Could the small molecules such as amino acids improve aqueous solubility and stabilize amorphous systems containing Griseofulvin?

Maximizing Aqueous Drug Encapsulation: Small Nanoparticles Formation Enabled by Glycopolymers Combining Glucose and Tyrosine

Highly potent heterocyclic drugs are frequently poorly water soluble, leading to limited or abandoned further drug development. Nanoparticle technology offers a powerful delivery approach by enhancing the solubility and bioavailability of hydrophobic therapeutics. However, the common usage of organic solvents causes unwanted toxicity and process complexity, therefore limiting the scale-up of nanomedicine technology for clinical translation. Here, we show that an organic-solvent-free methodology for hydrophobic drug encapsulation can be obtained using polymers based on glucose and tyrosine. An aqueous solution based on a tyrosine-containing glycopolymer is able to dissolve solid dasatinib directly without adding an organic solvent, resulting in the formation of very small nanoparticles of around 10 nm loaded with up to 16 wt % of drug. This polymer is observed to function as both a drug solubilizer and a nanocarrier at the same time, offering a simple route for the delivery of insoluble drugs.

Occurrence and Health Risks of Organic Micropollutants in Tap Water in Dalian

Organic micropollutants (OMPs) in tap water may pose risks to human health. Previous studies on the potential health risks of OMPs in tap water may have underestimated the potential health risks of OMPs due to their limited coverage in target pollutants and incomplete toxicity data. In this study, tap water samples were collected in 37 sampling sites in Dalian, China. More than 1,200 target pollutants were screened by combining screening analysis and target analysis. A total of 93 OMPs were detected, with concentration summation ranging from 157 to 1.7 × 104 ng/L among different sampling sites. A total of 17 OMPs (12 agrochemicals, 3 pharmaceuticals and personal care products, and 2 other compounds) were detected in over 80% of the sampling sites. Especially, imidacloprid, tebuconazole, and atrazine-desethyl were found in all the sampling sites. Computational toxicology models were adopted to predict the missing toxicity threshold values of the identified chemicals. Noncarcinogenic risks were estimated to be negligible among all the sampling sites, while carcinogenic risks at six sites were above 10-6 but below 10-4, indicating non-negligible risks. Griseofulvin contributed the most to the carcinogenic risk. This study offers valuable insights that can guide future initiatives to safeguard tap water safety.

Mechanistic insight into gel formation of co-amorphous resveratrol and piperine during dissolution process

Different from previous co-amorphous systems, co-amorphous resveratrol and piperine (namely RES-PIP CM) showed much lower dissolution in comparison to the original two crystalline drugs owing to its gel formation during dissolution. The purpose of this study is to investigate the mechanism of gel formation and seek strategies to eliminate such gelation. It was found that the dissolution performance of RES-PIP CM and the properties of formed gels were significantly affected by the medium temperature and stoichiometric ratio of components. Multiple characterization results confirmed that the gelation process underwent the decrease of T_g caused by water plasticization, and then entered into its supercooled liquid state with high viscosity, accompanied by self-assembly of molecules. Furthermore, the study answered the question that whether such gelation of RES-PIP CM could be eliminated by porous carrier materials. The materials, mesoporous silica (MES) and attapulgite (ATT), provided barrier and well separation between molecules and particles of RES-PIP CM by the pore steric hindrance, and impeded the self-assembly and aggregation, hence achieving the degelation and dissolution improvement. The present study highlights the importance of recognizing gelation potential of some co-amorphous formulations, and provides an effective strategy to eliminate gelation in developing high quality co-amorphous drug products.

Pharmaceutical Systems as a Strategy to Enhance the Stability of Oxytetracycline Hydrochloride Polymorphs in Solution

In order to improve the stability of oxytetracycline hydrochloride, a polymorphic antibiotic set of novel binary systems were developed using β-cyclodextrin and amino acids with different acid-basic characteristics as ligands. The formation constants for each system containing β-cyclodextrin, L-aspartic acid, histidine and N-acetylcysteine were determined by Scott's method and statistical studies. The structure of the binary systems with β-cyclodextrin and N-acetylcysteine was elucidated by NMR experiments. The effect β-cyclodextrin and N-acetylcysteine on the polymorph's chemical stability in aqueous and phosphate buffered saline solutions at 25 °C was monitored by an optimized and validated high-performance liquid chromatography method. The combination of N-acetylcysteine with the three polymorphs and the β-cyclodextrin system obtained with the form III demonstrated a reduction in the degradation rate of oxytetracycline hydrochloride in the aqueous solution when compared to each free form, with an increase of 20 h in the half time. It evidences that the use of amino acids as ligands constitutes an interesting alternative for pharmaceutical areas. In conclusion, based on the results obtained, these pharmaceutical systems could be candidates for the development of a pharmaceutical formulation for the administration of the drug through reconstituted solutions using the binary system as a promising tool for improving the stability of oxytetracycline hydrochloride polymorphs in solution.

