Exploiting polymer blending approach for fabrication of buccal chitosan-based composite sponges with augmented mucoadhesive characteristics

Nature-Inspired Wet Drug Delivery Platforms

Nature has created various organisms with unique chemical components and multi-scale structures (e.g., foot proteins, toe pads, suckers, setose gill lamellae) to achieve wet adhesion functions to adapt to their complex living environments. These organisms can provide inspirations for designing wet adhesives with mediated drug release behaviors in target locations of biological surfaces. They exhibit conformal and enhanced wet adhesion, addressing the bottleneck of weaker tissue interface adhesion in the presence of body fluids. Herein, it is focused on the research progress of different wet adhesion and bioinspired fabrications, including adhesive protein-based adhesion and inspired adhesives (e.g., mussel adhesion); capillarity and Stefan adhesion and inspired adhesive surfaces (e.g., tree frog adhesion); suction-based adhesion and inspired suckers (e.g., octopus' adhesion); interlocking and friction-based adhesion and potential inspirations (e.g., mayfly larva and teleost adhesion). Other secreted protein-induced wet adhesion is also reviewed and various suckers for other organisms and their inspirations. Notably, one representative application scenario of these bioinspired wet adhesives is highlighted, where they function as efficient drug delivery platforms on target tissues and/or organs with requirements of both controllable wet adhesion and optimized drug release. Finally, the challenges of these bioinspired wet drug delivery platforms in the future is presented.

Chitosan-based intelligent polymeric networks for site-specific colon medication delivery: A comprehensive study on controlled release of diloxanide furoate and network formation dynamics

Oral medications are prone to gastric degradation and enzymatic inactivation, diminishing their efficacy. This study investigates a solution by developing intelligent polymeric networks, incorporating chitosan, methacrylic acid, N, N, methylene bisacrylamide, and montmorillonite clay, to enable the controlled release of Diloxanide Furoate (DF), an anti-protozoal drug. Employing a swelling-assisted diffusion technique, drug loading percentages varied from 63.96 % to 76.82 % among different formulations. Increased chitosan and methacrylic acid content enhanced drug loading, while N, N, methylene bisacrylamide and montmorillonite clay demonstrated an inverse relationship affecting diffusion and swelling. Equilibrium swelling studies unveiled formulation-dependent behaviors, with chitosan reducing swelling and methacrylic acid promoting it. Higher N, N, methylene bisacrylamide concentrations decreased swelling, indicating a denser cross-linked structure, while montmorillonite clay reduced hydrophilicity and swelling capacity. Further analyses confirmed successful gel formation, particularly in formulations with higher chitosan, methacrylic acid, and N, N, methylene bisacrylamide content, while montmorillonite clay limited gel fraction due to restricted polymer chain mobility. Techniques such as Fourier transform infrared spectroscopy, Differential scanning calorimetry, and thermal gravimetric analyses supported network development, enhancing thermal stability and cross-linking density. This research underscores the flexibility of polymeric networks for precise drug delivery, offering potential advancements in targeted therapies for various medical conditions.

Chitosan-Based Polymer Blends for Drug Delivery Systems

Polymers have been widely used for the development of drug delivery systems accommodating the regulated release of therapeutic agents in consistent doses over a long period, cyclic dosing, and the adjustable release of both hydrophobic and hydrophilic drugs. Nowadays, polymer blends are increasingly employed in drug development as they generate more promising results when compared to those of homopolymers. This review article describes the recent research efforts focusing on the utilization of chitosan blends with other polymers in an attempt to enhance the properties of chitosan. Furthermore, the various applications of chitosan blends in drug delivery are thoroughly discussed herein. The literature from the past ten years was collected using various search engines such as ScienceDirect, J-Gate, Google Scholar, PubMed, and research data were compiled according to the various novel carrier systems. Nanocarriers made from chitosan and chitosan derivatives have a positive surface charge, which allows for control of the rate, duration, and location of drug release in the body, and can increase the safety and efficacy of the delivery system. Recently developed nanocarriers using chitosan blends have been shown to be cost-effective, more efficacious, and prolonged release carriers that can be incorporated into suitable dosage forms.

