Sustained release of insulin-like growth factor-1 from poly(lactide-co-glycolide) microspheres improves osseointegration of dental implants in type 2 diabetic rats

The treatment efficacy of bone tissue engineering strategy for repairing segmental bone defects under diabetic condition

Background

Diabetes mellitus is a systematic disease which exert detrimental effect on bone tissue. The repair and reconstruction of bone defects in diabetic patients still remain a major clinical challenge. This study aims to investigate the potential of bone tissue engineering approach to improve bone regeneration under diabetic condition.

Methods

In the present study, decalcified bone matrix (DBM) scaffolds were seeded with allogenic fetal bone marrow-derived mesenchymal stem cells (BMSCs) and cultured in osteogenic induction medium to fabricate BMSC/DBM constructs. Then the BMSC/DBM constructs were implanted in both subcutaneous pouches and large femoral bone defects in diabetic (BMSC/DBM in DM group) and non-diabetic rats (BMSC/DBM in non-DM group), cell-free DBM scaffolds were implanted in diabetic rats to serve as the control group (DBM in DM group). X-ray, micro-CT and histological analyses were carried out to evaluate the bone regenerative potential of BMSC/DBM constructs under diabetic condition.

Results

In the rat subcutaneous implantation model, quantitative micro-CT analysis demonstrated that BMSC/DBM in DM group showed impaired bone regeneration activity compared with the BMSC/DBM in non-DM group (bone volume: 46 ± 4.4 mm3 vs 58.9 ± 7.15 mm3, *p < 0.05). In the rat femoral defect model, X-ray examination demonstrated that bone union was delayed in BMSC/DBM in DM group compared with BMSC/DBM in non-DM group. However, quantitative micro-CT analysis showed that after 6 months of implantation, there was no significant difference in bone volume and bone density between the BMSC/DBM in DM group (199 ± 63 mm3 and 593 ± 65 mg HA/ccm) and the BMSC/DBM in non-DM group (211 ± 39 mm3 and 608 ± 53 mg HA/ccm). Our data suggested that BMSC/DBM constructs could repair large bone defects in diabetic rats, but with delayed healing process compared with non-diabetic rats.

Conclusion

Our study suggest that biomaterial sacffolds seeded with allogenic fetal BMSCs represent a promising strategy to induce and improve bone regeneration under diabetic condition.

Recent progress in bone-repair strategies in diabetic conditions

Bone regeneration following trauma, tumor resection, infection, or congenital disease is challenging. Diabetes mellitus (DM) is a metabolic disease characterized by hyperglycemia. It can result in complications affecting multiple systems including the musculoskeletal system. The increased number of diabetes-related fractures poses a great challenge to clinical specialties, particularly orthopedics and dentistry. Various pathological factors underlying DM may directly impair the process of bone regeneration, leading to delayed or even non-union of fractures. This review summarizes the mechanisms by which DM hampers bone regeneration, including immune abnormalities, inflammation, reactive oxygen species (ROS) accumulation, vascular system damage, insulin/insulin-like growth factor (IGF) deficiency, hyperglycemia, and the production of advanced glycation end products (AGEs). Based on published data, it also summarizes bone repair strategies in diabetic conditions, which include immune regulation, inhibition of inflammation, reduction of oxidative stress, promotion of angiogenesis, restoration of stem cell mobilization, and promotion of osteogenic differentiation, in addition to the challenges and future prospects of such approaches.

Effect of Anti-Diabetic Medications on Dental Implants: A Scoping Review of Animal Studies and Their Relevance to Humans

Animal studies have ascertained that hyperglycemia adversely affects bone metabolism and dental implant osseointegration. However, diabetic patients show low occurrence of unfavorable hard or soft peri-implant tissue changes, differences that are possibly due to treatment with anti-diabetic medications. This scoping review aimed to systematically examine the effects of these drugs on implant outcomes and explore the predictive modality of animal studies for clinical practice according to type 1 diabetes mellitus (T1DM) and type 2 diabetes mellitus (T2DM). Three electronic databases (MEDLINE, EBSCOHost, and Cochrane) were searched according to the PRISMA-ScR standards for studies on diabetic animals that received titanium implants and anti-diabetic treatments. Risk assessment was performed using the SYRCLE Risk-of-Bias (RoB) tool. Twenty-one papers were included, encompassing six types of medications. Fifteen studies were on T1DM animals, and only six involved T2DM models. T1DM animals were treated with non-insulin drugs in four investigations, while insulin was utilized in 11 other studies. In T2DM experiments, five administered non-insulin drugs, and only one applied locally delivered insulin. Only insulin in T1DM studies produced a positive influence on bone-implant contact (BIC), bone mineral content, and removal torque values. Inappropriate drug selection, inadequate glycemic control, and high RoB depict a mismatch between the research focus and the translational rationale to clinical practice. There remains a knowledge gap regarding T2DM investigations due to the lack of studies. More data are needed concerning intraoral implants and the performance of osseointegrated implants in patients with a later onset of diabetes. Future research should reflect the pathophysiology and treatment of each type of diabetes to ensure clinical applicability.

