DOX after oral administration.

Transdermal delivery of allopurinol-loaded nanostructured lipid carrier in the treatment of gout

BACKGROUND

Allopurinol (ALP), a xanthine oxidase inhibitor, is a first line drug for the treatment of gout and hyperuricemia. Being the member of BCS class II drugs, ALP has solubility problem, which affects its bioavailability. Also, ALP has shorter half-life and showed GI related problems. In present study, ALP was encapsulated in nanostructured lipid carriers (NLCs) to ensure enhanced bioavailability, improved efficacy and safety in vivo.

METHODOLOGY

ALP-loaded NLCs were fabricated by micro-emulsion technique. The prepared NLCs were optimized via design expert in term of particle size, zeta potential and entrapment efficiency. FTIR, PXRD and TEM analysis were carried out to check chemical interaction, polymorphic form and surface morphology of the optimized formulation. ALP-loaded NLCs were then loaded into HPMC based poloxamer-407 gel and were characterized. In vitro and ex vivo analysis were carried out via dialysis membrane method and franz diffusion cell, respectively. Uric acid was used for induction of gout and the anti-gout activity of ALP-loaded NLCs gel was performed and compared with ALP suspension.

RESULTS

The optimized formulation had particles in nano-range (238.13 nm) with suitable zeta potential (-31.5 mV), poly-dispersity index (0.115) and entrapment of 87.24%. FTIR results confirmed absence of chemical interaction among formulation ingredients. XRD indicated amorphous nature of ALP-loaded NLCs, whereas TEM analysis confirmed spherical morphology of nanoparticles. The optimized formulation was successfully loaded in to gel and characterized accordingly. The in vitro release and drug release kinetics models showed sustained release of the drug from ALP-loaded NLCs gel. Furthermore, about 28 fold enhanced permeation was observed from ALP-loaded NLCs gel as compared to conventional gel. Skin irritation study disclosed safety of ALP-loaded NLCs gel for transdermal application. Furthermore, ALP-loaded NLCs gel showed significantly enhanced anti-gout activity in Sprague-Dawley rats after transdermal administration as compared to oral ALP suspension.

CONCLUSION

ALP-loaded NLCs gel after transdermal administration sustained the drug release, avoid gastrointestinal side effects and enhance the anti-gout performance of ALP. It can be concluded, that NLCs have the potential to deliver drugs via transdermal route as indicated in case of allopurinol.

In Vitro and Ex Vivo Evaluation of Fluocinolone Acetonide-Acitretin-Coloaded Nanostructured Lipid Carriers for Topical Treatment of Psoriasis

Psoriasis is chronic autoimmune disease that affects 2-5% of the global population. Fluocinolone acetonide (FLU) and acitretin (ACT) are widely used antipsoriatic drugs that belong to BCS classes II and IV, respectively. FLU exhibits side effects, such as skin irritation and a burning sensation. ACT also shows adverse effects, such as gingivitis, teratogenic effects and xerophthalmia. In the present study, topical nanostructured lipid carriers (NLCs) were fabricated to reduce the side effects and enhance the therapeutic efficacy. FLU-ACT-coloaded NLCs were prepared by the modified microemulsion method and optimized by the Box-Behnken model of Design Expert® version 12. The optimization was based on the particle size (PS), zeta potential (ZP) and percentage of encapsulation efficiency (%EE). The physicochemical analyses were performed by TEM, FTIR, XRD and DSC to assess the morphology, chemical interactions between excipients, crystallinity and thermal behavior of the optimized FLU-ACT-coloaded NLCs. The FLU-ACT-coloaded NLCs were successfully loaded into gel and characterized appropriately. The dialysis bag method and Franz diffusion cells were used for the in vitro release and ex vivo permeation studies, respectively. The optimized FLU-ACT-coloaded NLCs had the desired particle size of 288.2 ± 2.3 nm, ZP of -34.2 ± 1.0 mV and %EE values of 81.6 ± 1.1% for ACT and 75 ± 1.3% for FLU. The TEM results confirmed the spherical morphology, while the FTIR results showed the absence of chemical interactions of any type among the ingredients of the FLU-ACT-coloaded NLCs. The XRD and DSC analyses confirmed the amorphous nature and thermal behavior. The in vitro study showed the sustained release of the FLU and ACT from the optimized FLU-ACT-coloaded NLCs and FLU-ACT-coloaded NLC gel compared with the FLU-ACT suspension and conventional gel. The ex vivo study confirmed the minimal permeation of both drugs from the FLU-ACT-coloaded NLC gel.

Chondroitin sulfate-based composites: a tour d'horizon of their biomedical applications

Chondroitin sulfate (CS), a natural anionic mucopolysaccharide, belonging to the glycosaminoglycan family, acts as the primary element of the extracellular matrix (ECM) of diverse organisms. It comprises repeating units of disaccharides possessing β-1,3-linked N-acetyl galactosamine (GalNAc), and β-1,4-linked D-glucuronic acid (GlcA), and exhibits antitumor, anti-inflammatory, anti-coagulant, anti-oxidant, and anti-thrombogenic activities. It is a naturally acquired bio-macromolecule with beneficial properties, such as biocompatibility, biodegradability, and immensely low toxicity, making it the center of attention in developing biomaterials for various biomedical applications. The authors have discussed the structure, unique properties, and extraction source of CS in the initial section of this review. Further, the current investigations on applications of CS-based composites in various biomedical fields, focusing on delivering active pharmaceutical compounds, tissue engineering, and wound healing, are discussed critically. In addition, the manuscript throws light on preclinical and clinical studies associated with CS composites. A short section on Chondroitinase ABC has also been canvassed. Finally, this review emphasizes the current challenges and prospects of CS in various biomedical fields.