Evaluation of photodynamic therapy on nanoparticles and films loaded-nanoparticles based on chitosan/alginate for curcumin delivery in oral biofilms

Nanoparticles and nanoparticle-loaded films based on chitosan/sodium alginate with curcumin (CUR) are promising strategies to improve the efficacy of antimicrobial photodynamic therapy (aPDT) for the treatment of oral biofilms. This work aimed to develop and evaluate the nanoparticles based on chitosan and sodium alginate encapsulated with CUR dispersed in polymeric films associated with aPDT in oral biofilms. The NPs were obtained by polyelectrolytic complexation, and the films were prepared by solvent evaporation. The photodynamic effect was evaluated by counting Colony Forming Units (CFU/mL). Both systems showed adequate characterization parameters for CUR release. Nanoparticles controlled the release of CUR for a longer period than the nanoparticle-loaded films in simulated saliva media. Control and CUR-loaded nanoparticles showed a significant reduction of 3 log10 CFU/mL against S. mutans biofilms, compared to treatment without light. However, biofilms of S. mutans showed no photoinactivation effect using films loaded with nanoparticles even in the presence of light. These results demonstrate the potential of chitosan/sodium alginate nanoparticles associated with aPDT as carriers for the oral delivery of CUR, offering new possibilities to improve the treatment of dental caries and infections. This work will contribute to advances in the search for innovative delivery systems in dentistry.

Novel mucoadhesive celecoxib-loaded cubosomal sponges: Anticancer potential and regulation of myeloid-derived suppressor cells in oral squamous cell carcinoma

Oral squamous-cell carcinoma (OSCC) is a widespread health problem. Myeloid-derived suppressor cells (MDSCs) are major tumor microenvironment (TME) population that govern many carcinogenesis aspects by establishing immunosuppressive milieu favoring tumor aggressiveness and treatment resistance. Cyclooxygenase-2 (COX-2) regulates MDSCs activity, hence, COX-2-selective inhibition by celecoxib (CXB) showed good anticancer effect at relatively high doses with possible subsequent cardiovascular complications. Therefore, targeted CXB delivery to MDSCs may represent a promising OSCC treatment strategy. Novel mucoadhesive-cubosomal buccal sponges were prepared for MDSCs targeting and were evaluated for their in-vitro quality attributes, ex-vivo mucoadhesion using buccal chicken-mucosa. Optimally-selected formulation showed considerable uptake by CD33⁺/11b⁺MDSCs in human OSCC cell-line (SCC-4) when quantitatively analyzed by flow-cytometry and examined using confocal-laser microscope. Optimum formulations loaded with low CXB doses (12 mg) were promoted to in-vivo studies via local application, using 4-nitroquinoline-1-oxide-induced OSCC in rats, and compared to their corresponding CXB gels. SP16 revealed the highest ability to decrease MDSC activation, recruitment and TME-immunosuppression in the isolated tumors. Consequently, SP16 exerted the greatest capacity to reduce histologic tumor grade, the OSCC-specific serum tumor markers levels, cancer hallmarks and stemness markers. CXB-loaded cubosomal sponges preferentially target MDSCs with noticeable anticancer potential and may exemplify novel mucoadhesive nanocarriers for OSCC treatment.

Evaluating Novel Agarose-Based Buccal Gels Scaffold: Mucoadhesive and Pharmacokinetic Profiling in Healthy Volunteers