Mechanical Activation by Ball Milling as a Strategy to Prepare Highly Soluble Pharmaceutical Formulations in the Form of Co-Amorphous, Co-Crystals, or Polymorphs

Almost half of orally administered active pharmaceutical ingredients (APIs) have low solubility, which affects their bioavailability. In the last two decades, several alternatives have been proposed to modify the crystalline structure of APIs to improve their solubility; these strategies consist of inducing supramolecular structural changes in the active pharmaceutical ingredients, such as the amorphization and preparation of co-crystals or polymorphs. Since many APIs are thermosensitive, non-thermal emerging alternative techniques, such as mechanical activation by milling, have become increasingly common as a preparation method for drug formulations. This review summarizes the recent research in preparing pharmaceutical formulations (co-amorphous, co-crystals, and polymorphs) through ball milling to enhance the physicochemical properties of active pharmaceutical ingredients. This report includes detailed experimental milling conditions (instrumentation, temperature, time, solvent, etc.), as well as solubility, bioavailability, structural, and thermal stability data. The results and description of characterization techniques to determine the structural modifications resulting from transforming a pure crystalline API into a co-crystal, polymorph, or co-amorphous system are presented. Additionally, the characterization methodologies and results of intermolecular interactions induced by mechanical activation are discussed to explain the properties of the pharmaceutical formulations obtained after the ball milling process.

Effect of Vehicle Composition on the Preparation of Different Types of Dapsone Crystals for Topical Drug Delivery

Topical formulations composed of API-pure crystals have been increasingly studied, especially in regards to the impact of particle size in penetration efficiency. Less attention, however, has been devoted to the solid-state properties of drugs delivered to the skin. In this study, we address the effect of formulation composition on the crystal form existing in topical products. Dapsone (DAP) gel formulations were prepared by mixing an organic solution containing DAP with an aqueous solution containing polymers and preservatives. The organic solvent was chosen as ethoxydiglycol (DEGEE), polyethylene glycol (PEG), or 1-methyl-2-pirrolidone (MPR) to assess the impact of composition on DAP crystal form. Such solvent variations resulted in different particulate matter. In terms of crystalline nature, the presence of DEGEE in formulations induced the crystallization of DAP hydrate, while PEG cocrystal and a mixture of hydrate and MPR solvate crystallized from the same amounts of PEG and MPR, respectively. Microscopic analysis of the gels showed heterogeneous particles with different characteristics. The behavior of gels after application to the skin was also tested. Interestingly, the different formulations seemed to accumulate in different regions of the skin. This could be the result of the effect of vehicle composition/excipients on the characteristics of the skin, such as hydration. The site-specific accumulation, however, was more pronounced in crystal-loaded gels as opposed to blank formulations. These results indicate that future studies should consider the effect of formulation composition on the API crystal form landscape as part of the strategies used to successfully target drug delivery to the skin.

Mechanistic insight into gel-induced aggregation of amorphous curcumin during dissolution process

Amorphous curcumin (CUR) exhibited a decreased dissolution rate in comparison with the crystalline counterpart due to its gel formation during dissolution. The main purpose of the present study is to explore the mechanism of such gelation phenomenon. It was found that the dissolution of amorphous CUR and gel properties were influenced by the temperature and pH of the media. The formed gels were characterized by TPA, SEM, DSC, XRPD, FTIR and PLM. The results indicated that the gelation process led to the formation of a porous structure in which water molecules infiltrate, and entered into its supercooled liquid state with high viscosity when contacting aqueous media, accompanied by decreased T_g and crystalline transformation. In addition, mixing with hydrophilic excipients (such as hydrophilic silica) accelerated the gel formation of amorphous CUR, while the addition of hydrophobic excipients (such as hydrophobic silica and magnesium stearate) could effectively weaken and even eliminate the gelation, hence significantly improving its dissolution. Furthermore, according to contact angle measurement and fluorescence microscope observation, hydrophilic excipients were found to be able to accelerate water entering into the interior of amorphous CUR, hence facilitating the gelation, while hydrophobic excipients would hinder water infiltration into the powder and thus achieve degelation. In conclusion, it is important to recognize that the gelation potential of some amorphous materials should be considered in developing robust amorphous drug product of high quality and performance.

Amino acids and its pharmaceutical applications: A mini review

Amino acids are natural compounds that can be safely used in pharmaceutical applications. Considering the great interest in the amino acids used in the pharmaceutical industry, this article presents an overview of investigations reported in recent years. In this regard, the first sections begin with an introductory description of the properties, classification and safety of amino acids, while in the other sections the most common methods for the preparation of amino acids formulations and their application on solubilization, permeation and stabilization of several active pharmaceutical ingredients are described. Furthermore, available data about the multicomponent systems approach is included. Lastly, the impact of amino acids formulations on therapeutic efficacy is explored. The advantages illustrated suggest that amino acids are capable of improving the biopharmaceutical properties of drugs.

