Novel polymeric film coatings for colon targeting: Drug release from coated pellets

Colon targeting in rats, dogs and IBD patients with species-independent film coatings

Polysaccharides were identified, which allow for colon targeting in human Inflammatory Bowel Disease (IBD) patients, as well as in rats and dogs (which are frequently used as animals in preclinical studies). The polysaccharides are degraded by colonic enzymes (secreted by bacteria), triggering the onset of drug release at the target site. It has to be pointed out that the microbiota in rats, dogs and humans substantially differ. Thus, the performance of this type of colon targeting system observed in animals might not be predictive for patients. The aim of this study was to limit this risk. Different polysaccharides were exposed to culture medium inoculated with fecal samples from IBD patients, healthy dogs and "IBD rats" (in which colonic inflammation was induced). Dynamic changes in the pH of the culture medium were used as an indicator for the proliferation of the bacteria and, thus, the potential of the polysaccharides to serve as their substrate. Fundamental differences were observed with respect to the extent of the pH variations as well as their species-dependency. The most promising polysaccharides were used to prepare polymeric film coatings surrounding 5-aminosaliciylic acid (5-ASA)-loaded starter cores. To limit premature polysaccharide dissolution/swelling in the upper gastro intestinal tract, ethylcellulose was also included in the film coatings. Drug release was monitored upon exposure to culture medium inoculated with fecal samples from IBD patients, healthy dogs and "IBD rats". For reasons of comparison, also 5-ASA release in pure culture medium was measured. Most film coatings showed highly species-dependent drug release kinetics or limited colon targeting capacity. Interestingly, extracts from aloe vera and reishi (a mushroom) showed a promising potential for colon targeting in all species.

Colon-targeted delivery of polyphenols: construction principles, targeting mechanisms and evaluation methods

Polyphenols have received considerable attention for their promotive effects on colonic health. However, polyphenols are mostly sensitive to harsh gastrointestinal environments, thus, must be protected. It is necessary to design and develop a colon-targeted delivery system to improve the stability, colon-targeting and bioavailability of polyphenols. This paper mainly introduces research on colon-targeted controlled release of polyphenols. The physiological features affecting the dissolution, release and absorption of polyphenol-loaded delivery systems in the colon are first discussed. Simultaneously, the types of colon-targeted carriers with different release mechanisms are described, and colon-targeting assessment models that have been studied so far and their advantages and limitations are summarized. Based on the current research on polyphenols colon-targeting, outlook and reflections are proposed, with the goal of inspiring strategic development of new colon-targeted therapeutics to ensure that the polyphenols reach the colon with complete bioactivity.

Film Coatings Based on Aqueous Shellac Ammonium Salt "Swanlac® ASL 10" and Inulin for Colon Targeting

Over the past decades, increasing interests took place in the realm of drug delivery systems. Beyond treating intestinal diseases such as inflammatory bowel disease, colon targeting can provide possible applications for oral administration of proteins as well as vaccines due to the lower enzymatic activity in the distal part of GIT. To date, many strategies are employed to reach the colon. This article encompasses different biomaterials tested as film coatings and highlights appropriate formulations for colonic drug delivery. A comparison of different films was made to display the most interesting drug release profiles. These films contained ethylcellulose, as a thermoplastic polymer, blended with an aqueous shellac ammonium salt solution. Different blend ratios were selected as well for thin films as for coated mini-tablets, mainly varying as follows: (80:20); (75:25); (60:40). The impact of blend ratio and coating level was examined as well as the addition of natural polysaccharide "inulin" to target the colon. In vitro drug release was measured in 0.1 M HCl for 2 h followed by phosphate buffer saline pH 6.8 to simulate gastric and intestinal fluids, respectively. Coated mini-tablets were exposed to fresh fecal samples of humans in order to simulate roughly colonic content. Several formulations were able to fully protect theophylline as a model drug up to 8 h in the upper GIT, but allowing for prolonged release kinetics in the colon. These very interesting colonic release profiles were related to the amount of the natural polysaccharide added into the system.

