Antifouling foldable acrylic IOLs loaded with norfloxacin by aqueous soaking and by supercritical carbon dioxide technology

Cascade reaction triggering and photothermal AuNPs@MIL MOFs doped intraocular lens for enhanced posterior capsular opacification prevention

Posterior capsular opacification (PCO) is the most common complication after cataract surgery. Present strategies can't meet the clinical needs of long-term prevention. This research reports a novel intraocular lens (IOL) bulk material with high biocompatibility and synergistic therapy. Gold nanoparticles (AuNPs) doped MIL-101-NH₂ metal-organic frameworks (MOFs) (AuNPs@MIL) was firstly fabricated via in situ reductions. Then the functionalized MOFs were uniformly mixed with glycidyl methacrylate (GMA) and 2-(2-ethoxyethoxy) ethyl acrylate (EA) to form the nanoparticle doped polymer (AuNPs@MIL-PGE), and which was used to fabricate IOL bulk materials. The materials' optical and mechanical properties with different mass contents of nanoparticles are investigated. Such bulk functionalized IOL material could efficiently remove residual human lens epithelial cells (HLECs) in the capsular bag in the short term, and can prevent PCO on demand in the long run by near-infrared illumination (NIR) action. In vivo and in vitro experiments demonstrate the biosafety of the material. The AuNPs@MIL-PGE exhibits excellent photothermal effects, which could inhibit cell proliferation under NIR and doesn't cause pathological effects on the surrounding tissues. Such functionalized IOL can not only avoid the side effects of the antiproliferative drugs but also realize the enhanced PCO prevention in clinical practice.

Surface modification of commercial intraocular lens by zwitterionic and antibiotic-loaded coating for preventing postoperative endophthalmitis

After cataract surgery, to prevent possible postoperative endophthalmitis (POE) caused by attached pathogenic bacteria onto the surface of implanted intraocular lens (IOL), various antibiotic-loaded IOLs have been proposed and widely studied to inhibit bacterial infection. However, most of these developed antibiotic-loaded IOLs still suffer from shortcomings such as insufficient drug loading, short release time, poor biocompatibility, and risk of secondary infection. Herein, we propose a zwitterionic and high-drug loading coating for surface modification of commercial hydrophobic IOL with both antifouling and antibacterial properties to effectively prevent POE. In this strategy, zwitterionic poly(carboxylbetaine-co-dopamine methacrylamide) copolymers (pCBDA) and dopamine (DA) were first robustly co-deposited onto IOL surface via facile mussel-inspired chemistry, resulting in a hydrophilic coating (defined as PCB) without sacrificing the high light transmittance of the native IOL. Subsequently, amikacin (AMK), an amine-rich antibiotic was reversibly conjugated onto the coating through the acid-sensitive Schiff base bonds formed by the reaction between amino and catechol groups, with high-drug payload over ∼35.5 μg per IOL and 30 days of sustained drug release under weak acid environment. Benefiting from the antifouling property of zwitterionic pCBDA copolymers, the intraocularly implanted PCB/AMK-coated IOL could effectively resist the adhesion and proliferation of residual LECs to inhibit the development of posterior capsule opacification (PCO) without affecting the normal ocular tissues, demonstrating excellent in vivo biocompatibility. Moreover, the synergy of zwitterionic pCBDA and conjugated AMK with acidic-dependent release behavior endowed this PCB/AMK-coated IOL strong antibacterial activity against both in vitro biofilm formation and in vivo postoperative Staphylococcus aureus infection, suggesting its promising application in preventing POE.

