Rationalising polymer selection for supersaturated film forming systems produced by an aerosol spray for the transdermal delivery of methylphenidate

Development of Film-Forming Gel Formulations Containing Royal Jelly and Honey Aromatic Water for Cosmetic Applications

This study aimed to develop a film-forming gel containing honey aromatic water (HW) and royal jelly (RJ) for cosmetic applications as a facial peel-off mask. HW, which is industrial waste from the water-reduction process of honey, was sterilized by autoclaving and filtration through a 0.22 µm membrane. The film-forming gels were developed using various types of film-forming polymers, including polyvinyl alcohol (PVA 117), carboxymethyl cellulose (CMC), and hydroxyethyl cellulose (HEC). The gel formulations were characterized in terms of their external appearance, viscosity, pH, and drying time, whereas the films generated were characterized by a texture analyzer, microscopic investigation, Fourier transform infrared, and an X-ray diffractometer. The findings highlighted that HW has short storage shelf life due to microbial contamination. Sterilizations were required before further product development. The film-forming gel was created by using the combination of PVA 117, CMC, and HEC. HW and RJ were successfully incorporated into the film-forming gel. However, HW resulted in a decrease in the gel viscosity and mechanical properties of its film. Interestingly, the drying time was dramatically decreased, which would be more desirable for its use as a peel-off mask. Furthermore, incorporation of royal jelly enhanced the viscosity of the gels as well as improved the mechanical properties of the film. No effect on the chemical and crystal structure of the films was detected after the incorporation. Therefore, the film-forming gels containing HW and RJ, possessing aesthetic attributes that extended to both the gels themselves and the resultant films, were suitable for use as a peel-off mask.

Newfangled Topical Film-Forming Solution for Facilitated Antifungal Therapy: Design, Development, Characterization, and In Vitro Evaluation

Luliconazole is a broad-spectrum topical antifungal agent that acts by altering the synthesis of fungi cell membranes. Literature suggests that the recurrence of fungal infection can be avoided by altering the pH of the site of infection. Studies have also suggested that fungi thrive by altering skin pH to be slightly acidic, i.e., pH 3-5. The current study is aimed to design, develop, characterize, and evaluate an alkaline pH-based antifungal spray solution for antifungal effects. Luliconazole was used as an antifungal agent and an alkaline spray was formulated for topical application by using Eudragit RS 100, propylene glycol (PG), water, sodium bicarbonate, and ethanol via solubilization method. Herein, sodium bicarbonate was used as an alkalizing agent. Based on DSC, FTIR, PXRD, scanning electron microscopy (SEM), and rheological analysis outcomes, the drug (luliconazole) and polymer were found to be compatible. F-14 formulation containing 22% Eudragit RS 100 (ERS), 1.5% PG, and 0.25% sodium bicarbonate was optimized by adopting the quality by design approach by using design of experiment software. The viscosity, pH, drying time, volume of solution post spraying, and spray angle were, 14.99 ± 0.21 cp, 8 pH, 60 s, 0.25 mL ± 0.05 mL, and 80 ± 2, respectively. In vitro drug diffusion studies and in vitro antifungal trials against Candida albicans revealed 98.0 ± 0.2% drug diffusion with a zone of inhibition of 9 ± 0.12 mm. The findings of the optimized luliconazole topical film-forming solution were satisfactory, it was compatible with human skin, and depicted sustained drug release that suggests promising applicability in facilitated topical antifungal treatments.

Science of, and insights into, thermodynamic principles for dermal formulations

Studies have demonstrated the significant role of the thermodynamic activity of drugs in skin drug delivery. This thermodynamic activity works as a driving force for increasing/improving the absorption of drugs by the skin. It can be changed according to the physicochemical parameters (e.g., solubility, partition coefficient, and water activity) of the drug in the vehicle. Thermodynamic principles have been used for the development of novel topical and transdermal delivery systems, demonstrating the importance of thermodynamic activity in enhancing drug permeation through the skin. In this review, we provide insights into thermodynamic principles and their roles in optimizing topical and transdermal drug delivery systems.

