Zeta potential changing self-emulsifying drug delivery systems containing phosphorylated polysaccharides

Applications and advancements of polysaccharide-based nanostructures for enhanced drug delivery

Growing demand for highly effective, site-specific delivery of pharmaceuticals and nutraceuticals using nano-sized carriers has prompted increased scrutiny of carrier biocompatibility and biodegradability. To address these concerns, biodegradable natural polymers have emerged as a transformative domain, offering non-toxic, precisely targetable carriers capable of finely modulating cargo pharmacokinetics while generating innocuous decomposition by-products. This comprehensive review illuminates the emergence of polysaccharide-based nanoparticulate drug delivery systems. These systems establish an interactive interface between drug and targeted organs, guided by strategic modifications to polysaccharide backbones, which facilitate the creation of morphologically, constitutionally, and characteristically vibrant nanostructures through various fabrication routes, underpinning their pivotal role in biomedical applications. Advancements crucial to enhancing polysaccharide-based drug delivery, such as surface modifications and bioinspired modifications for enhanced targeting, and stimuli-responsive release, strategies to overcome biological barriers, enhance tumor penetration, and optimize therapeutic outcomes are highlighted. This review also examines some potent challenges, and the contemporary way out of them, and discusses future perspectives in the field.

Zeta potential changing self-nanoemulsifying drug delivery systems: A newfangled approach for enhancing oral bioavailability of poorly soluble drugs

The mucus is a defensive barrier for different drug-loaded systems. To overcome this obstacle, the crucial factor is the surface charge. Due to mucus negative charge behavior; it was revealed that negatively charged formulations can move across mucus, whereas positively charged nanoformulations could not diffuse via mucus due to interactions. However, cellular intake of negatively charged nanoformulations to the epithelium by endocytosis is less prominent as compared to positively charged carriers. Self-emulsifying drug delivery systems (SEDDS) improve the drug permeability of drugs, especially which have poor oral drug solubility. Moreover, SEDDS have the ability to reduce the degradation of drugs in the GI tract. Currently, drug carrier systems that can shift zeta potential from negative to positive were developed. The benefits of inducing zeta potential changing approach are that negatively charged nanoformulations permeate quickly across the mucus and surface charges reversed to positive at epithelium surface to increase cellular uptake. Among various systems of drug delivery, zeta potential changing SEDDS seem to signify a promising approach as they can promptly diffuse over mucus due to their smaller size and shape distortion ability. Due to such findings, mucus permeation and drug diffusion may improve by the mixture of the zeta potential changing approach and SEDDS.

Charge-Reversible Nanoparticles: Advanced Delivery Systems for Therapy and Diagnosis

The past two decades have witnessed a rapid progress in the development of surface charge-reversible nanoparticles (NPs) for drug delivery and diagnosis. These NPs are able to elegantly address the polycation dilemma. Converting their surface charge from negative/neutral to positive at the target site, they can substantially improve delivery of drugs and diagnostic agents. By specific stimuli like a shift in pH and redox potential, enzymes, or exogenous stimuli such as light or heat, charge reversal of NP surface can be achieved at the target site. The activated positive surface charge enhances the adhesion of NPs to target cells and facilitates cellular uptake, endosomal escape, and mitochondrial targeting. Because of these properties, the efficacy of incorporated drugs as well as the sensitivity of diagnostic agents can be essentially enhanced. Furthermore, charge-reversible NPs are shown to overcome the biofilm formed by pathogenic bacteria and to shuttle antibiotics directly to the cell membrane of these microorganisms. In this review, the up-to-date design of charge-reversible NPs and their emerging applications in drug delivery and diagnosis are highlighted.

Phosphorylated polysaccharides: Applications, natural abundance, and new-to-nature structures generated by chemical and enzymatic functionalization

Polysaccharides are foreseen as serious candidates for the future generation of polymers, as they are biosourced and biodegradable materials. Their functionalisation is an attractive way to modify their properties, thereby increasing their range of applications. Introduction of phosphate groups in polysaccharide chains for the stimulation of the immune system was first described in the nineteen seventies. Since then, the use of phosphorylated polysaccharides has been proposed in various domains, such as healthcare, water treatment, cosmetic, biomaterials, etc. These alternative usages capitalize on newly acquired physico-chemical or biological properties, leading to materials as diverse as flame-resistant agents or drug delivery systems. Phosphorylated polysaccharides are found in Nature and need to be extracted to assess their biological potential. However, they are not abundant, often present complex backbones hard to characterize, and most of them have a low phosphate content. These drawbacks have pushed forward the development of chemical phosphorylation employing a wide variety of phosphorylating agents to obtain polysaccharides with a large range of phosphate content. Chemical phosphorylation requires the use of harsh conditions and toxic, petroleum-based solvents, which hinders their exploitation in the food and health industry. Over the last 20 years, although enzymes are regiospecific catalysts that work in aqueous and mild conditions, enzymatic phosphorylation has been little investigated. To date, only three families of enzymes have been used for the in vitro phosphorylation of polysaccharides. Considering the number of unresolved metabolic pathways leading to phosphorylated polysaccharides, the huge diversity of kinase sequences, and the recent progress in protein engineering one can envision native and engineered kinases as promising tools for polysaccharide phosphorylation.