Unravelling the role of hemp straw derived cellulose in CMC/PVA hydrogel for sustained release of fluoroquinolone antibiotic

Cellulose fibres derived from hemp stalks, a prevalent biowaste in Northern India, were effectively converted into carboxymethyl cellulose (HS-CMC). Novel environmentally benign hydrogels were synthesized from HS-CMC and polyvinyl alcohol (PVA) using citric acid, a green crosslinker employing freeze-drying method. The HS-CMC/PVA hydrogels were successfully used for sustained release of fluoroquinolone antibiotic, norfloxacin. The hydrogels were characterized using FTIR, XRD, FE-SEM, EDS and thermal stability and evaluated for their carbonyl content, swelling ratio, in-vitro drug release behaviour and bactericidal properties. Successful isolation of cellulose from hemp stalks and its conversion into hydrogel with the presence of ester and carbonyl linkages was confirmed by FTIR. Thermal stability was impaired when cellulose fibres were converted into HS-CMC via carboxymethylation, as the crystalline structure was utterly disrupted. For the hydrogel, the equilibrium swelling ratios at pH -1.2 and 7.4 were assessed as 378.4 % and 538.7 %, respectively, higher than reported CMC hydrogels. The norfloxacin (NFX) encapsulated hydrogels exhibited good bactericidal properties with zone of inhibition of 19.2 ± 0.3 mm against E. coli and 16.4 ± 0.4 mm against S. aureus. The in-vitro release of NFX at pH 1.2 was 91 %, higher than pH 7.4 at 82 % with strong adherence to Higuchi kinetics model signifying that the release of NFX is via dissolution and diffusion. The release kinetics at different pH revealed Fickian behaviour establishing the potential of HS-CMC hydrogel for sustained release of norfloxacin.

An evaluation of the inhibition effects of cell migration of Aspirin soaking 360°square-edge intraocular lens in an in vitro lens capsule model

PURPOSE

This study performs to evaluate the Hydrophobic and Hydrosmart 360°square-edge intraocular lens drug delivery of Aspirin using an in vitro lens capsular model.

METHODS

Cell counting kit-8 assay was used to calculate 50% inhibiting concentration values in both SRA01/04 and HLE-B3 cells. Hoechst staining and transwell assay were used to detect cell proliferation and cell migration. The in vitro lens capsule model was established mainly with a special transwell-col and cell climbing sheet, in which an intraocular lens and the TGF-β2 were added. The ultraviolet spectrophotometer was used to measure the drug concentrations released in vitro. Cell-exclusion zone assay was used to detect the cell migration in the in vitro capsular model.

RESULTS

It shows that cell morphology and distribution of SRA01/04 in the in vitro lens capsular model were closer to those in vivo. The results revealed that there could be significant inhibiting effects on cell migration of the hydrosmart intraocular lens with a sustained drug release in vitro in 7 days, while the hydrophobic intraocular lens drug delivery of Aspirin was mainly performed only from day 1 to day 3.

CONCLUSIONS

Results showed the developed hydrosmart intraocular lens could release Aspirin continuously in vitro to inhibit the cell migration of lens epithelial cells.

Drug-Loaded Hydrogels for Intraocular Lenses with Prophylactic Action against Pseudophakic Cystoid Macular Edema

Pseudophakic cystoid macular edema (PCME), caused by chronic inflammation, is the most common cause of visual impairment in the medium-term after cataract surgery. Therefore, the prophylactic topical administration of combined steroidal and non-steroidal anti-inflammatory drugs is commonly done. Drug-eluting intraocular lenses (IOLs) gained interest as an efficient way to overcome the compliance issues related to the use of ocular drops without the need for additional surgical steps. The incorporation of functional monomers and molecular imprinting were herein applied to design hydrogels suitable as IOLs and able to co-deliver steroidal (dexamethasone sodium phosphate) and non-steroidal (bromfenac sodium) drugs. The incorporation of N-(2-aminopropyl) methacrylamide (APMA) increased the drug uptake and improved the in vitro release kinetics. Imprinting with bromfenac resulted in a decreased drug release due to permanent drug bonding, while imprinting with dexamethasone increased the amount of dexamethasone released after dual-drug loading. The application of a mathematical model to predict the in vivo drug release behavior suggests the feasibility of achieving therapeutic drug concentrations of bromfenac and dexamethasone in the aqueous humor for about 2 and 8 weeks, respectively, which is compatible with the current topical prophylaxis after cataract surgery.

