Hyaluronic acid and its derivatives in drug delivery and imaging: Recent advances and challenges

Carbohydrate polymer-based nanoparticles in curcumin delivery for cancer therapy: A review

The use of natural products for cancer treatment has a lengthy history. The safety and multifunctionality of naturally occurring substances have rendered them appropriate for cancer treatment. Curcumin influences multiple molecular pathways and is advantageous for treating both hematological and solid tumors. Nonetheless, the effectiveness of curcumin in vivo and in clinical studies has faced scrutiny due to its inadequate pharmacokinetic profile. Consequently, nanoparticles have been created for the administration of curcumin in cancer treatment. The nanoparticles can enhance the distribution of curcumin in tissues and increase its therapeutic effectiveness. Furthermore, nanoparticles expand the uptake of curcumin in cancer cells, leading to heightened cytotoxicity. Carbohydrate nanoparticles provide a promising solution for delivering curcumin in cancer treatment by tackling its low solubility, limited bioavailability, and quick degradation. These biodegradable and biocompatible carriers, originating from polymers such as chitosan, hyaluronic acid, and alginate, safeguard curcumin, improving its stability and allowing for controlled release. Targeting ligands for functionalization guarantee selective distribution to tumor cells, enhancing therapeutic effectiveness and reducing off-target impacts. Their capacity to encapsulate curcumin with other agents allows for synergistic therapies, enhancing anticancer results even more. The adjustable characteristics of carbohydrate nanoparticles, along with their minimal toxicity, create a revolutionary platform.

Polysaccharide-based implant drug delivery systems for precise therapy: Recent developments, and future trends

Implantable drug delivery systems offer numerous benefits, including effective drug administration at lower concentrations, fewer side effects, and improved patient compliance. Various polymers are used for fabricating implants, with biopolymers, particularly polysaccharides, being notable for their ability to modulate drug delivery characteristics. The review aims to describe the strategies employed in the development of polysaccharide-based implants and provide a comprehensive understanding of various polysaccharides such as starch, cellulose, alginate, chitosan, pullulan, carrageenan, dextran, hyaluronic acid, agar, pectin, and gellan gum in the fabrication of implant for targeted therapy. The review explores the biomedical applications of polysaccharide-based implantable devices, highlighting recent advancements in the development of these systems. Detailed discussions cover implants used in the oral cavity, nasal cavity, bone, ocular applications, and antiviral therapy. Additionally, regulatory considerations concerning implantable drug delivery are emphasized. The findings of the study show that polysaccharides can be used for the development of implants for drug delivery applications.

Crosslinking by Click Chemistry of Hyaluronan Graft Copolymers Involving Resorcinol-Based Cinnamate Derivatives Leading to Gel-like Materials

The well-known "click chemistry" reaction copper(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) was used to transform under very mild conditions hyaluronan-based graft copolymers HA(270)-FA-Pg into the crosslinked derivatives HA(270)-FA-TEGERA-CL and HA(270)-FA-HEGERA-CL. In particular, medium molecular weight (i.e., 270 kDa) hyaluronic acid (HA) grafted at various extents (i.e., 10, 20, and 40%) with fluorogenic ferulic acid (FA) residue bonding propargyl groups were used in the CuAAC reaction with novel azido-terminated crosslinking agents Tri(Ethylene Glycol) Ethyl Resorcinol Acrylate (TEGERA) and Hexa(Ethylene Glycol) Ethyl Resorcinol Acrylate (HEGERA). The resulting HA(270)-FA-TEGERA-CL and HA(270)-FA-HEGERA-CL materials were characterized from the point of view of their structure by performing NMR studies. Moreover, the swelling behavior and rheological features were assessed employing TGA and DSC analysis to evaluate the potential gel-like properties of the resulting crosslinked materials. Despite the 3D crosslinked structure, HA(270)-FA-TEGERA-CL and HA(270)-FA-HEGERA-CL frameworks showed adequate swelling performance, the required shear thinning behavior, and coefficient of friction values close to those of the main commercial HA solutions used as viscosupplements (i.e., 0.20 at 10 mm/s). Furthermore, the presence of a crosslinked structure guaranteed a longer residence time. Indeed, HA(270)-FA-TEGERA-CL-40 and HA(270)-FA-HEGERA-CL-40 after 48 h showed a four times greater enzymatic resistance than the commercial viscosupplements. Based on the promising obtained results, the crosslinked materials are proposed for their potential applicability as novel viscosupplements.

Intratracheal Administration of Itraconazole-Loaded Hyaluronated Glycerosomes as a Promising Nanoplatform for the Treatment of Lung Cancer: Formulation, Physiochemical, and In Vivo Distribution

BACKGROUND

Itraconazole (ITZ) is an antiangiogenic agent recognized as a potent suppressor of endothelial cell growth that suppresses angiogenesis. Nevertheless, its exploitation is significantly restricted by its low bioavailability and systematic side effects. The objective of this study was to utilize glycerosomes (GLY), glycerol-developed vesicles, as innovative nanovesicles for successful ITZ pulmonary drug delivery.

METHODS

The glycerosomes were functionalized with hyaluronic acid (HA-GLY) to potentiate the anticancer efficacy of ITZ and extend its local bio-fate. ITZ-HA-GLY were fabricated using soybean phosphatidylcholine, tween 80, HA, and sonication time via a thin-film hydration approach according to a 24 full factorial design. The impact of formulation parameters on ITZ-HA-GLY physicochemical properties, as well as the optimal formulation option, was evaluated using Design-Expert®. Sulphorhodamine-B (SRB) colorimetric cytotoxicity assay of the optimized ITZ-HA-GLY versus ITZ suspension was explored in the human A549 cell line. The in vivo pharmacokinetics and bio-distribution examined subsequent to intratracheal administrations of ITZ suspension, and ITZ-HA-GLY were scrutinized in rats.

RESULTS

The optimized ITZ-HA-GLY unveiled vesicles of size 210.23 ± 6.43 nm, zeta potential of 41.06 ± 2.62 mV, and entrapment efficiency of 73.65 ± 1.76%. Additionally, ITZ-HA-GLY manifested a far lower IC50 of 13.03 ± 0.2 µg/mL on the A549 cell line than that of ITZ suspension (28.14 ± 1.6 µg/mL). Additionally, the biodistribution analysis revealed a higher concentration of ITZ-HA-GLY within the lung tissues by 3.64-fold as compared to ITZ suspension. Furthermore, the mean resistance time of ITZ-HA-GLY declined more slowly with 14 h as compared to ITZ suspension, confirming the accumulation of ITZ inside the lungs and their promising usage as a target for the treatment of lung disease.

