1
|
Remedio LN, Garcia VADS, Rochetti AL, Berretta AA, Ferreira JA, Fukumasu H, Vanin FM, Yoshida CMP, de Carvalho RA. Oral Films Printed with Green Propolis Ethanolic Extract. Polymers (Basel) 2024; 16:1811. [PMID: 39000666 PMCID: PMC11243841 DOI: 10.3390/polym16131811] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Revised: 05/17/2024] [Accepted: 05/21/2024] [Indexed: 07/17/2024] Open
Abstract
Oral film (OF) research has intensified due to the effortless administration and advantages related to absorption in systemic circulation. Chitosan is one of the polymers widely used in the production of OFs; however, studies evaluating the maintenance of the active principles' activity are incipient. Propolis has been widely used as an active compound due to its different actions. Printing techniques to incorporate propolis in OFs prove to be efficient. The objective of the present study is to develop and characterize oral films based on chitosan and propolis using printing techniques and to evaluate the main activities of the extract incorporated into the polymeric matrix. The OFs were characterized in relation to the structure using scanning and atomic force electron microscopy; the mechanical properties, disintegration time, wettability, and stability of antioxidant activity were evaluated. The ethanolic extract of green propolis (GPEE) concentration influenced the properties of the OFs. The stability (phenolic compounds and antioxidant activity) was reduced in the first 20 days, and after this period, it remained constant.
Collapse
Affiliation(s)
- Leandro Neodini Remedio
- Faculty of Animal Science and Food Engineering, USP—University of São Paulo, Av. Duque de Caxias Norte 225, Pirassununga 13635-900, SP, Brazil; (L.N.R.); (A.L.R.); (H.F.); (F.M.V.)
| | - Vitor Augusto dos Santos Garcia
- Faculty of Agricultural Sciences, UNESP—São Paulo State University, José Barbosa de Barros 1780, Botucatu 18610-034, SP, Brazil;
| | - Arina Lazaro Rochetti
- Faculty of Animal Science and Food Engineering, USP—University of São Paulo, Av. Duque de Caxias Norte 225, Pirassununga 13635-900, SP, Brazil; (L.N.R.); (A.L.R.); (H.F.); (F.M.V.)
| | - Andresa Aparecida Berretta
- Research, Development & Innovation Department, Apis Flora Industrial e Comercial Ltda, Rua Triunfo 945, Ribeirão Preto 14020-670, SP, Brazil;
| | - Julieta Adriana Ferreira
- FHO—Hermínio Ometto Foundation, Av. Doutor Maximiliano Baruto 500, Araras 13607-339, SP, Brazil;
| | - Heidge Fukumasu
- Faculty of Animal Science and Food Engineering, USP—University of São Paulo, Av. Duque de Caxias Norte 225, Pirassununga 13635-900, SP, Brazil; (L.N.R.); (A.L.R.); (H.F.); (F.M.V.)
| | - Fernanda Maria Vanin
- Faculty of Animal Science and Food Engineering, USP—University of São Paulo, Av. Duque de Caxias Norte 225, Pirassununga 13635-900, SP, Brazil; (L.N.R.); (A.L.R.); (H.F.); (F.M.V.)
| | - Cristiana Maria Pedroso Yoshida
- Institute of Environmental, Chemical and Pharmaceutical Sciences, UNIFESP—Federal University of São Paulo, Rua São Nicolau 210, Diadema 09913-030, SP, Brazil;
| | - Rosemary Aparecida de Carvalho
- Faculty of Animal Science and Food Engineering, USP—University of São Paulo, Av. Duque de Caxias Norte 225, Pirassununga 13635-900, SP, Brazil; (L.N.R.); (A.L.R.); (H.F.); (F.M.V.)
| |
Collapse
|
2
|
Patil A, Nangare S, Mahajan P, Jain P, Zawar L. Chitosan and neem gum-based polyelectrolyte complex for design of allantoin loaded biocomposite film: In-vitro, ex-vivo, and in-vivo characterization. Int J Biol Macromol 2024; 263:130280. [PMID: 38378120 DOI: 10.1016/j.ijbiomac.2024.130280] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Revised: 02/10/2024] [Accepted: 02/16/2024] [Indexed: 02/22/2024]
Abstract
Presently, the preference for chitosan (CS) and gum polysaccharides in biomedical applications including drug delivery and wound healing has been extensively documented. Despite this, the demerits of CS and gum polysaccharides such as poor mechanical properties, degradation rate, swelling, etc., limit their applications for designing biocomposite films for drug delivery. Therefore, the anticipated work aims to design a CS and neem gum polysaccharides (NGP) polyelectrolyte complex-based allantoin (AT)-loaded (CS/NGP-AT) biocomposite film for improved wound healing. In brief, CS, NGP, and CS/NGP-AT-based biocomposite films were prepared using the solvent-casting method, and in-vitro, ex-vivo, and in-vivo characterizations were performed to assess the performance of these biocomposite films compared to their counterparts. In this, diffractogram and thermogram analysis assured the conversion of crystalline AT into an amorphous form. The optimized CS/NGP/AT-3 formulation exhibited controlled water absorption, appropriate water uptake capacity, good water retention ability, excellent water vapor transmission rate, controlled degradation rate, enhanced mechanical properties, cell and blood biocompatibility, etc. Furthermore, it offered improved antimicrobial, anti-inflammatory, and antioxidant potential. The optimized film provided a modified release (88.3 ± 0.3 %) of AT from the film for up to 48 h. Wound healing experiments on rats and their histopathology studies confirmed a significantly higher rate of wound recovery within 14 days compared to the control and CS/NGP film, attributable to the combined effects of CS, NGP, and AT. In conclusion, the fabricated CS/NGP-based biocomposite film presents promising prospects as an excellent candidate for wound healing applications.
