Analytical method development and comparability study for AmBisome® and generic Amphotericin B liposomal products

Paving the way for affordable and equitable liposomal amphotericin B access worldwide

Amphotericin B has long been crucial for treating many serious infectious diseases, such as invasive fungal infections and visceral leishmaniasis, particularly for patients who are immunocompromised, including those with advanced HIV infection. The conventional amphotericin B deoxycholate formulation has largely been replaced in high-income countries with liposomal amphotericin B (LAmB), which has many advantages, including lower rates of adverse events, such as nephrotoxicity and anaemia. Despite an evident need for LAmB in low-income and middle-income countries, where mortality from invasive fungal infections is still substantial, many low-income and middle-income countries still often use the amphotericin B deoxycholate formulation because of a small number of generic formulations and the high price of the originator LAmB. The pricing of LAmB is also highly variable between countries. Overcoming supply barriers through the availability of additional quality-assured, generic formulations of LAmB at accessible prices would substantially facilitate equitable access and have a substantial effect on mortality attributable to deadly fungal infections.

QbD Enabled Development and Evaluation of Pazopanib Loaded Nanoliposomes for PDAC Treatment

Pancreatic ductal adenocarcinoma (PDAC) is one of the highly fatal types of cancer with high mortality/incidence. Considering the crucial role of vascular endothelial growth factor (VEGF) in PDAC progression, its inhibition can be a viable strategy for the treatment. Pazopanib, a second-generation VEGF inhibitor, is approved for the treatment of various oncological conditions. However, due to associated limitations like low oral bioavailability (14-39%), high inter/intra-subject variability, stability issues, etc., high doses (800 mg) are required, which further lead to non-specific toxicities and also contribute toward cancer resistance. Thus, to overcome these challenges, pazopanib-loaded PEGylated nanoliposomes were developed and evaluated against pancreatic cancer cell lines. The nanoliposomes were prepared by thin-film hydration method, followed by characterization and stability studies. This QbD-enabled process design successfully led to the development of a suitable pazopanib liposomal formulation with desirable properties. The % entrapment of PZP-loaded non-PEGylated and PEGylated nanoliposomes was found to be 75.2% and 84.9%, respectively, whereas their particle size was found to be 129.7 nm and 182.0 nm, respectively. The developed liposomal formulations exhibited a prolonged release and showed desirable physicochemical properties. Furthermore, these liposomal formulations were also assessed for in vitro cell lines, such as cell cytotoxicity assay and cell uptake. These studies confirm the effectiveness of developed liposomal formulations against pancreatic cancer cell lines. The outcomes of this work provide encouraging results and a way forward to thoroughly investigate its potential for PDAC treatment.

AmBisome® Formulations for Pediatrics: Stability, Cytotoxicity, and Cost-Effectiveness Studies

Liposomal amphotericin B (Ambisome®) is the gold standard for the treatment and prevention of fungal infections both in the adult and pediatric populations. The lyophilized dosage form has to be reconstituted and diluted by hospital staff, but its management can be challenging due to the spontaneous tendency of amphotericin B to form aggregates with different biological activity. In this study, the colloidal stability of the liposomes and the chemical stability of amphotericin B were investigated over time at storage conditions. Three liposomal formulations of amphotericin B at 4.0 mg/mL, 2.0 mg/mL, and 0.2 mg/mL were prepared and assayed for changes regarding the dimensional distribution, zeta potential, drug aggregation state, and onset of by-products. Our analyses highlighted that the most diluted formulation, kept at room temperature, showed the greatest changes in the aggregation state of the drug and accordingly the highest cytotoxicity. These findings are clinically relevant since the lower dosages are addressed to the more vulnerable patients. Therefore, the centralization of the dilution of AmBisome® at the pharmacy is of fundamental importance for assuring patient safety, and at the same time for reducing medication waste, as we demonstrated using the cost-saving analysis of drug expense per therapy carried out at the G. Gaslini children hospital.