Agarose (AG) forms hydrocolloid in hot water and possesses a noteworthy gel strength. However, no reasonable scientific work on investigating the mucoadhesive character of AG has been reported. Therefore, the current study was designed to develop AG and carbopol (CP) based buccal gel scaffold for simultaneous release of benzocaine (BZN) and tibezonium iodide (TIB). Gels’ scaffold formulations (F1−F12) were prepared with varied concentrations (0.5−1.25% w/v) of AG and CP alone or their blends (AG-CP) using homogenization technique. The prepared formulations were characterized for solid-state, physicochemical, in vitro, ex vivo, and in vivo mucoadhesive studies in healthy volunteers. The results showed that mucoadhesive property of AG was concentration dependent but improved by incorporating CP in the scaffolds. The ex vivo mucoadhesive time reached >36 h when AG was used alone or blended with CP at 1% w/v concentration or above. The optimized formulation (F10) depicted >98% drugs release within 8 h and was also storage stable up to six months. The salivary concentration of BZN and TIB from formulation F10 yielded a Cmax value of 9.97 and 8.69 µg/mL at 2 and 6 h (tmax), respectively. In addition, the FTIR, PXRD, and DSC results confirmed the presence of no unwanted interaction among the ingredients. Importantly, the mucoadhesive study performed on healthy volunteers did not provoke any signs of inflammation, pain, or swelling. Clearly, it was found from the results that AG-CP scaffold provided better mucoadhesive properties in comparison to pure AG or CP. Conclusively, the developed AG based mucoadhesive drug delivery system could be considered a potential alternative for delivering drugs through the mucoadhesive buccal route.

Preparation and characterization of a hydroxypropyl methylcellulose based wafer for simultaneous delivery of phenytoin and insulin as wound dressing material

In this study, a novel wafer based on Hydroxypropyl methylcellulose (HPMC) was prepared as a wound dressing for the simultaneous delivery of phenytoin (PT) and insulin; evaluation of the cutaneous wound repair property was performed too. Due to its low water solubility, PT was encapsulated in polymeric micelles (PM) by the film hydration method at different polymer/drug ratios and characterized in terms of particle size (PS), polydispersity index (PdI), zeta potential (ZP), drug loading (DL) %, entrapment efficiency (EE) %, and drug release. Then, the optimized PT loaded PM (PT-PM) was embedded in the wafers prepared from the HPMC polymer, alone or in combination with Carbopol 940 (CB) and xanthan gum (XG). This wafer also contained a fixed amount of insulin (PT-PM-Insulin-wafer). The obtained wafers were evaluated in terms of morphology, water uptake ability, porosity, bioadhesion and hardness features. Finally, the efficacy of the PT-PM-Insulin-wafer was assessed in full-thickness excision wound models. The optimized PT-PM showed the PS of 84.05 ± 1.80 nm, PdI of 0.28 ± 0.22, ZP of -3.38 ± 0.26 mV, DL of 15.63 ± 0.01%, EE of 92.66 ± 0.08%, and the release efficiency of 59.95 ± 0.03%. The results obtained from the XRD studies of PT-PM also demonstrated the transition of the crystalline nature of the PT to the amorphous form, while FTIR studies showed some intermolecular interaction of PT and the Soluplus® copolymer chain. It was also found that the incorporation of XG into HPMC wafers influenced the microstructure, thus increasing the porosity, water uptake ability and bioadhesion. Compared with other groups, the PT-PM-Insulin-wafer group showed the enhancement of wound closure through increasing collagen deposition and re-epithelialization. The present study, therefore, revealed that the PT-PM-Insulin-wafer group might have very promising applications for wound healing.

Differential Drug Release Kinetics from Paclitaxel-Loaded Polydioxanone Membranes and Capsules

BACKGROUND

Drug laden implantable systems can provide drug release over several hours to years, which eventually aid in the therapy of both acute and chronic diseases. The present study focuses on a fundamental evaluation of the influence of implant properties such as morphology, architecture, porosity, surface area, and wettability in regulating the drug release kinetics from drug-loaded polymeric matrices.

METHODS

For this, Polydioxanone (PDS) was selected as the polymer and Paclitaxel (Ptx) as the model drug. Two different forms of the matrix implants, viz., reservoir type capsules developed by dip coating and matrix type membranes fabricated by phase inversion and electrospinning, were utilized for the study. Drug release from all the four different matrices prepared by simple techniques was evaluated in vitro in PBS and ex vivo in peritoneal wash fluid for ~4 weeks. The drug release profiles were thereafter correlated with the physicochemical parameters of the polymeric implants.