A self-amplifying RNA vaccine against COVID-19 with long-term room-temperature stability

mRNA vaccines were the first to be authorized for use against SARS-CoV-2 and have since demonstrated high efficacy against serious illness and death. However, limitations in these vaccines have been recognized due to their requirement for cold storage, short durability of protection, and lack of access in low-resource regions. We have developed an easily-manufactured, potent self-amplifying RNA (saRNA) vaccine against SARS-CoV-2 that is stable at room temperature. This saRNA vaccine is formulated with a nanostructured lipid carrier (NLC), providing stability, ease of manufacturing, and protection against degradation. In preclinical studies, this saRNA/NLC vaccine induced strong humoral immunity, as demonstrated by high pseudovirus neutralization titers to the Alpha, Beta, and Delta variants of concern and induction of bone marrow-resident antibody-secreting cells. Robust Th1-biased T-cell responses were also observed after prime or homologous prime-boost in mice. Notably, the saRNA/NLC platform demonstrated thermostability when stored lyophilized at room temperature for at least 6 months and at refrigerated temperatures for at least 10 months. Taken together, this saRNA delivered by NLC represents a potential improvement in RNA technology that could allow wider access to RNA vaccines for the current COVID-19 and future pandemics.

Freeze-drying for the preservation of immunoengineering products

Immunoengineering technologies harness the power of immune system modulators such as monoclonal antibodies, cytokines, and vaccines to treat myriad diseases. Immunoengineering innovations have showed great promise in various practices including oncology, infectious disease, autoimmune diseases, and transplantation. Despite the countless successes, the majority of immunoengineering products contain active moieties that are prone to instability. The current review aims to feature freeze-drying as a robust and scalable solution to the inherent stability challenges in immunoengineering products by preventing the active moiety from degradation. Furthermore, this review describes the stability issues related to immunoengineering products and the utility of the lyophilization process to preserve the integrity and efficacy of immunoengineering tools ranging from biologics to nanoparticle-based vaccines. The concept of the freeze-drying process is described highlighting the quality by design (QbD) for robust process optimization. Case studies of lyophilized immunoengineering technologies and relevant clinical studies using immunoengineering products are discussed.

Lipid-Polymer Hybrid "Particle-in-Particle" Nanostructure Gene Delivery Platform Explored for Lyophilizable DNA and mRNA COVID-19 Vaccines

SARS-CoV-2 has led to a worldwide pandemic, catastrophically impacting public health and the global economy. Herein, a new class of lipid-modified polymer poly (β-amino esters) (L-PBAEs) is developed via enzyme-catalyzed esterification and further formulation of the L-PBAEs with poly(d,l-lactide-coglycolide)-b-poly(ethylene glycol) (PLGA-PEG) leads to self-assembly into a "particle-in-particle" (PNP) nanostructure for gene delivery. Out of 24 PNP candidates, the top-performing PNP/C12-PBAE nanoparticles efficiently deliver both DNA and mRNA in vitro and in vivo, presenting enhanced transfection efficacy, sustained gene release behavior, and excellent stability for at least 12 months of storage at -20 °C after lyophilization without loss of transfection efficacy. Encapsulated with spike encoded plasmid DNA and mRNA, the lipid-modified polymeric PNP COVID-19 vaccines successfully elicit spike-specific antibodies and Th1-biased T cell immune responses in immunized mice even after 12 months of lyophilized storage at -20 °C. This newly developed lipid-polymer hybrid PNP nanoparticle system demonstrates a new strategy for both plasmid DNA and mRNA delivery with the capability of long-term lyophilized storage.

Nanomedicine for the Delivery of RNA in Cancer

The complexity, and the diversity of the different types of cancers allied to the tendency to form metastasis make treatment efficiency so tricky and often impossible due to the advanced stage of the disease in the diagnosis. In recent years, due to tremendous scientific breakthroughs, we have witnessed exponential growth in the elucidation of mechanisms that underlie carcinogenesis and metastasis. The development of more selective therapies made it possible to improve cancer treatment. Although interdisciplinary research leads to encouraging results, scientists still have a long exploration journey. RNA technology represents a promise as a therapeutic intervention for targeted gene silencing in cancer, and there are already some RNA-based formulations in clinical trials. However, the use of RNA as a therapeutic tool presents severe limitations, mainly related to its low stability and poor cellular uptake. Thus, the use of nanomedicine employing nanoparticles to encapsulate RNA may represent a suitable platform to address the major challenges hampering its therapeutic application. In this review, we have revisited the potential of RNA and RNA-associated therapies to fight cancer, also providing, as support, a general overview of nanoplatforms for RNA delivery.

