Spray freezing into liquid versus spray-freeze drying: Influence of atomization on protein aggregation and biological activity

Factors influencing amyloid fibril formation

Protein aggregation is a complex process with several stages that lead to the formation of complex structures and shapes with a broad variability in stability and toxicity. The aggregation process is affected by various factors and environmental conditions that disrupt the protein's original state, including internal factors like mutations, expression levels, and polypeptide chain truncation, as well as external factors, such as dense molecular surroundings, post-translation modifications, and interactions with other proteins, nucleic acids, small molecules, metal ions, chaperones, and lipid membranes. During the aggregation process, the biological activity of an aggregating protein may be reduced or eliminated, whereas the resulting aggregates may have the potential to be immunogenic, or they may have other undesirable properties. Finding the cause(s) of protein aggregation and controlling it to an acceptable level is among the most crucial topics of research in academia and biopharmaceutical companies. This chapter aims to review intrinsic pathways of protein aggregation and potential extrinsic variables that influence this process.

From cell factories to patients: Stability challenges in biopharmaceuticals manufacturing and administration with mitigation strategies

Active ingredients of biopharmaceuticals consist of a wide array of biomolecular structures, including those of enzymes, monoclonal antibodies, nucleic acids, and recombinant proteins. Recently, these molecules have dominated the pharmaceutical industry owing to their safety and efficacy. However, their manufacturing is hindered by high cost, inadequate batch-to-batch equivalence, inherent instability, and other quality issues. This article is an up-to-date review of the challenges encountered during different stages of biopharmaceutical production and mitigation of problems arising during their development, formulation, manufacturing, and administration. It is a broad overview discussion of stability issues encountered during product life cycle i.e., upstream processing (aggregation, solubility, host cell proteins, color change), downstream bioprocessing (aggregation, fragmentation), formulation, manufacturing, and delivery to patients.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Progress on Thin Film Freezing Technology for Dry Powder Inhalation Formulations

The surface drying process is an important technology in the pharmaceutical, biomedical, and food industries. The final stage of formulation development (i.e., the drying process) faces several challenges, and overall mastering depends on the end step. The advent of new emerging technologies paved the way for commercialization. Thin film freezing (TFF) is a new emerging freeze-drying technique available for various treatment modalities in drug delivery. TFF has now been used for the commercialization of pharmaceuticals, food, and biopharmaceutical products. The present review highlights the fundamentals of TFF along with modulated techniques used for drying pharmaceuticals and biopharmaceuticals. Furthermore, we have covered various therapeutic applications of TFF technology in the development of nanoformulations, dry powder for inhalations and vaccines. TFF holds promise in delivering therapeutics for lung diseases such as fungal infection, bacterial infection, lung dysfunction, and pneumonia.

Spray-Dried and Spray-Freeze-Dried Powder Formulations of an Anti-Interleukin-4Rα Antibody for Pulmonary Delivery

OBJECTIVE

The therapeutic options for severe asthma are limited, and the biological therapies are all parenterally administered. The purpose of this study was to formulate a monoclonal antibody that targets the receptor for IL-4, an interleukin implicated in the pathogenesis of severe asthma, into a dry powder intended for delivery via inhalation.

METHODS

Dehydration was achieved using either spray drying or spray freeze drying, which exposes the thermolabile biomacromolecules to stresses such as shear and adverse temperatures. 2-hydroxypropyl-beta-cyclodextrin was incorporated into the formulation as protein stabiliser and aerosol performance enhancer. The powder formulations were characterised in terms of physical and aerodynamic properties, while the antibody was assessed with regard to its structural stability, antigen-binding ability, and in vitro biological activity after drying.

RESULTS

The spray-freeze-dried formulations exhibited satisfactory aerosol performance, with emitted fraction exceeding 80% and fine particle fraction of around 50%. The aerosolisation of the spray-dried powders was hindered possibly by high residual moisture. Nevertheless, the antigen-binding ability and inhibitory potency were unaffected for the antibody in the selected spray-dried and spray-freeze-dried formulations, and the antibody was physically stable even after one-year storage at ambient conditions.

CONCLUSIONS

The findings of this study establish the feasibility of developing an inhaled dry powder formulation of an anti-IL-4R antibody using spray drying and spray freeze drying techniques with potential for the treatment of severe asthma.