Mannosylated Systems for Targeted Delivery of Antibacterial Drugs to Activated Macrophages

Macrophages are a promising target for drug delivery to influence macrophage-associated processes in the body, namely due to the presence of resistant microorganisms in macrophages. In this work, a series of mannosylated carriers based on mannan, polyethylenimine (PEI) and cyclodextrin (CD) was synthesized. The molecular architecture was studied using FTIR and 1H NMR spectroscopy. The particle size, from small 10-50 nm to large 500 nm, depending on the type of carrier, is potentially applicable for the creation of various medicinal forms: intravenous, oral and inhalation. Non-specific capture by cells with a simultaneous increase in selectivity to CD206+ macrophages was achieved. ConA was used as a model mannose receptor, binding galactosylated (CD206 non-specific) carriers with constants of the order of 104 M-1 and mannosylated conjugates of 106-107 M-1. The results of such primary "ConA-screening" of ligands are in a good agreement in terms of the comparative effectiveness of the interaction of ligands with the CD206+ macrophages: non-specific (up to 10%) absorption of highly charged and small particles; weakly specific uptake of galactosylated polymers (up to 50%); and high affine capture (more than 70-80%) of the ligands with grafted trimannoside was demonstrated using the cytometry method. Double and multi-complexes of antibacterials (moxifloxacin with its adjuvants from the class of terpenoids) were proposed as enhanced forms against resistant pathogens. In vivo pharmacokinetic experiments have shown that polymeric carriers significantly improve the efficiency of the antibiotic: the half-life of moxifloxacin is increased by 2-3 times in conjugate-loaded forms, bio-distribution to the lungs in the first hours after administration of the drug is noticeably greater, and, after 4 h of observation, free moxifloxacin was practically removed from the lungs of rats. Although, in polymer systems, its content is significant-1.2 µg/g. Moreover, the importance of the covalent crosslinking carrier with mannose label was demonstrated. Thus, this paper describes experimental, scientifically based methods of targeted drug delivery to macrophages to create enhanced medicinal forms.

Preparation and characterization of garlic polysaccharide-Zn (II) complexes and their bioactivities as a zinc supplement in Zn-deficient mice

•

Garlic polysaccharide-Zn (II) complexes were prepared.

•

The structural characterization confirmed the formation of complexes.

•

The complexes could significantly improve the health of Zn-deficient mice.

This study explored the potential of garlic polysaccharides (GPs) as a carrier for synthesizing GP-Zn (II) complexes to supplement Zn. According to the response surface analysis, the optimal preparation conditions were: mass ratio of GPs to Zn²⁺ 1:0.21, temperature 53 °C, pH 5.9 and time 148.75 min, with the maximum chelation rate of 90.11%. The chelation of GPs and Zn²⁺ involved O—H/C—O/O—C—O groups, increased crystallinity and altered absorption peaks of circular dichroism spectra, with a higher thermal stability, particle size and negative zeta potential. Compared with inorganic zinc salts, supplementation of GP-Zn (II) complexes showed enhance zinc supplementation effects in Zn-deficient mice model: increased body weight, organ index and Zn (II) levels in serum and liver, enhanced Superoxidedismutase (SOD) activity and alkaline phosphatase activity, decreased NO content and Malondialdehyde (MDA) content and improved colon and testicular morphology. Therefore, GP-Zn (II) complex can be used as a potential zinc supplement for Zn-deficient individuals.

Mannosylated Polymeric Ligands for Targeted Delivery of Antibacterials and Their Adjuvants to Macrophages for the Enhancement of the Drug Efficiency

Bacterial infections and especially resistant strains of pathogens localized in macrophages and granulomas are intractable diseases that pose a threat to millions of people. In this paper, the theoretical and experimental foundations for solving this problem are proposed due to two key aspects. The first is the use of a three-component polymer system for delivering fluoroquinolones to macrophages due to high-affinity interaction with mannose receptors (CD206). Cytometry assay determined that 95.5% macrophage-like cells were FITC-positive after adding high-affine to CD206 trimannoside conjugate HPCD-PEI1.8-triMan, and 61.7% were FITC-positive after adding medium-affine ligand with linear mannose label HPCD-PEI1.8-Man. The second aspect is the use of adjuvants, which are synergists for antibiotics. Using FTIR and NMR spectroscopy, it was shown that molecular containers, namely mannosylated polyethyleneimines (PEIs) and cyclodextrins (CDs), load moxifloxacin (MF) with dissociation constants of the order of 10-4-10-6 M; moreover, due to prolonged release and adsorption on the cell membrane, they enhance the effect of MF. Using CLSM, it was shown that eugenol (EG) increases the penetration of doxorubicin (Dox) into cells by an order of magnitude due to the creation of defects in the bacterial wall and the inhibition of efflux proteins. Fluorescence spectroscopy showed that 0.5% EG penetrates into bacteria and inhibits efflux proteins, which makes it possible to increase the maximum concentration of the antibiotic by 60% and maintain it for several hours until the pathogens are completely neutralized. Regulation of efflux is a possible way to overcome multiple drug resistance of both pathogens and cancer cells.