Collapse
Affiliation(s)
- Amol Patil
- Department of Pharmaceutics, H. R. Patel Institute of Pharmaceutical Education and Research, Shirpur 425405, Maharashtra State, India
| | - Sopan Nangare
- Department of Pharmaceutics, H. R. Patel Institute of Pharmaceutical Education and Research, Shirpur 425405, Maharashtra State, India
| | - Pooja Mahajan
- Department of Pharmaceutics, H. R. Patel Institute of Pharmaceutical Education and Research, Shirpur 425405, Maharashtra State, India
| | - Pankaj Jain
- Department of Pharmacology, R. C. Patel Institute of Pharmaceutical Education and Research, Shirpur 425405, Maharashtra State, India
| | - Laxmikant Zawar
- Department of Pharmaceutics, H. R. Patel Institute of Pharmaceutical Education and Research, Shirpur 425405, Maharashtra State, India.
| |
Collapse
|
3
|
Hassan AAA, Kristó K, Ibrahim YHEY, Regdon G, Sovány T. Quality by Design-Guided Systematic Development and Optimization of Mucoadhesive Buccal Films. Pharmaceutics 2023; 15:2375. [PMID: 37896135 PMCID: PMC10610159 DOI: 10.3390/pharmaceutics15102375] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2023] [Revised: 09/18/2023] [Accepted: 09/21/2023] [Indexed: 10/29/2023] Open
Abstract
Mucoadhesive buccal films have found increased popularity in pharmaceutical drug delivery due to the several advantages that they possess. The present study strives to develop and optimize chitosan-based mucoadhesive buccal films by relying on quality-by-design (QbD) principles. Previous knowledge and experience were employed to firstly identify the critical quality attributes (CQAs), followed by a thorough risk assessment, which led to the selection of seven critical material attributes and process parameters, namely, the polymer grade and concentration, the plasticizer type and concentration, the citric acid (CA) concentration, the amount of the casted solution, and the drying condition. Their effects on the breaking hardness and mucoadhesivity, selected as CQAs, were investigated in three steps by three designs of the experiment (DoE). The medium molecular weight of chitosan (CH) was the preferred choice in the optimized formulation, and its concentration was the most important factor affecting the CQAs, thickness, and moisture content of the films. It was found that 0.364 g/cm2 was the suitable amount of the casting solution, and its optimum drying conditions were presented in the form of a design space. Glycerol (Gly) was the best choice as a plasticizer, and a design space representing several combinations of CH and CA concentrations that produce films with the required quality was constructed at a fixed concentration of 35% Gly. A formula from this design space was selected and employed to load with two model drugs to test its drug-carrying properties for drugs with different physicochemical characteristics. Uniform drug distribution with an immediate release profile was achieved in both drugs, although one of the CQAs was outside of the specifications in the case of lidocaine-containing film. To summarize, the obtention of the optimum mucoadhesive buccal film based on CH was efficiently facilitated by the rational application of QbD principles and the DoE approach.
Collapse
Affiliation(s)
- Alharith A. A. Hassan
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (A.A.A.H.)
- Department of Pharmaceutics, Faculty of Pharmacy, University of Khartoum, Khartoum P.O. Box 321, Sudan
| | - Katalin Kristó
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (A.A.A.H.)
| | - Yousif H.-E. Y. Ibrahim
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (A.A.A.H.)
- Pharmaceutics Department, Omdurman Islamic University, Omdurman P.O. Box 382, Sudan
| | - Géza Regdon
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (A.A.A.H.)
| | - Tamás Sovány
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (A.A.A.H.)
| |
Collapse
|
4
|
Pamlényi K, Regdon G, Jójárt-Laczkovich O, Nemes D, Bácskay I, Kristó K. Formulation and characterization of pramipexole containing buccal films for using in Parkinson's disease. Eur J Pharm Sci 2023:106491. [PMID: 37301240 DOI: 10.1016/j.ejps.2023.106491] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2022] [Revised: 05/15/2023] [Accepted: 06/05/2023] [Indexed: 06/12/2023]
Abstract
Parkinson's disease (PD) is neurodegenerative chronic illness which affects primarily the elderly over 45 years of age. The symptoms can be various, both non-motor and motor symptoms can appear. The biggest problem in the treatment of the disease is the difficulty in swallowing for the patients. However, buccal patches can solve this problem because the patients do not have to swallow the dosage form, and during application, the API can absorb from the area of the buccal mucosa quickly without causing a foreign body sensation. In our present study, we focused on the development of buccal polymer films with pramipexole dihydrochloride (PR). Films with different compositions were formulated and their mechanical properties and chemical interactions were investigated. The biocompatibility of the film compositions was examined on the TR146 buccal cell line. The permeation of PR was also monitored across the TR146 human cell line. It can be stated that the plasticizer can enhance the thickness and the breaking hardness of the films, while not decreasing their mucoadhesivity significantly. All formulations proved to have cell viability higher than 87%. Finally, we found the best composition (3% SA+1% GLY-PR-Sample1) which can be applied on the buccal mucosa in the treatment of PD.