Identification of Stability Constraints in the Particle Engineering of an Inhaled Monoclonal Antibody Dried Powder

Monoclonal antibody (mAb) based therapies may provide a valuable new treatment modality for acute and chronic lung diseases, including asthma, respiratory infections, and lung cancer. Currently mAbs are delivered via systemic administration routes, but direct delivery to the lungs via the inhaled route could provide higher concentrations at the site of disease and reduced off-target effects. Though lyophilized mAbs may be reconstituted and delivered to the lungs using nebulizers, dry powder inhalers provide a more patient-friendly delivery method based upon their fast administration time and portability. However, particle engineering processes required to prepare respirable dried powders for DPI delivery involve multiple potential stressors for mAbs, which have not been fully explored. In this study, a systematic examination of various aspects of the particle engineering process (atomization, freezing, drying, and storage) was performed to further understand their impact on mAb structure and aggregation. Using anti-streptavidin IgG1 as a model mAb, atomization settings were optimized using a design of experiments approach to elucidate the relationship between feed flow rate, formulation solid content, and atomization airflow rate and protein structural changes and aggregation. The optimized atomization conditions were then applied to spray drying and spray freezing drying particle engineering processes to determine the effects of freezing and drying on IgG1 stability and aerosol performance of the powders. IgG1 was found to be particularly susceptible to degradation induced by the expansive air-ice interface generated by spray freeze drying and this process also produced powders that exhibited decreased storage stability. This study further delineates the design space for manufacturing of respirable biologic therapies and is intended to serve as a roadmap for future development work.

A Narrative Review of a Pulmonary Aerosolized Formulation or a Nasal Drop Using Sera Containing Neutralizing Antibodies Collected from COVID-19-Recovered Patients as a Probable Therapy for COVID-19

Coronavirus disease 2019 (COVID-19) emerged as a new contagion during December 2019, since which time it has triggered a rampant spike in fatality rates worldwide due to insufficient medical treatments and a lack of counteragents and prompted the World Health Organization to declare COVID-19 a public health emergency. It is, therefore, vital to accelerate the screening of new molecules or vaccines to win the battle against this pandemic. Experiences from previous epidemiological data on coronaviruses guide investigators in designing and exploring new compounds for a safe and cost-effective treatment. Several reports on the severe acute respiratory syndrome (SARS) epidemic indicate that severe acute respiratory syndrome coronavirus (SARS-CoV) and the novel COVID-19 use angiotensin-converting enzyme 2 (ACE2) as a receptor for binding to the host cell in the lung epithelia through the spike protein on their virion surface. ACE2 is a mono-carboxypeptidase best known for cleaving major peptides and substrates. Its degree in human airway epithelia positively correlates with coronavirus infection. The treatment approach can be the neutralization of the virus entering lung epithelial cells by using sera containing antibodies collected from COVID-19-recovered patients. Hence, we herein propose a pulmonary aerosolized formulation or a nasal drop using sera, which contain antibodies to prevent, treat, or immunize against COVID-19 infection.

Next-Generation COVID-19 Vaccines Should Take Efficiency of Distribution into Consideration

The dire need for safe and effective coronavirus disease (COVID-19) vaccines is met with many vaccine candidates being evaluated in pre-clinical and clinical studies. The COVID-19 vaccine candidates currently in phase 3 or phase 2/3 clinical trials as well as those that recently received emergency use authorization (EUA) from the United States Food and Drug Administration (FDA) and/or other regulatory agencies worldwide require either cold (i.e., 2–8°C) or even freezing temperatures as low as −70°C for storage and distribution. Thus, existing cold chain will struggle to support both the standard national immunization programs and COVID-19 vaccination. The requirement for cold chain is now a major challenge towards worldwide rapid mass vaccination against COVID-19. In this commentary, we stress that thermostabilizing technologies are available to enable cold chain-free vaccine storage and distribution, as well as potential needle-free vaccination. Significant efforts on thermostabilizing technologies must now be applied on next-generation COVID-19 vaccines for more cost-effective worldwide mass vaccination and COVID-19 eradication.