ALX1-transcribed LncRNA AC132217.4 promotes osteogenesis and bone healing via IGF-AKT signaling in mesenchymal stem cells

The osteogenic potential of bone marrow mesenchymal stem cells (BMSCs) is critical for bone formation and regeneration. A high non-/delayed-union rate of fracture healing still occurs in specific populations, implying an urgent need to discover novel targets for promoting osteogenesis and bone regeneration. Long non-coding (lnc)RNAs are emerging regulators of multiple physiological processes, including osteogenesis. Based on differential expression analysis of RNA sequencing data, we found that lncRNA AC132217.4, a 3'UTR-overlapping lncRNA of insulin growth factor 2 (IGF2), was highly induced during osteogenic differentiation of BMSCs. Afterward, both gain-of-function and loss-of-function experiments proved that AC132217.4 promotes osteoblast development from BMSCs. As for its molecular mechanism, we found that AC132217.4 binds with IGF2 mRNA to regulate its expression and downstream AKT activation to control osteoblast maturation and function. Furthermore, we identified two splicing factors, splicing component 35 KDa (SC35) and heterogeneous nuclear ribonucleoprotein A1 (HNRNPA1), which regulate the biogenesis of AC132217.4 at the post-transcriptional level. We also identified a transcription factor, ALX1, which regulates AC132217.7 expression at the transcriptional level to promote osteogenesis. Importantly, in-vivo over-expression of AC132217.4 essentially promotes the bone healing process in a murine tibial drill-hole model. Our study demonstrates that lncRNA AC132217.4 is a novel anabolic regulator of BMSC osteogenesis and could be a plausible therapeutic target for improving bone regeneration.

Engineered Chimeric Peptides with IGF-1 and Titanium-Binding Functions to Enhance Osteogenic Differentiation In Vitro under T2DM Condition

Due to the complexity of the biomolecules and titanium (Ti) combination, it is a challenge to modify the implant surface with biological cytokines. The study proposed a new method for immobilizing cytokines on implant surface to solve the problem of low osseointegration under type 2 diabetes mellitus (T2DM) condition. This new modified protein that connected Ti-binding artificial aptamer minTBP-1 with Insulin-like growth factor I (IGF-I), had a special strong affinity with Ti and a therapeutic effect on diabetic bone loss. According to the copies of minTBP-1, three proteins were prepared, namely minTBP-1-IGF-1, 2minTBP-1-IGF-1 and 3minTBP-1-IGF-1. Compared with the other modified proteins, 3minTBP-1-IGF-1 adsorbed most on the Ti surface. Additionally, this biointerface demonstrated the most uniform state and the strongest hydrophilicity. In vitro results showed that the 3minTBP-1-IGF-1 significantly increased the adhesion, proliferation, and mineralization activity of osteoblasts under T2DM conditions when compared with the control group and the other modified IGF-1s groups. Real-time PCR assay results confirmed that 3minTBP-1-IGF-1 could effectively promote the expression of osteogenic genes, that is, ALP, BMP-2, OCN, OPG, and Runx2. All these data indicated that the 3minTBP-1-IGF-1 had the most efficacious effect in promoting osteoblasts osteogenesis in diabetic conditions, and may be a promising option for further clinical use.

Glimepiride Loaded Poly(D,L-lactide-co-glycolide) Microspheres Improve Osseointegration of Dental Implants in Type 2 Diabetic Rats

The patients with type 2 diabetes mellitus (T2DM) have high dental implant failure frequency. This study explores the function of glimepiride local delivery on dental implant osseointegration in diabetes animal. Glimepiride loaded PLGA microspheres were loaded on the surface of the dental implant, and transplanted into ten Goto-Kakizaki (GK) rats. Blood sugar level and Implant Stability Quotient (ISQ) were measured every week after surgery. Histological, osseointegration rate and bone-implant contact (BIC) rate analysis were performed to evaluate dental osseointegration. The results showed that Glimepiride loaded Poly-lactide-co-glycolide (PLGA) microspheres have sustained-release curve. The glimepiride group exhibited greater ISQ than the control group. The BIC rate of the control and glimepiride group was 44.60%±1.95% and 59.80%±1.79%, respectively. This study demonstrated that the glimepiride group has a significantly greater osseointegration rate than that of the control group. Thus, Glimepiride could provide an alternative drug release microspheres for enhance the dental implant osseointegration in diabetes patients.