Bioavailability Enhancement Techniques for Poorly Aqueous Soluble Drugs and Therapeutics

The low water solubility of pharmacoactive molecules limits their pharmacological potential, but the solubility parameter cannot compromise, and so different approaches are employed to enhance their bioavailability. Pharmaceutically active molecules with low solubility convey a higher risk of failure for drug innovation and development. Pharmacokinetics, pharmacodynamics, and several other parameters, such as drug distribution, protein binding and absorption, are majorly affected by their solubility. Among all pharmaceutical dosage forms, oral dosage forms cover more than 50%, and the drug molecule should be water-soluble. For good therapeutic activity by the drug molecule on the target site, solubility and bioavailability are crucial factors. The pharmaceutical industry’s screening programs identified that around 40% of new chemical entities (NCEs) face various difficulties at the formulation and development stages. These pharmaceuticals demonstrate less solubility and bioavailability. Enhancement of the bioavailability and solubility of drugs is a significant challenge in the area of pharmaceutical formulations. According to the Classification of Biopharmaceutics, Class II and IV drugs (APIs) exhibit poor solubility, lower bioavailability, and less dissolution. Various technologies are discussed in this article to improve the solubility of poorly water-soluble drugs, for example, the complexation of active molecules, the utilization of emulsion formation, micelles, microemulsions, cosolvents, polymeric micelle preparation, particle size reduction technologies, pharmaceutical salts, prodrugs, the solid-state alternation technique, soft gel technology, drug nanocrystals, solid dispersion methods, crystal engineering techniques and nanomorph technology. This review mainly describes several other advanced methodologies for solubility and bioavailability enhancement, such as crystal engineering, micronization, solid dispersions, nano sizing, the use of cyclodextrins, solid lipid nanoparticles, colloidal drug delivery systems and drug conjugates, referring to a number of appropriate research reports.

Development of Self-Emulsifying Drug Delivery Systems (SEDDSs) Displaying Enhanced Permeation of the Intestinal Mucus Following Sustained Release of Prototype Thiol-Based Mucolytic Agent Load

In this study, mucoactive self-emulsifying drug delivery systems (SEDDSs) based on sustained release of N-acetylcysteine (NAC) were developed for providing effective intestinal mucopermeation. Polymeric ionic complexes of NAC were formed with polyethyleneimine (PEI), Eudragit E 100, and Eudragit RS 100 and loaded into a novel SEDDS. The SEDDSs exhibited a stable average size of 75 ± 12 nm (polydispersity index (PDI) < 0.3) and showed a rise in the zeta potential from −17.31 mV to −7.72 mV. On Caco-2 cells, SEDDSs at 1−3% were non-cytotoxic. An average of 91.8 ± 5.4% NAC was released from SEDDSs containing Eudragit E 100 (p ≤ 0.05) and Eudragit RS 100 (p ≤ 0.001) complexes at a significantly slower rate within 80 min, whereas the SEDDS containing PEI released NAC in a matter of seconds. Similarly, the SEDDS complexes revealed a time-dependent reduction in mucus dynamic viscosity of 52.6 ± 19.9%. Consequently, as compared with a blank SEDDS, mucodiffusion revealed about 2- and 1.8-fold significantly greater mucopermeation of SEDDSs anchoring Eudragit E 100−NAC and RS 100−NAC complexes (p ≤ 0.05), respectively. The mucoactive SEDDSs, which steadily released NAC while permeating the mucus, were linked to a significantly increased mucopermeation in vitro as a result of optimal mucolytic targeting.

Lipopolysaccharide Nanosystems for the Enhancement of Oral Bioavailability

Nanosystems that incorporate both polymers and lipids have garnered attention as emerging nanotechnology approach for oral drug delivery. These hybrid systems leverage on the combined properties of polymeric and lipid-based nanocarriers while eliminating their inherent limitations. In view of the safety-related benefits of naturally occurring polymers, we have focused on systems incorporating polysaccharides and derivatives into the hybrid structure. The aim of this review is to evaluate existing biopolymers with specific focus on lipopolysaccharide hybrid systems and their advancement toward enhancing oral drug delivery. Furthermore, we shall identify future research areas that require further exploration toward achieving an optimized hybrid system for easy translation into clinical use. In this review, we have appraised formulations that combined polysaccharides/derivatives with lipids in a single nanocarrier system. These formulations were grouped into lipid-core-polysaccharide-shell systems, polysaccharide-core-lipid-shell systems, self-emulsifying lipopolysaccharide hybrid systems, and hybrid lipopolysaccharide matrix systems. In these systems, we highlighted how the polysaccharide phase enhances the oral absorption of encapsulated bioactives with regard to their function and mechanism. The various lipopolysaccharide designs presented in this review demonstrated significant improvement in pharmacokinetics of bioactives. A multitude of studies found lipopolysaccharide hybrid systems as nascent nanoplatforms for the oral delivery of challenging bioactives due to features that favor gastrointestinal absorption and bioavailability improvement. With future research already geared toward product optimization and scaling up processes, as well as detailed pharmacological and toxicology pre-clinical testing, these versatile systems will have remarkable impact in clinical application.