Crystallization kinetics and glass-forming ability of rapidly crystallizing drugs studied by Fast Scanning Calorimetry

The use of the amorphous forms of drugs is a modern approach for the enhancement of bioavailability. At the same time, the high cooling rate needed to obtain the metastable amorphous state often prevents its investigation using conventional laboratory methods such as differential scanning calorimetry, X-ray powder diffractometry. One of the ways to overcome this problem may be the application of Fast Scanning Calorimetry. This method allows direct determination of the critical cooling rate of the melt and kinetic parameters of the crystallization for bad glass formers. In the present work, the amorphous states of dopamine hydrochloride and atenolol were created using Fast Scanning Calorimetry for the first time. Critical cooling rates and glass transition temperatures of these drugs were determined. Based on the values of the kinetic fragility parameter, dopamine hydrochloride glass can be considered strong, while atenolol glass is moderately strong. Both model-based and model-free approaches were employed to determine the kinetic parameters of cold crystallization of dopamine and atenolol. The results were compared with the data from isothermal crystallization experiments. The Nakamura crystallization model provides the best description of the crystallization process and can be used to predict the long term stability of the amorphous forms of the drugs. The presented approaches may find applications in predicting the storage time and choosing the optimal storage conditions of the amorphous drugs prone to crystallization.

Spray Freeze-Drying as a Solution to Continuous Manufacturing of Pharmaceutical Products in Bulk

Pharmaceutical manufacturing is evolving from traditional batch processes to continuous ones. The new global competition focused on throughput and quality of drug products is certainly the driving force behind this transition which, thus, represents the new challenge of pharmaceutical manufacturing and hence of lyophilization as a downstream operation. In this direction, the present review deals with the most recent technologies, based on spray freeze-drying, that can achieve this objective. It provides a comprehensive overview of the physics behind this process and of the most recent equipment design.

Evaluation of Process Conditions for Ultrasonic Spray Freeze Drying of Transglutaminase

In this study, a commercial transglutaminase enzyme was dried using an ultrasonic spray freeze drying method and the effects of the process conditions were optimized to maximize the final transglutaminase activity. Accordingly, process parameters affecting enzyme activity were selected, such as nozzle frequency (48 and 120 kHz), flow rate (2, 5 and 8 mL/min) and plate temperature for secondary drying (25, 35 and 45 °C). Moreover, the effects of different pH values (pH=2.0 and pH=9.0) and high temperature (80 °C) on enzyme activity, physical properties and particle morphology of transglutaminase were discussed. According to the results, transglutaminase preserved its activity despite ultrasonic spray freeze drying. Sonication enhanced the enzyme activity. Using the desirability function method, the optimum process conditions were determined to be flow rate 3.10 mL/min, plate temperature 45 °C and nozzle frequency 120 kHz. The predicted activity ratio was 1.17, and experimentally obtained ratio was 1.14±0.02. Furthermore, enzyme produced by ultrasonic spray freeze drying had low moisture values (2.92-4.36%) at 8 h of drying. When the morphological structure of the transglutaminase particles produced by ultrasonic spray freeze drying under the optimum conditions was examined, spherical particles with pores on their surfaces were observed. In addition, flow properties of the transglutaminase powders were considered as fair under most conditions according to the Carr index.

Effect of Particle Formation Process on Characteristics and Aerosol Performance of Respirable Protein Powders

Pulmonary delivery of biopharmaceuticals may enable targeted local therapeutic effect and noninvasive systemic administration. Dry powder inhaler (DPI) delivery is an established patient-friendly approach for delivering large molecules to the lungs; however, the complexities of balancing protein stability with aerosol performance require that the design space of biopharmaceutical DPI formulations is rigorously explored. Utilizing four rationally selected formulations obtained using identical atomization conditions, an extensive study of the effect of the particle formation process (spray drying or spray freeze-drying) on powder properties, aerosol performance, and protein stability was performed. Multiple linear regression analysis was used to understand the relationship between powder properties, device dispersion mechanism, and aerosol performance. Spray drying and spray freeze-drying, despite the same spraying conditions, produced powders with vastly different physical characteristics, though similar aerosol performance. The resulting regression model points to the significance of particle size, density, and surface properties on the resulting aerosol performance, with these factors weighing differently according to the device dispersion mechanism utilized (shear-based or impaction-based). The physical properties of the produced spray dried and spray freeze-dried powders have differing implications for long-term stability, which will be explored extensively in a future study.