Collapse
Affiliation(s)
- Krisztián Pamlényi
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary
| | - Géza Regdon
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary.
| | - Orsolya Jójárt-Laczkovich
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary
| | - Dániel Nemes
- Department of Pharmaceutical Technology, University of Debrecen, Nagyerdei krt. 98., H-4032 Debrecen, Hungary
| | - Ildikó Bácskay
- Department of Pharmaceutical Technology, University of Debrecen, Nagyerdei krt. 98., H-4032 Debrecen, Hungary
| | - Katalin Kristó
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary
| |
Collapse
|
5
|
Vlad RA, Pintea A, Coaicea M, Antonoaea P, Rédai EM, Todoran N, Ciurba A. Preparation and Evaluation of Caffeine Orodispersible Films: The Influence of Hydrotropic Substances and Film-Forming Agent Concentration on Film Properties. Polymers (Basel) 2023; 15:polym15092034. [PMID: 37177181 PMCID: PMC10181256 DOI: 10.3390/polym15092034] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2023] [Revised: 04/18/2023] [Accepted: 04/24/2023] [Indexed: 05/15/2023] Open
Abstract
This study aimed to develop caffeine (CAF) orodispersible films (ODFs) and verify the effects of different percentages of film-forming agent and hydrotropic substances (citric acid-CA or sodium benzoate-SB) on various film properties. Hydroxypropyl methylcellulose E 5 (HPMC E 5) orodispersible films were prepared using the solvent casting method. Four CAF-ODF formulations were prepared and coded as CAF1 (8% HPMC E 5, CAF), CAF2 (8% HPMC E 5 and CAF:CA-1:1), CAF3 (9% HPMC E 5 and CAF:CA-1:1), and CAF4 (9% HPMC E 5 and CAF:SB-1:1). The CAF-ODFs were evaluated in terms of disintegration time, folding endurance, thickness, uniformity of mass, CAF content, thickness-normalized tensile strength, adhesiveness, dissolution, and pH. Thin, opaque, and slightly white CAF-ODFs were obtained. All the formulations developed exhibited disintegration times less than 3 min. The dissolution test revealed that CAF1, CAF2, and CAF3 exhibited concentrations of active pharmaceutical ingredients (APIs) released at 30 min that were close to 100%, whilst CAF4 showed a faster dissolution behaviour (100% of the CAF was released at 5 min). Thin polymeric films containing 10 mg of CAF/surface area (3.14 cm2) were prepared.
Collapse
Affiliation(s)
- Robert-Alexandru Vlad
- Pharmaceutical Technology and Cosmetology Department, Faculty of Pharmacy, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38th Gheorghe Marinescu Street, 540142 Targu Mures, Romania
| | - Andrada Pintea
- Targu Mures Clinical County Hospital, 6th Bernady Gyorgy Street, 540072 Targu Mures, Romania
| | - Mădălina Coaicea
- Catena Hygeia Darmanesti, 1st Muncii Street, 605300 Bacau, Romania
| | - Paula Antonoaea
- Pharmaceutical Technology and Cosmetology Department, Faculty of Pharmacy, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38th Gheorghe Marinescu Street, 540142 Targu Mures, Romania
| | - Emőke Margit Rédai
- Pharmaceutical Technology and Cosmetology Department, Faculty of Pharmacy, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38th Gheorghe Marinescu Street, 540142 Targu Mures, Romania
| | - Nicoleta Todoran
- Pharmaceutical Technology and Cosmetology Department, Faculty of Pharmacy, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38th Gheorghe Marinescu Street, 540142 Targu Mures, Romania
| | - Adriana Ciurba
- Pharmaceutical Technology and Cosmetology Department, Faculty of Pharmacy, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38th Gheorghe Marinescu Street, 540142 Targu Mures, Romania
| |
Collapse
|
6
|
Ferreira M, Gomes D, Neto M, Passarinha LA, Costa D, Sousa Â. Development and Characterization of Quercetin-Loaded Delivery Systems for Increasing Its Bioavailability in Cervical Cancer Cells. Pharmaceutics 2023; 15:pharmaceutics15030936. [PMID: 36986797 PMCID: PMC10058887 DOI: 10.3390/pharmaceutics15030936] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2023] [Revised: 03/07/2023] [Accepted: 03/12/2023] [Indexed: 03/16/2023] Open
Abstract
Quercetin is a natural flavonoid with high anticancer activity, especially for related-HPV cancers such as cervical cancer. However, quercetin exhibits a reduced aqueous solubility and stability, resulting in a low bioavailability that limits its therapeutic use. In this study, chitosan/sulfonyl-ether-β-cyclodextrin (SBE-β-CD)-conjugated delivery systems have been explored in order to increase quercetin loading capacity, carriage, solubility and consequently bioavailability in cervical cancer cells. SBE-β-CD/quercetin inclusion complexes were tested as well as chitosan/SBE-β-CD/quercetin-conjugated delivery systems, using two types of chitosan differing in molecular weight. Regarding characterization studies, HMW chitosan/SBE-β-CD/quercetin formulations have demonstrated the best results, which are obtaining nanoparticle sizes of 272.07 ± 2.87 nm, a polydispersity index (PdI) of 0.287 ± 0.011, a zeta potential of +38.0 ± 1.34 mV and an encapsulation efficiency of approximately 99.9%. In vitro release studies were also performed for 5 kDa chitosan formulations, indicating a quercetin release of 9.6% and 57.53% at pH 7.4 and 5.8, respectively. IC50 values on HeLa cells indicated an increased cytotoxic effect with HMW chitosan/SBE-β-CD/quercetin delivery systems (43.55 μM), suggesting a remarkable improvement of quercetin bioavailability.