CONCLUSIONS

These data indicate that the improved ITZ-HA-GLY demonstrates significant promise and represents an exciting prospect in intratracheal delivery systems for lung cancer treatment, meriting further investigation.

Follicular mediated etodolac phosalosomal gel for contact dermatitis alleviation, insights from optimization to in-vivo appraisal

Despite its long history as a preferential cyclooxygenase-2 inhibitor, the topical application of etodolac in inflammatory disorders does not achieve the desired clinical efficiency because of its poor water solubility and poor skin permeation. In the ongoing study, phosalosomes were designed to mitigate the etodolac drawbacks and to enhance its skin localization. Hyaluronic acid was utilized to prepare a dermal gel for the alleviation of skin inflammation. Etodolac loaded hyaluronic acid phosalosomal gel had a sustainable release profile and 10.59-fold enhanced skin retention compared to free etodolac, with boosted skin tolerability on histopathological examination after acute and chronic applications. Confocal laser microscopy imaging indicated that the etodolac amounts accumulated in the liver and kidney following dermal application were 29 and 5.7-fold lower than those following the systemic dose, respectively. For in vivo studies, etodolac loaded hyaluronic acid phosalosomal gel presented superior anti-oedemic and significant anti-nociception potential. The promising homogenous localization highlighted its potential for the delivery of lipophilic drugs for the targeted treatment of other localized skin disorders.

Hyaluronic acid as a tumor progression agent and a potential chemotherapeutic biomolecule against cancer: A review on its dual role

Hyaluronic acid is a major constituent of the extracellular matrix of vertebrate tissue that provides mechanical support to cells and acts as a mediator in regulation of necessary biochemical process essential for maintenance of tissue homeostasis. The variation in quantity of hyaluronic acid content in tissues is often associated with different pathological conditions. It is associated with tumor aggression and progression as it plays crucial role in regulating different aspects of tumorigenesis and several defined hallmarks of cancer. It assists in tumor progression by undergoing extracellular remodeling to establish tumor microenvironment which restricts the delivery of cytotoxic drugs to neoplastic cells due to increase in interstitial pressure. Hyaluronic acid catabolic and anabolic genes and low-molecular weight hyaluronic acid play significant role in the establishing tumor microenvironment by assisting in cell proliferation, metastasis and invasion. On the other hand, it is also used as an effective drug-delivery platform in cancer therapies as its biocompatibility and biodegradability lower the toxicity of chemotherapeutic drugs and increase drug retention. High-molecular weight hyaluronic acid-bioconjugates specifically bind with hyaladherins, facilitating targeted drug delivery and also exert anti-inflammatory properties. This review also highlights the market and patent trends in the development of effective chemotherapeutic hyaluronic acid formulations and the current scenario regarding clinical trials.

Nanoparticle-Based Drug Delivery Systems for Inflammatory Bowel Disease Treatment

Inflammatory bowel disease (IBD) is a chronic, non-specific inflammatory condition characterized by recurring inflammation of the intestinal mucosa. However, the existing IBD treatments are ineffective and have serious side effects. The etiology of IBD is multifactorial and encompasses immune, genetic, environmental, dietary, and microbial factors. The nanoparticles (NPs) developed based on specific targeting methodologies exhibit great potential as nanotechnology advances. Nanoparticles are defined as particles between 1 and 100 nm in size. Depending on their size and surface functionality, NPs exhibit different properties. A variety of nanoparticle types have been employed as drug carriers for the treatment of inflammatory bowel disease (IBD), with encouraging outcomes observed in experimental models. They increase the bioavailability of drugs and enable targeted drug delivery, promoting localized treatment and thus enhancing efficacy. Nevertheless, numerous challenges persist in the translation from nanomedicine to clinical application, including enhanced formulations and preparation techniques, enhanced drug safety profiles, and so forth. In the future, it will be necessary for scientists and clinicians to collaborate in order to study disease mechanisms, develop new drug delivery strategies, and screen new nanomedicines. Nevertheless, numerous challenges persist in the translation from nanomedicine to clinical application, including enhanced formulations and preparation techniques, enhanced drug safety profiles, and so forth. In the future, it will be necessary for scientists and clinicians to collaborate in order to study disease mechanisms, develop new drug delivery strategies, and screen new nanomedicines.

Efficacy and Safety of Neauvia Intense in Correcting Moderate-to-Severe Nasolabial Folds: A Post-Market, Prospective, Open-Label, Single-Centre Study

Purpose

 This prospective, single-center study aims to evaluate the safety and effectiveness of NEAUVIA Intense, a PEG cross-linked polymeric hydrogel, in correcting moderate-to-severe nasolabial folds (NLF) in a routine clinical setting. The study investigates the aesthetic outcomes, patient satisfaction, and adverse events associated with the injectable filler.

Patients and Methods

Seventy patients were initially enrolled, with 60 meeting study parameters. The post-market study involved a single session treatment, employing NEAUVIA Intense on each side of the NLF. Assessments utilized the Modified Fitzpatrick Wrinkle Scale (MFWS), Global Aesthetic Improvement Scale (GAIS), and Visual Analogical Scale (VAS).

Results

 The study demonstrated a statistically significant improvement in tissue depression immediately post-injection (p < 0.001), with sustained effects up to 6 months. MFWS assessments revealed that responder patients were 96.6% immediately after treatment, 76.6% one month, 48.3% after 3 months, and 28.3% at 6 months (p < 0.001). Additionally, there was a significant change in the frequency distribution of MFWS scores post-treatment (p < 0.001), with the majority of patients experiencing improvement in tissue depression. Maximum improvement was observed at 30- and 90-days post-treatment based on GAIS assessments. Patient and physician satisfaction, measured by VAS, remained stable over time, with fluctuations at 4 and 24 weeks after treatment (p < 0.001, Anova; p < 0.05, Wilcoxon). Throughout the entire follow-up duration of the patients enrolled in the study, no adverse effects related to the use of the product were observed.