Influence of Formulation Factors on the Aerosol Performance and Stability of Lysozyme Powders: a Systematic Approach

With the growing interest in developing biologics for pulmonary delivery, systematic fast screening methods are needed for rapid development of formulations. Due to the labile nature of macromolecules, the development of stable, biologically active formulations with desired aerosol performance imposes several challenges both from a formulation and processing perspective. In this study, spray-freeze-drying was used to develop respirable protein powders. In order to systematically map the selected design space, lysozyme aqueous pre-formulations were prepared based on a constrained mixture design of experiment. The physicochemical properties of the resulting powders were characterized and the effects of formulation factors on aerosol performance and protein stability were systematically screened using a logic flow chart. Our results elucidated several relevant formulation attributes (density, total solid content, protein:sugars ratio) required to achieve a stable lysozyme powder with desirable characteristics for pulmonary delivery. A similar logical fast screening strategy could be used to delineate the appropriate design space for different types of proteins and guide the development of powders with pre-determined aerodynamic properties.

Formulation of High-Performance Dry Powder Aerosols for Pulmonary Protein Delivery

PURPOSE

Pulmonary delivery of biologics is of great interest, as it can be used for the local treatment of respiratory diseases or as a route to systemic drug delivery. To reach the full potential of inhaled biologics, a formulation platform capable of producing high performance aerosols without altering protein native structure is required.

METHODS

A formulation strategy using Particle Replication in Non-wetting Templates (PRINT) was developed to produce protein dry powders with precisely engineered particle morphology. Stability of the incorporated proteins was characterized and the aerosol properties of the protein dry powders was evaluated in vitro with an Andersen Cascade Impactor (ACI).

RESULTS

Model proteins bovine serum albumin (BSA) and lysozyme were micromolded into 1 μm cylinders composed of more than 80% protein, by mass. Extensive characterization of the incorporated proteins found no evidence of alteration of native structures. The BSA formulation produced a mass median aerodynamic diameter (MMAD) of 1.77 μm ± 0.06 and a geometric standard deviation (GSD) of 1.51 ± 0.06 while the lysozyme formulation had an MMAD of 1.83 μm ± 0.12 and a GSD of 1.44 ± 0.03.

CONCLUSION

Protein dry powders manufactured with PRINT could enable high-performance delivery of protein therapeutics to the lungs.

Supercritical carbon dioxide-based technologies for the production of drug nanoparticles/nanocrystals - A comprehensive review

Low drug bioavailability, which is mostly a result of poor aqueous drug solubilities and of inadequate drug dissolution rates, is one of the most significant challenges that pharmaceutical companies are currently facing, since this may limit the therapeutic efficacy of marketed drugs, or even result in the discard of potential highly effective drug candidates during developmental stages. Two of the main approaches that have been implemented in recent years to overcome poor drug solubility/dissolution issues have frequently involved drug particle size reduction (i.e., micronization/nanonization) and/or the modification of some of the physicochemical and structural properties of poorly water soluble drugs. A large number of particle engineering methodologies have been developed, tested, and applied in the synthesis and control of particle size/particle-size distributions, crystallinities, and polymorphic purities of drug micro- and nano-particles/crystals. In recent years pharmaceutical processing using supercritical fluids (SCF), in general, and supercritical carbon dioxide (scCO₂), in particular, have attracted a great attention from the pharmaceutical industry. This is mostly due to the several well-known advantageous technical features of these processes, as well as to other increasingly important subjects for the pharmaceutical industry, namely their "green", sustainable, safe and "environmentally-friendly" intrinsic characteristics. In this work, it is presented a comprehensive state-of-the-art review on scCO₂-based processes focused on the formation and on the control of the physicochemical, structural and morphological properties of amorphous/crystalline pure drug nanoparticles. It is presented and discussed the most relevant scCO₂, scCO₂-based fluids and drug physicochemical properties that are pertinent for the development of successful pharmaceutical products, namely those that are critical in the selection of an adequate scCO₂-based method to produce pure drug nanoparticles/nanocrystals. scCO₂-based nanoparticle formation methodologies are classified in three main families, and in terms of the most important role played by scCO₂ in particle formation processes: as a solvent; as an antisolvent or a co-antisolvent; and as a "high mobility" additive (a solute, a co-solute, or a co-solvent). Specific particle formation methods belonging to each one of these families are presented, discussed and compared. Some selected amorphous/crystalline drug nanoparticles that were prepared by these methods are compiled and presented, namely those studied in the last 10-15 years. A special emphasis is given to the formation of drug cocrystals. It is also discussed the fundamental knowledge and the main mechanisms in which the scCO₂-based particle formation methods rely on, as well as the current status and urgent needs in terms of reliable experimental data and of robust modeling approaches. Other addressed and discussed topics include the currently available and the most adequate physicochemical, morphological and biological characterization methods required for pure drug nanoparticles/nanocrystals, some of the current nanometrology and regulatory issues associated to the use of these methods, as well as some scale-up, post-processing and pharmaceutical regulatory subjects related to the industrial implementation of these scCO₂-based processes. Finally, it is also discussed the current status of these techniques, as well as their future major perspectives and opportunities for industrial implementation in the upcoming years.