Evaluating the osteogenic potential of insulin-like growth factor-1 microspheres on osteoblastic activity around dental implants in patients with type 2 diabetes mellitus using bone scintigraphy: A split-mouth randomized controlled trial

STATEMENT OF PROBLEM

Dental implants are susceptible to early failure when placed in patients diagnosed with type 2 diabetes mellitus. The osteoinductive potential of insulin-like growth factor-1 (IGF-1) has been widely investigated in animals with type 2 diabetes mellitus, but studies investigating the osteoinductive potential of IGF-1 around dental implants in patients diagnosed with type 2 diabetes mellitus are lacking.

PURPOSE

This randomized controlled trial was conducted to assess the osteogenic efficacy of poly(lactide-co-glycolide)- (PLGA) encapsulated IGF-1 microspheres around dental implants placed in patients diagnosed with type 2 diabetes mellitus.

MATERIAL AND METHODS

A split-mouth, randomized controlled trial was conducted in 10 participants diagnosed with type 2 diabetes mellitus and with bilaterally missing mandibular posterior teeth. The 20 sites were randomly allotted to receive the PLGA encapsulated IGF-1 or placebo microspheres followed by the placement of Ø3.8×11-mm implants. Osteoblastic activity was quantitatively assessed with bone scintigraphy scanning on the thirtieth, sixtieth, and 90th day after implant placement. The Shapiro-Wilks test was used to analyze the normality of data, followed by the independent t test to compare the experimental and placebo groups. Intragroup comparison was performed by using repeated-measures ANOVA and the post hoc Bonferroni test (α=.05).

RESULTS

Statistical analysis revealed that the mean osteoblastic activity was higher in the experimental group which received the PLGA-encapsulated IGF-1 than in the placebo group at the 30th, 60th, and 90th day after implant placement (P≤.001).

CONCLUSIONS

This randomized controlled trial indicated that the PLGA-encapsulated sustained release of IGF-1 microspheres enhanced the process of osseointegration in patients diagnosed with type 2 diabetes mellitus until the 90th day after implant placement.

A four-year prospective study of self-assembling nano-modified dental implants in patients with type 2 diabetes mellitus

Background/purpose

Dental implantation has become an efficient and important method of replacing lost teeth. However, the success rate of dental-implant treatment in diabetics is higher than patients without diabetes. The aim of this study was to prospectively evaluate long-term marginal bone loss (MBL) and the stability of a self-assembling nano-modified implant in patients with type 2 diabetes mellitus compared with a conventional implant.

Materials and methods

Twenty-five patients with type 2 diabetes were recruited for this study. Through a random selection process, one site in each patient received a conventional implant and the other site received a nano-modified implant. The implant stability quotient was measured using resonance frequency analysis (RFA), and MBL was measured using panoramic radiography from uncovering to four-year follow-up.

Results

No significant difference in implant stability quotient was found between the two groups (P > 0.05), except for the time at implant insertion (P < 0.05). MBL in the nano-modified implant group exhibited a decreasing change compared with the conventional implant group, between the uncovering and the loading stage (P < 0.05), while there was no significant difference in other stages (P > 0.05).

Conclusion

There was potentially increased implant stability and diminished MBL around the self-assembling nano-modified implant in the uncovering-loading stage of early osseointegration in patients with type 2 diabetes.

Local delivery of insulin/IGF-1 for bone regeneration: carriers, strategies, and effects

Bone defects caused by trauma, tumor resection, congenital malformation and infection are still a major challenge for clinicians. Biomimetic bone materials have attracted more and more attention in science and industry. Insulin and insulin-like growth factor-1 (IGF-1) have been increasingly recognized as an inducible factor for osteogenesis and angiogenesis. Spatiotemporal release of insulin may serve as the promising strategy. Considering the successful application of nanoparticles in drug loading, various insulin delivery systems have been developed, including (poly (lactic-co-glycolic acid), PLGA), hydroxyapatite (HA), gelatin, chitosan, alginate, and (γ-glutamic acid)/β-tricalcium phosphate, γ-PGA/β-TCP). Here, we have reviewed the progress on nanoparticles carrying insulin/IGF for bone regeneration. In addition, the key regulatory mechanism of insulin in bone regeneration is also summarized. The future application strategies and the challenges in bone regeneration are also discussed.