Collapse
Affiliation(s)
- Miguel Ferreira
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
| | - Diana Gomes
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
- Associate Laboratory i4HB—Institute for Health and Bioeconomy, NOVA School of Science and Technology, Universidade NOVA, 2819-516 Caparica, Portugal
- UCIBIO—Applied Molecular Biosciences Unit, Departament of Chemistry, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
| | - Miguel Neto
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
| | - Luís A. Passarinha
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
- Associate Laboratory i4HB—Institute for Health and Bioeconomy, NOVA School of Science and Technology, Universidade NOVA, 2819-516 Caparica, Portugal
- UCIBIO—Applied Molecular Biosciences Unit, Departament of Chemistry, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
- Laboratório de Fármaco-Toxicologia-UBIMedical, Universidade da Beira Interior, 6200-284 Covilhã, Portugal
| | - Diana Costa
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
| | - Ângela Sousa
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal
- Correspondence: ; Tel.: +351-275-329-052
| |
Collapse
|
7
|
Ghataty DS, Amer RI, Wasfi R, Shamma RN. Novel linezolid loaded bio-composite films as dressings for effective wound healing: experimental design, development, optimization, and antimicrobial activity. Drug Deliv 2022; 29:3168-3185. [PMID: 36184799 PMCID: PMC9543119 DOI: 10.1080/10717544.2022.2127974] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2022] Open
Abstract
Biphasic release bio-composite films of the low water-soluble drug, linezolid (LNZ), were formulated using the solvent casting technique. Different polymers and plasticizers (gelatin, Tween 80, polyethylene glycol 400, and glycerol) were assessed for the preparation of bio-composite films. An I-optimal design was applied for the optimization and to study the impact of polymer concentration (X1), plasticizer concentration (X2), polymer type (X3), and plasticizer type (X4) on different LNZ-loaded bio-composite films. The film thickness, moisture content, mechanical properties, swelling index, and percentage of drug release at fixed times opted as dependent variables. Results demonstrated a significant effect of all independent variables on the drug release from the prepared bio-composite films. The plasticizer concentration significantly increased the thickness, moisture content, elongation at break, swelling index, and in vitro drug release and significantly reduced the tensile strength. The optimized LNZ-loaded bio-composite film comprised of 15% Tween 80 and 30% PEG 400 was highly swellable, elastic, acceptable tensile properties, safe, maintained a moist environment, and indicated great antimicrobial activity against both Staphylococcus aureus (ATCC® 25922) and methicillin-resistant Staphylococcus aureus (MRSA), which are common wound infectious bacteria. The present study concludes that the optimized LNZ-loaded bio-composite film was successfully designed with fast drug release kinetics and it could be regarded as a promising novel antimicrobial wound dressing formulation.
Collapse
Affiliation(s)
- Dina Saeed Ghataty
- Department of Pharmaceutics, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), Giza, Egypt
| | - Reham Ibrahim Amer
- Department of Pharmaceutics, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), Giza, Egypt,Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmacy, Al-Azhar University, Cairo, Egypt
| | - Reham Wasfi
- Department of Microbiology and Immunology, October University for Modern Sciences and Arts (MSA), Giza, Egypt
| | - Rehab Nabil Shamma
- Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Cairo University, Cairo, Egypt,CONTACT Rehab Nabil Shamma
| |
Collapse
|
8
|
Mucoadhesive carriers for oral drug delivery. J Control Release 2022; 351:504-559. [PMID: 36116580 PMCID: PMC9960552 DOI: 10.1016/j.jconrel.2022.09.024] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2022] [Revised: 09/10/2022] [Accepted: 09/12/2022] [Indexed: 12/24/2022]
Abstract
Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.
Collapse
|
9
|
Chitosan-based films with alternative eco-friendly plasticizers: Preparation, physicochemical properties and stability. Carbohydr Polym 2022; 301:120277. [DOI: 10.1016/j.carbpol.2022.120277] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Revised: 10/17/2022] [Accepted: 10/26/2022] [Indexed: 11/19/2022]
|
10
|
Razali S, Bose A, Benetti C, Win Chong P, Miller M, Colombo P, Colombo G, Wui Wong T. Advanced Dome cellulose/alginate/chitosan composite matrix design with gastric and intestinal co-targeting capacities. Int J Pharm 2022; 628:122226. [PMID: 36191818 DOI: 10.1016/j.ijpharm.2022.122226] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2022] [Revised: 08/30/2022] [Accepted: 09/18/2022] [Indexed: 10/31/2022]
Abstract
Dome matrix was designed with gastric and intestinal targeting capacities using melatonin and caffeine as model drugs, and alginate, chitosan and cellulose as composite materials. The melatonin, caffeine and intermediate hydroxypropylmethylcelluose-based dispersible modules were prepared through compaction. Caffeine piled module was capped at both ends with melatonin void modules via intermediate dispersible modules into Dome matrix. Dispersion of intermediate module detached melatonin module from Dome matrix and had it floated in stomach providing a more complete melatonin release due to favorable pH-pKa relationship of dissolution medium and drug. With reference to the caffeine module, the detachment of melatonin module facilitated its gastrointestinal transit as a reduced size matrix, with majority of caffeine delivered in colon. The dual site-targeted and -release Dome matrix is applicable as reference oral carrier for pharmaceutical, nutraceutical, functional food and veterinary medicine where a complex formulation and performancein vivoare required.