Freeze-dried and re-hydrated liquid crystalline nanoparticles stabilized with disaccharides for drug-delivery of the plectasin derivative AP114 antimicrobial peptide

Liquid crystalline nanoparticles (LCNPs), e.g. cubosomes and hexosomes, are receiving more and more attraction as drug delivery vehicles. Dry powder formulation that forms LCNPs upon hydration can be advantageous to make new routes of administration accessible. In this work, we investigate use of three disaccharides (lactose, trehalose and sucrose) as protective matrices for glycerol monooleate based LCNP forming powders produced by freeze-drying. Phase behavior, particle size and size distributions at the different preparation steps were monitored by small angle x-ray scattering (SAXS) and dynamic light scattering (DLS). Particle appearance was imaged by cryogenic transmission electron microscopy (cryo-TEM). Moreover, the therapeutic relevant antimicrobial peptide AP114 (plectasin derivative) was incorporated in the formulations. Peptide encapsulation and release as well as in vitro antibacterial effect were investigated. Results showed that all freeze-dried powders did form particles with liquid crystalline structure upon hydration. However, a phase transition from the bicontinuous cubic Pn3m to the reversed hexagonal was observed, as a consequence of sugar addition and the freeze-drying procedure. Data indicates that trehalose is the preferred choice of lyo-protectant in order to maintain a mono-modal particle size distribution. In addition, antimicrobial activity of AP114-containing formulations was found to be highest for the formulation containing trehalose. The release kinetics of AP114 from the nanoparticles was strongly affected by the dimensions of the hexagonal phase. Larger dimension of the hexagonal phase, significantly improved the release of AP114 and antimicrobial activity of the formulation.

Effects of dissolving microneedle fabrication parameters on the activity of encapsulated lysozyme

Dissolving microneedle (DMN) is referred to a microscale needle that encapsulates drug(s) within a biodegradable polymer matrix and delivers it into the skin in a minimally invasive manner. Although vast majority of studies have emphasized DMN as an efficient drug delivery system, the activity of DMN-encapsulated proteins or antigens can be significantly affected due to a series of thermal, physical and chemical stress factors during DMN fabrication process and storage period. The objective of this study is to evaluate the effects of DMN fabrication parameters including polymer type, polymer concentration, fabrication and storage temperature, and drying conditions on the activity of the encapsulated therapeutic proteins by employing lysozyme (LYS) as a model protein. Our results indicate that a combination of low temperature fabrication, mild drying condition, specific polymer concentration, and addition of protein stabilizer can maintain the activity of encapsulated LYS up to 99.8 ± 3.8%. Overall, findings of this study highlight the importance of optimizing DMN fabrication parameters and paves way for the commercialization of an efficient delivery system for therapeutics.

A comprehensive screening platform for aerosolizable protein formulations for intranasal and pulmonary drug delivery

Aerosolized administration of biopharmaceuticals to the airways is a promising route for nasal and pulmonary drug delivery, but - in contrast to small molecules - little is known about the effects of aerosolization on safety and efficacy of biopharmaceuticals. Proteins are sensitive against aerosolization-associated shear stress. Tailored formulations can shield proteins and enhance permeation, but formulation development requires extensive screening approaches. Thus, the aim of this study was to develop a cell-based in vitro technology platform that includes screening of protein quality after aerosolization and transepithelial permeation. For efficient screening, a previously published aerosolization-surrogate assay was used in a design of experiments approach to screen suitable formulations for an IgG and its antigen-binding fragment (Fab) as exemplary biopharmaceuticals. Efficient, dose-controlled aerosol-cell delivery was performed with the ALICE-CLOUD system containing RPMI 2650 epithelial cells at the air-liquid interface. We could demonstrate that our technology platform allows for rapid and efficient screening of formulations consisting of different excipients (here: arginine, cyclodextrin, polysorbate, sorbitol, and trehalose) to minimize aerosolization-induced protein aggregation and maximize permeation through an in vitro epithelial cell barrier. Formulations reduced aggregation of native Fab and IgG relative to vehicle up to 50% and enhanced transepithelial permeation rate up to 2.8-fold.

