Development of extra-fine particles containing nanosized meloxicam for deep pulmonary delivery: in vitro aerodynamic and cell line measurements

A Novel Combined Dry Powder Inhaler Comprising Nanosized Ketoprofen-Embedded Mannitol-Coated Microparticles for Pulmonary Inflammations: Development, In Vitro-In Silico Characterization, and Cell Line Evaluation

Pulmonary inflammations such as chronic obstructive pulmonary disease and cystic fibrosis are widespread and can be fatal, especially when they are characterized by abnormal mucus accumulation. Inhaled corticosteroids are commonly used for lung inflammations despite their considerable side effects. By utilizing particle engineering techniques, a combined dry powder inhaler (DPI) comprising nanosized ketoprofen-embedded mannitol-coated microparticles was developed. A nanoembedded microparticle system means a novel advance in pulmonary delivery by enhancing local pulmonary deposition while avoiding clearance mechanisms. Ketoprofen, a poorly water-soluble anti-inflammatory drug, was dispersed in the stabilizer solution and then homogenized by ultraturrax. Following this, a ketoprofen-containing nanosuspension was produced by wet-media milling. Furthermore, co-spray drying was conducted with L-leucine (dispersity enhancer) and mannitol (coating and mucuactive agent). Particle size, morphology, dissolution, permeation, viscosity, in vitro and in silico deposition, cytotoxicity, and anti-inflammatory effect were investigated. The particle size of the ketoprofen-containing nanosuspension was ~230 nm. SEM images of the spray-dried powder displayed wrinkled, coated, and nearly spherical particles with a final size of ~2 µm (nano-in-micro), which is optimal for pulmonary delivery. The mannitol-containing samples decreased the viscosity of 10% mucin solution. The results of the mass median aerodynamic diameter (2.4-4.5 µm), fine particle fraction (56-71%), permeation (five-fold enhancement), and dissolution (80% release in 5 min) confirmed that the system is ideal for local inhalation. All samples showed a significant anti-inflammatory effect and decreased IL-6 on the LPS-treated U937 cell line with low cytotoxicity. Hence, developing an innovative combined DPI comprising ketoprofen and mannitol by employing a nano-in-micro approach is a potential treatment for lung inflammations.

Inhalable spray-dried polycaprolactone-based microparticles of Sorafenib Tosylate with promising efficacy on A549 cells

The study developed and evaluated Sorafenib Tosylate (SRT)-loaded polymeric microparticles (MPs) using biodegradable polymer polycaprolactone (PCL) as a potential inhalable carrier for NSCLC. MPs were prepared by spray-drying an oil-in-water (o/w) emulsion. The optimized MPs demonstrated excellent flowability, particle size of 2.84 ± 0.5 μm, zeta potential of -14.0 ± 1.5 mV, and 85.08 ± 5.43% entrapment efficiency. ATR-FTIR/DSC studies revealed a lack of characteristic peaks of the crystalline drug signifying good entrapment of the drug. MPs were spherical and uniform in SEM pictures. The MPs showed a biphasic release pattern up to 72h. The Anderson cascade impactor (ACI) investigation demonstrated the highest drug deposition at stage 4, which revealed that the MPs can reach the lungs' secondary and terminal bronchi. Inhalable MPs had an efficient aerodynamic property with a mass median aerodynamic diameter (MMAD) of 2.63 ± 1.3 μm, a geometric standard deviation (GSD) of 1.93 ± 0.2 μm, and a fine particle fraction (FPF) of 87 ± 2.5%. Finally, in cytotoxicity studies on A549 cancer cells, MPs had an IC50 value of 0.6011 ± 0.8 μM, which was 85.68% lower than free drug. These findings suggest SRT-loaded inhalable PCL-based MPs as a novel NSCLC treatment.

Cyclosporine A-loaded chitosan extra-fine particles for deep pulmonary drug delivery: In vitro and in vivo evaluation

In this study, the extra-fine dry powder inhalers (DPIs) with chitosan (CS) as carrier were successfully prepared by ionic gel method combined with spray drying technique for deep pulmonary drug delivery of Cyclosporine A (CsA), using sodium hyaluronate (SHA) and sodium polyglutamate (SPGA) as polyanions. The CsA-loaded DPIs of CS-SHA-CsA and CS-SPGA-CsA were spherical particles with wrinkles on the surface, which were more conducive to improving the aerosol properties. The aerodynamic evaluation of CS-SHA-CsA and CS-SPGA-CsA showed that the fine particle fraction (FPF) reached up to 79.22 ± 2.12% and 81.55 ± 0.43%, while the emitted fraction (EF) reached 77.15 ± 1.46% and 78.29 ± 2.10%. In addition, the mass median aerodynamic diameter (MMAD) was calculated as 1.58 ± 0.04 μm and 1.94 ± 0.02 μm for CS-SHA-CsA and CS-SPGA-CsA, indicating that they were all extra-fine particles (d < 2 μm). These in vitro aerodynamic results showed that CS-SHA-CsA and CS-SPGA-CsA could reach the smaller airways, further improving therapeutic efficiency. The cell viability on A549 cell line results showed that CS-SHA-CsA and CS-SPGA-CsA were safe to deliver CsA to lungs. The in vivo pharmacokinetics consequence proved that inhalation administration of CS-SHA-CsA and CS-SPGA-CsA could significantly improve the bioavailability of CsA in vivo compared with oral administration of Neoral®, effectively reducing the risk of a series of adverse effects caused by systemic overexposure. In addition, the safety and compatibility of DPIs using SHA, SPGA, and CS as carriers for pulmonary drug delivery was verified by in vivo repeated dose inhalation toxicity. From these findings, the extra-fine DPIs with CS as carrier could be a viable delivery option for the deep pulmonary drug delivery of CsA relative to orally administered drug.