Aspirin-Loaded Polymeric Films for Drug Delivery Systems: Comparison between Soaking and Supercritical CO2 Impregnation

Polymeric implants loaded with drugs can overcome the disadvantages of oral or injection drug administration and deliver the drug locally. Several methods can load drugs into polymers. Herein, soaking and supercritical CO2 (scCO2) impregnation methods were employed to load aspirin into poly(l-lactic acid) (PLLA) and linear low-density polyethylene (LLDPE). Higher drug loadings (DL) were achieved with scCO2 impregnation compared to soaking and in a shorter time (3.4 ± 0.8 vs. 1.3 ± 0.4% for PLLA; and 0.4 ± 0.5 vs. 0.6 ± 0.5% for LLDPE), due to the higher swelling capacity of CO2. The higher affinity of aspirin explained the higher DL in PLLA than in LLDPE. Residual solvent was detected in LLDPE prepared by soaking, but within the FDA concentration limits. The solvents used in both methods acted as plasticizers and increased PLLA crystallinity. PLLA impregnated with aspirin exhibited faster hydrolysis in vitro due to the catalytic effect of aspirin. Finally, PLLA impregnated by soaking showed a burst release because of aspirin crystals on the PLLA surface, and released 100% of aspirin within 60 days, whereas the PLLA prepared with scCO2 released 60% after 74 days by diffusion and PLLA erosion. Hence, the scCO2 impregnation method is adequate for higher aspirin loadings and prolonged drug release.

Intraocular lenses as drug delivery devices

Cataract surgery is one of the most common and safe surgical procedures nowadays. However, it is not free of risks as endophthalmitis, ocular inflammation and posterior capsule opacification (PCO) can appear as post-surgery complications. The usual eye drop therapy used as prophylaxis for the former two complications has limited bioavailability. In turn, the prevention of PCO involves an adequate surgical technique and a careful choice of intraocular lens (IOL) design and material. Also, different drugs have been tested to reduce incidence of PCO, but no prophylaxis demonstrated to be completely effective. In the past few years, IOLs have been proposed as drug delivery devices to replace or/assist the usual eye drop therapy in the post-operatory period. The great advantage of drug loaded IOLs would be to ensure a continuous drug delivery, independent of patient's compliance without requiring any further action besides IOL implantation. The biggest challenge of drug loaded IOLs production is to achieve a controlled and extended release that meet therapeutic needs without inducing toxicity to the surrounding ocular tissues or affecting the physical properties of the lens. This review starts by addressing the possible complications after cataract surgery, as well as the most commonly adopted prophylaxis for each of them. The various types of IOLs are described and their main advantages/disadvantages are discussed. The different strategies pursued to incorporate drugs into the IOLs and control their release, which include soaking the IOL in the drugs solution, supercritical impregnation, surface modifications, and attachment of drug reservoirs to the IOL, among others, are reported. For each strategy, a summary of the publications is presented, which includes the target complication, the types and amounts of released drugs and the IOL materials. A brief description of each individual study is given afterwards. Optimization of drug loaded IOLs through mathematical modelling and possible issues raised by their sterilization are also tackled. At the end, the future commercialization of drug loaded IOLs is commented.

Contact Lenses as Ophthalmic Drug Delivery Systems: A Review

Ophthalmic drugs used for the treatment of various ocular diseases are commonly administered by eye drops. However, due to anatomical and physiological factors, there is a low bioavailability of the active principle. In order to increase the drug residence time on the cornea to adequate levels, therapeutic contact lenses have recently been proposed. The polymeric support that constitutes the contact lens is loaded with the drug; in this way, there is a direct and effective pharmacological action on the target organ, promoting a prolonged release of the active principle. The incorporation of ophthalmic drugs into contact lenses can be performed by different techniques; nowadays, the soaking method is mainly employed. To improve the therapeutic performance of drug-loaded contact lenses, innovative methods have recently been proposed, including the impregnation with supercritical carbon dioxide. This updated review of therapeutic contact lenses production and application provides useful information on the most effective preparation methodologies, recent achievements and future perspectives.