Design of Protease-Responsive Antifungal Liposomal Formulation Decorated with a Lipid-Modified Chitin-Binding Domain

Candida albicans is a prevalent fungal pathogen that displays antibiotic resistance. The polyene antifungal amphotericin B (AmB) has been the gold standard because of its broad antifungal spectra, and its liposomal formulation, AmBisome, has been used widely and clinically in treating fungal infections. Herein, we explored enhancing the antifungal activity of AmBisome by integrating a small chitin-binding domain (LysM) of chitinase A derived from Pteris ryukyuensis. LysM conjugated with a lipid (LysM-lipid) was initially prepared through microbial transglutaminase (MTG)-mediated peptide tag-specific conjugation of LysM with a lipid-peptide substrate. The AmBisome formulation modified with LysM-lipid conjugates had a size distribution that was comparable to the native liposomes but an increased zeta potential, indicating that LysM-lipid conjugates were anchored to AmBisome. LysM-lipid-modified AmBisome exhibited long-term stability at 4 °C while retaining the capacity to bind chitin. Nevertheless, the antifungal efficacy of LysM-lipid-modified AmBisome against C. albicans was modest. We then redesigned a new LysM-lipid conjugate by introducing a peptide linker containing a thrombin digestion (TD) site at the C-terminus of LysM (LysM-TD linker-lipid), thereby facilitating the liberation of the LysM domain from AmBisome upon the addition of thrombin. This new AmBisome formulation anchored with LysM-TD linker-lipid exhibited superior performance in suppressing C. albicans growth in the presence of thrombin compared with the LysM-lipid formulation. These results provide a platform to design stimuli-responsive AmBisome formulations that respond to external environments and thus advance the treatment of pathogenic fungi infections.

Lipid-Based Nanotechnology: Liposome

Over the past several decades, liposomes have been extensively developed and used for various clinical applications such as in pharmaceutical, cosmetic, and dietetic fields, due to its versatility, biocompatibility, and biodegradability, as well as the ability to enhance the therapeutic index of free drugs. However, some challenges remain unsolved, including liposome premature leakage, manufacturing irreproducibility, and limited translation success. This article reviews various aspects of liposomes, including its advantages, major compositions, and common preparation techniques, and discusses present U.S. FDA-approved, clinical, and preclinical liposomal nanotherapeutics for treating and preventing a variety of human diseases. In addition, we summarize the significance of and challenges in liposome-enabled nanotherapeutic development and hope it provides the fundamental knowledge and concepts about liposomes and their applications and contributions in contemporary pharmaceutical advancement.

One Platform Comparison of Polymeric and Lipidic Nanoparticles for the Delivery of Amphotericin B

Amphotericin B (AmB) is a membrane-acting antibiotic used for the treatment of fungal and protozoal infections. AmB exists in various molecular forms, i.e., monomeric, super-aggregated, and oligomeric forms, where oligomeric forms are highly toxic because of their relative affinity toward cholesterol present over human cell membrane. Hence, the objective of our research work was to study the aggregation state of AmB in two different nanoformulations, i.e., solid lipid nanoparticles (SLNs) and zein-based nanoparticles (PNPs), with the aim of enhancing the fraction of less toxic form of AmB, and a comparative study was performed. The zein and glyceryl monostearate can intercalate the polyenic domain of AmB and thereby hinder the hydrophobic attractions between the AmB molecules, which allows their existence in monomeric forms. The particle size of AmB-SLNs and AmB-PNPs were 378.90 ± 9.50 nm and 184.90 ± 6.00 nm, while zeta potential was -34.97 ± 0.51 mV and +28.93 ± 2.29 mV, respectively. In vitro release studies showed more controlled release of AmB from PNPs (52.48 ± 1.07%) as compared to SLNs (86.33 ± 0.93%). The predominant aggregation state of AmB in both formulations was determined by UV-visible and circular dichroism spectrophotometry, where a higher degree of monomerization of AmB was reported in AmB-SLNs as compared to AmB-PNPs. Toxicity of the nanoformulations was evaluated through hemolysis test, where the results suggested that AmB-SLNs and AmB-PNPs were less hemolytic as compared to pure AmB. The nanoformulations demonstrated the predominant monomeric form of AmB, which may offer higher selectivity index toward microbial membrane.

Exploring novel and fast stability or sameness evaluation tool for different categories of injectable formulations

The establishment of drug product stability and sameness is the heart of generic formulation development. For regulatory filing, various instrumental methods are used on a case basis to establish the generic and innovator product sameness in multiple aspects. Here in the present study, we explored the applicability of the Time-correlated single photon counting (TCS-PC) technique as a fast, reliable, and nondestructive method for establishing the sameness of three different categories of injectable formulations, namely, Amphotericin B liposome for injection, enoxaparin injection, and iron sucrose injection. All three category formulations were evaluated in their native and artificially induced post degradation state to identify the discrimination power of the used instrumental techniques. The degradation of materials were confirmed by high performance liquid chromatography (HPLC). Based on the product category, pre and post-degradation samples were evaluated by selective instrumental methods like differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), fluorescence spectroscopy, particle size analysis by dynamic light scattering (DLS), small angle X-ray scattering (SAXS), Raman spectroscopy, inductively coupled plasma optical-emission spectrometry (ICP-OES) and circular dichroism study. All pre and post-degradation samples were further analyzed by TCS-PC. We observed that, TCS-PC can identify the differences between the initial and post degradation samples in very less time with promising discrimination power across the different injectable formulation types. Thus TCS-PC can be used as a fast and promising stability or sameness evaluation tool for different injectable drug products.