Customized Therapeutic Surface Coatings for Dental Implants

Dental implants are frequently used to support fixed or removable dental prostheses to replace missing teeth. The clinical success of titanium dental implants is owed to the exceptional biocompatibility and osseointegration with the bone. Therefore, the enhanced therapeutic effectiveness of dental implants had always been preferred. Several concepts for implant coating and local drug delivery had been developed during the last decades. A drug is generally released by diffusion-controlled, solvent-controlled, and chemical controlled methods. Although a range of surface modifications and coatings (antimicrobial, bioactive, therapeutic drugs) have been explored for dental implants, it is still a long way from designing sophisticated therapeutic implant surfaces to achieve the specific needs of dental patients. The present article reviews various interdisciplinary aspects of surface coatings on dental implants from the perspectives of biomaterials, coatings, drug release, and related therapeutic effects. Additionally, the various types of implant coatings, localized drug release from coatings, and how released agents influence the bone–implant surface interface characteristics are discussed. This paper also highlights several strategies for local drug delivery and their limitations in dental implant coatings as some of these concepts are yet to be applied in clinical settings due to the specific requirements of individual patients.

The Influence of Type 2 Diabetes Mellitus on the Osseointegration of Titanium Implants With Different Surface Modifications-A Histomorphometric Study in High-Fat Diet/Low-Dose Streptozotocin-Treated Rats

OBJECTIVES

Type 2 diabetes mellitus (T2DM) is a systemic disease that also compromises the bone healing capacity. In healthy individuals, surface modifications of dental implants are proven to increase bone response and implant success. The aim of this study was to clarify if the surface modifications also improve osseointegration in a setting with diabetes mellitus.

METHODS

T2DM was induced in 7 rats by a high-fat diet/low-dose streptozotocin injection. All animals received a hydroxyapatite (HA) implant, a sandblasted and acid-etched (SLA) implant, and a standard machined titanium implant for control in the tibia. After 4 weeks, thin-ground sections were produced, and the volume of new bone formation (nBV/TV) and bone-to-implant contact (nB.I/Im.I) were histomorphometrically analyzed.

RESULTS

Both surface modifications led to an increase of osseointegration compared with the machined surface implant in rats with T2DM. nBV/TV was highest in the SLA implants, whereas nB.I/Im.I was highest in the HA group. Regardless of the surface modification, a superordinate regional pattern of new bone formation over the length of the implant was observed.

CONCLUSIONS

Implants with HA coating and SLA surface modifications seem to have the potential to increase osseointegration also in T2DM rats when compared with a conventional machined surface.

Sustained Protein Release from a Core-Shell Drug Carrier System Comprised of Mesoporous Nanoparticles and an Injectable Hydrogel

The manufacture of a biocompatible carrier for controlled delivery of bioactive compounds is described. This carrier is composed of a mesoporous silica nanoparticle as core that is homogenously distributed in an injectable hydrogel. For the synthesis of nanoparticles, a one step sol-gel method is developed to produce pores with the range of 100 nm. BMP2 and Fluorescein-conjugated bovine serum albumin is used as proteinaceous agents for measuring release, and is loaded into mesoporous silica nanoparticles at the optimum conditions of 48 h incubation period using 1:10 ratio of protein to nanoparticles. The release of proteins from either mesoporous nanoparticles or hydrogel individually involves a burst release stage, however the release from the core/shell carrier designed in this study follows a zero order kinetic. In summary, this biomaterial may be favorable for delivery of bioactive compounds such as BMP2 for a range of applications including bone tissue regeneration.

Lactic acid of PLGA coating promotes angiogenesis on the interface between porous titanium and diabetic bone

The diabetes-related high failure risk for endosseous implants needs efficacious methods to improve osteointegration on the bone-implant interface (BII). Poly(lactic-co-glycolic) acid (PLGA) is widely used in tissue engineering but its effects on the BII in diabetes remain unclear. To clarify this issue, 3D-printed porous titanium implants (TI) with and without PLGA coating were fixed in the bone defects of sheep in vivo, and vascular endothelial cells (VEC) and osteoblasts were incubated on the implant surface under normal conditions (NC) and diabetic conditions (DC) in vitro. The results showed that the PLGA coating promoted angiogenesis on the BII and the osteointegration of TI in diabetic sheep. The PLGA coating attenuated the DC-induced dysfunctions of VEC but not of osteoblasts. When VEC and osteoblasts were co-cultured in DC, the PLGA coating showed protective effects on the osteoblasts. Lactic acid (LA) but not glycolic acid (GA), both of which are degradation products of PLGA, induced similar effects to those of PLGA. These results suggest that PLGA coating on TI could promote angiogenesis in diabetes by its degradation production of LA, thus indirectly improving the bone formation on BII. Furthermore, PLGA exerted its effects, at least partially, through inhibiting the pathological effects of advanced glycation end products (AGEs) on the BII. This is the first study of the effects of PLGA on angiogenesis on the BII and the first findings on the inhibitory effects of PLGA on AGEs. Our findings demonstrate that PLGA is a promising interface-modification component for fabricating implants with better angiogenesis and osteointegration on the BII under diabetic conditions. This strategy might be applicable for reducing implant failure in diabetic patients.