Microfluidics Technology for the Design and Formulation of Nanomedicines

In conventional drug administration, drug molecules cross multiple biological barriers, distribute randomly in the tissues, and can release insufficient concentrations at the desired pathological site. Controlling the delivery of the molecules can increase the concentration of the drug in the desired location, leading to improved efficacy, and reducing the unwanted effects of the molecules under investigation. Nanoparticles (NPs), have shown a distinctive potential in targeting drugs due to their unique properties, such as large surface area and quantum properties. A variety of NPs have been used over the years for the encapsulation of different drugs and biologics, acting as drug carriers, including lipid-based and polymeric NPs. Applying NP platforms in medicines significantly improves the disease diagnosis and therapy. Several conventional methods have been used for the manufacturing of drug loaded NPs, with conventional manufacturing methods having several limitations, leading to multiple drawbacks, including NPs with large particle size and broad size distribution (high polydispersity index), besides the unreproducible formulation and high batch-to-batch variability. Therefore, new methods such as microfluidics (MFs) need to be investigated more thoroughly. MFs, is a novel manufacturing method that uses microchannels to produce a size-controlled and monodispersed NP formulation. In this review, different formulation methods of polymeric and lipid-based NPs will be discussed, emphasizing the different manufacturing methods and their advantages and limitations and how microfluidics has the capacity to overcome these limitations and improve the role of NPs as an effective drug delivery system.

Curcumin-tannic acid-poloxamer nanoassemblies enhance curcumin's uptake and bioactivity against cancer cells in vitro

Curcumin (CUR) is a bioactive natural compound with potent antioxidant and anticancer properties. However, its poor water solubility has been a major limitation against its widespread clinical use. The aim of this study was to develop a nanoscale formulation for CUR to improve its solubility and potentially enhance its bioactivity, by leveraging the self-assembly behavior of tannic acid (TA) and amphiphilic poloxamers to form CUR-entrapped nanoassemblies. To optimize drug loading, formulation variables included the CUR: TA ratio and the type of amphiphilic polymer (Pluronic® F-127 or Pluronic® P-123). The optimal CUR nanoparticles (NPs) were around 200 nm in size with a high degree of monodispersity and 56% entrapment efficiency. Infrared spectroscopy confirmed the presence of intermolecular interactions between CUR and the NP formulation components. X-ray diffraction revealed that CUR was entrapped in the NPs in an amorphous state. The NPs maintained excellent colloidal stability under various conditions. In vitro release of CUR from the NPs showed a biphasic controlled release pattern up to 72 h. Antioxidant and antiproliferative assays against a panel of human cancer cell lines revealed significantly higher activity for CUR NPs compared to free CUR, particularly in MCF-7 and MDA-MB-231 breast cancer cells. This was attributed to greater cellular uptake of the NPs compared to the free drug as verified by confocal microscopy imaging and flow cytometry measurements. Our findings present a highly promising NP delivery platform for CUR prepared via a simple self-assembly process with the ability to potentiate its bioactivity in cancer and other diseases where oxidative stress is implicated.

Nanostructured lipid carriers (NLCs) as drug delivery platform: Advances in formulation and delivery strategies

NLCs have provoked the incessant impulsion for the development of safe and valuable drug delivery systems owing to their exceptional physicochemical and then biocompatible characteristics. Throughout the earlier period, a lot of studies recounting NLCs based formulations have been noticeably increased. They are binary system which contains both solid and liquid lipids aiming to produce less ordered lipidic core. Their constituents particularly influence the physicochemical properties and effectiveness of the final product. NLCs can be fabricated by different techniques which are classified according to consumed energy. More utilization NLCs is essential due to overcome barriers surrounded by the technological procedure of lipid-based nanocarriers' formulation and increased information of the core mechanisms of their transport via various routes of administration. They can be used in different applications and by different routes such as oral, cutaneous, ocular and pulmonary. This review article seeks to present an overview on the existing situation of the art of NLCs for future clinics through exposition of their applications which shall foster their lucid use. The reported records evidently demonstrate the promise of NLCs for innovate therapeutic applications in the future.

Use of Protamine in Nanopharmaceuticals-A Review

Macromolecular biomolecules are currently dethroning classical small molecule therapeutics because of their improved targeting and delivery properties. Protamine-a small polycationic peptide-represents a promising candidate. In nature, it binds and protects DNA against degradation during spermatogenesis due to electrostatic interactions between the negatively charged DNA-phosphate backbone and the positively charged protamine. Researchers are mimicking this technique to develop innovative nanopharmaceutical drug delivery systems, incorporating protamine as a carrier for biologically active components such as DNA or RNA. The first part of this review highlights ongoing investigations in the field of protamine-associated nanotechnology, discussing the self-assembling manufacturing process and nanoparticle engineering. Immune-modulating properties of protamine are those that lead to the second key part, which is protamine in novel vaccine technologies. Protamine-based RNA delivery systems in vaccines (some belong to the new class of mRNA-vaccines) against infectious disease and their use in cancer treatment are reviewed, and we provide an update on the current state of latest developments with protamine as pharmaceutical excipient for vaccines.