Conclusion

 NEAUVIA Intense proved to be an effective solution for correcting NLF, providing significant and lasting improvements in tissue depression and aesthetic outcomes. The study underscores the necessity for continuous assessment in aesthetic medicine to align outcomes with evolving patient expectations and optimize long-term results. The findings contribute to the understanding of this specific hydrogel filler and highlight the broader context of injectable fillers in comprehensive facial aesthetic strategies.

Fabrication of poly(β-amino ester) and hyaluronic acid based pH responsive nanocomplex as an antibiotic release system

World Health Organization (WHO) warns about antimicrobial resistance (AMR) considered as the most serious threats to global health, food security, and development. There are various efforts for elimination of this serious issue. These efforts include education of individuals, new policies, development of new antimicrobials and new materials for effective delivery. Novel drug delivery systems with ability of local and on-demand delivery are one of the promising approaches for prevention of AMR. In this regard, a pH-responsive antibiotic delivery system based on pH-responsive poly(β-amino ester) (PBAE) and enzyme responsive hyaluronic acid (HA). The polymeric nanocomplexes were obtained via electrostatic complexation of PBAE and HA in the presence of a model antibiotics, colistin and vancomycin. The particle sizes at pH 7.4 were determined in the range of 131-730 nm and 120-400 nm by DLS and STEM, respectively. When pH was switched from 7.4 to 5.5, the hydrodynamic diameter increased 2.5-32 fold. The drug release performances were tested using FITC-labeled antibiotics via fluorescence spectroscopy. The nanocomplexes released the drugs more at pH 5.5 compared to pH 7.4. Antibacterial activity of the system was evaluated on various bacteria. The nanocomplex loaded with the antibiotics exhibited significantly greater efficacy against E. coli and S. aureus.

Cross-Linked Hyaluronan Derivatives in the Delivery of Phycocyanin

An easy and viable crosslinking technology, based on the "click-chemistry" reaction copper(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (click-crosslinking), was applied to graft copolymers of medium molecular weight (i.e., 270 kDa) hyaluronic acid (HA) grafted with ferulic acid (FA) residues bearing clickable propargyl groups, as well as caffeic acid derivatives bearing azido-terminated oligo(ethylene glycol) side chains. The obtained crosslinked materials were characterized from the point of view of their structure and aggregation liability to form hydrogels in a water environment. The most promising materials showed interesting loading capability regarding the antioxidant agent phycocyanin (PC). Two novel materials complexes (namely HA(270)-FA-TEGEC-CL-20/PC and HA(270)-FA-HEGEC-CL-20/PC) were obtained with a drug-to-material ratio of 1:2 (w/w). Zeta potential measurements of the new complexes (-1.23 mV for HA(270)-FA-TEGEC-CL-20/PC and -1.73 mV for HA(270)-FA-HEGEC-CL-20/PC) showed alterations compared to the zeta potential values of the materials on their own, suggesting the achievement of drug-material interactions. According to the in vitro dissolution studies carried out in different conditions, novel drug delivery systems (DDSs) were obtained with a variety of characteristics depending on the desired route of administration and, consequently, on the pH of the surrounding environment, thanks to the complexation of phycocyanin with these two new crosslinked materials. Both complexes showed excellent potential for providing a controlled/prolonged release of the active pharmaceutical ingredient (API). They also increased the amount of drug that reach the target location, enabling pH-dependent release. Importantly, as demonstrated by the DPPH free radical scavenging assay, the complexation process, involving freezing and freeze-drying, showed no adverse effects on the antioxidant activity of phycocyanin. This activity was preserved in the two novel materials and followed a concentration-dependent pattern similar to pure PC.

Recent advancements in the targeted delivery of etoposide nanomedicine for cancer therapy: A comprehensive review

Etoposide (ETO), a popular anticancer drug that inhibits topoisomerase II enzymes, may be administered more effectively and efficiently due to nanomedicine. The therapeutic application of ETO is constrained by its limited solubility, weak absorption, and severe side effects. This article summarizes substantial progress made in the development of ETO nanomedicine for the treatment of cancer. It discusses various organic and inorganic nanostructures used to load or affix ETOs, such as lipids, liposomes, polymeric nanoparticles (NPs), dendrimers, micelles, gold NPs, iron oxide NPs, and silica NPs. In addition, it evaluates the structural properties of these nanostructures, such as their size, zeta potential, encapsulation efficiency, and drug release mechanism, as well as their in vitro or in vivo performance. The article also emphasizes the co-delivery of ETO with other medications or agents to produce synergistic effects or combat drug resistance in the treatment of cancer. It concludes with a discussion of the challenges and potential avenues for clinical translation of ETO nanomedicine.

Polysaccharide-Based Nanogels to Overcome Mucus, Skin, Cornea, and Blood-Brain Barriers: A Review

Nanocarriers have been extensively developed in the biomedical field to enhance the treatment of various diseases. However, to effectively deliver therapeutic agents to desired target tissues and enhance their pharmacological activity, these nanocarriers must overcome biological barriers, such as mucus gel, skin, cornea, and blood-brain barriers. Polysaccharides possess qualities such as excellent biocompatibility, biodegradability, unique biological properties, and good accessibility, making them ideal materials for constructing drug delivery carriers. Nanogels, as a novel drug delivery platform, consist of three-dimensional polymer networks at the nanoscale, offering a promising strategy for encapsulating different pharmaceutical agents, prolonging retention time, and enhancing penetration. These attractive properties offer great potential for the utilization of polysaccharide-based nanogels as drug delivery systems to overcome biological barriers. Hence, this review discusses the properties of various barriers and the associated constraints, followed by summarizing the most recent development of polysaccharide-based nanogels in drug delivery to overcome biological barriers. It is expected to provide inspiration and motivation for better design and development of polysaccharide-based drug delivery systems to enhance bioavailability and efficacy while minimizing side effects.

