Development of novel fast-dissolving tacrolimus solid dispersion-loaded prolonged release tablet

Development and Evaluation of Tacrolimus Loaded Nano-Transferosomes for Skin Targeting and Dermatitis Treatment

Tacrolimus (TRL) is used for the treatment of atopic dermatitis (AD) due to its T-cell stimulation effect. However, its significantly poor water solubility, low penetration and cytotoxicity have reduced its topical applications. Herein, tacrolimus loaded nano transfersomes (TRL-NTs) were prepared, followed by their incorporation into chitosan gel to prepare tacrolimus loaded nano transfersomal gel (TRL-NTsG). TEM analysis of the TRL-NTs was performed to check their morphology. DSC, XRD and FTIR analysis of the TRL-NTs were executed after lyophilization. Similarly, rheology, spreadability and deformability of the TRL-NTsG were investigated. In vitro release, ex vivo permeation and in vitro interaction of TRL-NTsG with keratinocytes and fibroblasts as well as their co-cultures were investigated along with their in vitro cell viability analysis. Moreover, in vivo skin deposition, ear thickness, histopathology and IgE level were also determined. Besides, 6 months stability study was also performed. Results demonstrated the uniformly distributed negatively charged nanovesicles with a mean particle size distribution of 163 nm and zeta potential of -27 mV. DSC and XRD exhibited the thermal stability and amorphous form of the drug, respectively. The TRL-NTsG showed excellent deformability, spreadability and rheological behavior. In vitro release studies exhibited an 8-fold better release of TRL from the TRL-NTsG. Similarly, 6-fold better permeation and stability of the TRL-NTsG with keratinocytes and fibroblasts as well as their co-cultures was observed. Furthermore, the ear thickness (0.6 mm) of the TRL-NTsG was found significantly reduced when compared with the untreated (1.7 mm) and TRL conventional gel treated mice (1.3 mm). The H&E staining showed no toxicity of the TRL-NTsG with significantly reduced IgE levels (120 ng/mL). The formulation was found stable for at least 6 months. These results suggested the efficacy of TRL in AD-induced animal models most importantly when incorporated in NTsG.

Application of Sucrose Acetate Isobutyrate in Development of Co-Amorphous Formulations of Tacrolimus for Bioavailability Enhancement

The focus of the present work was to develop co-amorphous dispersion (CAD) formulations of tacrolimus (TAC) using sucrose acetate isobutyrate as a carrier, evaluate by in vitro and in vivo methods and compare its performance with hydroxypropyl methylcellulose (HPMC) based amorphous solid dispersion (ASD) formulation. CAD and ASD formulations were prepared by solvent evaporation method followed by characterization by Fourier transformed infrared spectroscopy, X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), dissolution, stability, and pharmacokinetics. XRPD and DSC indicated amorphous phase transformation of the drug in the CAD and ASD formulations, and dissolved more than 85% of the drug in 90 min. No drug crystallization was observed in the thermogram and diffractogram of the formulations after storage at 25 °C/60% RH and 40 °C/75% RH. No significant change in the dissolution profile was observed after and before storage. SAIB-based CAD and HPMC-based ASD formulations were bioequivalent as they met 90% confidence of 90-11.1% for C_max and AUC. The CAD and ASD formulations exhibited C_max and AUC 1.7-1.8 and 1.5-1.8 folds of tablet formulations containing the drug's crystalline phase. In conclusion, the stability, dissolution, and pharmacokinetic performance of SAIB-based CAD and HPMC-based ASD formulations were similar, and thus clinical performance would be similar.

Topotecan-loaded thermosensitive nanocargo for tumor therapy: In vitro and in vivo analyses