Film Forming Systems for Delivery of Active Molecules into and across the Skin

We have investigated delivery systems that can form a structured matrix film on the skin after their application. In a previous work, we have shown that Weblike film forming systems (also called Pouches Drug Delivery Systems, PDDS) enable enhanced skin delivery of the incorporated molecules. These delivery systems are composed of one or more phospholipids, a short-chain alcohol, a polymer and optionally water. In this work, we continue the investigation and characterization of Weblike carriers focusing on some factors affecting the delivery properties such as components concentration and mode of application on the skin. Upon non-occluded application on the skin, the systems dry rapidly, forming a web-like structured film. Lidocaine, Ibuprofen, FITC and Cannabidiol are molecules with various physico-chemical properties that were incorporated in the carrier. The systems were tested in a number of in vitro and in vivo experiments. Results of the in vitro permeation of Ibuprofen through porcine skin indicated two-fold delivery through the skin of Ibuprofen when applied from our Weblike system in comparison with a nanovesicular carrier, the ethosome. We also have investigated weblike systems containing hemp seed oil (HSO). This addition enhanced the film's ability to deliver lipophilic molecules to the deeper skin layers, leading to an improved pharmacodynamic effect. In analgesic tests carried out in a pain mice model following one hour application of CBD in Weblike system with and without HSO, the number of writhing episodes was decreased from 29 in the untreated animals to 9.5 and 18.5 writhes, respectively. The results of our work open the way towards a further investigation of Weblike film forming systems containing drugs for improved dermal and transdermal treatment of various ailments.

Spray Film-Forming systems as promising topical in situ Systems: A review

Spray film-forming systems (SFFSs) provide great potential for the treatment of various types of wounds. Such systems afford to prolong the action of active substances, to prevent cross-contamination, and to ensure accelerated wound healing. Spray films are known since the mid-20th century, and nowadays they are widely used to treat minor skin injuries, but numerous clinical cases describe their successful use in the treatment of burns, wounds, bedsores, etc. The current level of polymer development and composite synthesis has greatly expanded the possibilities of creating compositions of spray film-forming systems. Scattered information and lack of standardization of such delivery systems creates difficulties for pharmaceutical development. This review highlights most of the existing requirements and suggestions from studies to standardize the characteristics of SFFSs and classify them based on scientific sources and regulatory documentation, as well as the position of such systems in the pharmaceutical market. The search and evaluation of known characterization methods and their modifications, as well as the approval of their list (separately for development and for standardization) can potentially increase the research interest in the problem of spray film-forming systems development and contribute to the registration of new drugs and medical devices in this promising dosage form, including with its own pharmacological effect.

Preparation and Evaluation of Vitamin D3 Supplementation as Transdermal Film-Forming Solution

Vitamin D3 is available in oral and injectable dosage forms. Interest in the transdermal route as an alternative to the oral and parenteral routes has grown recently. In this study, several film-forming solutions for the transdermal delivery of vitamin D3 were prepared. They contained 6000 IU/mL of vitamin D3 that formed a dry and acceptable film in less than 5 min after application. The formulations consisted of ethanol and acetone 80:20, and one or more of the following ingredients: Eudragit L100-55, PVP, PG, limonene, oleic acid, camphor, and menthol. Vitamin D3 release was studied from both the film-forming solution and pre-dried films using a Franz diffusion cell. The film-forming solution released a significant amount of vitamin D3 compared to the dry film, which is attributed mostly to the saturation driving force due to the evaporation of volatile solvents. In vitro permeation studies through artificial skin Strat M^® membrane revealed that the cumulative amount of vitamin D3 permeated after 24 h under the experimental conditions was around 800 IU across 3.14 cm². The cumulative permeation curve showed faster permeation in earlier stages. Young's modulus, viscosity, and pH of the formulations were determined. Most of the formulations were stable for 3 weeks.