Microbiota-sensitive drug delivery systems based on natural polysaccharides for colon targeting

Colon targeting is an ongoing challenge, particularly for the oral administration of biological drugs or local treatment of inflammatory bowel disease (IBD). In both cases, drugs are known to be sensitive to the harsh conditions of the upper gastrointestinal tract (GIT) and, thus, must be protected. Here, we provide an overview of recently developed colonic site-specific drug delivery systems based on microbiota sensitivity of natural polysaccharides. Polysaccharides act as a substrate for enzymes secreted by the microbiota located in the distal part of GIT. The dosage form is adapted to the pathophysiology of the patient and, thus, a combination of bacteria-sensitive and time-controlled release or pH-dependent systems can be used for delivery.

In vitro and in vivo evaluation of a pH-, microbiota- and time-based oral delivery platform for colonic release

Several formulation strategies have been proposed for oral colon delivery, particularly for the therapy of inflammatory bowel disease (IBD). However, targeting the large intestine remains a challenging goal. The aim of this study was to develop and evaluate a novel type of drug delivery system, which is based on multiple drug release triggers for reliable performance. The system consists of: (i) a drug core, (ii) an inner swellable low-viscosity hydroxypropyl methylcellulose (HPMC) layer, and (iii) an outer film coating based on a Eudragit® S:high-methoxyl (HM) pectin (7:3 w/w) blend, optionally containing chitosan. Convex immediate release tablets (2 or 4 mm in diameter) containing paracetamol or 5-aminosalicylic acid (5-ASA) were coated in a fluid bed. The double-coated tablets exhibited pulsatile release profiles when changing the release medium from 0.1 N HCl to phosphate buffer pH 7.4. Also, drug release was faster in simulated colonic fluid (SCF) in the presence of fecal bacteria from IBD patients compared to control culture medium from tablets with outer Eudragit® S: HM pectin: chitosan coatings. The latter systems showed promising results in the control of the progression of colitis and alteration of the microbiota in a preliminary rat study.

An Advanced Bioreactor Simulating Dynamic Physiological Conditions in the Human Ascending Colon: MimiCol3

In recent years, the colon has become a hot topic in biopharmaceutical research as several in vitro models of the human colon have been presented. A major focus is on the characterization of the microbiota and its capabilities. The aim of the present study was to further develop the MimiCol, preserving its properties and accelerating data acquisition. Emphasis was placed on the simplicity of its design and easy scalability. To prove the viability of the concept, degradation of sulfasalazine was investigated, and the bacterial composition during the experiment was assessed by 16S rRNA sequencing. The transfer of the experimental conditions to the new model was successful. Commercially available components were implemented in the setup. The model MimiCol³ represented the colon ascendens satisfactorily in its properties regarding volume, pH value, and redox potential. 16S rRNA sequencing led to further insights into the bacterial composition in the vessels. Degradation of sulfasalazine was in good agreement with in vivo data. The new model of the colon ascendens MimiCol³ enabled us to collect more reliable data, as three experiments were conducted simultaneously under the same conditions.

Advances in smart delivery of food bioactive compounds using stimuli-responsive carriers: Responsive mechanism, contemporary challenges, and prospects

Many important food bioactive compounds are plant secondary metabolites that have traditional applications for health promotion and disease prevention. However, the chemical instability and poor bioavailability of these compounds represent major challenges to researchers. In the last decade, therefore, major impetus has been given for the research and development of advanced carrier systems for the delivery of natural bioactive molecules. Among them, stimuli-responsive carriers hold great promise for simultaneously improving stability, bioavailability, and more importantly delivery and on-demand release of intact bioactive phytochemicals to target sites in response to certain stimuli or combination of them (e.g., pH, temperature, oxidant, enzyme, and irradiation) that would eventually enhance therapeutic outcomes and reduce side effects. Hybrid formulations (e.g., inorganic-organic complexes) and multi-stimuli-responsive formulations have demonstrated great potential for future studies. Therefore, this review systematically compiles and assesses the recent advances on the smart delivery of food bioactive compounds, particularly quercetin, curcumin, and resveratrol through stimuli-responsive carriers, and critically reviews their functionality, underlying triggered-release mechanism, and therapeutic potential. Finally, major limitations, contemporary challenges, and possible solutions/future research directions are highlighted. Much more research is needed to optimize the processing parameters of existing formulations and to develop novel ones for lead food bioactive compounds to facilitate their food and nutraceutical applications.