Immunomodulatory ECM-like Microspheres for Accelerated Bone Regeneration in Diabetes Mellitus

Bone repair and regeneration process is markedly impaired in diabetes mellitus (DM) that affects hundreds of millions of people worldwide. As a chronic inflammatory disease, DM creates a proinflammatory microenvironment in defective sites. Most of the studies on DM-associated bone regeneration, however, neglect the importance of immunomodulation under the DM condition and adopt the same approaches to normal bone healing, leading to limited bone healing. In this study, we developed a unique bioinspired injectable microsphere as an osteoimmunomodulatory biomaterial that modulates macrophages to create a prohealing microenvironment under the DM condition. The microsphere was self-assembled with heparin-modified gelatin nanofibers, and interleukin 4 (IL4) was incorporated into the nanofibrous heparin-modified gelatin microsphere (NHG-MS). IL4 has binding domains with heparin, and the binding of IL4 to heparin stabilizes this cytokine, protects it from denaturation and degradation, and subsequently prolongs its sustained release to modulate macrophage polarization. The IL4-loaded NHG-MS switched the proinflammatory M1 macrophage into a prohealing M2 phenotype, recovered the M2/M1 ratio to a normal level, efficiently resolved the inflammation, and ultimately enhanced osteoblastic differentiation and bone regeneration. The development of osteoimmunomodulatory biomaterials that harness the power of macrophages for immunomodulation, therefore, is a novel and promising strategy to enhance bone regeneration under DM condition.

The effect of hyperglycaemia on osseointegration: a review of animal models of diabetes mellitus and titanium implant placement

Patients with type 2 diabetes mellitus have a higher risk of dental and/or orthopaedic implant failure. However, the mechanism behind this phenomenon is unclear, and animal studies may prove useful in shedding light on the processes involved. This review considers the available literature on rat models of diabetes and titanium implantation.

INTRODUCTION

The process of osseointegration whereby direct contact is achieved between bone and an implant surface depends on healthy bone metabolism. Collective evidence suggests that hyperglycaemia adversely affects bone turnover and the quality of the organic matrix resulting in an overall deterioration in the quality, resilience and structure of the bone tissue. This in turn results in compromised osseointegration in patients receiving dental and orthopaedic implants. The incidence of diabetes mellitus (DM), which is a chronic metabolic disorder resulting in hyperglycaemia, is rising. Of particular significance is the rising incidence of adult onset type 2 diabetes mellitus (T2DM) in an ageing population. Understanding the effects of hyperglycaemia on osseointegration will enable clinicians to manage health outcomes for patients receiving implants. Much of our understanding of how hyperglycaemia affects osseointegration comes from animal studies.

METHODS

In this review, we critically analyse the current animal studies.

RESULTS

Our review has found that most studies used a type 1 diabetes mellitus (T1DM) rodent model and looked at a young male population of rodents. The pathophysiology of T1DM is however very different to that of T2DM and is not representative of T2DM, the incidence of which is rising in the ageing adult population. Genetically modified rats have been used to model T2DM, but none of these studies have included female rats and the metabolic changes in bone for some of these models used are not adequately characterized.

CONCLUSIONS

Therefore, the review suggests that the study population needs to be broadened to include both T1DM and T2DM models, older rats as well as young rats, and importantly animals from both sexes to reflect more accurately clinical practice.

Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair

Rapid prototyping of bone tissue engineering constructs often utilizes elevated temperatures, organic solvents and/or UV light for materials processing. These harsh conditions may prevent the incorporation of cells and therapeutic proteins in the fabrication processes. Here we developed a method for using bioprinting to produce constructs from a thermoresponsive microparticulate material based on poly(lactic-co-glycolic acid) at ambient conditions. These constructs could be engineered with yield stresses of up to 1.22 MPa and Young's moduli of up to 57.3 MPa which are within the range of properties of human cancellous bone. Further study showed that protein-releasing microspheres could be incorporated into the bioprinted constructs. The release of the model protein lysozyme from bioprinted constructs was sustainted for a period of 15 days and a high degree of protein activity could be measured up to day 9. This work suggests that bioprinting is a viable route to the production of mechanically strong constructs for bone repair under mild conditions which allow the inclusion of viable cells and active proteins.

Current Uses of Poly(lactic-co-glycolic acid) in the Dental Field: A Comprehensive Review

Poly(lactic-co-glycolic acid) or PLGA is a biodegradable polymer used in a wide range of medical applications. Specifically PLGA materials are also developed for the dental field in the form of scaffolds, films, membranes, microparticles, or nanoparticles. PLGA membranes have been studied with promising results, either alone or combined with other materials in bone healing procedures. PLGA scaffolds have been used to regenerate damaged tissues together with stem cell-based therapy. There is solid evidence that the development of PLGA microparticles and nanoparticles may be beneficial to a wide range of dental fields such as endodontic therapy, dental caries, dental surgery, dental implants, or periodontology. The aim of the current paper was to review the recent advances in PLGA materials and their potential uses in the dental field.