Amphotericin B Pharmacokinetics: Inter-strain Differences in Rats Following Intravenous Administration of the Most Commonly Marketed Formulations of the Drug

Background

Amphotericin B (AmB) is the first-line drug to treat invasive fungal infections. However, its delivery to the body and clinical use faces many challenges because of its poor solubility, poor pharmacokinetics, and severe nephrotoxicity.

Objectives

Due to the necessity for designing safer and more effective nanocarriers for AmB and the importance of preclinical pharmacokinetic studies in evaluating these novel drug delivery systems, the present study was framed to explore the influence of rat strain on the pharmacokinetic profile of this drug.

Methods

Twenty-four Wistar and Sprague-Dawley (SD) rats were intravenously injected with 1 mg/kg AmB as Fungizone or AmBisome, which are the two most commonly marketed formulations of the drug. Blood samples were collected before and at regular intervals up to 24 h after administration. Drug concentration was analyzed by a validated HPLC method, and pharmacokinetic parameters were determined by the non-compartmental method.

Results

Irrespective of the type of formulation, the AUC0-t and AUC0-∞ values were significantly higher (P < 0.001), and Cl as an important PK parameter was markedly lower (P < 0.001) in SD rats compared to the Wistar strain. For Fungizone, the mean Cl values in SD and Wistar rats were 206.90 and 462.95 mL/h/kg (P < 0.001), respectively. The apparent volume of distribution (Vss) was also lower in SD rats compared to Wistar; however, for AmBisome, the difference in Vss was not statistically significant. Our further investigation suggested that the higher amount of total protein in the SD strain may justify the higher plasma concentrations and lower Cl and Vss of amphotericin B in this strain compared to the Wistar strain.

Conclusions

Overall, following intravenous administration of AmB, there were significant differences in the pharmacokinetic parameters of the drug between two rat strains for both formulations. The obtained data is important for correctly interpreting experimental data from different research groups.

Liposomal Amphotericin B for Treatment of Leishmaniasis: From the Identification of Critical Physicochemical Attributes to the Design of Effective Topical and Oral Formulations

The liposomal amphotericin B (AmB) formulation, AmBisome^®, still represents the best therapeutic option for cutaneous and visceral leishmaniasis. However, its clinical efficacy depends on the patient's immunological status, the clinical manifestation and the endemic region. Moreover, the need for parenteral administration, its side effects and high cost significantly limit its use in developing countries. This review reports the progress achieved thus far toward the understanding of the mechanism responsible for the reduced toxicity of liposomal AmB formulations and the factors that influence their efficacy against leishmaniasis. It also presents the recent advances in the development of more effective liposomal AmB formulations, including topical and oral liposome formulations. The critical role of the AmB aggregation state and release rate in the reduction of drug toxicity and in the drug efficacy by non-invasive routes is emphasized. This paper is expected to guide future research and development of innovative liposomal formulations of AmB.

The Designing of a Gel Formulation with Chitosan Polymer Using Liposomes as Nanocarriers of Amphotericin B for a Non-invasive Treatment Model of Cutaneous Leishmaniasis

PURPOSE

Leishmaniasis is a disease caused by different Leishmania spp., which are transmitted to humans by a bite of infected female sand flies. Cutaneous leishmaniasis (CL, oriental sore), visceral leishmaniasis (VL), and mucocutaneous leishmaniasis (MCL) are three main clinical forms, however, only CL and VL are seen in Turkey. Cutaneous leishmaniasis is characterized by skin lesion(s) and is one of the most important vector-borne diseases in Turkey with over 2000 cases reported annually in 40 out of 81 provinces. The treatment is usually made invasively and painfully by intralesional injection of pentavalent antimony compounds. Non-invasive and innovative treatment methods are needed as aimed in this study.