Computational Study of Complex Formation between Hyaluronan Polymers and Polyarginine Peptides at Various Ratios

Hyaluronic acid, a naturally occurring carbohydrate biopolymer in human tissues, finds wide application in cosmetics, medicine, and material science. Its anionic properties play a crucial role in its interaction with positively charged macromolecules and ions. Among these macromolecules, positively charged arginine molecules or polyarginine peptides demonstrate potential in drug delivery when complexed with hyaluronan. This study aimed to compare and elucidate the results of both experimental and computational investigations on the interactions between hyaluronic acid polymers and polyarginine peptides. Experimental findings revealed that by varying the length of polyarginine peptides and the molar ratio, it is possible to modulate the size, solubility, and stability of hyaluronan-arginine particles. To further explore these interactions, molecular dynamics simulations were conducted to model the complexes formed between hyaluronic acid polymers and arginine peptides. The simulations are considered in different molar ratios and lengths of polyarginine peptides. By analysis of the data, we successfully determined the shape and size of the resulting complexes. Additionally, we identified the primary driving forces behind complex formation and explained the observed variations in peptide interactions with hyaluronan.

Nanoparticles in pancreatic cancer therapy: a detailed and elaborated review on patent literature

INTRODUCTION

Nanotechnology may open up new avenues for overcoming the challenges of pancreatic cancer therapy as a broad arsenal of anticancer medicines fail to realize their full therapeutic potential in pancreatic ductal adenocarcinoma due to the formation of multiple resistance mechanisms inside the tumor. Many studies have reported the successful use of various nano formulations in pancreatic cancer therapy.

AREAS COVERED

This review covers all the major nanotechnology-based patent litrature available on renowned patent data bases like Patentscope and Espacenet, through the time period of 2007-2022. This is an entirely patent centric review, and it includes both clinical and non-clinical data available on nanotechnology-based therapeutics and diagnostic tools for pancreatic cancer.

EXPERT OPINION

For the sake of understanding, the patents are categorized under various formulation-specific heads like metallic/non-metallic nanoparticles, polymeric nanoparticles, liposomes, carbon nanotubes, protein nanoparticles and liposomes. This distinguishes one specific nanoparticle type from another and makes this review a one-of-a-kind comprehensive patent compilation that has not been reported so far in the history of nanotechnological formulations in pancreatic cancer.

Development and Bioactivity of Zinc Sulfate Cross-Linked Polysaccharide Delivery System of Dexamethasone Phosphate

Improving the biopharmaceutical properties of glucocorticoids (increasing local bioavailability and reducing systemic toxicity) is an important challenge. The aim of this study was to develop a dexamethasone phosphate (DexP) delivery system based on hyaluronic acid (HA) and a water-soluble cationic chitosan derivative, diethylaminoethyl chitosan (DEAECS). The DexP delivery system was a polyelectrolyte complex (PEC) resulting from interpolymer interactions between the HA polyanion and the DEAECS polycation with simultaneous incorporation of zinc ions as a cross-linking agent into the complex. The developed PECs had a hydrodynamic diameter of 244 nm and a ζ-potential of +24.4 mV; the encapsulation efficiency and DexP content were 75.6% and 45.4 μg/mg, respectively. The designed DexP delivery systems were characterized by both excellent mucoadhesion and prolonged drug release (approximately 70% of DexP was released within 10 h). In vitro experiments showed that encapsulation of DexP in polysaccharide nanocarriers did not reduce its anti-inflammatory activity compared to free DexP.

Polysaccharide-Based Coatings as Drug Delivery Systems

Therapeutic polysaccharide-based coatings have recently emerged as versatile strategies to transform a conventional medical implant into a drug delivery system. However, the translation of these polysaccharide-based coatings into the clinic as drug delivery systems still requires a deeper understanding of their drug degradation/release profiles. This claim is supported by little or no data. In this review paper, a comprehensive description of the benefits and challenges generated by the polysaccharide-based coatings is provided. Moreover, the latest advances made towards the application of the most important representative coatings based on polysaccharide types for drug delivery are debated. Furthermore, suggestions/recommendations for future research to speed up the transition of polysaccharide-based drug delivery systems from the laboratory testing to clinical applications are given.

Polysaccharide-based nanoassemblies: From synthesis methodologies and industrial applications to future prospects

Polysaccharides, due to their remarkable features, have gained significant prominence in the sustainable production of nanoparticles (NPs). High market demand and minimal production cost, compared to the chemically synthesised NPs, demonstrate a drive towards polysaccharide-based nanoparticles (PSNPs) benign to environment. Various approaches are used for the synthesis of PSNPs including cross-linking, polyelectrolyte complexation, and self-assembly. PSNPs have the potential to replace a wide diversity of chemical-based agents within the food, health, medical and pharmacy sectors. Nevertheless, the considerable challenges associated with optimising the characteristics of PSNPs to meet specific targeting applications are of utmost importance. This review provides a detailed compilation of recent accomplishments in the synthesis of PSNPs, the fundamental principles and critical factors that govern their rational fabrication, as well as various characterisation techniques. Noteworthy, the multiple use of PSNPs in different disciplines such as biomedical, cosmetics agrochemicals, energy storage, water detoxification, and food-related realms, is accounted in detail. Insights into the toxicological impacts of the PSNPs and their possible risks to human health are addressed, and efforts made in terms of PSNPs development and optimising strategies that allow for enhanced delivery are highlighted. Finally, limitations, potential drawbacks, market diffusion, economic viability and future possibilities for PSNPs to achieve widespread commercial use are also discussed.

The immune-stealth polymeric coating on drug delivery nanocarriers: In vitro engineering and in vivo fate

Although essential nanosystems such as nanoparticles and nanocarriers are desirable options for transporting various drug molecules into the biological environment, they rapidly remove from the circulatory system due to their interaction with multiple in vivo barriers, especially the immune barrier, which will result in their short-term effects. In order to improve their effectiveness and durability in the circulatory system, the polymer coatings can use to cover the surface of nanoparticles and nanocarriers to conceal them from the immune system. Due to their different properties (like charge, elasticity, and hydrophilicity/hydrophobicity), these coatings can improve drug delivery nanosystem durability and therapeutic applications. The mentioned coatings have different types and are divided into various categories, such as synthetic polymers, polysaccharides, and zwitterionic polymers. Each of these polymers has unique properties based on its category, origin, and chemical structure that make them suitable for producing stealth drug delivery nanocarriers. In this review article, we have tried to explain the importance of these diverse polymer coatings in determining the fate of drug nanocarriers and then introduced the different types of these coatings and, finally, described various methods that directly and indirectly analyze the nanocoatings to determine the stability of nanoparticles in the body.