Dual-Acting Zeta-Potential-Changing Micelles for Optimal Mucus Diffusion and Enhanced Cellular Uptake after Oral Delivery

Context: Overcoming the intestinal mucosal barrier can be a challenge in drug delivery. Nanoemulsions with negative zeta potentials can effectively permeate the mucus layer, but those with positive zeta potentials are better taken up by cells; a nanoemulsion with capricious zeta potential from negative to positive can achieve both good permeation and high uptake. Objective: This study aimed to develop dual-acting zeta-potential-amphoteric micelles enabling optimal muco-permeation and enhancement of cellular uptake. Methods: A micellar pre-concentrate was prepared from 15% Labrasol, 15% Kolliphor EL, 30% Kolliphor RH 40, and 40% dimethylsulfoxide. The micellar pre-concentrate was loaded with anionic stearic acid (SA), forming ionic complexes with cationic polymers at a ratio of 25:1 with Eudragit RS 100 and Eudragit RL 100. Blank micelles and those containing complexes were separately diluted in physiological buffers and examined for their droplet sizes, polydispersity indices (PDIs), zeta potentials, and cytotoxicity. The SA release from the micellar complexes was evaluated in 0.1 mM phosphate buffer (pH 6.8) containing 0.001% fluorescein, thereby enabling an instant decrease in fluorescence. Finally, the micelles were loaded with the model drug fluorescein diacetate (FDA) and evaluated for their muco-permeation behavior and cellular uptake. Results: The micellar dilutions formed micelles at the critical micelle concentration (CMC) of 312 µg/mL and showed a uniform average droplet size of 14.2 nm, with a PDI < 0.1. Micellar dilutions were non-cytotoxic when used at 1:100 in a physiological medium. Micelles loaded with ionic complexes achieved a sustained release of 95.5 ± 3.7% of the SA in 180 min. Moreover, the zeta potential of the complex-loaded micelles shifted from −5.4 to +1.8 mV, whereas the blank micelles showed a stabilized zeta potential of −10 mV. Furthermore, the negatively charged blank and complex-loaded micelles exhibited comparable muco-permeation, with an overall average of 58.2 ± 3.7% diffusion of FDA. The complex-loaded micellar droplets, however, provided a significantly higher cellular uptake of the model drug FDA (2.2-fold, p ≤ 0.01) Conclusion: Due to undergoing a shift in zeta potential, the modified micelles significantly enhanced cellular uptake while preserving mucus-permeating properties.

Phosphorylation of polysaccharides: A review on the synthesis and bioactivities

Polysaccharides are macromolecules obtained from a wide range of sources and are known to have diverse biological activities. The biological activities of polysaccharides depend on their structure and physicochemical properties, including water solubility, monosaccharide composition, degree of branching, molecular structure, and molecular weight. Phosphorylation is a commonly used chemical modification method that improves the physicochemical properties of native polysaccharides, thus enhancing their biological activity, or even imparting novel biological activity. Therefore, phosphorylated polysaccharides have attracted increasing attention owing to their antioxidant, antitumor, antiviral, immunomodulatory, and hepatoprotective effects. In this review, we have discussed recent advances in the phosphorylation of polysaccharides, and the methods used for phosphorylation, structural characterization, and determination of biological activities, to provide a theoretical basis for the use of polysaccharides. The structure-activity relationship of phosphorylated polysaccharides and their use in the food and pharmaceutical industries needs to be further studied.

Charge reversal self-emulsifying drug delivery systems: A comparative study among various phosphorylated surfactants

HYPOTHESIS

Phosphorylated surfactants having ethoxylate spacer arms are promising excipients for charge reversal self-emulsifying drug delivery systems (SEDDS).

EXPERIMENTS

1,2-Dipalmitoyl-sn-glycero-3-phosphatidic acid disodium salt (PA), 2-((2,3-bis(oleoyloxy)propyl)dimethylammonio)ethyl hydrogen phosphate (DOCP), nonylphenol monophosphate ester (PNPP), C12-15 alcohol 3 ethoxylate phosphate ester (PME) and polyoxyethylene (9) dioctanoyl glycerol pyrophosphate (DGPP) loaded SEDDS were developed and characterized. Zeta potential of SEDDS was measured before and after incubation with intestinal alkaline phosphatase (IAP). Phosphate release was monitored by incubation of SEDDS with isolated as well as cell-associated IAP. Primary amine content on the surface of SEDDS was determined in parallel. Cytotoxicity was evaluated on Caco-2 cells and in vitro hemolysis test was performed. Cellular uptake studies were performed by confocal scanning microscopy.

FINDINGS

SEDDS formulations exhibited a size in the range of 17 and 193 nm and a polydispersity index (PDI) ≤ 0.5. Charge reversal from negative to positive values could be achieved in case of PNPP and PME loaded SEDDS with a zeta potential changing from -13 mV to +9 mV and from -7 to +2 mV, respectively, within 6 h. Significant amounts of phosphate were released from PNPP and PME loaded SEDDS incubated with isolated IAP and from all formulations incubated with cell-associated IAP in accordance with an increase in primary amines on the surface of oily droplets. SEDDS exhibited a concentration and time-dependent cytotoxicity. PNPP and PME SEDDS displayed an increased cellular uptake.