Immobilization of chitosan film containing semaphorin 3A onto a microarc oxidized titanium implant surface via silane reaction to improve MG63 osteogenic differentiation

Improving osseointegration of extensively used titanium (Ti) implants still remains a main theme in implantology. Recently, grafting biomolecules onto a Ti surface has attracted more attention due to their direct participation in the osseointegration process around the implant. Semaphorin 3A (Sema3A) is a new proven osteoprotection molecule and is considered to be a promising therapeutic agent in bone diseases, but how to immobilize the protein onto a Ti surface to acquire a long-term effect is poorly defined. In our study, we tried to use chitosan to wrap Sema3A (CS/Sema) and connect to the microarc oxidized Ti surface via silane glutaraldehyde coupling. The microarc oxidization could formulate porous topography on a Ti surface, and the covalently bonded coating was homogeneously covered on the ridges between the pores without significant influence on the original topography. A burst release of Sema3A was observed in the first few days in phosphate-buffered saline and could be maintained for >2 weeks. Coating in phosphate-buffered saline containing lysozyme was similar, but the release rate was much more rapid. The coating did not significantly affect cellular adhesion, viability, or cytoskeleton arrangement, but the osteogenic-related gene expression was dramatically increased and calcium deposition was also abundantly detected. In conclusion, covalent bonding of CS/Sema could strongly improve osteogenic differentiation of osteoblasts and might be applied for Ti implant surface biofunctionalization.

Gene expression profiling of peri-implant healing of PLGA-Li+ implants suggests an activated Wnt signaling pathway in vivo

Bone development and regeneration is associated with the Wnt signaling pathway that, according to literature, can be modulated by lithium ions (Li+). The aim of this study was to evaluate the gene expression profile during peri-implant healing of poly(lactic-co-glycolic acid) (PLGA) implants with incorporated Li+, while PLGA without Li+ was used as control, and a special attention was then paid to the Wnt signaling pathway. The implants were inserted in rat tibia for 7 or 28 days and the gene expression profile was investigated using a genome-wide microarray analysis. The results were verified by qPCR and immunohistochemistry. Histomorphometry was used to evaluate the possible effect of Li+ on bone regeneration. The microarray analysis revealed a large number of significantly differentially regulated genes over time within the two implant groups. The Wnt signaling pathway was significantly affected by Li+, with approximately 34% of all Wnt-related markers regulated over time, compared to 22% for non-Li+ containing (control; Ctrl) implants. Functional cluster analysis indicated skeletal system morphogenesis, cartilage development and condensation as related to Li+. The downstream Wnt target gene, FOSL1, and the extracellular protein-encoding gene, ASPN, were significantly upregulated by Li+ compared with Ctrl. The presence of β-catenin, FOSL1 and ASPN positive cells was confirmed around implants of both groups. Interestingly, a significantly reduced bone area was observed over time around both implant groups. The presence of periostin and calcitonin receptor-positive cells was observed at both time points. This study is to the best of the authors' knowledge the first report evaluating the effect of a local release of Li+ from PLGA at the fracture site. The present study shows that during the current time frame and with the present dose of Li+ in PLGA implants, Li+ is not an enhancer of early bone growth, although it affects the Wnt signaling pathway.

Dental implant survival in diabetic patients; review and recommendations

Rising population of diabetic individuals across the world has become a big concern to the society. The persistent hyperglycemia may affect each and every tissue and consequently results in morbidity and eventually mortality in diabetic patients. A direct negative response of diabetes has been observed on oral tissues with few contradictions however, little are known about effect of diabetes on dental implant treatment and the consequent results. Many studies concerned with osteointegration and prognosis of dental implant in diabetic patients have been conducted and published since 1994. These studies have been critically reviewed to understand the impact of diabetes on the success of dental implant and the factors to improve osseointegration and consequently survival of dental implant in diabetic patients. Theoretical literatures and studies in diabetic animals substantiate high failure rate of implants but most of clinical studies indicated statistically insignificant failure of dental implants even in moderately uncontrolled diabetic patients. Success of dental implant in well and fairly controlled diabetic patients with proper treatment planning, prophylactic remedies and adequate postsurgical maintenance appears as good as normal individuals.