Efficacy of Pegylated Hyaluronic Acid Filler Enriched with Calcium Hydroxyapatite: A 24-Week Post-Market, Observational, Prospective, Open-Label, Single-Center Study

Recently, thanks to the greater discovery of the mechanisms of facial aging, an alternative to invasive plastic surgery has found space with less invasive aesthetic procedures, also based on an increasingly pressing request. We are specifically referring to dermal filler injection into or under the skin which leads to immediate rejuvenation and aesthetic improvements. In this study, we wanted to analyze the results obtained through the use of NEAUVIA Organic Stimulate, particularly with regard to its effectiveness, which is a cross-linked polymeric hydrogel, containing stabilized sodium hyaluronate 26 mg/mL and calcium hydroxyapatite (1%), glycine and L-proline in buffer pyrogen-free water, in its main indication, namely, the temporary correction of congenital and acquired deficiencies of the soft tissues of the face by intradermal injection. Initially, 70 patients were enrolled, but 10 did not complete the study due to non-observance of the investigation rules, so they were excluded from the protocol. The collected data demonstrate an efficient mechanical effect of the pegylated polymeric acid matrix enriched with low concertation of calcium hydroxyapatite and in accordance with other evidence in vitro and in vivo, and the mechanical support of the interstitial connective space improves the homestays of the anatomical layer rebalancing the physiological activity of the dermis cells.

Dual-targeting lanthanide-ICG-MOF nanoplatform for cancer Theranostics: NIR II luminescence imaging guided sentinel lymph nodes surgical navigation

Sentinel lymph node imaging is important for breast tumor staging and prediction of postoperative metastasis. However, clinical sentinel lymph node imaging has limitations such as low specificity, low contrast, and short retention time. The combination of bio-conjugates chemistry and luminescence technology may achieve the specific targeting effect. In this research, we designed a dual-targeting composite nanoprobe (∼50 nm) using a metal-organic framework (MOF) as carrier, loaded with lanthanide and ICG, and combined with hyaluronic acid and folic acid to detect metastatic lymph nodes. The coupled hyaluronic acid and folic acid can target to the tumor cells and dentritic cells with a dual-targeting effect. The FA-HA/ZIF-8@ICG nanoprobes can accumulate rapidly in sentinel lymph node with a stronger luminescence intensity (1.6 times) than that of normal popliteal lymph nodes in vivo, thus distinguish metastatic sentinel lymph node from normal effectively. Furthermore, due to the MOF carrier, the integrated lanthanide and near-infrared dye by transferring the absorbed excitation energy from ICG to Nd³⁺ can enhance the signal-to-background ratio of NIR II imaging and have long retention time in vivo imaging. Finally, the FA-HA/ICG@Ln@ZIF-8 nanoplatform increased the penetration depth and contrast of imaging, prolonged the retention time, and achieved the sentinel lymph nodes surgical resection. This study has important implications for lymph node imaging and surgical navigation.

Polymer-Based Nanostructures for Pancreatic Beta-Cell Imaging and Non-Invasive Treatment of Diabetes

Diabetes poses major economic, social, and public health challenges in all countries worldwide. Besides cardiovascular disease and microangiopathy, diabetes is a leading cause of foot ulcers and lower limb amputations. With the continued rise of diabetes prevalence, it is expected that the future burden of diabetes complications, early mortality, and disabilities will increase. The diabetes epidemic is partly caused by the current lack of clinical imaging diagnostic tools, the timely monitoring of insulin secretion and insulin-expressing cell mass (beta (β)-cells), and the lack of patients' adherence to treatment, because some drugs are not tolerated or invasively administrated. In addition to this, there is a lack of efficient topical treatment capable of stopping the progression of disabilities, in particular for treating foot ulcers. In this context, polymer-based nanostructures garnered significant interest due to their tunable physicochemical characteristics, rich diversity, and biocompatibility. This review article emphasizes the last advances and discusses the prospects in the use of polymeric materials as nanocarriers for β-cell imaging and non-invasive drug delivery of insulin and antidiabetic drugs in the management of blood glucose and foot ulcers.

Implantable and in-vivo shape-recoverable nanocellulose-hyaluronic acid composite hydrogel

Hydrogels have been used as a filling material in medical cosmetology, but current injection hydrogels have poor shaping ability due to its fluidity, while the hydrogels with fixed shape are easy to cause large wound size, resulting in rarely used in clinical practice. An implantable and in-vivo shape-recoverable hyaluronic acid (HA) based hydrogel is developed for tissue filling. In this work, complexes were made by hydrogen bonding between two natural polysaccharides: HA and TEMPO-oxidation cellulose nano-fiber. The elastic modulus of the HA/TOCN physical crosslinking hydrogel was maintained at 2500 G' in Pa, while, when ethylene glycol diglycidyl ether was introduced in the hydrogel, the elastic modulus could reach 60,000 G' in Pa. The volume of shrunk hydrogel reduced 80 ± 6 % of initial state, importantly, it can recover the shape in vivo inducing by extracellular moisture environment. Facts have proved that these shape recovery hydrogels were non-toxic to mammalian cells.

Impact of Natural-Based Viscosity Modifiers of Inhalation Drugs on the Dynamic Surface Properties of the Pulmonary Surfactant

The effectiveness of inhalation therapy depends on aerosol size distribution, which determines the penetration and regional deposition of drug in the lungs. As the size of droplets inhaled from medical nebulizers varies depending on the physicochemical properties of the nebulized liquid, it can be adjusted by adding some compounds as viscosity modifiers (VMs) of a liquid drug. Natural polysaccharides have been recently proposed for this purpose and while they are biocompatible and generally recognized as safe (GRAS), their direct influence of the pulmonary structures is unknown. This work studied the direct influence of three natural VMs (sodium hyaluronate, xanthan gum, and agar) on the surface activity of the pulmonary surfactant (PS) measured in vitro using the oscillating drop method. The results allowed for comparing the variations of the dynamic surface tension during breathing-like oscillations of the gas/liquid interface with the PS, and the viscoelastic response of this system, as reflected by the hysteresis of the surface tension. The analysis was done using quantitative parameters, i.e., stability index (SI), normalized hysteresis area (HAn), and loss angle (φ), depending on the oscillation frequency (f). It was also found that, typically, SI is in the range of 0.15-0.3 and increases nonlinearly with f, while φ slightly decreases. The effect of NaCl ions on the interfacial properties of PS was noted, which was usually positive for the size of hysteresis with an HAn value up to 2.5 mN/m. All VMs in general were shown to have only a minor effect on the dynamic interfacial properties of PS, suggesting the potential safety of the tested compounds as functional additives in medical nebulization. The results also demonstrated relationships between the parameters typically used in the analysis of PS dynamics (i.e., HAn and SI) and dilatational rheological properties of the interface, allowing for easier interpretation of such data.