RESULTS

Reservoir-type capsules followed a slow and steady zero-order kinetics, while matrix-type electrospun and phase inversion membranes displayed typical biphasic kinetics.

CONCLUSION

It was inferred that the slow degradation rate of PDS polymer as well as the implant properties like porosity and wettability play an important role in controlling the drug release rates.

Management of recurrent aphthous ulcers exploiting polymer-based Muco-adhesive sponges: in-vitro and in-vivo evaluation

Recurrent aphthous ulcer (RAU) is a well-known painful, inflammatory disease with uncertain etiology for which local symptomatic therapy is only available. The aim of this study was to formulate and characterize muco-adhesive sponges containing a mixture of tenoxicam and miconazole nitrate to manage pain, inflammation and avoid candida infection that may accompany RAU due to poor oral hygiene. Two polymers at different concentrations were used to prepare sponges applying simple freeze-drying. Medicated chitosan (2%) sponges (mC2) showed acceptable physical appearance, surface pH (6.3 ± 0.042), porosity (25.7% ± 1.8), swelling index (5.7 ± 0.11), in-vivo and ex-vivo muco-adhesion time (115 min.±0.813 and 155 min.±1.537, respectively), ex-vivo muco-adhesion force (0.09 N ± 0.002) and scanning electron microscope (SEM) images. For concurrent clear-cut determination of tenoxicam and miconazole nitrate from mC2, a new UPLC method was developed and validated. mC2 sponges exhibited superior in-vitro drug release profiles where ∼100% of tenoxicam released within 5 min for fast pain relief with a more prolonged miconazole nitrate release. Furthermore, in-vivo animal study revealed that mC2 caused a significant decrease in the acetic acid-induced ulcer size in rats after 6 days of treatment (p < .0001) compared to negative and positive controls. Additionally, histopathological examination showed faster healing with complete restoration of the normal oral histology in rats. The present study concludes that chitosan sponge loaded with a combination of tenoxicam and miconazole nitrate could improve healing of RAU cases.

In vitro evaluation of adhesion and mechanical properties of oral thin films

Oral drug delivery is often challenged with enzymatic degradation of drug molecules in the gastrointestinal tract and high first-pass metabolism, resulting in low bioavailability. Delivery of drug molecules via the oral cavity mucosa is considered a viable option to enhance bioavailability. One of the relatively new dosage forms for transmucosal drug delivery is the oral thin film (OTF) with mucoadhesive properties that offers several advantages over conventional dosage forms, including faster dissolution, higher patient compliance, and extended oral retention by reduced salivary washout. Mucoadhesive OTFs should have sufficient muco-adhesiveness as well as suitable mechanical properties for their best performance, thus such characterization is critical in the successful design and development of OTFs. However, there is currently no FDA or USP-recommended analytical procedure or standard available for evaluating adhesiveness and mechanical properties of mucoadhesive OTFs. Therefore, we aimed to develop a fast and reliable in vitro method capable of differentiating various OTFs in terms of their adhesive strengths using a texture analyzer. We found that an in vitro gel substrate composed of 4% w/v gellan gum and 2% w/v glycerin could be used to discriminate between the adhesive features of the tested film samples. Also, our studies show that the adhesion test parameters of 0.96 N target force, probe speed of 0.1 mm/s, holding time of 15 s, and conditioning medium volume of 200 μL while using the said substrate could successfully differentiate between the adhesion strength of the OTF samples. We further examined the film samples for their physicomechanical properties to obtain a tangible and practical range of mechanical values for pharmaceutical OTFs using the puncture test and folding endurance test. We found a breaking factor above 34.5 N/mm, elongation to puncture less than 5.55% and folding endurance of at least 50 folds can be used as a starting point when designing and manufacturing OTFs.