Effects of releasing recombinant human growth and differentiation factor-5 from poly(lactic-co-glycolic acid) microspheres for repair of the rat degenerated intervertebral disc

Purpose:

The objective of this study was to investigate the therapeutic potential of poly(lactic- co-glycolic acid) (PLGA) microspheres loaded with recombinant human growth and differentiation factor-5 (rhGDF-5) on the disc degeneration induced by needle puncture in a rat caudal disc model.

Methods:

The rhGDF-5-loaded PLGA microspheres were prepared by the water-oil-water double-emulsion solvent evaporation method, and release kinetics was determined over 42 days. Rats that underwent 21-G needle puncture at rat tail discs were injected with rhGDF-5/PLGA microspheres at four weeks after needle injury. At eight weeks after the injection, disc height, glycosaminoglycans content, and DNA content of the discs were evaluated. In addition, gene expression analysis of aggrecan, collagen type I, and collagen type II in the rat nucleus pulposus was measured by real-time polymerase chain reaction. Rat discs were also assessed by histology using hematoxylin and eosin stain.

Results:

Encapsulation of rhGDF-5 in PLGA microspheres guaranteed a sustained release of active rhGDF-5 for more than 42 days. The injection of GDF-5/PLGA microspheres resulted in a statistically significant restoration of disc height ( p < 0.01), improvement of sulfated glycosaminoglycan ( p < 0.05), DNA content ( p < 0.05), and significantly increased mRNA levels of collagen type II ( p < 0.01), and the differentiation index (the ratio of collagen type II to collagen type I, p < 0.01). In addition, rhGDF-5/PLGA microspheres treatment also improved histological changes induced by needle puncture.

Conclusions:

The results of this study suggest that injection of rhGDF-5 loaded in PLGA microspheres into rat tail discs may be as a promising therapy strategy to regenerate or repair the degenerative disc.

Systematic review of pre-clinical models assessing implant integration in locally compromised sites and/or systemically compromised animals

OBJECTIVE

The aim was to systematically search the dental literature for pre-clinical models assessing implant integration in locally compromised sites (part 1) and systemically compromised animals (part 2), and to evaluate the quality of reporting of included publications.

METHODS

A Medline search (1966-2011) was performed, complimented by additional hand searching. The quality of reporting of the included publications was evaluated using the 20 items of the ARRIVE (Animals in Research In Vivo Experiments) guidelines.

RESULTS

One-hundred and seventy-six (part 1; mean ARRIVE score = 15.6 ± 2.4) and 104 (part 2; 16.2 ± 1.9) studies met the inclusion criteria. The overall mean score for all included studies amounted to 15.8 ± 2.2. Housing (38.3%), allocation of animals (37.9%), numbers analysed (50%) and adverse events (51.4%) of the ARRIVE guidelines were the least reported. Statistically significant differences in mean ARRIVE scores were found depending on the publication date (p < 0.05), with the highest score of 16.7 ± 1.6 for studies published within the last 2 years.

CONCLUSIONS

A large number of studies met the inclusion criteria. The ARRIVE scores revealed heterogeneity and missing information for selected items in more than 50% of the publications. The quality of reporting shifted towards better-reported pre-clinical trials within recent years.

Surface modification and drug delivery for biointegration

Biointegration refers to the interconnection between a biomedical device and the recipient tissue. In many implant devices, the lack of proper biointegration can cause device failure and potentially serious medical problems. This review summarizes the recent progress in surface chemistry, drug delivery and antifouling methods to improve the biointegration of implants. Much progress has been made as our understanding of biological systems and material properties expands and as new technologies become available. This article addresses methods of enhancing biointegration by means of modifying implant surface chemistry and by drug-delivery approaches.

In vitro culture and characterization of alveolar bone osteoblasts isolated from type 2 diabetics

In order to understand the mechanisms of poor osseointegration following dental implants in type 2 diabetics, it is important to study the biological properties of alveolar bone osteoblasts isolated from these patients. We collected alveolar bone chips under aseptic conditions and cultured them in vitro using the tissue explants adherent method. The biological properties of these cells were characterized using the following methods: alkaline phosphatase (ALP) chemical staining for cell viability, Alizarin red staining for osteogenic characteristics, MTT test for cell proliferation, enzyme dynamics for ALP contents, radio-immunoassay for bone gla protein (BGP) concentration, and ELISA for the concentration of type I collagen (COL-I) in the supernatant. Furthermore, we detected the adhesion ability of two types of cells from titanium slices using non-specific immunofluorescence staining and cell count. The two cell forms showed no significant difference in morphology under the same culture conditions. However, the alveolar bone osteoblasts received from type 2 diabetic patients had slower growth, lower cell activity and calcium nodule formation than the normal ones. The concentration of ALP, BGP and COL-I was lower in the supernatant of alveolar bone osteoblasts received from type 2 diabetic patients than in that received from normal subjects (P < 0.05). The alveolar bone osteoblasts obtained from type 2 diabetic patients can be successfully cultured in vitro with the same morphology and biological characteristics as those from normal patients, but with slower growth and lower concentration of specific secretion and lower combining ability with titanium than normal ones.