This study demonstrates the development of topotecan (TCN) loaded thermosensitive nanocargos (TCN-TS-NC) for intramuscular (IM) administration with enhanced antitumor activity. In this regards, TCN loaded temperature dependent solid lipid nanoparticles (SLNs) were prepared with micro-emulsion method, which were then incorporated into temperature sensitive poloxamer solution to develop TCN-TS-NC. The particle size, entrapment efficiency (%EE), zeta potential and transmission electron microscopy (TEM) analysis of the TCN-TS-NC were performed. Moreover, the inject-ability, release pattern, apoptosis, cellular uptake, pharmacokinetics and antitumor studies of the TCN-TS-NC were attained and compared with TCN solution and TCN-Emulgel (poloxamer solution containing TCN). At room temperature, the TCN loaded SLNs were solid and poloxamer solution remains liquid, however, TCN loaded SLNs melted to liquid and Emulgel converted into gel from, at body temperature, resulting controlled release of the incorporated drug. The TCN-TS-NC showed enhanced cellular uptake and better apoptosis. Similarly, it reduces C_max and sustained its level for a significantly longer time in rats, as compared to the TCN-Emulgel and TCN solution. Moreover, a significantly improved antitumor activity was observed in TCN-TS-NC treated tumor bearing athymic nude mice when compared with the control, TCN solution and TCN-Emulgel applied mice. Thus, the TCN-TS-NC system showed control release of the drug with no initial fast effect. Furthermore, it enhanced the antitumor activity of TCN with comparatively no toxicity. It is therefore concluded that TCN-TS-NC could be a potentially more suitable drug delivery system for the delivery of TCN.

Development, Characterization, and Evaluation of SLN-Loaded Thermoresponsive Hydrogel System of Topotecan as Biological Macromolecule for Colorectal Delivery

BACKGROUND

Chemotherapeutic drugs cause severe toxicities if administered unprotected, without proper targeting, and controlled release. In this study, we developed topotecan- (TPT-) loaded solid lipid nanoparticles (SLNs) for their chemotherapeutic effect against colorectal cancer. The TPT-SLNs were further incorporated into a thermoresponsive hydrogel system (TRHS) (TPT-SLNs-TRHS) to ensure control release and reduce toxicity of the drug. Microemulsion technique and cold method were, respectively, used to develop TPT-SLNs and TPT-SLNs-TRHS. Particle size, polydispersive index (PDI), and incorporation efficiency (IE) of the TPT-SLNs were determined. Similarly, gelation time, gel strength, and bioadhesive force studies of the TPT-SLNs-TRHS were performed. Additionally, in vitro release and pharmacokinetic and antitumour evaluations of the formulation were done.

RESULTS

TPT-SLNs have uniformly distributed particles with mean size in nanorange (174 nm) and IE of ~90%. TPT-SLNs-TRHS demonstrated suitable gelation properties upon administration into the rat's rectum. Moreover, drug release was exhibited in a control manner over an extended period of time for the incorporated TPT. Pharmacokinetic studies showed enhanced bioavailability of the TPT with improved plasma concentration and AUC. Further, it showed significantly enhanced antitumour effect in tumour-bearing mice as compared to the test formulations.

CONCLUSION

It can be concluded that SLNs incorporated in TRHS could be a potential source of the antitumour drug delivery with better control of the drug release and no toxicity.

Fast-Dissolving Solid Dispersions for the Controlled Release of Poorly Watersoluble Drugs

Solid dispersions offer many advantages for oral drug delivery of poorly water-soluble drugs over other systems, including an increase in drug solubility and drug dissolution. An improvement in drug absorption and the higher bioavailability of active pharmaceutical ingredients in the gastrointestinal tract have been reported in various studies. In certain circumstances, a rapid pharmacological effect is required for patients. Fastdissolving solid dispersions provide an ideal formulation in such cases. This report will provide an overview of current studies on fast-dissolving solid dispersions, including not only solid dispersion powders with fast dissolution rates but also specific dose form for the controlled release of poorly water-soluble drugs. Specifically, the applications of fast-dissolving solid dispersions will be described in every specific case. Moreover, pharmaceutical approaches and the utilization of polymers will be summarized. The classification and analysis of fastdissolving solid dispersions could provide insight into strategies and potential applications in future drug delivery developments.

Enhanced solubility and biopharmaceutical performance of atorvastatin and metformin via electrospun polyvinylpyrrolidone-hyaluronic acid composite nanoparticles