Collapse
Affiliation(s)
- Sharipah Razali
- Non-Destructive Biomedical and Pharmaceutical Research Centre, Smart Manufacturing Research Institute, Universiti Teknologi MARA Selangor, 42300, Puncak Alam, Selangor, Malaysia; Particle Design Research Group, Faculty of Pharmacy, Universiti Teknologi MARA Selangor, 42300, Puncak Alam, Selangor, Malaysia
| | - Anirbandeep Bose
- Taab Biostudy Services, Jadavpur University, Jadavpur, Kolkata 32, India
| | - Camillo Benetti
- Non-Destructive Biomedical and Pharmaceutical Research Centre, Smart Manufacturing Research Institute, Universiti Teknologi MARA Selangor, 42300, Puncak Alam, Selangor, Malaysia; Food and Drug Department, University of Parma, Parma, Italy
| | - Pee Win Chong
- InQpharm Group Sdn Bhd, Plaza Mont Kiara, 2, Jalan Kiara, 50480, Kuala Lumpur, Malaysia
| | - Matthias Miller
- InQPharm Consumer Health GmbH, Waldseeweg 6, 13467 Berlin, Germany
| | - Paolo Colombo
- Food and Drug Department, University of Parma, Parma, Italy; PlumeStars srl, Parma, Italy
| | - Gaia Colombo
- Department of Life Sciences and Biotechnology, University of Ferrara, Ferrara, Italy
| | - Tin Wui Wong
- Non-Destructive Biomedical and Pharmaceutical Research Centre, Smart Manufacturing Research Institute, Universiti Teknologi MARA Selangor, 42300, Puncak Alam, Selangor, Malaysia; Particle Design Research Group, Faculty of Pharmacy, Universiti Teknologi MARA Selangor, 42300, Puncak Alam, Selangor, Malaysia.
| |
Collapse
|
11
|
Remedio LN, Garcia VADS, Rochetti AL, Yoshida CMP, Fukumasu H, Vanin FM, Carvalho RAD. Hydroxypropyl methylcellulose orally disintegration films produced by tape casting with the incorporation of propolis ethanolic extract using the printing technique. Food Hydrocoll 2022. [DOI: 10.1016/j.foodhyd.2022.108176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/14/2022]
|
12
|
Stability, Permeability and Cytotoxicity of Buccal Films in Allergy Treatment. Pharmaceutics 2022; 14:pharmaceutics14081633. [PMID: 36015259 PMCID: PMC9415683 DOI: 10.3390/pharmaceutics14081633] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2022] [Revised: 07/21/2022] [Accepted: 08/03/2022] [Indexed: 01/11/2023] Open
Abstract
Oral mucoadhesive systems, such as polymer films, are among innovative pharmaceutical products. These systems can be applied in swallowing problems and can also be used in geriatrics and paediatrics. In our earlier work, we successfully formulated buccal mucoadhesive polymer films, which contained cetirizine-hydrochloride (CTZ) as the API. The present study focused on investigating the stability and permeability of the prepared films. The stability of the films was studied with an accelerated stability test. During the stability test, thickness, breaking hardness and in vitro mucoadhesivity were analysed. Furthermore, the interactions were studied with FT-IR spectroscopy, and the changes in the amount of the API were also monitored. Cytotoxicity and cell line permeability studies were carried out on TR 146 buccal cells. Compositions that can preserve more than 85% of the API after 6 months were found. Most of the compositions had a high cell viability of more than 50%. Citric acid (CA) decreased the stability and reduced every physical parameter of the films. However, cell line studies showed that the permeability of the films was enhanced. In our work, we successfully formulated CTZ-containing buccal films with adequate stability, high cell viability and appropriate absorption properties.
Collapse
|
13
|
Development and evaluation of bioadhesive buccal films based on sodium alginate for allergy therapy. Heliyon 2022; 8:e10364. [PMID: 36090229 PMCID: PMC9449571 DOI: 10.1016/j.heliyon.2022.e10364] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Revised: 07/16/2022] [Accepted: 08/15/2022] [Indexed: 11/29/2022] Open
Abstract
Buccal drug administration is a less explored area, therefore researchers and companies focus on its research because of its innovative potential and opportunities. Buccal polymer films (patches) are considered to be an innovative form and have a great number of advantageous properties. Firstly, patients who suffer from swallowing problems and children can also apply them. The active pharmaceutical ingredient enters the systemic circulation directly without degradation and transformation. The aim of this study was to formulate buccal films with sodium alginate (SA) because it is a rarely used, innovative polymer for the formulation of buccal films. The mechanical, chemical properties and dosage forms of the prepared films were investigated with different methods. To formulate the films, cetirizine dihydrochloride (CTZ) was used as model drug, and glycerol (GLY) was added to make the films more elastic. The samples were prepared and stored at room temperature. As a result, it can be seen that the mechanical properties of all film compositions show good results, especially breaking hardness. The films with high SA concentration containing CTZ had appropriate mucoadhesion forces, so these samples are suitable for application on the buccal mucosa. The results of dissolution confirmed this finding. Finally, it can be said we formulated fast dissolving films and it can be concluded that the films prepared with 3% SA concentration containing 1% and 3% GLY can be recommended for buccal application.