The effect of dilution of fusidic acid cream and betamethasone dipropionate cream in complex extemporaneous mixes on formulation performance

The Aron regimen is an unconventional therapy which entails frequent applications of an extemporaneously prepared three component system (a topical antibiotic, a corticosteroid and an emollient), with the intention of decolonising the skin of S. aureus whilst treating atopic dermatitis. The impact of heavily diluting these topical medicinal products, to differing extents, on formulation performance is not well understood thus was investigated in this study. Following a single application of a range of compounded Aron mixes (fusidic acid and betamethasone dipropionate diluted to varying extents in an emollient base), significant reductions in the expected drug flux across silicone membrane, ex vivo percutaneous absorption and skin retention of both drugs relative to the marketed products were observed. This was attributed to a number of complex formulation effects making such changes difficult to predict in a clinical setting. Further investigations are required to evaluate the impact of frequent applications of the Aron mix to widespread areas on clinical efficacy, antimicrobial resistance and long term side effects.

Coupling AFM, DSC and FT-IR towards Elucidation of Film-Forming Systems Transformation to Dermal Films: A Betamethasone Dipropionate Case Study

Polymeric film-forming systems have emerged as an esthetically acceptable option for targeted, less frequent and controlled dermal drug delivery. However, their dynamic nature (rapid evaporation of solvents leading to the formation of thin films) presents a true characterization challenge. In this study, we tested a tiered characterization approach, leading to more efficient definition of the quality target product profiles of film-forming systems. After assessing a number of physico-chemico-mechanical properties, thermal, spectroscopic and microscopic techniques were introduced. Final confirmation of betamethasone dipropionate-loaded FFS biopharmaceutical properties was sought via an in vitro skin permeation study. A number of applied characterization methods showed complementarity. The sample based on a combination of hydrophobic Eudragit^® RS PO and hydroxypropyl cellulose showed higher viscosity (47.17 ± 3.06 mPa·s) and film thickness, resulting in sustained skin permeation (permeation rate of 0.348 ± 0.157 ng/cm² h), and even the pH of the sample with Eudragit^® NE 30D, along with higher surface roughness and thermal analysis, implied its immediate delivery through the epidermal membrane. Therefore, this study revealed the utility of several methods able to refine the number of needed tests within the final product profile.

The use of optical differential scanning calorimetry to investigate ibuprofen miscibility in polymeric films for topical drug delivery

Understanding drug miscibility in pharmaceutically relevant systems is essential for the development and optimisation of pharmaceutical dosage forms. This is particularly true for film forming systems which are designed to become supersaturated with drug, following application on the skin surface, whilst maintaining the physical stability of the drug for a suitable period to enhance drug delivery. For such formulations, chemical penetration enhancers as well as the drug are absorbed from the formulation into the skin, making understanding drug delivery from the films challenging. This study investigated the use of an optical differential scanning calorimetry (DSC) to understand drug miscibility in polymeric film forming systems and explain drug transport behaviour from film forming formulations, containing ibuprofen, a copolymer based on dimethylaminoethyl methacrylate, butyl methacrylate, and methyl methacrylate (Eudragit® E, EuE), a copolymer based on ethyl acrylate, methyl methacrylate and methacrylic acid ester with quaternary ammonium groups (Eudragit® RS, EuRS) and a copolymer based on methacrylic acid and methyl methacrylate (Eudragit® S, EuS), with and without the chemical penetration enhancer propylene glycol, across a model membrane. The optical DSC enabled the rapid screening of not only drug-polymer miscibility, but also drug-vehicle miscibility, while considering both the melting-point depression and melting enthalpy of the drug due to the presence of the polymer/polymer-based vehicle, obtained via thermal analysis by structural characterisation (TASC) and DSC analysis, respectively. The results obtained enable the polymers studied to be ranked in the order of EuE > EuRS > EuS, with EuE being more miscible with ibuprofen, and the incorporation of a penetration enhancer in the film forming system formulation was found to increase ibuprofen solubility in EuE- and EuRS- based films. The drug-polymer/vehicle miscibility information obtained via optical DSC provided understanding of drug transport from film forming systems with the higher miscibility of ibuprofen with EuE reducing drug transport through decreasing drug saturation in the film. The higher drug transport from films containing EuRS and EuS could also be linked to drug miscibility with the polymer and showed dependence on ibuprofen loading in the formulation. Overall optical DSC has been demonstrated to be a valuable tool for determining drug-vehicle miscibility for pharmaceutical product development.