The study was aimed to improve the aqueous solubility of atorvastatin (AT) and ameliorate permeability of metformin (MT) in a combination formulation, improving their oral bioavailability. Several AT-MT loaded polyvinylpyrrolidone (PVP) and hyaluronic acid (HA) based nanoparticles were prepared through electrospraying method (ES-NPs), and tested for physicochemical, in vitro, and in vivo parameters. Among the trialed formulations, a sample consisting of AT, MT, PVP, and HA at the weight ratio of 1/6.25/3.75/15 furnished the most satisfying solubility and release rate results. It enhanced approximately 10.3-fold and 3.6-fold solubility of AT as compared with AT powder and marketed product (Lipilow) in phosphate buffer pH = 6.8, respectively. Whereas, permeation of MT was 1.60-fold and 1.47-fold improved as compared with MT powder and marketed product (Glucophage), respectively. As compared with Lipilow, AUC _(0-∞) and C_max of AT with ES-NPs in rats were improved to 3.6-fold and 3.2-fold, respectively. Similarly, as compared with Glucophage, AUC _(0-∞) and C_max of MT were improved to 2.3-fold and 1.8-fold, respectively. Thus, ES-NPs significantly enhanced the solubility of AT (a BCS class II drug) and permeability of MT (a BCS class III drug) and might be a promising drug delivery system for co-delivery of these drugs.

Development of rebamipide-loaded spray-dried microsphere using distilled water and meglumine: physicochemical characterization and pharmacokinetics in rats

In this study, a novel rebamipide-loaded spray-dried microsphere (RSM) with enhanced drug solubility and oral bioavailability has been developed utilizing meglumine, an alkalizing agent. The influence of carriers on the drug solubility alone, and the solubility and dissolution of the drug in the RSM was investigated. Among the alkalizing agents and hydrophilic polymers tested, meglumine and polyvinyl alcohol (PVA) showed the highest drug solubility and dissolution rate, respectively. Many RSMs were manufactured with various amounts of meglumine and PVA using distilled water, and their drug solubility and dissolution were determined. The physicochemical properties, dissolution and pharmacokinetics of the chosen RSM in rats were assessed compared to the rebamipide powder and commercial tablet. Among the RSMs tested, the one composed of rebamipide, meglumine and PVA at a weight ratio of 3:1.75:6 showed the highest drug solubility and dissolution. This RSM with a smooth spherical form significantly decreased the particle size and modified the amorphous rebamipide. Furthermore, the drug solubility, dissolution, plasma concentrations, AUC and C_max values of RSM were significantly higher than those of drug powder and commercial tablet. Thus, this RSN system developed with distilled water and meglumine is recommended as an oral water-soluble rebamipide-loaded pharmaceutical product.

Revaprazan-loaded surface-modified solid dispersion: physicochemical characterization and in vivo evaluation

The purpose of this research was to develop a novel revaprazan-loaded surface-modified solid dispersion (SMSD) with improved drug solubility and oral bioavailability. The impact of carriers on aqueous solubility of revaprazan was investigated. HPMC and Cremophor A25 were selected as an appropriate polymer and surfactant, respectively, due to their high drug solubility. Numerous SMSDs were prepared with various concentrations of carriers, using distilled water, and the drug solubility of each was assessed. Moreover, the physicochemical properties, dissolution and pharmacokinetics of selected SMSD in rats were assessed in comparison to revaprazan powder. Of the SMSDs assessed, the SMSD composed of revaprazan/HPMC/Cremophor A25 at the weight ratio of 1:0.28:1.12 had the most enhanced drug solubility (∼6000-fold). It was characterized by particles with a relatively rough surface, suggesting that the carriers were attached onto the surface of the unchanged crystalline revaprazan powder. It had a significantly higher dissolution rate, AUC and C_max, and a faster T_max value in comparison to revaprazan powder, with a 5.3-fold improvement in oral bioavailability of revaprazan. Therefore, from an environmental perspective, this SMSD system prepared with water, and without organic solvents, should be recommended as a revaprazan-loaded oral pharmaceutical alternative.

Novel revaprazan-loaded gelatin microsphere with enhanced drug solubility and oral bioavailability

To develop a novel revaprazan-loaded gelatine microsphere with enhanced solubility and oral bioavailability, numerous gelatine microspheres were prepared using a spray-drying technique. The impact of gelatine amount on drug solubility in the gelatine microspheres was investigated. The physicochemical properties of the selected gelatine microsphere, such as shape, particle size and crystallinity, were evaluated. Moreover, its dissolution and pharmacokinetics in rats were assessed in comparison with revaprazan powder. Amongst the gelatine microspheres tested, the gelatine microsphere consisting of revaprazan and gelatine (1:2, w/w), which gave about 150-fold increased solubility, had the most enhanced drug solubility. It provided a spherical shape, amorphous drug and reduced particle size. Furthermore, it gave a higher dissolution rate and plasma concentration than did revaprazan powder. Particularly, it gave about 2.3-fold improved oral bioavailability in comparison with revaprazan powder. Therefore, this novel gelatine microsphere system is recommended as an oral pharmaceutical product of poorly water-soluble revaprazan.