Freeze-drying of nanoparticles: How to overcome colloidal instability by formulation and process optimization

Lyophilization of nanoparticle (NP) suspensions is a promising technology to improve stability, especially during long-term storage, and offers new routes of administration in solid state. Although considered as a gentle drying process, freeze-drying is also known to cause several stresses leading to physical instability, e.g. aggregation, fusion, or content leakage. NPs are heterogeneous regarding their physico-chemical properties which renders them different in their sensitivity to lyophilization stress and upon storage. But still basic concepts can be deducted. We summarize basic colloidal stabilization mechanisms of NPs in the liquid and the dried state. Furthermore, we give information about stresses occurring during the freezing and the drying step of lyophilization. Subsequently, we review the most commonly investigated NP types including lipophilic, polymeric, or vesicular NPs regarding their particle properties, stabilization mechanisms in the liquid state, and important freeze-drying process, formulation and storage strategies. Finally, practical advice is provided to facilitate purposeful formulation and process development to achieve NP lyophilizates with high colloidal stability.

Adverse immunological responses against non-viral nanoparticle (NP) delivery systems in the lung

There is a large, unmet medical need to treat chronic obstructive pulmonary disease, asthma, idiopathic pulmonary fibrosis and other respiratory diseases. New modalities are being developed, including gene therapy which treats the disease at the DNA/RNA level. Despite recent innovations in non-viral gene therapy delivery for chronic respiratory diseases, unwanted or adverse interactions with immune cells, particularly macrophages, can limit drug efficacy. This review will examine the relationship between the design and fabrication of non-viral nucleic acid nanoparticle (NP) delivery systems and their ability to trigger unwanted immunogenic responses in lung tissues. NP formulated with peptides, lipids, synthetic and natural polymers provide a robust means of delivering the genetic cargos to the desired cells. However NP, or their components, may trigger local responses such as cell damage, edema, inflammation, and complement activation. These effects may be acute short-term reactions or chronic long-term effects like fibrosis, increased susceptibility to diseases, autoimmune disorders, and even cancer. This review examines the relationship between physicochemical properties, i.e. shape, charge, hydrophobicity, composition and stiffness, and interactions of NP with pulmonary immune cells. Inhalation is the ideal route of administration for direct delivery but inhaled NP encounter innate immune cells, such as alveolar macrophages (AM) and dendritic cells (DC), that perceive them as harmful foreign material, interfere with gene delivery to target cells, and can induce undesirable side effects. Recommendations for fabrication and formulation of gene therapies to avoid adverse immunological responses are given. These include fine tuning physicochemical properties, functionalization of the surface of NP to actively target diseased pulmonary cells and employing biomimetics to increase immunotolerance.

Novel redox-sensitive thiolated TPGS based nanoparticles for EGFR targeted lung cancer therapy

Novel glutathione (GSH) redox-sensitive thiolated vitaminE-PEG1000-succinate (TPGH-SH) was synthesized by conjugating TPGS with 4-amino thiophenol (4-ATP) and confirmed by FTIR and NMR studies. Following, docetaxel (DTX) loaded, cetuximab (CTB) conjugated redox sensitive TPGS-SH nanoparticles (TPGS-SH NP) were prepared by dialysis method and screened for size, charge, DTX entrapment, which revealed that size, surface charge and percent entrapment are in the range of 183-227 nm, +18 to +26 mV and 68-71%. SEM, TEM, AFM have reflected the spherical and uniform size of NP with a smooth surface. In-vitro release studies were performed in media containing different concentrations of GSH to study their effect on drug release and drug release of up to 94.5%, at pH 5.5, GSH 20 mM, is observed within 24 h. The pH/redox sensitivity studies revealed the better stability of NP at higher pH and lower GSH concentrations. In-vitro cytotoxicity, cellular uptake, migration and apoptotic assays, performed on A549 cells, have proved that targeted formulation produced higher cytotoxicity (significantly less IC50 value) and uptake and also prevented cell migration. Pharmacokinetic and histopathological screening were performed on CF rats, which demonstrated promising results. The in-vivo efficacy studies on benzo(a)pyrene induced mice lung cancer model showed that targeted TPGS-SH NP has significantly reduced the cell number than the model control.

Augmented cytotoxicity using the physical adsorption of Poloxamer 188 on allicin-loaded gelatin nanoparticles

OBJECTIVES

The aim of this work was to study the effect of the physically adsorbed Poloxamer 188 coating polymer on the cytotoxic activity of allicin-loaded gelatin nanoparticles.

METHODS

The double desolvation method was utilised to prepare the nanoparticles which were characterised for particle size (PS), polydispersity index (PDI) and zeta potential and visualised using transmission electron microscopy. The coating density of the used polymer was determined using 1H-nuclear magnetic resonance (1H-NMR); 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was used to evaluate the cytotoxicity on HepG-2 cell lines.

KEY FINDINGS

The particles were spherical possessing a PS of 714 ± 25.21 nm and a PDI of 0.663 ± 0.143. These results together with the 1H-NMR results analysis confirmed the efficient coating of Poloxamer 188. The coating of particles rendered them more cytotoxic, scoring an IC50 of 6.736 µm (2-folds lower than the uncoated counter parts and 4-folds lesser than the allicin solution), and apt for cancer-targeting. Moreover, the prepared nanoparticles were stable to gamma-sterilisation and to a storage of 12 months.