Preclinical evaluation of methotrexate-loaded polyelectrolyte complexes and thermosensitive hydrogels as treatment for rheumatoid arthritis

This work proposes new methotrexate (MTX) loaded drug delivery systems (DDS) to treat rheumatoid arthritis via the intra-articular route: a poloxamer based thermosensitive hydrogel (MTX-HG), oligochitosan and hypromellose phthalate-based polyelectrolyte complexes (MTX-PEC) and their association (MTX-PEC-HG). MTX-PEC showed 470 ± 166 nm particle size, 0.298 ± 0.108 polydispersity index, +26 ± 2 mV and 74.3 ± 5.8% MTX efficiency entrapment and particle formation was confirmed by infrared spectroscopy and thermal analysis. MTX-HG and MTX-PEC-HG gelled at 36.7°C. MTX drug release profile was prolonged for MTX-HG and MTX-PEC-HG, and faster for MTX-PEC and free MTX. The in vivo effect of the MTX-DDSs systems was evaluated in induced arthritis rats as single intra-articular dose. The assessed parameters were the mechanical nociceptive threshold, the plasmatic IL-1β level and histological analysis of the tibiofemoral joint. MTX-HG and MTX-PEC-HG performance were similar to free MTX and worse than oral MTX, used as positive control. All DDSs showed some irritative effect, for which further studies are required. MTX-PEC was the best treatment on recovering cartilage damage and decreasing allodynia. Thus, MTX-PEC demonstrated potential to treat rheumatoid arthritis, with the possibility of decreasing the systemic exposure to the drug.

Freeze-Dried Matrices Composed of Degradable Polymers with Surfactant-Loaded Microparticles Based on Pectin and Sodium Alginate

Gelatin/polyvinylpyrrolidone/hydroxyethyl cellulose/glycerol porous matrices with microspheres made of sodium alginate or pectin and sodium alginate were produced. A surfactant was loaded into these microparticles. The microspheres were characterized using optical microscopy, scanning electron microscopy SEM, and laser diffraction particle size analyzer. For the matrices, the density, porosity, swelling capacity, dissolution in phosphate saline buffer were determined and SEM, mechanical, and thermogravimetric studies were applied. The results showed that the size of the two-component microspheres was slightly larger than that of single-ingredient microparticles. The images confirmed the spherical shape of the microparticles. The prepared matrices had high water uptake ability and porosity due to the presence of hydrophilic polymers. The presence of microparticles in the matrices caused a decrease in these parameters. Degradation of the composites with the microspheres was significantly faster than the matrix without them. The addition of microparticles increased the stiffness and toughness of the prepared materials. The efficiency of the thermal decomposition main stage was reduced in the samples with microspheres, whereas a char residue increased in these composites.

Advances in regulating physicochemical properties of mesoporous silica nanocarriers to overcome biological barriers

Mesoporous silica nanoparticles (MSNs) with remarkable structural features have been proven to be an excellent platform for the delivery of therapeutic molecules. Biological barriers in various forms (e.g., mucosal barrier, cellular barrier, gastrointestinal barrier, blood-brain barrier, and blood-tumor barrier) present substantial obstacles for MSNs. The physicochemical parameters of MSNs are known to be effective and tunable not only for load and release of therapeutic molecules but also for their biological responsiveness that is beneficial for cells and tissues. This review innovatively provides a description of how and why physicochemical properties (e.g., particle size, morphology, surface charge, hydrophilic-hydrophobic property, and surface modification) of MSNs influence their ability to cross the biological barriers prior to reaching targeted sites. First, the structural and physiological features of biological barriers are outlined. Next, the recent progresses in the critical physicochemical parameters of MSNs are highlighted from physicochemical and biological aspects. Surface modification, as an important strategy for achieving rapid transport, is also reviewed with special attention to the latest findings of bioactive groups and molecular mechanisms. Furthermore, advanced designs of multifunction intelligent MSNs to surmount the blood-tumor barrier and to actively target tumor sites are demonstrated in detail. Lastly, the biodegradability and toxicity of MSNs are evaluated. With perspectives for their potential application and biosafety, the clues in summary might lead to drug delivery with high efficiency and provide useful knowledge for rational design of nanomaterials.