Combined Self-Nanoemulsifying and Solid Dispersion Systems Showed Enhanced Cinnarizine Release in Hypochlorhydria/Achlorhydria Dissolution Model

The study aims to design a novel combination of drug-free solid self-nanoemulsifying drug delivery systems (S-SNEDDS) + solid dispersion (SD) to enhance cinnarizine (CN) dissolution at high pH environment caused by hypochlorhydria/achlorhydria. Drug-loaded and drug-free liquid SNEDDS were solidified using Neusilin^® US2 at 1:1 and 1:2 ratios. Various CN-SDs were prepared using freeze drying and microwave technologies. The developed SDs were characterized by differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD). In-vitro dissolution studies were conducted to evaluate CN formulations at pH 6.8. Drug-free S-SNEDDSs showed acceptable self-emulsification and powder flow properties. DSC and XRD showed that CN was successfully amorphized into SDs. The combination of drug-free S-SNEDDS + pure CN showed negligible drug dissolution due to poor CN migration into the formed nanoemulsion droplets. CN-SDs and drug-loaded S-SNEDDS showed only 4% and 23% dissolution efficiency (DE) while (drug-free S-SNEDDS + FD-SD) combination showed 880% and 160% enhancement of total drug release compared to uncombined SD and drug-loaded S-SNEDDS, respectively. (Drug-free S-SNEDDS + SD) combination offer a potential approach to overcome the negative impact of hypochlorhydria/achlorhydria on drug absorption by enhancing dissolution at elevated pH environments. In addition, the systems minimize the adverse effect of adsorbent on drug release.

Polyphosphate coatings: A promising strategy to overcome the polycation dilemma

AIM

It was the aim of this study to develop a zeta potential changing drug delivery system by decorating lipid-based nanocarriers with a polycationic cell penetrating peptide (CPP) and subsequently masking these cationic substructures with polyphosphates.

METHODS

In order to anchor the CPP poly-l-lysine (PLL) on the surface of the oily droplets of an o/w nanoemulsion, stearic acid was covalently attached to the peptide. The resulting CPP-decorated oily droplets were coated with phytic acid and tripolyphosphate. The elimination of these polyphosphates due to cleavage by alkaline phosphatase was monitored by the release of monophosphate from the surface of the nanocarriers, by the change in zeta potential and by cellular uptake studies on Caco-2 cells.

RESULTS

Polyphosphate coated PLL-decorated nanocarriers exhibited a pronounced conversion of zeta potential from -14.1 mV to +4.2 mV in case of tripolyphosphate coated nanocarriers and from -9.9 mV to -2.6 mV in case of phytic acid coated nanocarriers. The cellular uptake on Caco-2 cells of the polyphosphate coated nanocarriers was 4-fold improved compared to the control nanocarriers. Furthermore, confocal images showed that the majority of nanodroplets distributed in cytoplasm not being internalized into lysosomes.

CONCLUSION

Polyphosphate coating of CPP-decorated nanocarriers seems to be a promising and simple strategy to overcome the polycation dilemma.

Development and In Vitro Evaluation of Stearic Acid Phosphotyrosine Amide as New Excipient for Zeta Potential Changing Self-Emulsifying Drug Delivery Systems

PURPOSE

Development of zeta potential changing SEDDS containing newly synthesized derivative stearic acid phosphotyrosine amide.

METHODS

Stearoyl chloride was conjugated with phosphotyrosine, which is substrate for the brush border enzyme intestinal alkaline phosphate. The synthesized derivative was implemented in different SEDDS formulations and the zeta potential changing properties and the concluding mucus diffusion abilities were evaluated.

RESULTS

Stearic acid phosphotyrosine amide was successfully synthesized and incorporated into SEDDS. A SEDDS formulation containing the new derivative showed a zeta potential of -14 mV before, and + 2 mV after enzymatic cleavage by intestinal alkaline phosphatase. Experiments on a Caco-2 monolayer demonstrated that the phosphate cannot only be cleaved by isolated enzyme, but also by enzyme, which was expressed by cells. The mucus diffusion abilities of the untreated, negatively charged SEDDS were significantly higher compared to the enzymatically cleaved, positively charged SEDDS.

CONCLUSION

The developed stearic acid phosphotyrosine represents a promising excipient for zeta potential changing SEDDS. Graphical Abstract.

Phosphorylated PEG-emulsifier: Powerful tool for development of zeta potential changing self-emulsifying drug delivery systems (SEDDS)

AIM

It was the aim of this study to synthesize a phosphorylated emulsifier possessing a PEG-linker for establishment of a potent zeta potential changing system in self-emulsifying drug delivery systems (SEDDS).

METHODS

N,N'-Bis(polyoxyethylene)oleylamine (POA) was phosphorylated utilizing pyrophosphoric acid. Successful synthesis of POA bisphosphate (POAP) was confirmed by NMR and HR CS MAS. After incorporation of 1% POAP into SEDDS (Kolliphor RH 40, Capmul PG-8, Labrafac Lipophile WL 1349, Labrafac PG; 30/20/20/30, v/v), according emulsions were incubated with intestinal alkaline phosphatase (IAP) and the zeta potential was measured. Additionally, the amount of released phosphate upon incubation with IAP or on Caco-2 cells was quantified by malachite green assay. Finally, cell viability studies on Caco-2 cells were performed and mucus permeation properties with and without IAP preincubation were assessed.