Development of Large Hollow Particles for Pulmonary Delivery of Cyclosporine A

The purpose of this study was to prepare large hollow particles (LHPs) by spray drying for pulmonary delivery of cyclosporine A (CsA), using L-Leucine (LEU) and hydroxypropyl methylcellulose (HPMC) as excipients and ammonium bicarbonate (AB) as a porogen. The prepared LHPs were spherical particles composed of both CsA and LEU on the surface and HPMC on the inner layer. The formulation of CsA-LEU-0.8HPMC-AB as typical LHPs showed excellent in vitro aerodynamic performance with a minimum mass median aerodynamic diameter (MMAD) of 1.15 μm. The solubility of CsA-LEU-0.8HPMC-AB was about 5.5-fold higher than that of raw CsA, and the dissolution of CsA-LEU-0.8HPMC-AB suggested that the drug was released within 1 h. The cell viability of the A549 cell line showed that CsA-LEU-0.8HPMC-AB was safe for delivering CsA to the lungs. In addition, inhalation administration of CsA-LEU-0.8HPMC-AB with the Cmax and AUC0-∞ increasing by about 2-fold and 2.8-fold compared with the oral administration of Neoral® could achieve therapeutic drug concentrations with lower systemic exposure and significantly improve the in vivo bioavailability of CsA. From these findings, the LHPs, with the advantage of avoiding alveolar macrophage clearance, could be a viable choice for delivering CsA by inhalation administration relative to oral administration.

Investigation of Physico-Chemical Stability and Aerodynamic Properties of Novel "Nano-in-Micro" Structured Dry Powder Inhaler System

Pulmonary drug transport has numerous benefits. Large surface areas for absorption and limited drug degradation of the gastrointestinal system are provided through the respiratory tract. The administration is painless and easy for the patient. Due to their better stability when compared to liquid formulations, powders have gained popularity among pulmonary formulations. In the pharmaceutical sector, quality assurance and product stability have drawn a lot of attention. Due to this, it was decided to perform a long-term stability study on a previously developed, nanosized dry powder inhaler (DPI) formulation that contained meloxicam. Wet milling was implemented to reduce the particle size, and nano spray-drying was used to produce the extra-fine inhalable particles. The particle diameter was determined using dynamic light scattering and laser diffraction. Scanning electron microscopy was utilized to describe the morphology. X-ray powder diffraction and differential scanning calorimetry were applied to determine the crystallinity. In an artificial lung medium, the in vitro dissolution was studied. The Andersen Cascade Impactor was used to investigate the in vitro aerodynamic characteristics. The stability test results demonstrated that the DPI formulation maintained its essential qualities after 6 and 12 months of storage. Consequently, the product might be promising for further studies and development.

Preparation and Characterization of Ibuprofen Containing Nano-Embedded-Microparticles for Pulmonary Delivery

A fatal hereditary condition, cystic fibrosis (CF) causes severe lung problems. Ibuprofen (IBU), a non-steroidal anti-inflammatory drug, slows the progression of disease without causing significant side effects. Considering the poor water-solubility of the drug, IBU nanoparticles are beneficial for local pulmonary administration. We aimed to formulate a carrier-free dry powder inhaler containing nanosized IBU. We combined high-performance ultra-sonication and nano spray-drying. IBU was dissolved in ethyl acetate; after that, it was sonicated into a polyvinyl alcohol solution, where it precipitated as nanoparticles. Mannitol and leucine were added when producing dry particles using nano-spray drying. The following investigations were implemented: dynamic light scattering, laser diffraction, surface tension measurement, scanning electron microscopy, X-ray powder diffraction, differential scanning calorimetry, Fourier-transform infrared spectroscopy, in vitro dissolution test, and in vitro aerodynamic assessment (Andersen Cascade Impactor). The particle diameter of the IBU was in the nano range. The spray-dried particles showed a spherical morphology. The drug release was rapid in artificial lung media. The products represented large fine particle fractions and proper aerodynamic diameters. We successfully created an inhalable powder, containing nano-sized IBU. Along with the exceptional aerodynamic performance, the ideal particle size, shape, and drug-release profile might offer a ground-breaking local therapy for CF.