CONCLUSIONS

Augmented cytotoxicity on HepG-2 cell lines was obtained using the physical adsorption of an abundant and relatively cheap material, Poloxamer 188, on allicin-loaded gelatin nanoparticles.

Recuperating Biopharmaceutical Aspects of Amphotericin B and Paromomycin Using a Chitosan Functionalized Nanocarrier via Oral Route for Enhanced Anti-leishmanial Activity

The design and development of new pharmaceutical formulations for the existing anti-leishmanial is a new strategic alternate to improve efficacy and safety rather than new drug discovery. Herein hybrid solid lipid nanoparticles (SLN) have been engineered to direct the oral delivery of two anti-leishmanial drugs amphotericin B (AmB) and paromomycin (PM). The combinatorial nanocarriers consist of conventional SLN, antileishmanial drugs (AmB and PM) which have been functionalized with chitosan (Cs) grafted onto the external surface. The Cs-SLN have the mean particle size of 373.9 ± 1.41 nm, polydispersity index (PDI) of 0.342 ± 0.02 and the entrapment efficiency for AmB and PM was found to be 95.20 ± 3.19% and 89.45 ± 6.86 %, respectively. Characterization of SLN was performed by scanning electron microscopy and transmission electron microscopy. Complete internalization of the formulation was observed in Caco-2 cells. Cs-SLN has shown a controlled and slow drug release profile over a period of 72 h and was stable at gastrointestinal fluids, confirmed by simulated gastro-intestinal fluids study. Cs coating enhanced the mucoadhesive property of Cs-SLN. The in-vitro anti-leishmanial activity of Cs-SLN (1 μg/ml) has shown a maximum percentage of inhibition (92.35%) on intra-cellular amastigote growth of L. donovani.

Eluxadoline Loaded Solid Lipid Nanoparticles for Improved Colon Targeting in Rat Model of Ulcerative Colitis

The aim of the current study was to evaluate the therapeutics potential of eluxadoline (ELX) loaded solid lipid nanoparticles (SLNs) in ulcerative colitis. ELX loaded SLNs were prepared using three different lipids according to the solvent emulsification technique. The optimization of prepared SLNs (F1-F3) were carried out based on size, PDI, zeta potential, percent drug entrapment (%EE), and loading (%DL). The lipid (stearic acid) based SLNs (F2) was optimized with particle size (266.0 ± 6.4 nm), PDI (0.217 ± 0.04), zeta potential (31.2 ± 5.19 mV), EE (65.0 ± 4.8%), and DL (4.60 ± 0.8%). The optimized SLNs (F2) was further evaluated by DSC, FTIR, SEM, in vitro release, and stability studies, which confirmed the successful encapsulation of ELX in SLNs. The efficacy of optimized SLNs (F2) in comparison to the pure ELX drug was assessed in acetic acid induced colitis rat models. It was observed that the delivery of ELX by SLNs alleviated the induced acetic acid colitis significantly. Thus, ELX loaded SLNs delivery to the colon has a significant potential to be developed for the treatment of ulcerative colitis.

The Age of Cyclic Dinucleotide Vaccine Adjuvants

As prophylactic vaccine adjuvants for infectious diseases, cyclic dinucleotides (CDNs) induce safe, potent, long-lasting humoral and cellular memory responses in the systemic and mucosal compartments. As therapeutic cancer vaccine adjuvants, CDNs induce potent anti-tumor immunity, including cytotoxic T cells and NK cells activation that achieve durable regression in multiple mouse models of tumors. Clinical trials are ongoing to fulfill the promise of CDNs (ClinicalTrials.gov: NCT02675439, NCT03010176, NCT03172936, and NCT03937141). However, in October 2018, the first clinical data with Merck's CDN MK-1454 showed zero activity as a monotherapy in patients with solid tumors or lymphomas (NCT03010176). Lately, the clinical trial from Aduro's CDN ADU-S100 monotherapy was also disappointing (NCT03172936). The emerging hurdle in CDN vaccine development calls for a timely re-evaluation of our understanding on CDN vaccine adjuvants. Here, we review the status of CDN vaccine adjuvant research, including their superior adjuvant activities, in vivo mode of action, and confounding factors that affect their efficacy in humans. Lastly, we discuss the strategies to overcome the hurdle and advance promising CDN adjuvants in humans.

Improvising anti-leishmanial activity of amphotericin B and paromomycin using co-delivery in d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) tailored nano-lipid carrier system

In the current study, we have focused on the design, development and in-vitro evaluation of d-α-tocopheryl polyethylene glycol 1000 succinate modified amphotericin B (AmB) and paromomycin (PM) loaded solid lipid nanoparticles (TPGS-SLNPs) by emulsion-solvent evaporation method. The optimized TPGS-SLNPs had a mean particle size of 199.4 ± 18.9 nm with a polydispersity index of 0.22 ± 0.14 and entrapment efficiency for AmB and PM was found to be 94 ± 1.5 % and 89 ± 0.50 % respectively. The prepared lipid nanoparticles were characterized by Powdered X-ray diffraction study, Fourier transform infrared spectroscopy, Nuclear magnetic resonance spectroscopy to confirm the absence of any interaction between lipids and drugs. The developed formulation showed a sustained drug release over a period of 48 h and were stable at different temperatures. Finally, TPGS-SLNPs (1 μg/mL) was found to significantly (P < 0.001) mitigate the intra-cellular amastigote growth compared to free AmB. The results obtained suggest TPGS-SLNPs could be an efficient carrier for delivering poorly water-soluble drugs and efficiently enhance its therapeutic potential.