RESULTS

POAP was synthesized as brown viscous liquid with a yield of 36% and could be incorporated into SEDDS. By incubation with IAP a zeta potential shift from -15.1 to 6.5 mV was observed. A corresponding phosphate release in presence of isolated IAP as well as on Caco-2 cells was found. Assessment of the cytotoxic potential revealed no significant alteration in the safety profile of SEDDS by incorporation of POAP. Mucus permeation studies exposed a 2-fold higher permeation of fluorescein diacetate (FDA) having been embedded in SEDDS loaded with POAP in comparison to blank formulation and 3-fold higher permeability than for emulsions having been preincubated with phosphatase.

CONCLUSION

The novel phosphorylated surfactant exhibiting a PEG-linker facilitated a potent zeta potential change of SEDDS.

Recent Advancements in Using Polymers for Intestinal Mucoadhesion and Mucopenetration

Oral administration of actives is the most desired form of delivery, but the formulations need to overcome a variety of barriers including the intestinal mucus. This feature article summarizes the developments from the past 2-3 years in this context focusing on polymer-based formulations. The progress in assembling mucopenetrating nanoparticles is outlined considering coatings using noninteracting polymers as well as virus-like particles and charge-shifting particles. Next, polymers and their modification to enhance mucoadhesion are discussed, followed by providing examples of double-encapsulation systems that aim to combine mucopenetration with mucoadhesion in the same formulation. Finally, a short outlook is provided highlighting a few of the most pressing challenges to address.

Review of polysaccharide particle-based functional drug delivery

This review investigates the significant role polysaccharide particles play in functional drug delivery. The importance of these systems is due to the wide variety of polysaccharides and their natural source meaning that they can provide biocompatible and biodegradable systems with a range of both biological and chemical functionality valuable for drug delivery. This functionality includes protection and presentation of working therapeutics through avoidance of the reticuloendothelial system, stabilization of biomacromolecules and increasing the bioavailability of incorporated small molecule drugs. Transport of the therapeutic is also key to the utility of polysaccharide particles, moving drugs from the site of administration through mucosal binding and transport and using chemistry, size and receptor mediated drug targeting to specific tissues. This review also scrutinizes the methods of synthesizing and constructing functional polysaccharide particle drug delivery systems that maintain and extend the functionality of the natural polysaccharides.

Zeta potential changing self-emulsifying drug delivery systems: A promising strategy to sequentially overcome mucus and epithelial barrier

AIM

The aim of the present study was to develop zeta potential changing self-emulsifying drug delivery systems (SEDDS) via a flip-flop mechanism in order to improve their mucus permeating and cellular uptake properties.

METHODS

Phosphorylated serine-oleylamine (p-Ser-OA) conjugates were synthesized and incorporated into SEDDS at a concentration of 1% (v/v). Cytotoxic potential of p-Ser-OA and p-Ser-OA loaded SEDDS was investigated on Caco-2 cells. Phosphate release was evaluated using isolated as well as cell-associated intestinal alkaline phosphatase (AP). In parallel, change in zeta potential and amino group concentration on the surface of SEDDS was determined. Furthermore, mucus permeation and cellular uptake studies were performed.

RESULTS

p-Ser-OA was synthesized by covalent attachment of serine (Ser) to oleylamine (OA) via a carbodiimide-mediated reaction followed by phosphorylation using phosphorous pentoxide (P₂O₅) and phosphoric acid (H₃PO₄). The chemical structure of p-Ser-OA was confirmed via FT-IR, ¹H NMR, ¹³C NMR, ³¹P NMR and mass spectroscopic analysis. p-Ser-OA loaded SEDDS exhibited a droplet size and zeta potential of 46.42 ± 0.35 nm and -11.53 mV, respectively. A significant amount of phosphate was released after incubation with isolated as well as cell-associated AP within 6 h and zeta potential raised up to -2.04 mV. p-Ser-OA loaded SEDDS showed improved mucus permeation in comparison to p-Ser-OA loaded SEDDS treated with AP. Moreover, cellular uptake increased almost 2-fold after phosphate cleavage using AP.

CONCLUSION

Findings of this study show that SEDDS changing their zeta potential via a flip-flop mechanism exhibit both high mucus permeating and high cellular uptake properties.

An update on polymer-lipid hybrid systems for improving oral drug delivery

INTRODUCTION

A promising approach that has recently emerged to overcome the complex biobarriers and interrelated challenges associated with oral drug absorption is to combine the benefits of polymeric and lipid-based nanocarriers within one hybrid system. This multifaceted formulation strategy has given rise to a plethora of polymer-lipid hybrid (PLH) systems with varying nanostructures and biological activities, all of which have demonstrated the ability to improve the biopharmaceutical performance of a wide range of challenging therapeutics.

AREAS COVERED

The multitude of polymers that can be combined with lipids to exert a synergistic effect for oral drug delivery have been identified, reviewed and critically evaluated. Specific focus is attributed to preclinical studies performed within the past 5 years that have elucidated the role and mechanism of the polymer phase in altering the oral absorption of encapsulated therapeutics.