The effects of addition of functional monomers and molecular imprinting on dual drug release from intraocular lens material

Although cataract surgery is considered a safe procedure, post-surgery complications such as endophthalmitis and ocular inflammation, may occur. To prevent this, antibiotics and anti-inflammatories are prescribed in the form of eye drops during the post-operatory period, but they lead to a low drug bioavailability in target tissues. The objective of this work is to develop an intraocular lens (IOL) material to deliver simultaneously one antibiotic, moxifloxacin (MXF), and one anti-inflammatory, diclofenac (DFN), in therapeutic concentrations to prevent both complications. The IOL material was modified through the incorporation of functional monomers, as well as molecular imprinting with both drugs using the same functional monomers, namely acrylic acid (AA), methacrylic acid (MAA), 4-vinylpiridine (4-VP) and a combination of MAA + 4-VP. The best results were obtained with MAA. Molecular imprinting did not influence the drug release, except with AA. Application of a mathematical model predicted that the released MXF and DFN concentrations would stay above the pre-determined MIC of S. aureus and S. epidermidis and the minimum values of IC50 of COX-1 and COX-2, for 9 and 14 days, respectively. Antibacterial tests showed that the released antibiotic remained active. The physical properties of the drug-loaded MAA-hydrogel remained adequate. The developed system proved to be non-irritant and non-cytotoxic.

Therapeutic Ophthalmic Lenses: A Review

An increasing incidence of eye diseases has been registered in the last decades in developed countries due to the ageing of population, changes in lifestyle, environmental factors, and the presence of concomitant medical conditions. The increase of public awareness on ocular conditions leads to an early diagnosis and treatment, as well as an increased demand for more effective and minimally invasive solutions for the treatment of both the anterior and posterior segments of the eye. Despite being the most common route of ophthalmic drug administration, eye drops are associated with compliance issues, drug wastage by lacrimation, and low bioavailability due to the ocular barriers. In order to overcome these problems, the design of drug-eluting ophthalmic lenses constitutes a non-invasive and patient-friendly approach for the sustained drug delivery to the eye. Several examples of therapeutic contact lenses and intraocular lenses have been developed, by means of different strategies of drug loading, leading to promising results. This review aims to report the recent advances in the development of therapeutic ophthalmic lenses for the treatment and/or prophylaxis of eye pathologies (i.e., glaucoma, cataract, corneal diseases, or posterior segment diseases) and it gives an overview of the future perspectives and challenges in the field.

A Critical Appraisal of New Developments in Intraocular Lens Modifications and Drug Delivery Systems for the Prevention of Cataract Surgery Complications

Cataract surgery is the commonest ophthalmic surgery worldwide. The replacement of the diseased lens with a synthetic one (intraocular lens-IOL) remains the treatment of choice, despite its potential complications that include infection, inflammation and posterior capsule opacification. The potential for drug delivery via the IOL has been researched extensively over a period of twenty-five years, yet there is very limited progress in transferring the findings from research to everyday practice. The objective of this review is to assess the progress made in the field of IOL lens modifications and drug delivery systems over the past five years. Thirty-six studies that were conducted during the past five years were identified and deemed suitable for inclusion. They were grouped in three broad categories, studies that described new methods for loading a drug onto the IOL, assessment of the effects of drugs that were loaded to the IOL and studies that assessed the effects of non-pharmaceutical modifications of IOLs. While considerable progress is continually being made with regard to methods and materials, there is still little capitalization upon these research studies, with no commercially available IOL-based drug delivery system being available. Close cooperation between researchers in basic sciences (chemistry, physics, materials science and pharmacy), clinical researchers, IOL manufacturers and the pharmaceutical industry is an important prerequisite for further development.