The immunogenicity of thin-film freeze-dried, aluminum salt-adjuvanted vaccine when exposed to different temperatures

Insoluble aluminum salts such as aluminum oxyhydroxide have been used for decades as adjuvants in human vaccines, and many vaccines contain aluminum salts as adjuvants. Aluminum salt-adjuvanted vaccines must be managed in cold-chain (2-8° C) during transport and storage, as vaccine antigens in general are too fragile to be stable in ambient temperatures, and unintentional slowing freezing causes irreversible aggregation and permanent damage to the vaccines. Previously, we reported that thin-film freeze-drying can be used to convert vaccines adjuvanted with an aluminum salt from liquid suspension into dry powder without causing particle aggregation or decreasing in immunogenicity following reconstitution. In the present study, using ovalbumin (OVA)-adsorbed Alhydrogel® (i.e. aluminum oxyhydroxide, 2% w/v) as a model vaccine, we showed that the immunogenicity of thin-film freeze-dried OVA-adsorbed Alhydrogel® vaccine powder was not significantly changed after it was exposed for an extended period of time in temperatures as high as 40° C or subjected to repeated slow freezing-and-thawing. It is expected that immunization programs can potentially benefit by integrating thin-film freeze-drying into vaccine preparations.

Investigation of recrystallization of amorphous trehalose through hot-humidity stage X-ray powder diffraction

The aim of this work was an investigation of the physical changes of the amorphous model material spray-dried trehalose through the use of various analytical techniques and to identify a suitable, rapid method able to quantify the changes. The crystallinity changes and recrystallization process of amorphous samples were investigated by hot-humidity stage X-ray powder diffractometry (HH-XRPD) with fresh samples, conventional X-ray powder diffractometry (XRPD) used stored samples and by differential scanning calorimetry (DSC). The data from the three methods were compared and the various forms of trehalose were analysed. HH-XRPD demonstrated that the recrystallization began at 40 and 60°C up to 45% RH and at 70°C up to 30% RH into dihydrate form. At 70°C up to 60% RH the anhydrous form of trehalose appeared too. Conventional XRPD results showed, that in the 28days stored samples the dihydrate form was detected at 40°C, 50% RH. Storage at 60°C, 40% RH resulted in the appearance of the anhydrous form and at 60°C, 50% RH both polymorphic forms were detected. By carrying out the DSC measurements at different temperatures the fraction of recrystallized trehalose dihydrate was detected. The recrystallization investigated by HH-XRPD and DSC followed Avrami kinetics, the calculated rate constants of isothermal crystallization (K) were same. Both HH-XRPD and conventional XRPD was suitable for the detection of the physical changes of the amorphous model material. DSC measurements showed similar results as HH-XRPD. Primarily HH-XRPD could be suggested for prediction, because the method is fast and every changes could be studied on one sample.

Nanoformulation and encapsulation approaches for poorly water-soluble drug nanoparticles

During the last few decades the nanomedicine sector has emerged as a feasible and effective solution to the problems faced by the high percentage of poorly water-soluble drugs. Decreasing the size of such drug compounds to the nanoscale can significantly change their physical properties, which lays the foundation for the use of nanomedicine for pharmaceutical applications. Various techniques have been developed to produce poorly water-soluble drug nanoparticles, mainly to address the poor water-soluble issues but also for the efficient and targeted delivery of such drugs. These techniques can be generally categorized into top-down, bottom-up and encapsulation approaches. Among them, the top-down approaches have been the main choice for industrial preparation of drug nanoparticles while other methods are actively investigated by researchers. In this review, we aim to give a comprehensive overview and latest progress of the top-down, bottom-up, and encapsulation methods for the preparation of poorly water-soluble drug nanoparticles and how solvents and additives can be selected for these methods. In addition to the more industrially applied top-down approaches, the review is focused more on bottom-up and encapsulation methods, particularly covering supercritical fluid-related methods, cryogenic techniques, and encapsulation with dendrimers and responsive block copolymers. Some of the approved and mostly used nanodrug formulations on the market are also covered to demonstrate the applications of poorly water-soluble drug nanoparticles. This review is complete with perspectives on the development and challenges of fabrication techniques for more effective nanomedicine.