Long-term storage of lipid-like nanoparticles for mRNA delivery

Lipid-like nanoparticles (LLNs) have been extensively explored for messenger RNA (mRNA) delivery in various biomedical applications. However, the long-term storage of these nanoparticles is still a challenge for their clinical translation. In this study, we investigated a series of conditions for the long-term storage of LLNs with encapsulation of mRNA. We evaluated the stability of LLNs with different concentrations of cryoprotectants (sucrose, trehalose or mannitol) under the conditions of freezing or lyophilization processes. Through in vitro and in vivo mRNA delivery studies, we identified the optimal storage condition, and found that the addition with 5% (w/v) sucrose or trehalose to LLNs could remain their mRNA delivery efficiency for at least three months in the liquid nitrogen storage condition.

Scalable Manufacturing Processes for Solid Lipid Nanoparticles

BACKGROUND

Solid lipid nanoparticles offer a range of advantages as delivery systems but they are limited by effective manufacturing processes.

OBJECTIVE

In this study, we outline a high-throughput and scalable manufacturing process for solid lipid nanoparticles.

METHODS

The solid lipid nanoparticles were formulated from a combination of tristearin and 1,2-Distearoyl-phosphatidylethanolamine-methyl-polyethyleneglycol conjugate-2000 and manufactured using the M-110P Microfluidizer processor (Microfluidics Inc, Westwood, Massachusetts, US).

RESULTS

The manufacturing process was optimized in terms of the number of process cycles (1 to 5) and operating pressure (20,000 to 30,000 psi). The solid lipid nanoparticles were purified using tangential flow filtration and they were characterized in terms of their size, PDI, Z-potential and protein loading. At-line particle size monitoring was also incorporated within the process. Our results demonstrate that solid lipid nanoparticles can be effectively manufactured using this process at pressures of 20,000 psi with as little as 2 process passes, with purification and removal of non-entrapped protein achieved after 12 diafiltration cycles. Furthermore, the size could be effectively monitored at-line to allow rapid process control monitoring and product validation.

CONCLUSION

Using this method, protein-loaded solid lipid nanoparticles containing a low (1%) and high (16%) Pegylation were manufactured, purified and monitored for particle size using an at-line system demonstrating a scalable process for the manufacture of these nanoparticles.

Lyoprotectant Optimization for the Freeze-Drying of Receptor-Targeted Trojan Horse Liposomes for Plasmid DNA Delivery

Trojan horse liposomes (THLs) are a form of ligand-targeted nanomedicine, where a plasmid DNA is encapsulated in the interior of a 100-150 nm pegylated liposome, and the tips of a fraction of the surface pegylated strands are covalently linked to a receptor-specific monoclonal antibody (MAb) via a thio-ether linkage. The goal of this work was to develop a lyophilization methodology that enables retention of the structure and function of the THLs following the freeze-drying/hydration process. THL fusion and leakage of plasmid DNA were observed with several lyoprotectants, including trehalose, hyaluronic acid, γ-cyclodextrin, or sulfobutylether-β-cyclodextrin. However, the use of hydroxypropyl-γ-cyclodextrin, at a 40:1 wt/wt ratio relative to the THL phospholipid, eliminated liposome fusion and produced high retention of encapsulated plasmid DNA and THL-mediated gene expression after lyophilization followed by hydration. The freeze-dried THL cake was amorphous without cavitation, and the diameters and functional properties of the THLs were preserved following hydration of cakes stored for at least six months. Intravenous administration of the hydrated freeze-dried THLs in the Rhesus monkey demonstrated the safety of the formulation. Blood plasmid DNA was measured with a quantitative polymerase chain reaction method, which enabled a pharmacokinetics analysis of the blood clearance of the THL-encapsulated plasmid DNA in the primate. The work shows that optimization of the lyoprotectant enables long-term storage of the MAb-targeted DNA encapsulated liposomes in the freeze-dried state.