Effects of local delivery of bFGF from PLGA microspheres on osseointegration around implants in diabetic rats

OBJECTIVE

Diabetes mellitus may impair bone healing after dental implant placement. The objective of this study was to evaluate the effects of the local delivery of basic fibroblast growth factor (bFGF) from poly(lactide-co-glycolide) (PLGA) microspheres on osseointegration around titanium implants in diabetic rats.

STUDY DESIGN

The bFGF-PLGA microspheres were prepared by the W/O/W double-emulsion solvent evaporation method. A total of 20 rats were used to create diabetic animal models by giving them a high-fat and high-sugar diet and a low-dose streptozotocin intraperitoneal injection. Titanium implants were planted into the tibias of the diabetic rats and into 10 normal rats. Microspheres were loaded on the surfaces of the implants in the bFGF intervention group before they were placed into the rats. After 4 or 8 weeks, the tibias containing the implants were removed and embedded with resin. Uncalcified tissue slices were prepared to compare osseointegration.

RESULTS

At 4 weeks, the bone-implant contact rate in the diabetic control group was less than that in the control group and the bFGF intervention group (P < .05). At 8 weeks, the results among the 3 groups were similar to those at 4 weeks.

CONCLUSIONS

The local delivery of bFGF from PLGA microspheres into areas around titanium implants may improve osseointegration in diabetic rats.

Development of mesenchymal stem cell-implant complexes by cultured cells sheet enhances osseointegration in type 2 diabetic rat model

This study investigated the hypothesis that a mesenchymal stem cells (MSC)-implant complex could be used in type 2 diabetic rats. Diabetes was modeled with type 2 diabetic rats induced by high fat diet with low dose streptozotocin (STZ) injected intraperitoneally. MSC sheets were harvested from culture flasks, wrapped around implants to construct the complexes, and then cultured in an osteogenic medium. The layered cell sheets integrated well with the implants and remained viable, with small mineralized nodules visible on the implant surfaces after culturing. The MSC-implant complexes were inserted into the right tibiae of the diabetic rats. Titanium implants served as controls. After four and eight weeks of healing, the tibiae were observed via MicroCT and harvested for histological examination. For the MSC-implant complexes, MicroCT analysis showed that bone volume ratio and trabecular thickness increased significantly (p<0.05), and trabecular separation decreased significantly (p<0.05) compared to the titanium implants in diabetic rats. Histological examination revealed a greater amount of new bone tissue forming around the MSC-implant complexes and a higher bone implant contact (BIC) rate than the titanium implants. These findings demonstrate that MSC-implant complexes possess osteogenic abilities and can be used in diabetic rats to improve the BIC rate. Thus, MSC-implant complexes provide a novel tissue engineering approach that promotes osseous healing and may potentially be useful in the treatment of diabetic patients.

The Application of Microencapsulation Techniques in the Treatment of Endodontic and Periodontal Diseases

In the treatment of intracanal and periodontal infections, the local application of antibiotics and other therapeutic agents in the root canal or in periodontal pockets may be a promising approach to achieve sustained drug release, high antimicrobial activity and low systemic side effects. Microparticles made from biodegradable polymers have been reported to be an effective means of delivering antibacterial drugs in endodontic and periodontal therapy. The aim of this review article is to assess recent therapeutic strategies in which biocompatible microparticles are used for effective management of periodontal and endodontic diseases. In vitro and in vivo studies that have investigated the biocompatibility or efficacy of certain microparticle formulations and devices are presented. Future directions in the application of microencapsulation techniques in endodontic and periodontal therapies are discussed.

An overview on the field of micro- and nanotechnologies for synthetic Peptide-based vaccines

The development of synthetic peptide-based vaccines has many advantages in comparison with vaccines based on live attenuated organisms, inactivated or killed organism, or toxins. Peptide-based vaccines cannot revert to a virulent form, allow a better conservation, and are produced more easily and safely. However, they generate a weaker immune response than other vaccines, and the inclusion of adjuvants and/or the use of vaccine delivery systems is almost always needed. Among vaccine delivery systems, micro- and nanoparticulated ones are attractive, because their particulate nature can increase cross-presentation of the peptide. In addition, they can be passively or actively targeted to antigen presenting cells. Furthermore, particulate adjuvants are able to directly activate innate immune system in vivo. Here, we summarize micro- and nanoparticulated vaccine delivery systems used in the field of synthetic peptide-based vaccines as well as strategies to increase their immunogenicity.