Quantification of porogen effect on the drug release from single- and multi-layered ethylcellulose coated pellets containing single or combined drugs

The aim of this work was to develop a mathematical model to estimate the drug release from a conventional single-compartment reservoir pellet and extend its applicability to multi-compartment reservoir pellets. Conventional pellets were prepared by layering the drug onto starter-core then applying various ethylcellulose/HPC coatings for drug release control. Multi-layered pellets comprised a first drug layer of propranolol HCl (D₁) followed by a first controlled release coating (C₁) and consecutively a second drug layer of carbamazepine or caffeine (D₂) and then a second controlled-release coating (C₂). Drug release from single- and multi-compartment pellets generally increased with an increase of the water-soluble HPC in the coatings. The response described a sigmoidal curve, which agreed with a cumulative normal distribution function. The developed mathematical model facilitated quantification of the drug release of pellets as a function of the porogen content and the coating level. Additionally, the model was applied successfully in multi-compartment pellets to calculate theses effects on the release of drugs with a broad range of aqueous solubility.

Injection Molded Capsules for Colon Delivery Combining Time-Controlled and Enzyme-Triggered Approaches

A new type of colon targeting system is presented, combining time-controlled and enzyme-triggered approaches. Empty capsule shells were prepared by injection molding of blends of a high-amylose starch and hydroxypropyl methylcellulose (HPMC) of different chain lengths. The dissolution/erosion of the HPMC network assures a time-controlled drug release, i.e., drug release starts upon sufficient shell swelling/dissolution/erosion. In addition, the presence of high-amylose starch ensures enzyme-triggered drug release. Once the colon is reached, the local highly concentrated bacterial enzymes effectively degrade this polysaccharide, resulting in accelerated drug release. Importantly, the concentration of bacterial enzymes is much lower in the upper gastrointestinal tract, thus enabling site-specific drug delivery. The proposed capsules were filled with acetaminophen and exposed to several aqueous media, simulating the contents of the gastrointestinal tract using different experimental setups. Importantly, drug release was pulsatile and occurred much faster in the presence of fecal samples from patients. The respective lag times were reduced and the release rates increased once the drug started to be released. It can be expected that variations in the device design (e.g., polymer blend ratio, capsule shell geometry and thickness) allow for a large variety of possible colon targeting release profiles.

In Vitro Methods to Study Colon Release: State of the Art and An Outlook on New Strategies for Better In-Vitro Biorelevant Release Media

The primary focus of this review is a discussion regarding in vitro media for colon release, but we also give a brief overview of colon delivery and the colon microbiota as a baseline for this discussion. The large intestine is colonized by a vast number of bacteria, approximately 1012 per gram of intestinal content. The microbial community in the colon is complex and there is still much that is unknown about its composition and the activity of the microbiome. However, it is evident that this complex microbiota will affect the release from oral formulations targeting the colon. This includes the release of active drug substances, food supplements, and live microorganisms, such as probiotic bacteria and bacteria used for microbiota transplantations. Currently, there are no standardized colon release media, but researchers employ in vitro models representing the colon ranging from reasonable simple systems with adjusted pH with or without key enzymes to the use of fecal samples. In this review, we present the pros and cons for different existing in vitro models. Furthermore, we summarize the current knowledge of the colonic microbiota composition which is of importance to the fermentation capacity of carbohydrates and suggest a strategy to choose bacteria for a new more standardized in vitro dissolution medium for the colon.

A review on 5-aminosalicylic acid colon-targeted oral drug delivery systems

Site-specific colon drug delivery is a practical approach for the treatment of local diseases of the colon with several advantages such as rapid onset of action and reduction of the dosage of the drug as well as minimization of harmful side effects. 5-aminosalicylic acid (5-ASA) is a drug of choice in the treatment of inflammatory bowel disease and colitis. For the efficient delivery of this drug, it is vital to prevent 5-ASA release in the upper part of the gastrointestinal tract and to promote its release in the proximal colon. Different approaches including chemical manipulation of drug molecule for production of prodrugs or modification of drug delivery systems using pH-dependent, time-dependent and/or bacterially biodegradable materials have been tried to optimize 5-ASA delivery to the colon. In the current review, the different strategies utilized in the design and development of an oral colonic delivery dosage form of 5-ASA are presented and discussed.