Collapse
|
14
|
Zhang Y, Jiang R, Lei L, Yang Y, Hu T. Drug delivery systems for oral disease applications. J Appl Oral Sci 2022; 30:e20210349. [PMID: 35262595 PMCID: PMC8908861 DOI: 10.1590/1678-7757-2021-0349] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2021] [Accepted: 12/14/2021] [Indexed: 02/08/2023] Open
Abstract
There are many restrictions on topical medications for the oral cavity. Various factors affect the topical application of drugs in the oral cavity, an open and complex environment. The complex physical and chemical environment of the oral cavity, such as saliva and food, will influence the effect of free drugs. Therefore, drug delivery systems have served as supporting structures or as carriers loading active ingredients, such as antimicrobial agents and growth factors (GFs), to promote antibacterial properties, tissue regeneration, and engineering for drug diffusion. These drug delivery systems are considered in the prevention and treatment of dental caries, periodontal disease, periapical disease, the delivery of anesthetic drugs, etc. These carrier materials are designed in different ways for clinical application, including nanoparticles, hydrogels, nanofibers, films, and scaffolds. This review aimed to summarize the advantages and disadvantages of different carrier materials. We discuss synthesis methods and their application scope to provide new perspectives for the development and preparation of more favorable and effective local oral drug delivery systems.
Collapse
Affiliation(s)
- Yue Zhang
- Sichuan University, West China Hospital of Stomatology, Department of Preventive Dentistry, State Key Laboratory of Oral Diseases, Chengdu, China
| | - Ruining Jiang
- Sichuan University, West China Hospital of Stomatology, Department of Preventive Dentistry, State Key Laboratory of Oral Diseases, Chengdu, China
| | - Lei Lei
- Sichuan University, West China Hospital of Stomatology, Department of Preventive Dentistry, State Key Laboratory of Oral Diseases, Chengdu, China
| | - Yingming Yang
- Sichuan University, West China Hospital of Stomatology, Department of Preventive Dentistry, State Key Laboratory of Oral Diseases, Chengdu, China
| | - Tao Hu
- Sichuan University, West China Hospital of Stomatology, Department of Preventive Dentistry, State Key Laboratory of Oral Diseases, Chengdu, China
| |
Collapse
|
15
|
Rodolfo C, Eusébio D, Ventura C, Nunes R, Florindo HF, Costa D, Sousa Â. Design of Experiments to Achieve an Efficient Chitosan-Based DNA Vaccine Delivery System. Pharmaceutics 2021; 13:pharmaceutics13091369. [PMID: 34575445 PMCID: PMC8471690 DOI: 10.3390/pharmaceutics13091369] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/23/2021] [Revised: 08/18/2021] [Accepted: 08/28/2021] [Indexed: 11/23/2022] Open
Abstract
In current times, DNA vaccines are seen as a promising approach to treat and prevent diseases, such as virus infections and cancer. Aiming at the production of a functional and effective plasmid DNA (pDNA) delivery system, four chitosan polymers, differing in the molecular weight, were studied using the design of experiments (DoE) tool. These gene delivery systems were formulated by ionotropic gelation and exploring the chitosan and TPP concentrations as DoE inputs to maximize the nanoparticle positive charge and minimize their size and polydispersity index (PDI) as DoE outputs. The obtained linear and quadratic models were statistically significant (p-value < 0.05) and non-significant lack of fit, with suitable coefficient of determination and the respective optimal points successfully validated. Furthermore, morphology, stability and cytotoxicity assays were performed to evaluate the endurance of these systems over time and their further potential for future in vitro studies. The subsequent optimization process was successful achieved for the delivery systems based on the four chitosan polymers, in which the smallest particle size was obtained for the carrier containing the 5 kDa chitosan (~82 nm), while the nanosystem prepared with the high molecular weight (HMW) chitosan displayed the highest zeta potential (~+26.8 mV). Delivery systems were stable in the formulation buffer after a month and did not exhibit toxicity for the cells. In this sense, DoE revealed to be a powerful tool to explore and tailor the characteristics of chitosan/pDNA nanosystems significantly contributing to unraveling an optimum carrier for advancing the DNA vaccines delivery field.
Collapse
Affiliation(s)
- Carlos Rodolfo
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
| | - Dalinda Eusébio
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
| | - Cathy Ventura
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
| | - Renato Nunes
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
| | - Helena F. Florindo
- Research Institute for Medicines (iMed.ULisboa), Faculty of Pharmacy, Universidade de Lisboa, 1649-003 Lisbon, Portugal;
| | - Diana Costa
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
| | - Ângela Sousa
- CICS-UBI—Health Science Research Centre, University of Beira Interior, Av. Infante D. Henrique, 6200-506 Covilhã, Portugal; (C.R.); (D.E.); (C.V.); (R.N.); (D.C.)