Extended tacrolimus release via the combination of lipid-based solid dispersion and HPMC hydrogel matrix tablets

The objective of this study is to evaluate the feasibility of obtaining extended release of tacrolimus by a novel combination of lipid-based solid dispersion and matrix-type extended release tablet techniques. Tacrolimus solid dispersion was prepared using glycerylbehenate (Compritol^® ATO888) and Pluronic F127 as the carrier materials with hot-melt method, which was then blended with hydrogel matrix materials, such as HPMC and lactose, the powders were directly compressed into tablets. In vitro drug release tests were carried out to evaluate the performance of the solid dispersions and the tablets. The dissolution rate of tacrolimus was significantly improved by the lipid-based solid dispersion, and the incorporation of HPC into the solid dispersion obviously improved its stability after storage. Extended release tablets loaded with tacrolimus solid dispersion showed prolonged drug release patterns over 24 h, the release patterns of the tablets can be tailored by the compositions of the matrix materials, including the types and content of HPMCs. A modified processing method that directly mixed the melted solid dispersion with HPMC powders improved the uniformity of the solid dispersion inside the tablet matrix and release profile. The release data of the extended release tablet fitted well to the Korsmeyer–Peppas model with n value of 0.85, which suggested diffusion- and erosion-controlled release mechanism. The combination of lipid-based solid dispersion and HPMC hydrogel matrix may find wide applications in the extended release dosage forms of high potent, water-insoluble drugs.

Comparison of a revaprazan-loaded solid dispersion, solid SNEDDS and inclusion compound: Physicochemical characterisation and pharmacokinetics

The aim of this research was to compare three strategies for enhancing the solubility of poorly water-soluble revaprazan hydrochloride: solid dispersion, solid SNEDDS and inclusion compound. The influence of polymers, surfactants and oils on the drug solubility was assessed, and via the chosen carriers, the three types of formulations were prepared utilising spray drying technique. Their physicochemical properties, solubility, dissolution and pharmacokinetics in rats were performed compared with revaprazan powder. Among the liquid SNEDDS formulations assessed, the compositions of revaprazan, peceol, Tween 80 and Labrasol (10:15:55:30, weight ratio) provided the smallest emulsion size. Moreover, this liquid SNEDDS and dextran were suspended/dissolved in distilled water, and spray-dried, producing an optimal revaprazan-loaded solid SNEDDS. The appropriate solid dispersion and inclusion compound were composed of revaprazan, hydroxypropylmethylcellulose and cremophor A25 (5:1.4:5.6) and drug and hydroxyl-β-cyclodextrin (2.5:8.77), respectively. The crystalline drug was converted to an amorphous state in all formulations. In the solid dispersion, the drug was attached to the hydrophilic carrier. The solid SNEDDS and inclusion compound contained aggregate microspheres and separate microspheres, respectively. All formulations significantly increased the drug solubility, dissolution, plasma concentration and AUC compared with revaprazan powder. These properties were ranked in the order solid dispersion ≥ solid SNEDDS > inclusion compound. Particularly, the solid dispersion improved about 9500-fold drug solubility and 10-fold oral bioavailability. Thus, the improved properties were considerably dependent upon these techniques, although all of the techniques employed similar mechanisms. Among the strategies checked, the solid dispersion system would be recommended as an oral revaprazan-loaded pharmaceutical product.