PLGA Porous Microspheres Dry Powders for Codelivery of Afatinib-Loaded Solid Lipid Nanoparticles and Paclitaxel: Novel Therapy for EGFR Tyrosine Kinase Inhibitors Resistant Nonsmall Cell Lung Cancer

Combination therapy of epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors (EGFR TKIs) with other chemotherapeutic agents is a feasible strategy to overcome resistance that often occurs after 9-13 months of EGFR TKIs administration in nonsmall cell lung cancer (NSCLC). In this study, a pulmonary microspheres system that codelivers afatinib and paclitaxel (PTX) is developed for treatment of EGFR TKIs resistant NSCLC. In this system, afatinib is loaded in stearic acid-based solid lipid nanoparticles, then these nanoparticles and PTX are loaded in poly-lactide-co-glycolide-based porous microspheres. These inhaled microspheres systems are characterized including geometric particle size, drug encapsulation efficiency, morphology by scanning electron microscopy, specific surface area, in vitro drug release, and aerodynamic particle size. Cell experiments indicate that afatinib and PTX have a synergistic effect and the codelivery system shows a superior treatment effect in drug-resistant NSCLC cells. The biocompatibility, pharmacokinetic, and tissue distribution experiments in Sprague-Dawley rats show that afatinib and PTX in the system can maintain 96 h of high lung concentration but low concentration in other tissues, with acceptable safety. These results demonstrate that this system may be a prospective delivery strategy for drug combination treatment in cancers developing resistance, especially drug-resistant lung cancer.

A simplified method for manufacturing RNAi therapeutics for local administration

RNA interference (RNAi) is one of the most promising strategies for cancer therapeutics. The successful translation of RNAi therapeutics to a clinic setting requires a delivery system that is efficient and simple to upscale. In this study, we devised a simple industrial method to manufacture lipoplex, which includes short hairpin RNA against the expression of thymidylate synthase (TS shRNA) - a key molecule for DNA biosynthesis. An aqueous solution of TS shRNA was gently mixed with either a precursor of cationic liposome (Presome DF-1) or a cationic lipid mixture in an o/w emulsion. This solution was subsequently lyophilized under optimal conditions to obtain either FD-lipoplex-1 or FD-lipoplex-2, respectively. With this method, a lipoplex in activated form was obtained via a simple "one-step" hydration with saline. Both forms of FD-lipoplex showed physicochemical properties comparable to those of conventional lipoplex. FD-lipoplexes stably retained TS shRNA within their formulations in the presence of tumor ascites fluid. Intraperitoneal treatment with either FD-lipoplex-1 or FD-lipoplex-2 provided a therapeutic level of efficacy comparable to that of conventional lipoplex in the treatment of a peritoneal disseminated gastric cancer mouse model. Collectively, established freeze-drying-based methods for RNAi-therapeutic preparation could realistically be used in a clinical setting for the treatment of patients with peritoneal disseminated cancer.

Systematic Development of Sertraline Loaded Solid Lipid Nanoparticle (SLN) by Emulsification-Ultrasonication Method and Pharmacokinetic Study in Sprague-Dawley Rats

OBJECTIVE

To circumvent the aforementioned problems and for the successful delivery of those newly discovered poorly soluble compounds, researchers have focused on the feasibility of biocompatible lipids such as Solid lipid nanoparticles (SLN) as carrier system.

BACKGROUND

Sertraline (SRT) is commercially available as hydrochloride salt. Poor bioavailability (around 44%) of hydrochloride salt is considered to be conversion of salts to free base in the gastrointestinal tract which retard it's absorption.

METHODS

Different batches of solid lipid nanoparticles (SLN) were prepared and on the basis of particle size, polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (EE), and drug loading capacity (L) an optimum system was designed.

RESULTS

The optimized formulation contains; 5% (w/v) Compritol® E ATO as lipids, 2.5% (w/v) Tween® 80 as surfactant and 0.1% (w/v) SRT as actives. The formulation was freeze-dried using mannitol as a cryoprotectant to control the aggregation of particles during redispersion process. SLN with <110 nm size, <0.2 PDI, >36 mV ZP, >72% EE, and nearly 0.7% L can be formed at appropriate formulation process conditions; homogenization time (HT) and sonication time (ST) at 5 min and 10 min, respectively. XRD studies indicated the presence of amorphous form of drug that is completely encapsulated within the nanoparticulate matrix system. The optimized SLN formulation have shown the highest value of zeta potential (-36.5 mV) confers stability of nanodispersion. Release of drug encapsulated in SLN showed a biphasic pattern and was extended upto 12 hours. The maximum plasma concentration (Cmax) and area under the curve (AUC) in case of sertraline loaded SLN were found 10-fold and 6-fold higher, respectively compared to pure drug.

CONCLUSION

The result depicted enhanced extent of absorption of sertraline from SLN compared to plain sertraline. Furthermore, sertraline-loaded SLN were found to be stable at 4°C for 6 months of study period. Hence, the SLN can be used as a potential carrier for successful delivery of poorly water-soluble drugs associated with poor oral bioavailability like sertraline.