Advanced protein formulations

It is well recognized that protein product development is far more challenging than that for small-molecule drugs. The major challenges include inherent sensitivity to different types of stresses during the drug product manufacturing process, high rate of physical and chemical degradation during long-term storage, and enhanced aggregation and/or viscosity at high protein concentrations. In the past decade, many novel formulation concepts and technologies have been or are being developed to address these product development challenges for proteins. These concepts and technologies include use of uncommon/combination of formulation stabilizers, conjugation or fusion with potential stabilizers, site-specific mutagenesis, and preparation of nontraditional types of dosage forms-semiaqueous solutions, nonfreeze-dried solid formulations, suspensions, and other emerging concepts. No one technology appears to be mature, ideal, and/or adequate to address all the challenges. These gaps will likely remain in the foreseeable future and need significant efforts for ultimate resolution.

A method of lyophilizing vaccines containing aluminum salts into a dry powder without causing particle aggregation or decreasing the immunogenicity following reconstitution

Many currently licensed and commercially available human vaccines contain aluminum salts as vaccine adjuvants. A major limitation with these vaccines is that they must not be exposed to freezing temperatures during transport or storage such that the liquid vaccine freezes, because freezing causes irreversible coagulation that damages the vaccines (e.g., loss of efficacy). Therefore, vaccines that contain aluminum salts as adjuvants are formulated as liquid suspensions and are required to be kept in cold chain (2-8°C) during transport and storage. Formulating vaccines adjuvanted with aluminum salts into dry powder that can be readily reconstituted before injection may address this limitation. Spray freeze-drying of vaccines with low concentrations of aluminum salts and high concentrations of trehalose alone, or a mixture of sugars and amino acids, as excipients can convert vaccines containing aluminum salts into dry powder, but fails to preserve the particle size and/or immunogenicity of the vaccines. In the present study, using ovalbumin as a model antigen adsorbed onto aluminum hydroxide or aluminum phosphate, a commercially available tetanus toxoid vaccine adjuvanted with potassium alum, a human hepatitis B vaccine adjuvanted with aluminum hydroxide, and a human papillomavirus vaccine adjuvanted with aluminum hydroxyphosphate sulfate, it was shown that vaccines containing a relatively high concentration of aluminum salts (i.e., up to ~1%, w/v, of aluminum hydroxide) can be converted into a dry powder by thin-film freezing followed by removal of the frozen solvent by lyophilization while using low levels of trehalose (i.e., as low as 2% w/v) as an excipient. Importantly, the thin-film freeze-drying process did not cause particle aggregation, nor decreased the immunogenicity of the vaccines. Moreover, repeated freezing-and-thawing of the dry vaccine powder did not cause aggregation. Thin-film freeze-drying is a viable platform technology to produce dry powders of vaccines that contain aluminum salts.

Protein particulate detection issues in biotherapeutics development--current status

Formation of aggregates and particulates in biopharmaceutical formulation continues to be one of the major quality concerns in biotherapeutics development. The presence of large quantities of aggregates is believed to be one of the causes of unwanted immunogenic responses. Protein particulates can form in a wide range of sizes and shapes. Therefore, a comprehensive characterization of particulates in biologics formulation continues to be challenging. The quantity of small size aggregates (e.g., dimer) in a stable biologics formulation is well controlled using precision analytical techniques (e.g., high-performance liquid chromatography). Particulate in clinical and commercial formulations is monitored using visual inspection and subvisible particulate counting assays. While visual inspection (by human eye or automated systems) is intended to detect particulates (intrinsic and extrinsic) of ~100 μm or larger, the subvisible counting methods cover smaller size ranges down to 10 μm. It is well recognized that research of particulates in the submicron (<1 μm) and low-micron (1-10 μm) ranges may provide important clues to understand the mechanism of particulate formation. The recent years have seen a significant increase in the development of newer technologies for more comprehensive characterization of particulates. This is attributed to increased awareness in this field of research over the past 5 years, stimulated by scholarly articles, commentaries, and robust discussions in various forums. This article provides an overview of emerging detection technologies that provide complementary characterization data encompassing a wider size range of particulates. It also discusses their advantages and limitations in the context of applications in biotherapeutics development.