Drug-loaded and Blue-ray Filtered Hydrogel as a Potential Intraocular Lens for Cataract Treatment

Background:

Indomethacin (IND) is a class of non-steroidal, anti-inflammatory drugs, which is used to treat various kinds of ocular inflammation, and has been reported to prevent posterior capsule opacification (PCO) by inhibiting the mitosis and collagen synthesis of human lens epithelial cells (LECs). In addition, the specific absorption spectrum of indomethacin shows the effect of absorbing short-wavelength blue-violet light.

Objective:

We prepared an indomethacin-loaded hydrogel as a potential intraocular lens (IOLs) material to prevent endophthalmitis, PCO and filter harmful blue light.

Methods:

Indomethacin prodrugs (HEMA-IND) (HI) were prepared by esterification of indomethacin and 2-hydroxyethyl methacrylate (HEMA), and poly (HEMA-co-MAA-co-MMA-co- HI) (HAMI) hydrogels were prepared by free-radical polymerization of 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), methacrylic acid (MAA) and HI. The physical and chemical properties of obtained hydrogel were detected, including optical, morphology, thermomechanical and surface properties, equilibrium water content, drug release behaviors and cytotoxicity.

Results:

HAMI hydrogels can filter harmful short-wavelength blue light and show other necessary properties like visible light transparency, glass transition temperatures, mechanical strength, and biocompatibility for making intraocular lenses. Meanwhile, MAA increases the hydrophilicity of the hydrogels, resulting in a lower water contact angle and controllable drug release from the hydrogels.

Conclusion:

In summary, HAMI hydrogels show a great potential as IOL biomaterials that can maintain the sustained release of indomethacin and filter harmful blue light after cataract surgery.

Lay Summary:

People with cataract surgery can be at high risk of postoperative complications, such as PCO and postoperative endophthalmitis. Moreover, early IOLs allowed all ultraviolet (UV) and visible light to pass through retina without restriction, thus to damage the retina and the retinal pigment epithelium, which may lead to retinopathy and age-related macular degeneration (AMD). Herein, we sought to design and prepare a kind of IOLs loaded with indomethacin to mitigate those postoperative complications and filter harmful blue light to improve the treatment prognosis.

Implantable Medical Devices and Tissue Engineering: An Overview of Manufacturing Processes and the Use of Polymeric Matrices for Manufacturing and Coating their Surfaces

Medical devices are important diagnosis and therapy tools for several diseases which include a wide range of products. Technological advances in this area have been proposed to reduce adverse complication incidences. New technologies and manufacturing processes, as well as the development of new materials or medical devices with modified surface and the use of biodegradable polymeric devices such as a substrate for cell culture in the field of tissue engineering, have attracted considerable attention in recent years by the scientific community intended to produce medical devices with superior properties and morphology. This review article focused on implantable devices, addresses the major advances in the biomedical field related to the devices manufacture processes such as 3D printing and hot melting extrusion, and the use of polymer matrices composed of copolymers, blends, nanocomposites or grafted with antiproliferative drugs for manufacturing and/or coating the devices surface.

Supercritical fluid technology for the development of innovative ophthalmic medical devices: Drug loaded intraocular lenses to mitigate posterior capsule opacification

Supercritical impregnation technology was applied to load acrylic intraocular lenses (IOLs) with methotrexate to produce a sustained drug delivery device to mitigate posterior capsule opacification. Drug release kinetics were studied in vitro and used to determine the drug loading. Loaded IOLs and control IOLs treated under the same operating conditions, but without drug, were implanted ex vivo in human donor capsular bags. The typical cell growth was observed and immunofluorescence staining of three common fibrosis markers, fibronectin, F-actin and α-smooth muscle actin was carried out. Transparent IOLs presenting a sustained release of methotrexate for more than 80 days were produced. Drug loading varying between 0.43 and 0.75 ± 0.03 µg_drug·mg^-1_IOL were obtained when varying the supercritical impregnation pressure (8 and 25 MPa) and duration (30 and 240 min) at 308 K. The use of ethanol (5 mol%) as a co-solvent did not influence the impregnation efficiency and was even unfavorable at certain conditions. Even if the implantation of methotrexate loaded IOLs did not lead to a statistically significant variation in the duration required for a full cell coverage of the posterior capsule in the human capsular bag model, it was shown to reduce fibrosis by inhibiting epithelial-mesenchymal transformation. The innovative application presented has the potential to gain clinical relevance.