Combinatorial synthesis of a hyaluronan based polysaccharide library for enhanced CD44 binding

Hyaluronan (HA) plays important roles in a wide range of biological events. The principal receptor of HA in the human body is the Cluster of Differentiation 44 (CD44). To enhance the binding between HA and CD44, a new approach was designed to take advantage of the four-component Ugi reaction. By modifying the carboxyl group on HA with various amine, aldehyde, and isocyanide moieties through the Ugi reaction, 36 HA like polysaccharides were generated. Two lead compounds were identified with enhanced CD44 binding compared to unmodified HA, which was confirmed by surface plasmon resonance (SPR), cellular studies and an in vivo mouse tumor model. Ski-learn as a machine learning tool was applied to analyze library data and yield predictions with an accuracy over 80 %. In conclusion, modification of HA via the Ugi reaction can be a promising strategy to develop novel binders toward HA receptors such as CD44.

Bioactive Glass-Ceramic Scaffolds Coated with Hyaluronic Acid-Fatty Acid Conjugates: A Feasibility Study

Promoting bone healing is a key challenge in our society that can be tackled by developing new implantable biomaterials provided with regenerative properties. In this work, the coating of three-dimensional porous glass-derived scaffolds with hyaluronic acid (HA)-fatty acids was investigated for the first time. The starting scaffolds, based on bioactive silicate glass, were produced by foam replication followed by sintering; then, HA-palmitate and HA-oleate conjugate coatings were deposited on the scaffold struts through a dipping procedure. FT-IR analysis confirmed the successful deposition of the coatings on the surface and struts of the scaffolds, the foam-like architecture of which was maintained as assessed by SEM investigations. The in vitro bioactivity of the HA-fatty-acid-coated scaffolds was studied by immersion tests in simulated body fluid and the subsequent evaluation of hydroxyapatite formation. The deposition of the polymeric coating did not inhibit the apatite-forming ability of scaffolds, as revealed by the formation of nanostructured hydroxyapatite agglomerates 48 h from immersion. These promising results motivate further investigation of these novel bioactive systems, which are expected to combine the bone-bonding properties of the glass with the wound-healing promotion carried out by the polymeric conjugates.

Novel Crosslinked HA Hydrogel Films for the Immediate Release of Active Ingredients

Novel crosslinked hyaluronic acid (HA) hydrogel films were previously invented by reacting the HA polymer with the PT (Pentaerythritol Tetra-acrylate) crosslinker over basic pH conditions in the oven. HA is considered a natural polymer present in cosmetic as well as pharmaceutical formulations. This current study aimed to highlight the effect of loading method (post-loading and in situ) of selected actives (salicylic acid and niacinamide B3) in the hydrogel films and then study their release kinetics. Differential scanning colometry (DSC) and Fourier transform infrared spectroscopy (FTIR) analysis evidenced the loading of the actives and full release from the HA hydrogel films, while the scanning electron microscopy (SEM) demonstrated the morphological changes to the films during the study by comparing the average molecular weight between crosslinks (M¯c), gel fraction, crosslinking density (Ve) and mesh size (ξ) of the films. The loading percentage of the SA and B3 showed high percentage loading of actives via both loading methods. In conclusion, the (95–100%) release of the actives achieved from the HA hydrogel films within 10 min revealed that the films are an efficient immediate release system of actives.

Bioadhesive Perivascular Microparticle-Gel Drug Delivery System for Intimal Hyperplasia Prevention: In Vitro Evaluation and Preliminary Biocompatibility Assessment

Intimal hyperplasia (IH) is an undesirable pathology occurring after peripheral or coronary bypass surgery. It involves the proliferation and migration of vascular smooth muscle cells, leading to a reduction in the diameter of the vascular lumen, which can lead to stenosis and graft failure. Topically applied atorvastatin (ATV) has been shown to slow down this process. To be effective, the drug delivery system should remain at the perivascular site for 5-8 weeks, corresponding to the progression of IH, and be capable of releasing an initial dose of the drug followed by a sustained release. Ideally, bioadhesion would anchor the gel to the application site. To meet these needs, we encapsulated ATV in a 2-component system: a hyaluronic acid-dopamine bioadhesive gel for rapid release and biodegradable microparticles for sustained release. The system was characterized by scanning electron microscopy, rheology, bioadhesion on porcine arteries, and a release profile. The rheological properties were adequate for perivascular application, and we demonstrated superior bioadhesion and cohesion compared to the control HA formulations. The release profile showed a burst, generated by free ATV, followed by sustained release over 8 weeks. A preliminary evaluation of subcutaneous biocompatibility in rats showed good tolerance of the gel. These results offer new perspectives on the perivascular application towards an effective solution for the prevention of IH.

Polysaccharide Based Implantable Drug Delivery: Development Strategies, Regulatory Requirements, and Future Perspectives

Implantable drug delivery systems advocate a wide array of potential benefits, including effective administration of drugs at lower concentrations and fewer side-effects whilst increasing patient compliance. Amongst several polymers used for fabricating implants, biopolymers such as polysaccharides are known for modulating drug delivery attributes as desired. The review describes the strategies employed for the development of polysaccharide-based implants. A comprehensive understanding of several polysaccharide polymers such as starch, cellulose, alginate, chitosan, pullulan, carrageenan, dextran, hyaluronic acid, agar, pectin, gellan gum is presented. Moreover, biomedical applications of these polysaccharide-based implantable devices along with the recent advancements carried out in the development of these systems have been mentioned. Implants for the oral cavity, nasal cavity, bone, ocular use, and antiviral therapy have been discussed in detail. The regulatory considerations with respect to implantable drug delivery has also been emphasized in the present work. This article aims to provide insights into the developmental strategies for polysaccharide-based implants.