EXPERT OPINION

The potential of PLH systems has been clearly identified; however, improved understanding of the structure-activity relationship between PLH systems and oral absorption is fundamental for translating this promising delivery approach into a clinically relevant formulation. Advancing research within this field to identify optimal polymer, lipid combinations and engineering conditions for specific therapeutics are therefore encouraged.

SEDDS: A game changing approach for the oral administration of hydrophilic macromolecular drugs

Since the development of self-emulsifying drug delivery systems (SEDDS) in 1980's, they attract the attention of researchers in order to confront the challenge of poor water-solubility of orally given drugs. Within recent years, SEDDS were also discovered for oral administration of hydrophilic macromolecular drugs such as peptides, proteins, polysaccharides and pDNA. Due to hydrophobic ion pairing (HIP) with oppositely charged lipophilic auxiliary agents the resulting complexes can be incorporated in the lipophilic phase of SEDDS. Depending on the solubility of the complex in the SEDDS pre-concentrate and in the release medium drug release can be adjusted on purpose by choosing more or less lipophilic auxiliary agents in appropriate quantities for HIP. Within the oily droplets formed in the GI-tract drugs are protected towards degradation by proteases and nucleases and thiol-disulfide exchange reactions with dietary proteins. The oily droplets can be made mucoadhesive or highly mucus permeating depending on their target site. Furthermore, even their cellular uptake properties can be tuned by adjusting their zeta potential or decorating them with cell penetrating peptides. The potential of SEDDS for oral administration of hydrophilic macromolecular drugs could meanwhile be demonstrated via various in vivo studies showing a bioavailability at least in the single digit percentage range. Owing to these properties advanced SEDDS turned out to be a game changing approach for the oral administration of hydrophilic macromolecular drugs.

Self-emulsifying drug delivery system: Mucus permeation and innovative quantification technologies

Mucus is a dynamic barrier which covers and protects the underlying mucosal epithelial membrane against bacteria and foreign particles. This protection mechanism extends to include therapeutic macromolecules and nanoparticles (NPs) through trapping of these particles. Mucus is not only a physical barrier that limiting particles movements based on their sizes but it selectively binds with particles through both hydrophilic and lipophilic interactions. Therefore, nano-carriers for mucosal delivery should be designed to eliminate entrapment by the mucus barrier. For this reason, different strategies have been approached for both solid nano-carriers and liquid core nano-carriers to synthesise muco-diffusive nano-carrier. Among these nano-strategies, Self-Emulsifying Drug Delivery System (SEDDS) was recognised as very promising nano-carrier for mucus delivery. The system was introduced to enhance the dissolution and bioavailability of orally administered insoluble drugs. SEDDS has shown high stability against intestinal enzymatic activity and more importantly, relatively rapid permeation characteristics across mucus barrier. The high diffusivity of SEDDS has been tested using various in vitro measurement techniques including both bulk and individual measurement of droplets diffusion within mucus. The selection and processing of an optimum in vitro technique is of great importance to avoid misinterpretation of the diffusivity of SEDDS through mucus barrier. In conclusion, SEDDS is a system with high capacity to diffuse through intestinal mucus even though this system has not been studied to the same extent as solid nano-carriers.

Lipids and polymers in pharmaceutical technology: Lifelong companions

In pharmaceutical technology, lipids and polymers are considered pillar excipients for the fabrication of most dosage forms, irrespective of the administration route. They play various roles ranging from support vehicles to release rate modifiers, stabilizers, solubilizers, permeation enhancers and transfection agents. Focusing on selected applications, which were discussed at the Annual Scientific Meeting of the Gattefossé Foundation 2018, this manuscript recapitulates the fundamental roles of these two important classes of excipients, either employed alone or in combination, and provides insight on their functional properties in various types of drug formulations. Emphasis is placed on oral formulations for the administration of active pharmaceutical ingredients with low aqueous solubilities or poor permeation properties. Additionally, this review article covers the use of lipids and polymers in the design of colloidal injectable delivery systems, and as substrates in additive manufacturing technologies for the production of tailor-made dosage forms.

Strategies to overcome the polycation dilemma in drug delivery

Because of polycationic auxiliary agents such as chitosan, polyethyleneimine and cell penetrating peptides as well as cationic lipids assembling to polycationic systems, drug carriers can tightly interact with cell membranes exhibiting a high-density anionic charge. Because of these interactions the cell membrane is depolarized and becomes vulnerable to various uptake mechanisms. On their way to the target site, however, the polycationic character of all these drug carriers is eliminated by polyanionic macromolecules such as mucus glycoproteins, serum proteins, proteoglycans of the extracellular matrix (ECM) and polyanionic surface substructures of non-target cells such as red blood cells. Strategies to overcome this polycation dilemma are focusing on a pH-, redox- or enzyme-triggered charge conversion at the target site. The pH-triggered systems are making use of a slight acidic environment at the target site such as in case of solid tumors, inflammatory tissue and ischemic tissue. Due to a pH shift from 7.2 to slightly acidic mainly amino substructures of polymeric excipients are protonated or shielding groups such as 2,3 dimethylmaleic acid are cleaved off unleashing the underlying cationic character. Redox-triggered systems are utilizing disulfide linkages to bulky side chains such as PEGs masking the polycationic character. Under mild reducing conditions such as in the tumor microenvironment these disulfide bonds are cleaved. Enzyme-triggered systems are targeting enzymes such as alkaline phosphatase, matrix metalloproteinases or hyaluronidase in order to eliminate anionic moieties via enzymatic cleavage resulting in a charge conversion from negative to positive. Within this review an overview about the pros and cons of these systems is provided.