Nanostructure-Enabled and Macromolecule-Grafted Surfaces for Biomedical Applications

Advances in nanotechnology and nanomaterials have enabled the development of functional biomaterials with surface properties that reduce the rate of the device rejection in injectable and implantable biomaterials. In addition, the surface of biomaterials can be functionalized with macromolecules for stimuli-responsive purposes to improve the efficacy and effectiveness in drug release applications. Furthermore, macromolecule-grafted surfaces exhibit a hierarchical nanostructure that mimics nanotextured surfaces for the promotion of cellular responses in tissue engineering. Owing to these unique properties, this review focuses on the grafting of macromolecules on the surfaces of various biomaterials (e.g., films, fibers, hydrogels, and etc.) to create nanostructure-enabled and macromolecule-grafted surfaces for biomedical applications, such as thrombosis prevention and wound healing. The macromolecule-modified surfaces can be treated as a functional device that either passively inhibits adverse effects from injectable and implantable devices or actively delivers biological agents that are locally based on proper stimulation. In this review, several methods are discussed to enable the surface of biomaterials to be used for further grafting of macromolecules. In addition, we review surface-modified films (coatings) and fibers with respect to several biomedical applications. Our review provides a scientific update on the current achievements and future trends of nanostructure-enabled and macromolecule-grafted surfaces in biomedical applications.

A novel dissolution media for testing drug release from a nanostructured polysaccharide-based colon specific drug delivery system: an approach to alternative colon media

The aim of this study was to develop a novel microbially triggered and animal-sparing dissolution method for testing of nanorough polysaccharide-based micron granules for colonic drug delivery. In this method, probiotic cultures of bacteria present in the colonic region were prepared and added to the dissolution media and compared with the performance of conventional dissolution methodologies (such as media with rat cecal and human fecal media). In this study, the predominant species (such as Bacteroides, Bifidobacterium, Lactobacillus species, Eubacterium and Streptococcus) were cultured in 12% w/v skimmed milk powder and 5% w/v grade “A” honey. Approximately 10¹⁰–10¹¹ colony forming units m/L of probiotic culture was added to the dissolution media to test the drug release of polysaccharide-based formulations. A USP dissolution apparatus I/II using a gradient pH dissolution method was used to evaluate drug release from formulations meant for colonic drug delivery. Drug release of guar gum/Eudragit FS30D coated 5-fluorouracil granules was assessed under gastric and small intestine conditions within a simulated colonic environment involving fermentation testing with the probiotic culture. The results with the probiotic system were comparable to those obtained from the rat cecal and human fecal-based fermentation model, thereby suggesting that a probiotic dissolution method can be successfully applied for drug release testing of any polysaccharide-based oral formulation meant for colonic delivery. As such, this study significantly adds to the nanostructured biomaterials’ community by elucidating an easier assay for colonic drug delivery.

Therapeutic efficacy of quercetin enzyme-responsive nanovesicles for the treatment of experimental colitis in rats

Biocompatible quercetin nanovesicles were developed by coating polyethylene glycol-containing vesicles with chitosan and nutriose, aimed at targeting the colon. Uncoated and coated vesicles were prepared using hydrogenated soy phosphatidylcholine and quercetin, a potent natural anti-inflammatory and antioxidant drug. Physicochemical characterization was carried out by light scattering, cryogenic microscopy and X-ray scattering, the results showing that vesicles were predominantly multilamellar and around 130 nm in size. The in vitro release of quercetin was investigated under different pH conditions simulating the environment of the gastrointestinal tract, and confirmed that the chitosan/nutriose coating improved the gastric resistance of vesicles, making them a potential carrier system for colon delivery. The preferential localization of fluorescent vesicles in the intestine was demonstrated using the In Vivo FX PRO Imaging System. Above all, a marked amelioration of symptoms of 2,4,6-trinitrobenzenesulfonic acid-induced colitis was observed in animals treated with quercetin-loaded coated vesicles, favoring the restoration of physiological conditions. Therefore, quercetin-loaded chitosan/nutriose-coated vesicles can represent a valuable therapeutic tool for the treatment of chronic intestinal inflammatory diseases, and presumably a preventive system, due to the synergic action of antioxidant quercetin and beneficial prebiotic effects of the chitosan/nutriose complex.