Development of Aerosol Phospholipid Microparticles for the Treatment of Pulmonary Hypertension

Pulmonary arterial hypertension (PAH) is an incurable cardiovascular disease characterized by high blood pressure in the arteries leading from the heart to the lungs. Over two million people in the USA are diagnosed with PAH annually and the typical survival rate is only 3 years after diagnosis. Current treatments are insufficient because of limited bioavailability, toxicity, and costs associated with approved therapeutics. Aerosol delivery of drugs is an attractive approach to treat respiratory diseases because it increases localized drug concentration while reducing systemic side effects. In this study, we developed phospholipid-based aerosol microparticles via spray drying consisting of the drug tacrolimus and the excipients dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol. The phospholipid-based spray-dried aerosol microparticles were shown to be smooth and spherical in size, ranging from 1 to 3 μm in diameter. The microparticles exhibited thermal stability and were amorphous after spray drying. Water content in the microparticles was under 10%, which will allow successful aerosol dispersion and long-term storage stability. In vitro aerosol dispersion showed that the microparticles could successfully deposit in the deep lung, as they exhibited favorable aerodynamic diameters and high fine particle fractions. In vitro dose-response analysis showed that TAC is nontoxic in the low concentrations that would be delivered to the lungs. Overall, this work shows that tacrolimus-loaded phospholipid-based microparticles can be successfully created with optimal physicochemical and toxicological characteristics.

Irinotecan-loaded double-reversible thermogel with improved antitumor efficacy without initial burst effect and toxicity for intramuscular administration

Intramuscularly administered, anti-tumour drugs induce severe side effects due to their direct contact with body tissues and initial burst effect. In this study, to solve this problem, a novel double-reversible thermogel system (DRTG) for the intramuscular administration of irinotecan was developed. This irinotecan-loaded DRTG was prepared by dispersing the irinotecan-loaded thermoreversible solid lipid nanoparticles (SLNs) in the thermoreversible hydrogel. In DRTG, the former was solid at 25°C but converted to liquid at 36.5°C; in contrast, the latter existed in a liquid form but transformed to gel state in the body. The DRTG was easily administered intramuscularly. Its particle size and drug content were not noticeably changeable, resulting that it was stable at 40°C for at least 6months. Compared to the irinotecan-loaded solution and conventional hydrogel, the DRTG significantly delayed drug release, leading to a reduced burst effect. Moreover, it showed decreased C_max and maintained the sustained plasma concentrations at a relatively low level for the long period of 60h in rats, resulting in ameliorated side effects of the anti-tumour drug. Furthermore, it gave significantly improved anti-tumour efficacy in tumour-bearing mice compared to the hydrogel but, unlike the conventional hydrogel, induced no body weight loss and local damage to the muscle. Thus, this DRTG with improved antitumor efficacy without initial burst effect and toxicity could provide a potential pharmaceutical system for the intramuscular administration of irinotecan.

STATEMENT OF SIGNIFICANCE

Intramuscularly administered, anti-tumour drugs induce severe side effects due to their direct contact with body tissues and initial burst effect. To solve this problem, we developed a novel double-reversible thermogel system (DRTG) for the intramuscular administration of irinotecan. Unlike the conventional hydrogel, the DRTG is a dispersion of the irinotecan-loaded thermoreversible solid lipid nanoparticles in the thermoreversible hydrogel. In DRTG, the former was solid at 25°C but converted to liquid at 36.5°C; in contrast, the latter existed in a liquid form but transformed to gel state in the body. This DRTG gave significantly improved anti-tumour efficacy in tumour-bearing mice compared to the hydrogel but, unlike the conventional hydrogel, induced no body weight loss and local damage to the muscle.

Irinotecan-encapsulated double-reverse thermosensitive nanocarrier system for rectal administration

Intravenously administered for the treatment of rectum cancer, irinotecan produces severe side effects due to very high plasma concentrations. A novel irinotecan-encapsulated double reverse thermosensitive nanocarrier system (DRTN) for rectal administration was developed as an alternative. The DRTN was fabricated by dispersing the thermosensitive irinotecan-encapsulated solid lipid nanoparticles (SLN) in the thermosensitive poloxamer solution. Its gel properties, pharmacokinetics, morphology, anticancer activity and immunohistopathology were assessed after its rectal administration to rats and tumor-bearing mice. In the DRTN, the solid form of the SLN and the liquid form of the poloxamer solution persisted at 25 °C; the former melted to liquid, and the latter altered to gel at 36.5 °C. The DRTN was easily administered to the anus, gelling rapidly and strongly after rectal administration. Compared to the conventional hydrogel and intravenously administered solution, it retarded dissolution and initial plasma concentration. The DRTN gave sustained release and nearly constant plasma concentrations of irinotecan at 1–3 h in rats, resulting in improved anticancer activity. It induced no damage to the rat rectum and no body weight loss in tumor-bearing mice. Thus, this irinotecan-encapsulated DRTN associated with a reduced burst effect, lack of toxicity and excellent antitumor efficacy would be strongly recommended as a rectal pharmaceutical product alternative to commercial intravenous injection in the treatment of rectum and colon cancer.