Selective permeability of mucus barriers

Mucus is a hydrogel that exhibits complex selective permeability, permitting the passage of some particles while restricting the passage of other particles including important therapeutics. In this review, we discuss biochemical mechanisms underlying mucus penetration and mucus binding, emphasizing the importance of steric, electrostatic, and hydrophobic interactions. We discuss emerging techniques for engineering nanoparticle surface chemistries for mucus penetration as well as recent advances in tuning mucus interactions with small molecule, peptide, or protein therapeutics. Finally, we highlight recent work suggesting that mucus permeability can serve as a biomarker for disease and physiological states such as pregnancy.

In situ monitoring of the structural change of microemulsions in simulated gastrointestinal conditions by SAXS and FRET

Microemulsions are promising drug delivery systems for the oral administration of poorly water-soluble drugs. However, the evolution of microemulsions in the gastrointestinal tract is still poorly characterized, especially the structural change of microemulsions under the effect of lipase and mucus. To better understand the fate of microemulsions in the gastrointestinal tract, we applied small-angle X-ray scattering (SAXS) and fluorescence resonance energy transfer (FRET) to monitor the structural change of microemulsions under the effect of lipolysis and mucus. First, the effect of lipolysis on microemulsions was studied by SAXS, which found the generation of liquid crystalline phases. Meanwhile, FRET spectra indicated micelles with smaller particle sizes were generated during lipolysis, which could be affected by CaCl2, bile salts and lecithin. Then, the effect of mucus on the structural change of lipolysed microemulsions was studied. The results of SAXS and FRET indicated that the liquid crystalline phases disappeared, and more micelles were generated. In summary, we studied the structural change of microemulsions in simulated gastrointestinal conditions by SAXS and FRET, and successfully monitored the appearance and disappearance of the liquid crystalline phases and micelles.

Pharmaceutical Dispersion Techniques for Dissolution and Bioavailability Enhancement of Poorly Water-Soluble Drugs

Over the past decades, a large number of drugs as well as drug candidates with poor dissolution characteristics have been witnessed, which invokes great interest in enabling formulation of these active ingredients. Poorly water-soluble drugs, especially biopharmaceutical classification system (BCS) II ones, are preferably designed as oral dosage forms if the dissolution limit can be broken through. Minimizing a drug’s size is an effective means to increase its dissolution and hence the bioavailability, which can be achieved by specialized dispersion techniques. This article reviews the most commonly used dispersion techniques for pharmaceutical processing that can practically enhance the dissolution and bioavailability of poorly water-soluble drugs. Major interests focus on solid dispersion, lipid-based dispersion (nanoencapsulation), and liquisolid dispersion (drug solubilized in a non-volatile solvent and dispersed in suitable solid excipients for tableting or capsulizing), covering the formulation development, preparative technique and potential applications for oral drug delivery. Otherwise, some other techniques that can increase the dispersibility of a drug such as co-precipitation, concomitant crystallization and inclusion complexation are also discussed. Various dispersion techniques provide a productive platform for addressing the formulation challenge of poorly water-soluble drugs. Solid dispersion and liquisolid dispersion are most likely to be successful in developing oral dosage forms. Lipid-based dispersion represents a promising approach to surmounting the bioavailability of low-permeable drugs, though the technique needs to traverse the obstacle from liquid to solid transformation. Novel dispersion techniques are highly encouraged to develop for formulation of poorly water-soluble drugs.

Surface phosphorylation of nanoparticles by hexokinase: A powerful tool for cellular uptake improvement

The aim of the study was to develop zeta potential changing nanoparticles (NPs) via surface phosphorylation in order to improve their uptake by epithelial cells. Polymeric NPs were formed via in situ gelation between chitosan (CS) and chondroitin sulphate (ChS). Phosphorylation of these NPs was carried out by using hexokinase. The resulting phosphorylated NPs (p-NPs) were characterized in respect of their size and zeta potential. Phosphate release was quantified by incubating the particles with isolated as well as cell-associated intestinal alkaline phosphatase (AP). In parallel, resulting change in zeta potential was monitored. In-vitro mucus permeation of these particles was evaluated on porcine intestinal mucus. Furthermore, toxicity and cellular uptake studies were performed on Caco-2 cells. p-NPs exhibited a mean size of 412 ± 3.24 nm and a zeta potential of -12.4 mV. When these p-NPs were incubated with isolated as well as cell-associated AP, a significant amount of phosphate was released within 4 h and zeta potential raised up to -1.2 mV. p-NPs showed improved mucus permeation in comparison to unmodified NPs. Due to de-phosphorylation by AP, cellular uptake of p-NPs increased almost 2-fold. Moreover, particles displayed no toxicity. Findings of this study show that zeta potential changing p-NPs provide effective mucus permeation and enhanced cellular uptake.