Freeze-Dried Matrices for Buccal Administration of Propranolol in Children: Physico-Chemical and Functional Characterization

Buccal matrices represent a widely accepted dosage form permitting a convenient, easy, reliable drug administration and reducing administration errors. The aim of this study was the development of mucoadhesive buccal matrices for propranolol administration in children. Matrices were obtained by freeze-drying of drug loaded polymeric solutions based on gum tragacanth (GT), pectin (PEC), hydroxypropylmethylcellulose (HPMC), sodium hyaluronate (HA), gelatin (GEL), chitosan (CH) or a mixture of CH and HPMC (CH/HPMC). Matrices were characterized for drug solid state, morphology, water-uptake, mucoadhesion ability, in vitro drug release and permeation through porcine epithelium. The most promising formulations were tested for in vitro biocompatibility in human dental pulp fibroblasts. The preparative method and the polymeric composition influenced the drug solid state, as a complete amorphization as well as different polymorphic forms were observed. GEL and PEC guaranteed a fast and complete drug release due to their rapid dissolution, while for the other matrices the release was influenced by drug diffusion through the viscous gelled matrix. Moreover, matrices based on CH and CH/HPMC showed the best mucoadhesive properties, favoured the drug permeation, in virtue of CH ability to interfere with the lipid organization of biological membrane, and were characterized by a good biocompatibility profile.

Carboxymethyl cellulose-based wafer enriched with resveratrol-loaded nanoparticles for enhanced wound healing

The present study aimed to prepare and investigate the wound healing potential of carboxymethyl cellulose (CMC)-based wafers incorporated with resveratrol (RSV)-loaded cellulose acetate butyrate (CAB) NPs. Accordingly, RSV-CAB NPs were prepared using the solvent evaporation method. The effect of different formulation parameters (polymer content, surfactant concentration, and the volume ratio of aqueous phase to organic phase) on the properties of NPs was investigated using the Box-Behnken design. Then, the optimized NPs were incorporated in wafers comprising CMC combined with hydroxyl propyl methyl cellulose (HPMC) or chitosan. Hydration capacity, porosity, adhesive strength, and hardness of the prepared nanocomposite wafers were examined. Optimized formulation was spherical, showing the particle size, polydispersity index, zeta potential, encapsulation efficiency %, drug loading %, and release efficiency % of 248.5 nm, 0.38, - 1.59, 87.58, 25.94, and 67.10, respectively. The CMC-HPMC wafers exhibited higher porosity, hydration capacity, and adhesive performance, as compared with the CMC wafers alone and CMC-chitosan wafers. Wound healing test and histological evaluation in the excisional wounds of the rats showed that the RSV-NPs-wafers were more effective as a healing accelerator, in comparison to wafers without drug or those containing the free RSV. These results demonstrated the potential of the RSV-NPs-wafer in wound healing drug delivery applications. Graphical abstract.

Unidirectional drug release from 3D printed mucoadhesive buccal films using FDM technology: In vitro and ex vivo evaluation

Oromucosal delivery of active pharmaceutical ingredients provides an attractive alternative route of administration, due to avoidance of the first pass effect and improved patient compliance. In the current work, fused deposition modelling (FDM) 3D printing was investigated as an additive manufacturing approach for poly(vinyl alcohol)-based mucoadhesive films, enabling unidirectional drug release. For this purpose, chitosan was incorporated as a permeation and mucoadhesion enhancer whereas ethylcellulose and commercial wafer sheets were evaluated as backing layers. The formulated films were initially assessed for structural integrity and dose uniformity. Solid-state characterization of the films, including thermal methods (DSC, TGA), diffraction (XRPD) and Raman spectroscopy, was implemented to characterize the physicochemical properties of the produced polymeric filaments and buccal films. The mechanical properties of the products were investigated by instrumented indentation and tensile tests. Evaluation of buccal films was assessed in vitro, to study the effect of backing-layer type on hydration capacity of the films, diffusion of the drug throughout the restricting layer and release profiles in simulated saliva. The ex vivo performance of the manufactured products, associated with the presence of chitosan, was investigated by textural analysis for mucoadhesion properties, whereas permeation studies and histological studies were performed across porcine buccal epithelium. The results demonstrated that FDM printing is a timesaving and versatile approach in the context of manufacturing multi-layered mucoadhesive buccal films, providing unidirectional release properties.