Film-Forming Systems for Dermal Drug Delivery

Film-forming formulations represent a novel form of sustained release dermatic products. They are applied to the skin as a liquid or semi-solid preparation. By evaporation of the volatile solvent on the skin, the polymer contained in the formulation forms a solid film. Various film-forming formulations were tested for their water and abrasion resistance and compared with conventional semi-solid formulations. Penetration and permeation studies of the formulations indicate a potential utility as transdermal therapeutic systems. They can be used as an alternative to patch systems to administer a variety of drugs in a topical way and may provide sustained release characteristics.

PLGA based film forming systems for superficial fungal infections treatment

As proven in clinical trials, superficial fungal infections can be effectively treated by single topical application of terbinafine hydrochloride (Ter-HCl) in a film forming system (FFS). Poly(lactic-co-glycolic acid) (PLGA) derivatives, originally synthesized with intention to get carriers with optimized properties for drug delivery, and multifunctional plasticizers - ethyl pyruvate, methyl salicylate, or triacetin - were used for formulation of Ter-HCl loaded FFSs. After spraying, a biodegradable, transparent, adhesive, and occlusive thin layer is formed on the skin, representing drug depot. In situ formed films were characterized by thermal, structural, viscoelastic, and antifungal properties as well as drug release and skin penetration. DSC and SEM showed fully amorphous films with Ter-HCl dissolved in PLGA in high concentration (up to 15%). FFSs are viscoelastic fluids with viscosity which can be easily adjusted by the type of plasticizer used and its concentration. The formulations showed excellent bioadhesion properties, thus ensuring persistence on the skin. In situ film based on branched PLGA/A plasticized with 10% of ethyl pyruvate allowed prolonged release of Ter-HCl by linear kinetics for the first 6 days with a total time of almost 14 days. During ex vivo human skin penetration experiment, Ter-HCl was found to be located only in its target layer, the epidermis. According to our results, plasticized branched PLGA derivatives loaded by Ter-HCl are suitable for the development of FFSs for superficial fungal infections treatment.

Film-Forming Sprays for Topical Drug Delivery

Film-forming sprays offer many advantages compared to conventional topical preparations because they can provide uniform drug distribution and dose, increased bioavailability, lower incidence of irritation, continuous drug release, and accelerated wound healing through moisture control. Film-forming sprays consist of polymers and excipients that improve the characteristics of preparations and enhance the stability of active substances. Each type of polymer and excipient will produce films with different features. Therefore, the various types of polymers and excipients and their evaluation standards need to be examined for the development of a more optimal form of film-forming spray. The selected literature included research on polymers as film-forming matrices and the application of these sprays for medical purposes or for potential medical use. This article discusses the types and concentrations of polymers and excipients, sprayer types, evaluations, and critical parameters in determining the sprayability and film characteristics. The review concludes that both natural and synthetic polymers that have in situ film or viscoelastic properties can be used to optimise topical drug delivery.

Design and optimization of film-forming gel of etoricoxib using research surface methodology

The present investigation is focused on the development of transdermal film-forming gel (FFG) loaded with etoricoxib employing research surface methodology (RSM). Box-Behnken surface design method was used to develop experimental run using different concentrations of etoricoxib, hydroxypropyl methylcellulose (HPMC K100M), and eudragit RL100 as independent variables, and Derringer's optimization tool was employed to optimize best possible formulation. The dependent variables considered in this study were viscosity and drug permeation at 24 h (Q24, μg/cm²). Anti-inflammatory study was performed on Wistar albino rats for 8 h. Skin irritation studies and accelerated stability studies were performed for validated FFG formulations. Quadratic model was found to be best fit model (p < 0.0001) for both the responses. The influence of HPMC concentration on the viscosity was found to be highest whereas concentration of etoricoxib was maximum for Q24. The optimum composition of the FFG was observed to be 4% of etoricoxib, 1.1246% of HPMC, and 0.4% of eudragit. Above composition resulted in viscosity of 1549.5 mPa.s and maximum Q24 of 4639.11 μg/cm² with desirability 0.918. The in vivo anti-inflammatory study demonstrated better sustained release effect (for 8 h) of optimized FFG compared to orally administered drug suspension. An average irritation score of 0.555 was observed on Draize scoring system. The validated FFG formulation was found to be stable for the 3 months in accelerated conditions. It can be concluded from the above investigations that the validated FFG formulation of etoricoxib is well tolerated and could provide sustained drug release for 8 h. Graphical abstract.