- Correspondence: ; Tel.: +351-275-329
| |
Collapse
|
16
|
Ulu A, Ateş B. Tailor-made shape memory stents for therapeutic enzymes: A novel approach to enhance enzyme performance. Int J Biol Macromol 2021; 185:966-982. [PMID: 34237367 DOI: 10.1016/j.ijbiomac.2021.07.003] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2021] [Revised: 06/30/2021] [Accepted: 07/01/2021] [Indexed: 12/15/2022]
Abstract
Herein, our suggestion is to immobilize enzymes in-situ on absorbable shape-memory stents instead of injecting therapeutic enzymes into the blood. Chitosan (CHI)-based stents were tailored as novel support and the enzyme-immobilizing ability was elucidated using L-asparaginase (L-ASNase). For developing shape-memory stents, CHI-glycerol (GLY) solution was prepared and further blended with different ratios of polyethylene glycol (PEG), and polyvinyl alcohol (PVA). Afterward, the blends were modified by ionic crosslinking with sodium tripolyphosphate to obtain a shape-memory character. L-ASNase was included in the blends by using in-situ method before ionic crosslinking. The prepared stents, with or without L-ASNase, were comprehensively characterized by using several techniques. Collectively, immobilized L-ASNase exhibited much better performance in immobilization parameters than free one, thanks to its improved stability and reusability. For instance, CHI/GLY/PEG-3@L-ASNase retained about 70% of the initial activity after storage at 30 °C for 2 weeks, whereas the free form lost half of its initial activity. Besides, it retained 73.4% residual activity after 15 consecutive cycles. Most importantly, stent formulations exhibited ~60% activity in the bioreactor system after 4 weeks of incubation. Given the above results, shape-memory stents can be a promising candidate as a new platform for immobilization, especially in the blood circulation system.
Collapse
Affiliation(s)
- Ahmet Ulu
- Biochemistry and Biomaterials Research Laboratory, Department of Chemistry, Faculty of Arts and Science, İnönü University, 44280 Malatya, Turkey
| | - Burhan Ateş
- Biochemistry and Biomaterials Research Laboratory, Department of Chemistry, Faculty of Arts and Science, İnönü University, 44280 Malatya, Turkey.
| |
Collapse
|
17
|
He M, Zhu L, Yang N, Li H, Yang Q. Recent advances of oral film as platform for drug delivery. Int J Pharm 2021; 604:120759. [PMID: 34098053 DOI: 10.1016/j.ijpharm.2021.120759] [Citation(s) in RCA: 34] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2021] [Revised: 05/17/2021] [Accepted: 05/26/2021] [Indexed: 12/17/2022]
Abstract
Orally drug delivery film has received extensive interest duo to a distinct set of its advantageous properties compared to the traditional orally administered dosages, including faster rate of drug absorption, higher bioavailability and better patient compliance for children and elders with swallowing deficiencies. In particular, its potential capacity of delivering proteins and peptides has further attracted great attention. Lately, tremendous advances have been made in designing and developing both novel mucoadhesive films and orodispersible films to fulfill specific accomplishments of drug delivery. This review aims to summarize those newly developed oral films, discussing their formulation strategies, manufacturing methods as well as advantages and limitations thereof. Conclusions and future perspectives are also provided in brief.
Collapse
Affiliation(s)
- Mengning He
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China
| | - Lingmeng Zhu
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China
| | - Ni Yang
- School of Mathematics, University of Bristol, Bristol BS8 1QU, UK
| | - Huijie Li
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China
| | - Qingliang Yang
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China; Ningbo Wesdon Powder Pharma Coatings Co. Ltd., Ningbo 315042, China.
| |
Collapse
|
18
|
Verma S, Goand UK, Husain A, Katekar RA, Garg R, Gayen JR. Challenges of peptide and protein drug delivery by oral route: Current strategies to improve the bioavailability. Drug Dev Res 2021; 82:927-944. [PMID: 33988872 DOI: 10.1002/ddr.21832] [Citation(s) in RCA: 34] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2021] [Revised: 04/01/2021] [Accepted: 04/26/2021] [Indexed: 12/17/2022]
Abstract
Advancement in biotechnology provided a notable expansion of peptide and protein therapeutics, used as antigens, vaccines, hormones. It has a prodigious potential to treat a broad spectrum of diseases such as cancer, metabolic disorders, bone disorders, and so forth. Protein and peptide therapeutics are administered parenterally due to their poor bioavailability and stability, restricting their use. Hence, research focuses on the oral delivery of peptides and proteins for the ease of self-administration. In the present review, we first address the main obstacles in the oral delivery system in addition to approaches used to enhance the stability and bioavailability of peptide/protein. We describe the physiochemical parameters of the peptides and proteins influencing bioavailability in the systemic circulation. It encounters, many barriers affecting its stability, such as poor cellular membrane permeability at the GIT site, enzymatic degradation (various proteases), and first-pass hepatic metabolism. Then describe the current approaches to overcome the challenges mentioned above by the use of absorption enhancers or carriers, structural modification, formulation and advance technology.