Design, synthesis and ex-vivo release studies of colon-specific polyphosphazene-anticancer drug conjugates

Colon-specific azo based polyphosphazene-anticancer drug conjugates (11-18) have been synthesized and evaluated by ex-vivo release studies. The prepared polyphosphazene drug conjugates (11-18) are stable in acidic (pH=1.2) buffer which showed that these polymer drug conjugates are protected from acidic environment which is the primary requirement of colon specific targeted drug delivery. The ex-vivo release profiles of polyphosphazene drug conjugates (11-18) have been performed in the presence as well as in the absence of rat cecal content. The results showed that more than 89% of parent drugs (methotrexate and gemcitabine) are released from polymeric backbone of polyphosphazene drug conjugates (14 and 18) having n-butanol (lipophilic moiety). The in-vitro cytotoxicity assay has also been performed which clearly indicated that these polymeric drug conjugates are active against human colorectal cancer cell lines (HT-29 and COLO 320 DM). The drug release kinetic study demonstrated that Higuchi's equation is found to be best fitted equation which showed that release of drug from polymeric backbone as square root of time dependent process based on non-fickian diffusion. Therefore, the synthesized polyphosphazene azo based drug conjugates of methotrexate and gemcitabine are the potential candidates for colon targeted drug delivery system with minimal undesirable side effects.

Design, synthesis and ex vivo evaluation of colon-specific azo based prodrugs of anticancer agents

Colon-specific azo based prodrugs of anticancer agents like methotrexate (6), gemcitabine (7) and analogue of oxaliplatin (RTB-4) (8) were synthesized and characterized by modern analytical techniques. The prepared prodrugs were stable in acidic (pH 1.2) and basic (pH 7.4) buffers which showed their stability in upper GIT environment. Further, an assay was performed which demonstrated the presence of azoreductase enzyme in the rat fecal material, rat cecum content and other parts of intestinal content which reduce specifically the azo bond and release the drug. The in vitro cytotoxicity assay was also performed which clearly indicated that these azo based prodrugs are active against human colorectal cancer cell lines (COLO 205, COLO 320 DM and HT-29). The release behavior of prodrugs (10, 11 and 15) was 60-70% after 24h incubation at 37°C. Therefore, the synthesized azo linked prodrugs of methotrexate, gemcitabine and RTB-4 are the potential candidates for colon targeted drug delivery system with minimal undesirable side effects.

Once daily, high-dose mesalazine controlled-release tablet for colonic delivery: optimization of formulation variables using Box-Behnken design

The aim of this work was to statistically optimize a novel high-dose, mesalazine colonic delivery matrix system, potentially suitable for once daily administration, using simple wet granulation method. A hydrophobic-hydrophilic polymeric blend was used to manipulate drug release. A three-factor, three-level Box-Behnken design was used to construct polynomial models correlating the dependent and independent variables. Independent formulation variables were the percentages of the hydrophilic polymer Carbopol® 940, hydrophobic polymer Eudragit® RS, and the superdisintegrant croscarmellose sodium. The cumulative percentages of drug released at 6, 10, and 14 h were selected as dependent variables and restricted to 7.5-22.5% (Y(1)), 42.5-57.5 % (Y(2)), and 72.5-87.5% (Y(3)), respectively. A second-order polynomial equation fitted to the data was used to optimize the independent formulation variables. Based on Box-Behnken experimental design, different mesalazine release profiles were obtained. The optimized formulation containing 5.72% Carbopol®, 9.77% Eudragit® RS, and 1.45% croscarmellose sodium was prepared according to the software determined levels. It provided a release profile which was very close to the targeted release profile, where the calculated values of f(1) and f(2) were 8.47 and 67.70, respectively, and followed zero-order release kinetics.

An oral colon-targeting controlled release system based on resistant starch acetate: synthetization, characterization, and preparation of film-coating pellets