Multimodal Magnetic Resonance and Photoacoustic Imaging of Tumor-Specific Enzyme-Responsive Hybrid Nanoparticles for Oxygen Modulation

Multimodal imaging contrast agents for cancer that can not only perform diagnostic functions but also serve as tumor microenvironment–responsive biomaterials are encouraging. In this study, we report the design and fabrication of a novel enzyme-responsive T₁ magnetic resonance imaging (MRI) contrast agent that can modulate oxygen in the tumor microenvironment via the catalytic conversion of H₂O₂ to O₂. The T₁ contrast agent is a core–shell nanoparticle that consists of manganese oxide and hyaluronic acid (HA)–conjugated mesoporous silica nanoparticle (HA-MnO@MSN). The salient features of the nanoparticle developed in this study are as follows: 1) HA serves as a targeting ligand for CD44-expressing cancer cells; 2) HA allows controlled access of water molecules to the MnO core via the digestion of enzyme hyaluronidase; 3) the generation of O₂ bubbles in the tumor by consuming H₂O₂; and 4) the capability to increase the oxygen tension in the tumor. The r₁ relaxivity of HA-MnO@MSN was measured to be 1.29 mM⁻¹s⁻¹ at a magnetic field strength of 9.4 T. In vitro results demonstrated the ability of continuous oxygen evolution by HA-MnO@MSN. After intratumoral administration of HA-MnO@MSN to an HCT116 xenograft mouse model, T₁ weighted MRI contrast was observed after 5 h postinjection and retained up to 48 h. In addition, in vivo photoacoustic imaging of HA-MnO@MSN demonstrated an increase in the tumor oxygen saturation over time after i. t. administration. Thus, the core–shell nanoparticles developed in this study could be helpful in tumor-targeted T₁ MR imaging and oxygen modulation.

Hyaluronic Acid-Based Nanomaterials as a New Approach to the Treatment and Prevention of Bacterial Infections

Bacterial contamination of medical devices is a great concern for public health and an increasing risk for hospital-acquired infections. The ongoing increase in antibiotic-resistant bacterial strains highlights the urgent need to find new effective alternatives to antibiotics. Hyaluronic acid (HA) is a valuable polymer in biomedical applications, partly due to its bactericidal effects on different platforms such as contact lenses, cleaning solutions, wound dressings, cosmetic formulations, etc. Because the pure form of HA is rapidly hydrolyzed, nanotechnology-based approaches have been investigated to improve its clinical utility. Moreover, a combination of HA with other bactericidal molecules could improve the antibacterial effects on drug-resistant bacterial strains, and improve the management of hard-to-heal wound infections. This review summarizes the structure, production, and properties of HA, and its various platforms as a carrier in drug delivery. Herein, we discuss recent works on numerous types of HA-based nanoparticles to overcome the limitations of traditional antibiotics in the treatment of bacterial infections. Advances in the fabrication of controlled release of antimicrobial agents from HA-based nanosystems can allow the complete eradication of pathogenic microorganisms.

Advances in modified hyaluronic acid-based hydrogels for skin wound healing

Hyaluronic acid (HA) is a natural linear anionic polysaccharide with many unique characteristics such as excellent biocompatibility and biodegradability, native biofunctionality, hydrophilicity, and non-immunoreactivity. HA plays crucial roles in numerous biological processes, including the inflammatory response, cell adhesion, migration, proliferation, differentiation, angiogenesis, and tissue regeneration. All these properties and biological functions of HA make it an appealing material for the synthesis of biomedical hydrogels for skin wound healing. Since HA is not able to be gelate alone, it must be processed and functionalized through chemical modifications and crosslinking to generate versatile HA-based hydrogels. In recent years, different physical and chemical crosslinking strategies for HA-based hydrogels have been developed and designed, such as radical polymerization, Schiff-base crosslinking, enzymatic crosslinking, and dynamic covalent crosslinking, and they have broad and promising applications in skin wound healing and tissue engineering. In this review, we focus on chemical modification and crosslinking strategies for HA-based hydrogels, aiming to provide an overview of the latest advances in the development of HA-based hydrogels for skin wound healing. We summarize and propose feasible measures for the application of HA-based hydrogels for skin treatment, and discuss future application trends, which may ultimately promote HA-based hydrogels as a promising biomaterial for clinical applications.

Hyaluronic acid hydrogels crosslinked via blue light-induced thiol-ene reaction for the treatment of rat corneal alkali burn

To assess corneal inflammation from alkali chemical burns, we examined the therapeutic effects of in situ-forming hyaluronic acid (HA) hydrogels crosslinked via blue light-induced thiol-ene reaction on a rat corneal alkali burn model. Animals were divided into three groups (n = 7 rats per group): untreated, treated with 0.1% HA eye drops, and treated with crosslinked HA hydrogels. Crosslinking of HA hydrogel followed by the administration of HA eye drops and crosslinked HA hydrogels were carried out once a day from days 0–4. Corneal re-epithelialization, opacity, neovascularization, thickness, and histology were evaluated to compare the therapeutic effects of the three groups. Further investigation was conducted on the transparency of HA hydrogels to acquire the practical capabilities of hydrogel as a reservoir for drug delivery. Compared to untreated animals, animals treated with crosslinked HA hydrogels exhibited greater corneal re-epithelialization on days 1, 2, 4, and 7 post-injury (p = 0.004, p = 0.007, p = 0.008, and p = 0.034, respectively) and the least corneal neovascularization (p = 0.008). Histological analysis revealed lower infiltration of stromal inflammatory cells and compact collagen structure in crosslinked HA hydrogel-treated animals than in untreated animals. These findings corresponded with immunohistochemical analyses indicating that the expression of inflammatory markers such as α-SMA, MMP9, and IL1-β was lower in animals treated with crosslinked HA hydrogels than untreated animals and animals treated only with 0.1% HA eye drops. With beneficial pharmacological effects such as re-epithelization and anti-inflammation, in situ-forming hyaluronic acid (HA) hydrogels may be a promising approach to effective drug delivery in cases of corneal burn injuries.

•

Corneal chemical injuries can induce corneal opacification, limbal ischemia, and loss of vision.

•

Limitations for using topical eye drops includes maintaining the optimal concentration of the drug on the ocular surface.

•

Crosslinked HA hydrogels achieved rapid corneal re-epithelialization and low-grade neovascularization after chemical injury.