Collapse
Affiliation(s)
- Saurabh Verma
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India
| | - Umesh K Goand
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India
| | - Athar Husain
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India
| | - Roshan A Katekar
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India
| | - Richa Garg
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India
| | - Jiaur R Gayen
- Pharmaceutics and Pharmacokinetics Division, CSIR-Central Drug Research Institute, Lucknow, India.,Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India.,Pharmacology Division, CSIR-Central Drug Research Institute, Lucknow, India
| |
Collapse
|
19
|
Development and Evaluation of Fluoxetine Fast Dissolving Films: An Alternative for Noncompliance in Pediatric Patients. Processes (Basel) 2021. [DOI: 10.3390/pr9050778] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The most used pharmaceutical formulations for children are syrups, suppositories, soft chewable capsules, and mini-tablets. Administrating them might create an administration discomfort. This study aimed to develop and evaluate orodispersible films (ODFs) for pediatric patients in which the fluoxetine (FX) is formulated in the polymeric matrix. Six FX fast dissolving films (10 mg FX/ODF), FX1, FX2, FX3, FX4, FX5, and FX6, were prepared by solvent casting technique. In the composition of the ODFs, the concentration of the hydroxypropyl methylcellulose and the concentration of the propylene glycol were varied. Each formulation of fluoxetine ODF was evaluated by determining the tensile strength, folding endurance, disintegration, behavior in the controlled humidity and temperature conditions, and adhesiveness. All the obtained results were compared with the results obtained for six ODFs prepared without FX. The disintegration time of the FX ODFs was of maximum 88 s for FX2. Via the in vitro releasing study of the FX from the ODFs it was noticed that FX1 and FX2 allow a better release of the drug 99.98 ± 3.81% and 97.67 ± 3.85% being released within 15 min. From the obtained results it was also confirmed that FX ODFs were found to follow first-order release kinetic.
Collapse
|
20
|
Pamlényi K, Kristó K, Jójárt-Laczkovich O, Regdon G. Formulation and Optimization of Sodium Alginate Polymer Film as a Buccal Mucoadhesive Drug Delivery System Containing Cetirizine Dihydrochloride. Pharmaceutics 2021; 13:pharmaceutics13050619. [PMID: 33925927 PMCID: PMC8146756 DOI: 10.3390/pharmaceutics13050619] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2021] [Revised: 04/19/2021] [Accepted: 04/23/2021] [Indexed: 12/16/2022] Open
Abstract
Currently, pharmaceutical companies are working on innovative methods, processes and products. Oral mucoadhesive systems, such as tablets, gels, and polymer films, are among these possible products. Oral mucoadhesive systems possess many advantages, including the possibility to be applied in swallowing problems. The present study focused on formulating buccal mucoadhesive polymer films and investigating the physical and physical–chemical properties of films. Sodium alginate (SA) and hydroxypropyl methylcellulose (HPMC) were used as film-forming agents, glycerol (GLY) was added as a plasticizer, and cetirizine dihydrochloride (CTZ) was used as an active pharmaceutical ingredient (API). The polymer films were prepared at room temperature with the solvent casting method by mixed two-level and three-level factorial designs. The thickness, tensile strength (hardness), mucoadhesivity, surface free energy (SFE), FTIR, and Raman spectra, as well as the dissolution of the prepared films, were investigated. The investigations showed that GLY can reduce the mucoadhesivity of films, and CTZ can increase the tensile strength of films. The distribution of CTZ proved to be homogeneous in the films. The API could dissolve completely from all the films. We can conclude that polymer films with 1% and 3% GLY concentrations are appropriate to be formulated for application on the buccal mucosa as a drug delivery system.
Collapse
Affiliation(s)
| | | | | | - Géza Regdon
- Correspondence: or ; Tel.: +36-62-545574; Fax: +36-62-545571
| |
Collapse
|
21
|
Kelemen A, Katona B, Módra S, Aigner Z, Sebe I, Pintye-Hódi K, Zelkó R, Regdon G, Kristó K. Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films. Molecules 2020; 25:molecules25225248. [PMID: 33187115 PMCID: PMC7697652 DOI: 10.3390/molecules25225248] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2020] [Revised: 11/05/2020] [Accepted: 11/09/2020] [Indexed: 01/28/2023] Open
Abstract
In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains. The mechanical, structural, and in vitro mucoadhesive properties of films containing SP were investigated. Tensile strength and mucoadhesive force were measured with a device and software developed in our Institute. Positron annihilation lifetime spectroscopy (PALS) and X-ray powder diffractometry (XRPD) were applied for the structure analysis of the films. Mucoadhesive work was calculated in two ways: from the measured contact angle and compared with direct mucoadhesive work, which measured mucoadhesive force, which is direct mucoadhesion work. These results correlate linearly with a correlation coefficient of 0.98. It is also novel because it is a new method for the determination of mucoadhesive work.
Collapse
Affiliation(s)
- András Kelemen
- Department of Applied Informatics, University of Szeged, Boldogasszony sgt. 6., H-6725 Szeged, Hungary;
| | - Bálint Katona
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
| | - Szilvia Módra
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
| | - Zoltán Aigner
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
| | - István Sebe
- University Pharmacy Department of Pharmacy Administration, Semmelweis University, Hőgyes E. u. 7-9., H-1092 Budapest, Hungary; (I.S.); (R.Z.)
| | - Klára Pintye-Hódi
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
| | - Romána Zelkó
- University Pharmacy Department of Pharmacy Administration, Semmelweis University, Hőgyes E. u. 7-9., H-1092 Budapest, Hungary; (I.S.); (R.Z.)
| | - Géza Regdon
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
- Correspondence: ; Tel.: +36-62-545574; Fax: +36-62-545571
| | - Katalin Kristó
- Institute of Pharmaceutical Technology and Regulatory Affairs, University of Szeged, Eötvös u. 6., H-6720 Szeged, Hungary; (B.K.); (S.M.); (Z.A.); (K.P.-H.); (K.K.)
| |
Collapse
|