Solubilization and formulation of chrysosplenol C in solid dispersion with hydrophilic carriers

We investigated how to overcome problems associated with the solubility, dissolution, and oral bioavailability of the poorly water-soluble drug compound, chrysosplenol C (CRSP), as well as the effects of single and binary hydrophilic polymers (PVP K-25 and/or PEG 6000) on the solubility and dissolution parameters of CRSP. Then an optimized formulation was further developed with a surfactant. To select a surfactant suitable for a CRSP-loaded solid dispersion (SD), the solubility of CRSP in distilled water containing 1% surfactant was compared with the solubilities in other surfactants. Sodium lauryl sulfate (SLS) showed the highest drug solubility. Overall, a formulation containing CRSP, binary hydrophilic polymers (PVP and PEG 6000), and SLS at a ratio of 2.0/0.2/1.1/0.7 showed the optimum in vitro release profile. This optimized formulation had better safety properties than pure CRSP in cell viability examinations. SD formulations were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Our optimized SD formulation is expected to improve the bioavailability of CRPS because it improves the solubility and dissolution rate of CRSP.

Taste-masked tacrolimus-phospholipid nanodispersions: dissolution enhancement, taste masking and reduced gastric complications

Through the integration of orthogonal central composite design and desirability function, this work aimed to explore the potential of quality by design in understanding the formulation of phospholipid-stabilized tacrolimus nanodispersions by microfluidization. The influence of homogenization pressure, microfluidization time and phospholipid concentration (X1-X3) on nanodispersion performance was studied. Nanodispersions were characterized by differential scanning calorimetric (DSC), X-ray diffractometer (XRD) and Fourier transform infrared (FTIR) analysis. Moreover, masking the unpalatable taste of tacrolimus and reducing the gastric complications were also evaluated. FTIR analysis indicated its interaction with phospholipid. DSC and XRD analysis revealed the amorphous transformation of tacrolimus within nanodispersions. The dissolution was enhanced by 35 folds and 15 folds after 0.5 and 2 h, respectively. Maximum tacrolimus content, yield, polydispersity index, percentages dissolved after 0.5 and 2 h of 99.3%, 100%, 0.864, 39.7% and 95.3%, respectively, with particle size of 160 nm were obtained at X1, X2 and X3 values of 20 000 psi, 6 min and 30%, respectively. The Euclidean distance values demonstrated masking the unpalatable taste and taste perversion to stimuli of tacrolimus in its optimized nanodispersion. Moreover, the ulcerative indices following raw tacrolimus and its optimized nanodispersion oral administration were 6.73 and 2.45, respectively, to indicate that nanodispersion was significantly less irritating to the gastric mucosa.

Preparation of extended release solid dispersion formulations of tacrolimus using ethylcellulose and hydroxypropylmethylcellulose by solvent evaporation method

Objectives

Tacrolimus is a poorly water-soluble compound that is used to prevent allograft rejection. We aimed to prepare an extended release formulation of tacrolimus to achieve both an extended release profile and improved solubility of tacrolimus.

Methods

Extended release granules (ERG) of tacrolimus were prepared with lactose, ethylcellulose (EC) and hydroxypropylmethylcellulose (HPMC) via the solvent evaporation method.

Key findings

In an in vitro release study, ERG had an extended release profile, and the release rate of tacrolimus was regulated by the quantity of lactose, EC and HPMC in the formulation. HPMC-containing ERG successfully enhanced and maintained supersaturation of tacrolimus even after 24 h in a supersaturated release study. In contrast, the extent of supersaturation rapidly decreased after 4 h and the concentration nearly reached the same level as that of crystalline tacrolimus at 24 h for ERG without HPMC. In vivo absorption characteristics were compared between ERGs and immediate release (IR) formulation of tacrolimus. Successful and sustained absorption of tacrolimus without reducing bioavailability compared with IR formulation was observed for ERG.

Conclusions

These results suggest the feasibility of combining an EC-based formulation with solid dispersion utilizing HPMC for the extended release of oral formulations and sustained absorption of tacrolimus.