Deaggregation and Crystallization Inhibition by Small Amount of Polymer Addition for a Co-Amorphous Curcumin-Magnolol System

Different from previously reported co-amorphous systems, a co-amorphous curcumin-magnolol (CUR-MAG CM) system, as compared with its crystalline counterparts, exhibited decreased dissolution due to its aggregation during dissolution. The main purpose of the present study is to deaggregate CUR-MAG CM to optimize drug dissolution and explore the deaggregation mechanism involved. Herein, a small amount of polymer (HPMC, HPC, and PVP K30) was co-formulated at 5% (w/w) with CUR-MAG CM as ternary co-amorphous systems. The polymer addition changed the surface properties of CUR-MAG CM including improved water wettability enhanced surface free energy, and hence exerted a deaggregating effect. As a result, the ternary co-amorphous systems showed faster and higher dissolution as compared with crystalline CUR/MAG and CUR-MAG CM. In addition, the nucleation and crystal growth of dissolved CUR and MAG molecules were significantly inhibited by the added polymer, maintaining a supersaturated concentration for a long time. Furthermore, polymer addition increased the T_g of CUR-MAG CM, potentially involving molecular interactions and inhibiting molecular mobility, resulting in enhanced physical stability under 25 °C/60% RH and 40 °C/75% RH conditions. Therefore, this study provides a promising strategy to optimize the dissolution and physical stability of co-amorphous systems by deaggregation and crystallization inhibition via adding small amounts of polymers.

Recent Technologies for Amorphization of Poorly Water-Soluble Drugs

Amorphization technology has been the subject of continuous attention in the pharmaceutical industry, as a means to enhance the solubility of poorly water-soluble drugs. Being in a high energy state, amorphous formulations generally display significantly increased apparent solubility as compared to their crystalline counterparts, which may allow them to generate a supersaturated state in the gastrointestinal tract and in turn, improve the bioavailability. Conventionally, hydrophilic polymers have been used as carriers, in which the amorphous drugs were dispersed and stabilized to form polymeric amorphous solid dispersions. However, the technique had its limitations, some of which include the need for a large number of carriers, the tendency to recrystallize during storage, and the possibility of thermal decomposition of the drug during preparation. Therefore, emerging amorphization technologies have focused on the investigation of novel amorphous-stabilizing carriers and preparation methods that can improve the drug loading and the degree of amorphization. This review highlights the recent pharmaceutical approaches utilizing drug amorphization, such as co-amorphous systems, mesoporous particle-based techniques, and in situ amorphization. Recent updates on these technologies in the last five years are discussed with a focus on their characteristics and commercial potential.

Considerations for the selection of co-formers in the preparation of co-amorphous formulations

Co-amorphous drug delivery systems are evolving as a credible alternative to amorphous solid dispersions technology. In Co-amorphous systems (CAMs), a drug is stabilized in amorphous form using small molecular weight compounds called as co-formers. A wide variety of small molecular weight co-formers have been leveraged in the preparation of CAMs. The stability and supersaturation potential of prepared co-amorphous phases largely depend on the type of co-former employed in the CAMs. However, the rationality behind the co-former selection in co-amorphous systems is poorly understood and scarcely compiled in the literature. There are various facets to the rational selection of co-former for CAMs. In this context, the present review compiles various factors affecting the co-former selection. The factors have been broadly classified under Thermodynamic, Kinetic and Pharmacokinetic-Pharmacologically relevant parameters. In particular, the importance of Glass transition, Miscibility, Liquid-Liquid phase separation (LLPS), Crystallization inhibition has been deliberated in detail.

Eutectic mixtures as an approach to enhance solubility, dissolution rate and oral bioavailability of poorly water-soluble drugs

Eutectic mixtures have been known for a long time in the pharmaceutical field. However, its potential as a system to improve the solubility and dissolution of poorly water-soluble drugs remains little explored. Studies involving the microstructural characterization and the preparation of solid dosage forms containing eutectic mixtures are also an issue to be developed. Recently, the number of studies involving the preparation of eutectic mixtures to improve the solubility and oral bioavailability of poorly soluble drugs has increased considerably, including drug-carrier and drug-drug mixtures. In this review is discussed the potential of eutectic mixtures as an alternative pharmaceutical solid system to enhance drugs solubility, dissolution rate or oral bioavailability. Different aspects like history, physico-chemical, microstructural properties, preparation methods, mechanisms involved in solubility/dissolution enhancement, techniques for solid state characterization, in vivo studies, advantages, limitations and formulation perspective are also discussed.