Development and characterisation of chondroitin sulfate- and hyaluronic acid-incorporated sorbitan ester nanoparticles as gene delivery systems

Glycosaminoglycans (GAGs) are natural polymers that are broadly used in gene delivery systems to increase stability as well as decrease toxicity and nonspecific interactions, thereby increasing transfection efficiency. In this work, we propose sorbitan ester-based lipid nanoparticles (SENS) functionalised with the GAGs chondroitin sulfate (CS) and hyaluronic acid (HA) as gene delivery systems. For this purpose, we describe the design and evaluation of these nanosystems loaded with plasmid DNA, including an evaluation of their physicochemical characteristics, stability properties, ability to protect and efficiently transfect cells with Enhanced Green Fluorescent Protein plasmid (pEGFP) in vitro, and biocompatibility both in vitro and in vivo. We confirm that molecules with high biological value and targeting potential, such as HA and CS, can be successfully incorporated into our recently developed sorbitan ester-based nanoparticles (SENS) and that this incorporation leads to effective stabilisation of both nanosystems as well as protects plasmid DNA. We demonstrated that the aforementioned incorporation of HA and CS enables long-term stability of the nanosystems in both liquid and lyophilised states, which is a remarkable property that can aid in their transfer to industry. The ability of these functionalised nanosystems to transfect the A549 cell line without compromising cell viability was also shown, as well as their innocuous safety profile in vivo. Thus, we provide valuable evidence of the suitable properties and potential of these hybrid nanoparticles as gene delivery systems.

Achieving long-term stability of lipid nanoparticles: examining the effect of pH, temperature, and lyophilization

The broadest clinical application of siRNA therapeutics will be facilitated by drug-loaded delivery systems that maintain stability and potency for long times under ambient conditions. In the present study, we seek to better understand the stability and effect of storage conditions on lipidoid nanoparticles (LNPs), which have been previously shown by our group and others to potently deliver RNA to various cell and organ targets both in vitro and in vivo. Specifically, this study evaluates the influence of pH, temperature, and lyophilization on LNP efficacy in HeLa cells. When stored under aqueous conditions, we found that refrigeration (2°C) kept LNPs the most stable over 150 days compared to storage in the −20°C freezer or at room temperature. Because the pH of the storage buffer was not found to influence stability, it is suggested that the LNPs be stored under physiologically appropriate conditions (pH 7) for ease of use. Although aggregation and loss of efficacy were observed when LNPs were subjected to freeze–thaw cycles, their stability was retained with the use of the cryoprotectants, trehalose, and sucrose. Initially, lyophilization of the LNPs followed by reconstitution in aqueous buffer also led to reductions in efficacy, most likely due to aggregation upon reconstitution. Although the addition of ethanol to the reconstitution buffer restored efficacy, this approach is not ideal, as LNP solutions would require dialysis prior to use. Fortunately, we found that the addition of trehalose or sucrose to LNP solutions prior to lyophilization facilitated room temperature storage and reconstitution in aqueous buffer without diminishing delivery potency.

Stability study of sodium colistimethate-loaded lipid nanoparticles

In the last decades, the encapsulation of antibiotics into nanoparticulate carriers has gained increasing attention for the treatment of infectious diseases. Sodium colistimethate-loaded solid lipid nanoparticles (Colist-SLNs) and nanostructured lipid carriers (Colist-NLCs) were designed aiming to treat the pulmonary infection associated to cystic fibrosis patients. The nanoparticles were freeze-dried using trehalose as cryoprotectant. The stability of both nanoparticles was analysed over one year according to the International Conference of Harmonisation (ICH) guidelines by determining the minimum inhibitory concentration (MIC) against clinically isolated Pseudomonas aeruginosa strains and by studying their physico-chemical characteristics. The results showed that Colist-SLNs lost their antimicrobial activity at the third month; on the contrary, the antibacterial activity of Colist-NLCs was maintained throughout the study within an adequate range (MIC ≤16 μg/mL). In addition, Colist-NLCs exhibited suitable physico-chemical properties at 5 °C and 25 °C/60% relative humidity over one year. Altogether, Colist-NLCs proved to have better stability than Colist-SLNs.

Freeze-drying of ampicillin solid lipid nanoparticles using mannitol as cryoprotectant

abstract Solid lipid nanoparticles (SLNs) are interesting colloidal drug-delivery systems, since they have all the advantages of the lipid and polymeric nanoparticles. Freeze-drying is a widely used process for improving the stability of SLNs. Cryoprotectants have been used to decrease SLN aggregations during freeze-drying. In this study Ampicillin was chosen to be loaded in a cholesterol carrier with nano size range. To support the stability of SLNs, freeze-drying was done using mannitol. Particle size, drug release profile and antibacterial effects were studied after freeze-drying in comparison with primary SLNs. Preparations with 5% mannitol showed the least particle size enlargement. The average particle size was 150 and 187 nm before and after freeze-drying, respectively. Freeze-drying did not affect the release profile of drug loaded nanopartilces. Also our study showed that lyophilization did not change the antimicrobial effect of ampicillin SLNs. DSC analysis showed probability of chemical interaction between ampicillin and cholesterol.

Vaginal gene therapy

In the last years, vaginal gene therapy has gained increasing attention mainly for the treatment and control of sexually transmitted infections. DNA delivery has been also suggested to improve reproductive outcomes for women with deficiencies in the female reproductive tract. Although no product has reached clinical phase, preclinical investigations reveal the potential of the vaginal tract as an effective administration route for gene delivery. This review focuses on the main advantages and challenges of vaginal gene therapy, and on the most used nucleic acid delivery systems, including viral and non-viral vectors. Additionally, the advances in the application of vaginal gene therapy for the treatment and/or prevention of infectious diseases such as the human immunodeficiency virus (HIV), the human papillomavirus (HPV) or the herpes simplex virus (HSV) are presented.