Comprehensive review on biotechnological production of hyaluronic acid: status, innovation, market and applications

The growing, existing demand for low-cost and high-quality hyaluronic acid (HA) needs an outlook of different possible production strategies from renewable resources with the reduced possibility of cross-infections. Recently, the possibility of producing HA from harmless microorganisms appeared, which offers the opportunity to make HA more economical, without raw material limitations, and environmentally friendly. HA production is mainly reported with Lancefield Streptococci A and C, particularly from S. equi and S. zooepidemicus. Various modes of fermentation such as batch, repeated batch, fed-batch, and continuous culture have been investigated to optimize HA production, particularly from S. zooepidemicus, obtaining a HA yield of 2.5 g L⁻¹ – 7.0 g L⁻¹. Among the different utilized DSP approaches of HA production, recovery with cold ethanol (4°C) and cetylpyridinium chloride is the ideal strategy for lab-scale HA production. On the industrial scale, besides using isopropanol, filtration (0.22 um), ultrafiltration (100 kDa), and activated carbon absorption are employed to obtain HA of low molecular weight and additional ultrafiltration to purify HA of higher MW. Even though mature technologies have already been developed for the industrial production of HA, the projections of increased sales volume and the expansion of application possibilities require new processes to obtain HA with higher productivity, purity, and specific molecular weights. In this review, we have put forth the progress of HA technological research by discussing the microbial biosynthetic aspects, fermentation and downstream strategies, industrial-scale scenarios of HA, and the prospects of HA production to meet the current and ongoing market demands.

Considerations for Polymers Used in Ocular Drug Delivery

PURPOSE

Age-related eye diseases are becoming more prevalent. A notable increase has been seen in the most common causes including glaucoma, age-related macular degeneration (AMD), and cataract. Current clinical treatments vary from tissue replacement with polymers to topical eye drops and intravitreal injections. Research and development efforts have increased using polymers for sustained release to the eye to overcome treatment challenges, showing promise in improving drug release and delivery, patient experience, and treatment compliance. Polymers provide unique properties that allow for specific engineered devices to provide improved treatment options. Recent work has shown the utilization of synthetic and biopolymer derived biomaterials in various forms, with this review containing a focus on polymers Food and Drug Administration (FDA) approved for ocular use.

METHODS

This provides an overview of some prevalent synthetic polymers and biopolymers used in ocular delivery and their benefits, brief discussion of the various types and synthesis methods used, and administration techniques. Polymers approved by the FDA for different applications in the eye are listed and compared to new polymers being explored in the literature. This article summarizes research findings using polymers for ocular drug delivery from various stages: laboratory, preclinical studies, clinical trials, and currently approved. This review also focuses on some of the challenges to bringing these new innovations to the clinic, including limited selection of approved polymers.

RESULTS

Polymers help improve drug delivery by increasing solubility, controlling pharmacokinetics, and extending release. Several polymer classes including synthetic, biopolymer, and combinations were discussed along with the benefits and challenges of each class. The ways both polymer synthesis and processing techniques can influence drug release in the eye were discussed.

CONCLUSION

The use of biomaterials, specifically polymers, is a well-studied field for drug delivery, and polymers have been used as implants in the eye for over 75 years. Promising new ocular drug delivery systems are emerging using polymers an innovative option for treating ocular diseases because of their tunable properties. This review touches on important considerations and challenges of using polymers for sustained ocular drug delivery with the goal translating research to the clinic.

Synthesis of self-assembled hyaluronan based nanoparticles and their applications in targeted imaging and therapy

Hyaluronan (HA) is a polysaccharide consisting of repeating disaccharides of N-acetyl-d-glucosamine and d-glucuronic acid. There are increasing interests in utilizing self-assembled HA nanoparticles (HA-NPs) for targeted imaging and therapy. The principal endogenous receptor of HA, cluster of differentiation 44 (CD44), is overexpressed on many types of tumor cells as well as inflammatory cells in human bodies. Active targeting from HA-CD44 mediated interaction and passive targeting due to the enhanced permeability retention (EPR) effect could lead to selective accumulation of HA-NPs at targeted disease sites. This review focuses on the synthesis strategies of self-assembled HA-NPs, as well as their applications in therapy and biomedical imaging.

Hyaluronan-coated nanoparticles for active tumor targeting: Influence of polysaccharide molecular weight on cell uptake

Here we aimed to correlate different molecular weights of hyaluronic acid (HA), 200, 800 and 1437 kDa, used to decorate poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs), to their cell uptakes. NP internalization kinetics in CD44-overexpressing breast carcinoma cells were quantified, using healthy fibroblast cells as reference. Actually, NP uptake and selectivity by tumor cells were maximized for NPs HA 800 kDa, while being minimum for NPs HA1400 kDa. This unexpected result could be explained considering that the interaction between NPs and tumor cells is dictated by rearrangement and conformation of that segment of HA chain that actually protrudes from the NPs. Overall, results obtained in this work point at how HA molecular weight, is pivotal project parameter in NP formulation to promote active targeting in the CD44 overexpressing cancer cells.

Tuning of Hydrogel Architectures by Ionotropic Gelation in Microfluidics: Beyond Batch Processing to Multimodal Diagnostics

Microfluidics is emerging as a promising tool to control physicochemical properties of nanoparticles and to accelerate clinical translation. Indeed, microfluidic-based techniques offer more advantages in nanomedicine over batch processes, allowing fine-tuning of process parameters. In particular, the use of microfluidics to produce nanoparticles has paved the way for the development of nano-scaled structures for improved detection and treatment of several diseases. Here, ionotropic gelation is implemented in a custom-designed microfluidic chip to produce different nanoarchitectures based on chitosan-hyaluronic acid polymers. The selected biomaterials provide biocompatibility, biodegradability and non-toxic properties to the formulation, making it promising for nanomedicine applications. Furthermore, results show that morphological structures can be tuned through microfluidics by controlling the flow rates. Aside from the nanostructures, the ability to encapsulate gadolinium contrast agent for magnetic resonance imaging and a dye for optical imaging is demonstrated. In conclusion, the polymer nanoparticles here designed revealed the dual capability of enhancing the relaxometric properties of gadolinium by attaining Hydrodenticity and serving as a promising nanocarrier for multimodal imaging applications.