Novel electrosprayed nanospherules for enhanced aqueous solubility and oral bioavailability of poorly water-soluble fenofibrate

Purpose

The purpose of the present research was to develop a novel electrosprayed nanospherule providing the most optimized aqueous solubility and oral bioavailability for poorly water-soluble fenofibrate.

Methods

Numerous fenofibrate-loaded electrosprayed nanospherules were prepared with polyvinylpyrrolidone (PVP) and Labrafil^® M 2125 as carriers using the electrospray technique, and the effect of the carriers on drug solubility and solvation was assessed. The solid state characterization of an optimized formulation was conducted by scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopic analyses. Oral bioavailability in rats was also evaluated for the formulation of an optimized nanospherule in comparison with free drug and a conventional fenofibrate-loaded solid dispersion.

Results

All of the electrosprayed nanospherule formulations had remarkably enhanced aqueous solubility and dissolution compared with free drug. Moreover, Labrafil M 2125, a surfactant, had a positive influence on the solubility and dissolution of the drug in the electrosprayed nanospherule. Increases were observed as the PVP/drug ratio increased to 4:1, but higher ratios gave no significant increases. In particular, an electrosprayed nanospherule composed of fenofibrate, PVP, and Labrafil M 2125 at the weight ratio of 1:4:0.5 resulted in a particle size of <200 nm with the drug present in the amorphous state. It demonstrated the highest solubility (32.51±2.41 μg/mL), an excellent dissolution (~85% in 10 minutes), and an oral bioavailability ~2.5-fold better than that of the free drug. It showed similar oral bioavailability compared to the conventional solid dispersion.

Conclusion

Electrosprayed nanospherules, which provide improved solubility and bioavailability, are promising drug delivery tools for oral administration of poorly water-soluble fenofibrate.

Development of a novel solid lipid nanoparticles-loaded dual-reverse thermosensitive nanomicelle for intramuscular administration with sustained release and reduced toxicity

The DRTN was prepared with flurbiprofen-loaded SLNs, poloxamers and water. The suspension transformed into a hydrogel at body temperature. The rheological characterization, release, pharmacokinetics and morphology were evaluated.

Preparation and characterisation of Kolliphor® P 188 and P 237 solid dispersion oral tablets containing the poorly water soluble drug disulfiram

The oral route of administration is the most common and preferred route of drug delivery due to its ease of administration, cost-effectiveness and flexibility in design. However, limited aqueous solubility of the active pharmaceutical ingredient can result in poor bioavailability, which is a major issue for the pharmaceutical industry. Increasing numbers of new drugs are falling into class II of the Biopharmaceutical Classification System (BCS), where they have a low solubility and high tissue permeability, meaning that bioavailability is solubility dependent. Here we demonstrate the development and characterisation of solid dispersion oral tablets, containing the poorly water-soluble drug disulfiram, prepared using both the hot melt and solvent evaporation methods and manufactured from two different polymers, Kolliphor(®) P 188 and P 237, specifically designed for the manufacture of solid dispersions. This paper demonstrates that the disulfiram solid dispersions tablets have an enhanced release rate of disulfiram compared to the control tablets. The Kolliphor(®) P 188 polymer control tablets released approximately 48.8% of their disulfiram content over 8h, with the solvent evaporated tablets releasing approximately 65.8%, while the 60 and 80 °C hot melt tablets released approximately 73.2 and 100% of their disulfiram content respectively. A similar trend was seen with Kolliphor(®) P 237 as the control tablets released approximately 50.5% of their disulfiram content over 8h, while the solvent evaporated tablets released approximately 79.5% and the 60 and 80 °C hot melt tablets released 100.2 and 100.3% respectively. Depending on what method and polymer is used to manufacture the solid dispersions the disulfiram is either maintained completely or partially in its amorphous state and it is this which enhances its solubility and release rate from the tablets. The disulfiram in the Kolliphor(®) P 188 solvent evaporated and 60 °C hot melt tablets retained 50.5 and 44.1% of its crystallinity, while the disulfiram in the 80 °C hot melt tablets was completely amorphous. Whereas the disulfiram in the Kolliphor(®) P 237 solvent evaporated tablets retained 45.2% crystallinity, while the disulfiram in both of the hot melt tablets was completely in its amorphous form.