Sulindac encapsulation and release from functional poly(HEMA) microparticles prepared in supercritical carbon dioxide

Sulindac loaded poly(HEMA) cross-linked microparticles were synthesized via one-pot free-radical dispersion polymerisation in supercritical carbon dioxide (scCO₂) in presence of photocleavable diblock stabilisers based on polyethylene oxide (PEO) and poly(heptadecafluorodecyl acrylate) (PFDA) bearing a o-nitrobenzyl photosensitive junction (hv) (PEO-hv-PFDA), and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Poly(HEMA) cross-linked microparticles either empty or sulindac loaded were obtained with well-defined spherical morphology with the sizes between 250 and 350 nm. Additionally, upon UV-photolysis the stabiliser on the surface was cleaved which permits to microparticles to be redispersed in water leading to water swollen microgels about 2.1-3.6 µm. Moreover, the release behaviour from obtained microgels indicated the sustained release of sulindac over 10 days. Besides, the surface modification after UV-photolysis was studied and proved that the particles can be functionalised with further chemistries.

Supercritical Fluid Technology: An Emphasis on Drug Delivery and Related Biomedical Applications

During the past few decades, supercritical fluid (SCF) has emerged as an effective alternative for many traditional pharmaceutical manufacturing processes. Operating active pharmaceutical ingredients (APIs) alone or in combination with various biodegradable polymeric carriers in high-pressure conditions provides enhanced features with respect to their physical properties such as bioavailability enhancement, is of relevance to the application of SCF in the pharmaceutical industry. Herein, recent advances in drug delivery systems manufactured using the SCF technology are reviewed. We provide a brief description of the history, principle, and various preparation methods involved in the SCF technology. Next, we aim to give a brief overview, which provides an emphasis and discussion of recent reports using supercritical carbon dioxide (SC-CO2 ) for fabrication of polymeric carriers, for applications in areas related to drug delivery, tissue engineering, bio-imaging, and other biomedical applications. We finally summarize with perspectives.

In situ investigation of supercritical CO2 assisted impregnation of drugs into a polymer by high pressure FTIR micro-spectroscopy

High pressure FTIR micro-spectroscopy to follow the kinetics of the drug loading during the supercritical CO₂ assisted impregnation process.

Determination of Norfloxacin and Ciprofloxacin in Chicken Meat Based on Matrix Solid-Phase Dispersion Extraction and Capillary Zone Electrophoresis

This study describes an effective matrix solid-phase dispersion (MSPD) extraction method for determining norfloxacin (NOR) and ciprofloxacin (CIP) in chicken meat by capillary zone electrophoresis (CZE). The optimum conditions for separating NOR and CIP were as follows:60 cm×75 μm i.d. capillary, 40 mmol L−1borate buffer solution (pH 8.5), separation voltage at 16 kV, and detection wavelength at 280 nm. Before CZE determination, the chicken meat samples were purified and enriched by using an MSPD extraction step with a preconditioned C18cartridge and by eluting the compound with 3.0 mL of acetonitrile. A good linear fit curve with the concentration range of 0.10 μg g−1to 500 μg g−1for NOR and CIP was obtained, with regression coefficients of 0.9994 and 0.9986, respectively. The limits of detection of NOR and CIP were 0.04 and 0.03 μg g−1, respectively. The proposed method was successfully applied to determine NOR and CIP in chicken meat.