Lysozyme Mucoadhesive Tablets Obtained by Freeze-Drying

Lysozyme is particularly attractive for the local treatment of oral pathologies related to microbiological infections. However, the requirement of a prolonged release is difficult to achieve because of saliva swallowing and of the protein denaturation which can occur during production and storage of a dosage form. This work demonstrates the feasibility to prepare lysozyme mucoadhesive tablets by freeze-drying. Tablets were prepared by using alginate (ALG) physically "cross-linked" with calcium ion and different grades of hydroxypropyl methylcellulose (HPMC) (i.e., E5, E50, or K100). The tablets were characterized in terms of swelling or erosion behavior, in vitro mucoadhesive properties, lysozyme activity (Micrococcus lysodeikticus), drug release and ability to inactivate Staphylococcus aureus. The formulations prepared with HPMC K100 were discarded because of the fast erosion. All other formulations allowed a sustained release over at least 6 h. Independently of composition, lysozyme activity (78,311 ± 1873 Units/mg) significantly decreased in the case of tablets containing 5% and 10% w/w of protein (55,000 Units/mg and 33,000 Units/mg, respectively). Conversely, no modifications occurred in the case of tablets containing 1% w/w lysozyme. The formulation prepared by ALG/HPMC E5 7/3 ratio was efficacious against S. aureus. After 3 months of storage at 5 ± 3°C, no significant decrease in lysozyme activity was observed.

Liquid crystalline nanoreservoir releasing a highly skin-penetrating berberine oleate complex for psoriasis management

Aim: The current work highlighted preparation of highly penetrating liquid crystalline nanoparticulates (LCNPs) reservoir of a solubility modified berberine oleate (Brb-OL) complex for effective psoriasis management. Materials & methods: Brb-OL-loaded LCNPs (Brb-OL-LCNPs) were prepared using hydrotrope method. Results: The proposed Brb-OL-LCNPs showed a particle size of 137 ± 3.7 nm and negative ζ-potential (-38 ± -5.85 mV). Brb-OL-LCNPs showed a threefold increase in the drug accumulated within rat skin and around tenfold increase in the drug permeation compared with crude Brb. In vivo studies revealed that topical application of Brb-OL-LCNPs hydrogel significantly alleviated psoriasis symptoms and reduced the levels of psoriatic inflammatory cytokines. Conclusion: Formulating Brb-OL in the LCNPs controlled the release, retention and permeation of the drug across skin layers, which are of prime importance for psoriasis management.

Freeze-Dried Matrices Based on Polyanion Polymers for Chlorhexidine Local Release in the Buccal and Vaginal Cavities

Chlorhexidine (CLX) is a wide spectrum cationic antimicrobial used for prevention and treatment of infections of buccal and vaginal cavities. To increase the residence time of CLX-based formulations at the application site and consequently reduce the daily dose frequency, new formulations composed of mucoadhesive polymers should be designed. The objective of this work was the development of matrices based on polyanionic polymers, such as sodium alginate, carboxymethylcellulose, xanthan gum and sodium hyaluronate, aimed to prolong the local release of CLX into the buccal or vaginal cavity. Matrices were prepared by freeze-drying and comply with 2 different preparative methods and characterized in terms of resistance to compression, water uptake ability, mucoadhesion, in vitro drug release behavior and antimicrobial activity toward representative pathogens of buccal and vaginal cavities. Results showed that the selection of suitable polymers associated to the adequate preparative method allowed to modulate matrix ability to hydrate, adhere to the mucosa and release the drug as well as to exert antimicrobial activity. In particular, matrix based on sodium hyaluronate was found to be the best performing formulation and could represent a versatile system for local release of CLX with potential application in both buccal and vaginal cavities.