METHODS

In the present study, one of the classical antileishmanial drugs, amphotericin B (AmB), encapsulated in liposomes was evaluated using non-invasive design based on chitosan, which is a nontoxic, biocompatible and biodegradable polymer. To avoid the invasive effect of conventional intralesional needle application, the drug was encapsulated in liposomes and incorporated into a chitosan gel for applying topically on the skin lesion. The efficacy of encapsulation of amphotericin B into liposomes and the drug release from liposomes were studied. The chitosan gel was evaluated for viscosity, flowability, appearance and pH. The efficacy of the drug embedded into chitosan gel, liposomal AmB alone and chitosan gel alone in four different concentrations was also tested using Leishmania spp. promastigotes in vitro.

RESULTS

The findings have shown that AmB was encapsulated into the liposomes with high efficiency (86.6%) and long-term physical and chemical stability. Therefore, designed liposomal formulation was suitable for sustained release. The appearance of the drug-embedded chitosan gel was transparent and appropriate. Chitosan gels showed non- Newtonian behavior and plastic flow. The liposomal AmB also showed higher efficacy with no parasites in all concentrations while drug embedded into chitosan gel and chitosan gel alone were effective in two higher concentrations. The lower efficacy of the drug-embedded chitosan gel in 24 h in in-vitro study was probably due to slow release of the drug.

CONCLUSION

The gel design created in this study will provide ease of use for the lesions of CL patients that do not have a specific number, size, and shape. Follow-up studies by the ex-vivo macrophage infection model with Leishmania intracellular amastigote forms and Leishmania-infected animal models are needed to understand the present design's efficacy better.

Biodistribution, pharmacokinetics and excretion studies of intravenously injected nanoparticles and extracellular vesicles: Possibilities and challenges

There is a large interest in developing nanoparticles and extracellular vesicles for delivery of therapeutics or imaging agents. Regulatory approval of such products requires knowledge about their biodistribution, metabolism and excretion. We here discuss possibilities and challenges of methods used for such studies, which most often are performed after labelling with radioactive isotopes or fluorescent molecules. It is important to evaluate if the labelled and unlabeled products can be expected to behave similarly in the body. Furthermore, one needs to critically consider whether the labels are still associated with the product at the time of analyses. We discuss advantages and disadvantages of different imaging modalities such as PET, SPECT, MRI, CT, ultrasound and optical imaging for whole-body biodistribution, and describe how to estimate the amount of labelled product in harvested organs and tissue. Microscopy of cells and tissues and various mass spectrometry methods are also discussed in this review.

A Review of Liposomes as a Drug Delivery System: Current Status of Approved Products, Regulatory Environments, and Future Perspectives

Liposomes have been considered promising and versatile drug vesicles. Compared with traditional drug delivery systems, liposomes exhibit better properties, including site-targeting, sustained or controlled release, protection of drugs from degradation and clearance, superior therapeutic effects, and lower toxic side effects. Given these merits, several liposomal drug products have been successfully approved and used in clinics over the last couple of decades. In this review, the liposomal drug products approved by the U.S. Food and Drug Administration (FDA) and European Medicines Agency (EMA) are discussed. Based on the published approval package in the FDA and European public assessment report (EPAR) in EMA, the critical chemistry information and mature pharmaceutical technologies applied in the marketed liposomal products, including the lipid excipient, manufacturing methods, nanosizing technique, drug loading methods, as well as critical quality attributions (CQAs) of products, are introduced. Additionally, the current regulatory guidance and future perspectives related to liposomal products are summarized. This knowledge can be used for research and development of the liposomal drug candidates under various pipelines, including the laboratory bench, pilot plant, and commercial manufacturing.

Amphotericin B nanohydrogel ocular formulation using alkyl glyceryl hyaluronic acid: Formulation, characterization, and in vitro evaluation

The present study focused on the development of an amphotericin B (AmB) nanoformulation for ophthalmic applications. Accordingly, AmB nanohydrogels (AHA/AmB) using alkyl glyceryl hyaluronic acid (Hyalorepair®, AHA), a hydrophobized hyaluronic acid, were prepared by employing the dialysis method, followed by assessments of physical properties, drug efficacy, and toxicity. In the AHA/AmB formulation, AmB existed in a self-aggregated and amorphous state in the hydrophobic environment of the AHA moiety. AHA/AmB was shown in vitro to interact with mucin, which is known to be expressed in the corneal epithelium and was expected to improve its corneal retention. Compared with the conventional AmB formulation, amphotericin B sodium deoxycholate, AHA/AmB had the same in vitro antifungal activity but significantly lower in vitro toxicity. These findings indicate that nanohydrogels prepared with AHA possess high fungal selectivity and serve as a promising system for ophthalmic AmB delivery.