An oral colon-targeting controlled release system based on resistant starch acetate (RSA) as a film-coating material was developed. The RSA was successfully synthesized, and its digestion resistibility could be improved by increasing the degree of substitution (DS), which was favorable for the colon-targeting purpose. As a delivery carrier material, the characteristics of RSA were investigated by polarized light microscopy, FTIR spectroscopy, and X-ray diffraction. The results revealed a decrease of the crystallinity of RSA and a change of its crystalline structure from B + V hydrid type to V type. To evaluate the colon-targeting release performance, the RSA film-coated pellets loaded with different bioactive components were prepared by extrusion-spheronization and then by fluid bed coating. The effects of the DS, plasticizer content, and coating thickness of the RSA film and those of the content and molecular weight of the loaded bioactive component on the colon-targeting release performance of the resulting delivery system were investigated. By adjusting the DS, the coating thickness, and the plasticizer content of the RSA film, either the pellets loaded with a small molecular bioactive component such as 5-aminosalicylic acid or those with a macromolecular bioactive peptide or protein such as bovine serum albumin, hepatocyte growth-promoting factor, or insulin showed a desirable colon-targeting release performance. The release percentage was less than 12% in simulated upper gastrointestinal tract and went up to 70% over a period of 40 h in simulated colonic fluid. This suggests that the delivery system based on RSA film has an excellent colon-targeting release performance and the universality for a wide range of bioactive components.

Non-coated multiparticulate matrix systems for colon targeting

BACKGROUND

Colon specific drug delivery can significantly improve the efficacy of local treatments of inflammatory bowel diseases. Film coatings containing the starch derivative Nutriose have recently been reported to minimize 5-ASA release in media simulating the upper gastro intestinal tract (GIT), while releasing the drug in a time-controlled manner upon contact with feces from Crohn's Disease and Ulcerative Colitis patients. It was the aim of this study to prepare Nutriose-containing matrix pellets and mini tablets in order to avoid a film coating step.

METHODS

Highly dosed matrix pellets were prepared by extrusion-spheronization, highly dosed mini tablets by compression. Various types of lipids were added and drug release measured in 0.1 N HCl and phosphate buffer pH 6.8, optionally containing pepsin and pancreatin.

RESULTS

The type of added lipid and the preparation technique, in particular the curing conditions, significantly affected the resulting drug release kinetics. Glyceryl palmitostearate containing pellets and mini tablets showed the most promising results upon appropriate curing, minimizing premature drug release in media simulating the upper GIT.

CONCLUSION

The proposed novel multiparticulates do not require a film coating step and show an interesting potential for site-specific drug delivery to the colon of inflammatory bowel disease patients.

Enzymatically degraded Eurylon 6 HP-PG: ethylcellulose film coatings for colon targeting in inflammatory bowel disease patients

Objectives

Film coatings based on blends of Eurylon 6 HP-PG (a hydroxypropylated and pregelatinized high amylose starch) and ethylcellulose were to be evaluated as promising coating materials for site-specific drug delivery to the colon of patients suffering from inflammatory bowel diseases.

Methods

Pellet starter cores containing 60% 5-aminosalicylic acid were prepared by extrusion/spheronization and coated with different Eurylon 6 HP-PG : ethylcellulose blends at various coating levels. Drug release was measured in media simulating the contents of the upper gastrointestinal tract (in the presence and absence of enzymes) as well as in media simulating the contents of the colon.

Key findings

5-Aminosalicylic acid release could effectively be suppressed in 0.1 N HCl and phosphate buffer pH 6.8, optionally containing pepsin or pancreatin, but occurred as soon as the pellets came into contact with culture medium inoculated with faecal samples from inflammatory bowel disease patients. This can be attributed to the partial degradation of the starch derivative by enzymes secreted by bacteria present in the colon of these patients.

Conclusions

The presented drug delivery system is adapted to the pathophysiological conditions in inflammatory bowel disease patients. Furthermore, drug release remained unaltered upon 1 year open storage.

Gastric emptying of multi-particulate dosage forms

The evidence in the literature for the concept that multi-particulate dosage forms below a specific size empty from the stomach as if they were liquids and hence have the potential to provide the best solution to the formulation of controlled release oral dosage forms, has been considered. There is some evidence that particles less than 1.0mm provide a more rapid response than larger size particles but there is also evidence that this is not always the case and that rapid and reproducible gastric emptying of small particles does not always occur when they are administered. There is strong evidence that food can delay the gastric emptying of multi-particulate systems. Some of the misconception for gastric emptying performance of multi-particulate system is shown to be related to the limitation of the study design and limitation of the way the data is processed. Nevertheless, there is clear evidence that multi-particulate systems can provide effective oral controlled release dosage forms. There is still some way to go with experimental techniques which would allow a definitive answer to the issue of how the variability of the gastric emptying of multi-particulate systems of less than 2.0mm arises.