Controlled Release Film Forming Systems in Drug Delivery: The Potential for Efficient Drug Delivery

Despite many available approaches for transdermal drug delivery, patient compliance and drug targeting at the desired concentration are still concerns for effective therapies. Precise and efficient film-forming systems provide great potential for controlling drug delivery through the skin with the combined advantages of films and hydrogels. The associated disadvantages of both systems (films and hydrogels) will be overcome in film-forming systems. Different strategies have been designed to control drug release through the skin, including changes to film-forming polymers, plasticizers, additives or even model drugs in formulations. In the current review, we aim to discuss the recent advances in film-forming systems to provide the principles and review the methods of these systems as applied to controlled drug release. Advances in the design of film-forming systems open a new generation of these systems.

The use of heat and chemical penetration enhancers to increase the follicular delivery of erythromycin to the skin

The effect of heat on the follicular absorption of drugs into the skin has not previously been investigated. In comparison to drug delivery across the continuous stratum corneum (SC), follicular absorption is known to be relatively rapid and therefore the use of short durations of heat may be particularly useful for enhancing drug delivery to the hair follicles, as well as being practical for patients to use. In this study erythromycin has been used as a model drug and the combined use of heat and chemical penetration enhancers was found to be able to synergistically increase the penetration of erythromycin into human skin via the follicular route. Moreover durations of heat application as short as 10 min in combination with particular enhancer systems were found to be sufficient to significantly increase erythromycin delivery to the skin. Overall the data indicate that the use of heat with chemical penetration enhancers offers a potentially valuable strategy for delivering drugs via the follicular route.

Medicated Foams and Film Forming Dosage Forms as Tools to Improve the Thermodynamic Activity of Drugs to be Administered Through the Skin

Medicated foams and film forming systems are dosage forms formulated to undergo a con-trolled metamorphosis when applied on the skin. Indeed, due to the presence of propellant or a particular air-spray foam pump, a liquid can generate foam when applied on the stratum corneum, or a liquid or conventional dosage form can form on the skin a continuous film as a consequence of the solvent evapora-tion. Thanks to these controlled modifications, the drug thermodynamic activity increases favoring the skin penetration and, therefore, the bioavailability with respect to conventional semi-solid and liquid dosage forms. Furthermore, the available clinical data also evidence that these dosage forms improve the patient’s compliance. The main formulative aspects of medicated foams and film forming systems are reviewed with the aim to underline the possible advantages in terms of biopharmaceutical performances and pa-tient’s adherence.

QuilliChew extended-release chewable tablets for the treatment of ADHD in patients ages 6 years old and above

INTRODUCTION

Attention-deficit/hyperactivity disorder (ADHD) is a common neurobehavioral disorder affecting as many as 6.4 million children and adolescents in the United States. Since amphetamine (AMPH) and methylphenidate (MPH) were found to be effective more than 60 years ago, numerous formulations of these compounds have been developed. New preparations have focused on convenience, with extended-release (ER) drugs allowing once-daily dosing. Multiple ER formulations do not require patients to swallow a tablet or capsule. Recent ER preparations include liquids, oral disintegrating tablets, and chewable tablets. Several new formulations use ion exchange technology containing both immediate-release and ER components. Areas covered: Quillichew ER^TM (MPH-ERCT) is an ER methylphenidate designed to be chewed before swallowing. The technology and pharmacokinetics, along with efficacy and safety data, are presented. Expert opinion: Extensive safety and efficacy data exist for MPH. ER formulations can be distinguished by preparation (tablet, capsule, liquid) and onset and duration of effect, but efficacy is similar for all ER MPH products. Each formulation has attributes, such as ease of titration, portability, and taste, that make it more acceptable for certain patients. Because AMPH and MPH are so effective, current technology research is focused on improving safety, convenience, and onset and duration of effect.