Combining hydrophilic chemotherapy and hydrophobic phytotherapy via tumor-targeted albumin-QDs nano-hybrids: covalent coupling and phospholipid complexation approaches

BACKGROUND

The rationale of this study is to combine the merits of both albumin nanoparticles and quantum dots (QDs) in improved drug tumor accumulation and strong fluorescence imaging capability into one carrier. However, premature drug release from protein nanoparticles and high toxicity of QDs due to heavy metal leakage are among challenging hurdles. Following this platform, we developed cancer nano-theranostics by coupling biocompatible albumin backbone to CdTe QDs and mannose moieties to enhance tumor targeting and reduce QDs toxicity. The chemotherapeutic water soluble drug pemetrexed (PMT) was conjugated via tumor-cleavable bond to the albumin backbone for tumor site-specific release. In combination, the herbal hydrophobic drug resveratrol (RSV) was preformulated as phospholipid complex which enabled its physical encapsulation into albumin nanoparticles.

RESULTS

Albumin-QDs theranostics showed enhanced cytotoxicity and internalization into breast cancer cells that could be traced by virtue of their high fluorescence quantum yield and excellent imaging capacity. In vivo, the nanocarriers demonstrated superior anti-tumor effects including reduced tumor volume, increased apoptosis, and inhibited angiogenesis in addition to non-immunogenic response. Moreover, in vivo bioimaging test demonstrated excellent tumor-specific accumulation of targeted nanocarriers via QDs-mediated fluorescence.

CONCLUSION

Mannose-grafted strategy and QD-fluorescence capability were beneficial to deliver albumin nanocarriers to tumor tissues and then to release the anticancer drugs for killing cancer cells as well as enabling tumor imaging facility. Overall, we believe albumin-QDs nanoplatform could be a potential nano-theranostic for bioimaging and targeted breast cancer therapy.

Protein-polysaccharide nanohybrids: Hybridization techniques and drug delivery applications

Complex nanosystems fabricated by hybridization of different types of materials such as lipids, proteins, or polysaccharides are usually superior to simple ones in terms of features and applications. Proteins and polysaccharides hold great potential for development of nanocarriers for drug delivery purposes based on their unique biocompatibility, biodegradability, ease of functionalization, improved biodistribution and minimal toxicity profiles. Protein-polysaccharide nanohybrids have gained a lot of attention in the past few years particularly for drug delivery applications. In this review, different hybridization techniques utilized in the fabrication of such nanohybrids including electrostatic complexation, Maillard conjugation, chemical coupling and electrospinning were thoroughly reviewed. Moreover, various formulation factors affecting the characteristics of the formed nanohybrids were discussed. We also reviewed in depth the outcomes of such hybridization ranging from stability enhancement, to toxicity reduction, improved biocompatibility, and drug release modulation. We also gave an insight on their limitations and what hinders their clinical translation and market introduction.

Development and in vitro evaluation of chitosan based system for local delivery of atorvastatin for treatment of periodontitis

In recent years, statin group drugs have been widely investigated in treatment of periodontal diseases due to their anti-inflammatory effect. The efficacy of statins can be enhanced by local administration into the periodontal pocket by appropriate delivery systems. The aim of our study was to develop a bioadhesive delivery system for local delivery of atorvastatin in treatment of periodontal disease. For this purpose, gel formulations were prepared using different types of chitosan (base and water soluble) and viscosity, bioadhesivity and syringeability of the gels as well as in vitro drug release properties were investigated vitro. Furthermore, anti-inflammatory effect of the formulations was studied in vitro using tumor necrosis factor (TNF)-alfa induced human gingival fibroblast (hGF) cells. Release of proinflammatory (IL-1β, IL-6, IL-8) and anti-inflammatory (TGF-β1, TGF-β2, TGF-β3, IL-10) cytokines were measured after incubating the hGF cells with the formulations. The viscosity of the formulations was found to be suitable for a local application into periodontal pocket. In presence of drug, bioadhesive property of the formulations was found to increase, and bioadhesion force was within the range, which would retain the delivery system at the application site, subsequently maintain drug levels at desired amount for longer period of time. The release of atorvastatin from the gels was found to be slower than that of the solution. The cytokine levels were found to decrease following application of the formulations, and anti-inflammatory effect was observed to enhance in presence of chitosan. No significant differences were found between base and water-soluble chitosan.