Preparation and Investigation of a Nanosized Piroxicam Containing Orodispersible Lyophilizate

Non-steroidal anti-inflammatory piroxicam (PRX) is a poorly water-soluble drug that provides relief in different arthritides. Reducing the particle size of PRX increases its bioavailability. For pediatric, geriatric, and dysphagic patients, oral dispersible systems ease administration. Moreover, fast disintegration followed by drug release and absorption through the oral mucosa can induce rapid systemic effects. We aimed to produce an orodispersible lyophilizate (OL) consisting of nanosized PRX. PRX was solved in ethyl acetate and then sonicated into a poloxamer-188 solution to perform spray-ultrasound-assisted solvent diffusion-based nanoprecipitation. The solid form was formulated via freeze drying in blister sockets. Mannitol and sodium alginate were applied as excipients. Dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) were used to determine the particle size. The morphology was characterized by scanning electron microscopy (SEM). To establish the crystallinity, X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) were used. A disintegration and in vitro dissolution test were performed. DLS and NTA presented a nanosized PRX diameter. The SEM pictures showed a porous structure. PRX became amorphous according to the XRPD and DSC curves. The disintegration time was less than 1 min and the dissolution profile improved. The final product was an innovative anti-inflammatory drug delivery system.

Tuning Local Order in Starch Nanoparticles Exploiting Nonsolvency with "Green" Solvents

Starch is a renewable biopolymer that can be sourced from agricultural waste and used to produce nanoparticles (SNPs). In particular, amorphous SNPs have potential application in numerous fields, including the consolidation of weakened paintings in the cultural heritage preservation. Starch dissolution followed by nanoprecipitation in nonsolvents is an advantageous synthetic route, but new methodologies are needed to feasibly control the physicochemical properties of the SNPs. Here, we explored nanoprecipitation by nonsolvency using a set of "green" solvents to obtain amorphous SNPs, rather than starch nanocrystals already reported in the literature. The effect of the nonsolvent on the ordering of polymer chains in the obtained SNPs was studied. The recovery of local order (e.g., isolated V-type helices) after dissolution was shown to depend on the type of solvents used in the dissolution and precipitation steps, while long-range order (extended arrays of helices) is lost. Aqueous dispersions of the SNPs provided effective consolidation of powdery painted layers, showing that the selection of particle synthetic routes can be dictated by sustainability and scalability criteria. These "green" formulations are candidates as new consolidants in art preservation, and the possibility of tuning local order in amorphous starch assemblies might also impact fields like food chemistry, pharmaceutics, and nanocomposites, where SNPs with tunable amorphousness are more advantageous than nanocrystals.

[Preparation of Nanoplastic Particles as Potential Standards for the Study of Nanoplastics]

Nanoplastics (NPs) are plastic fragments that are small enough to be absorbed by organisms through ingestion or inhalation. Recent studies indicate that nanoplastics can be ubiquitous in the environment, and there are growing concerns regarding the impacts of nanoplastics on the health of humans and other organisms. However, quantitative information on nanoplastics in the environment is still very limited, and most previous toxicity studies have used only polystyrene (PS) particles because of a lack of appropriate model particles of other plastics. We developed a nanoprecipitation-based method for the preparation of nanoplastic particles of five major polymers: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polyvinyl chloride (PVC), and polystyrene. A major advantage of our method is that the nanoplastic particles are prepared without using reagents that can remain in the particles as impurities. Analysis of the prepared particles' molecular weight (Mw) distributions, crystallinities, and thermal properties revealed that their compositions and constitutions were within the general ranges for commercial products. The mechanisms underlying the formation of low-density polyethylene particles via our method were investigated by means of a simple population balance model, and particle diameter was found to be linearly correlated with the suspension density of the nanoplastic dispersion up to 0.4 mg·mL-1. Future studies should focus on improving our method to allow for precise, scale-independent production of nanoplastic particles. Methods for the preparation of labeled particles are also needed so that such particles can be used in nanoplastic risk assessments.

Characterization of Nanoprecipitated PET Nanoplastics by 1H NMR and Impact of Residual Ionic Surfactant on Viability of Human Primary Mononuclear Cells and Hemolysis of Erythrocytes

Manufactured nanoplastic particles (NPs) are indispensable for in vitro and in vivo testing and a health risk assessment of this emerging environmental contaminant is needed. The high surface area and inherent hydrophobicity of plastic materials makes the production of NPs devoid of any contaminants very challenging. In this study, we produced nanoprecipitated polyethylene terephthalate (PET) NPs (300 nm hydrodynamic diameter) with an overall yield of 0.76%. The presence of the ionic surfactant sodium dodecyl sulfate (SDS) was characterized by 1H NMR, where the relative ratio of NP/surfactant was monitored on the basis of the chemical shifts characteristic of PET and SDS. For a wide range of surfactant/NP ratios (17:100 to 1.2:100), the measured zeta potential changed from -42.10 to -34.93 mV, but with an NP concentration up to 100 μg/mL, no clear differences were observed in the cellular assays performed in protein-rich media on primary human cells. The remaining impurities contributed to the outcome of the biological assays applied in protein-free buffers, such as human red blood cell hemolysis. The presence of SDS increased the NP-induced hemolysis by 1.5% in protein-rich buffer and by 7.5% in protein-free buffer. As the size, shape, zeta potential, and contaminants of NPs may all be relevant parameters for the biological effects of NPs, the relative quantification of impurities exemplified in our work by the application of 1H NMR for PET NPs and the ionic surfactant SDS could be a valuable auxiliary method in the quality control of manufactured NPs.

Preparation of protein-loaded nanoparticles based on poly(succinimide)-oleylamine for sustained protein release: a two-step nanoprecipitation method

Currently, the treatment for acute disease encompasses the use of various biological drugs (BDs). However, the utilisation of BDs is limited due to their rapid clearance and non-specific accumulation in unwanted sites, resulting in a lack of therapeutic efficacy together with adverse effects. While nanoparticles are considered good candidates to resolve this problem, some available polymeric carriers for BDs were mainly designed for long-term sustained release. Thus, there is a need to explore new polymeric carriers for the acute disease phase that requires sustained release of BDs over a short period, for example for thrombolysis and infection. Poly(succinimide)-oleylamine (PSI-OA), a biocompatible polymer with a tuneable dissolution profile, represents a promising strategy for loading BDs for sustained release within a 48-h period. In this work, we developed a two-step nanoprecipitation method to load the model protein (e.g. bovine serum albumin and lipase) on PSI-OA. The characteristics of the nanoparticles were assessed based on various loading parameters, such as concentration, stirring rate, flow rate, volume ratio, dissolution and release of the protein. The optimised NPs displayed a size within 200 nm that is suitable for vasculature delivery to the target sites. These findings suggest that PSI-OA can be employed as a carrier for BDs for applications that require sustained release over a short period.

Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake

The nanoprecipitation method was used to formulate ε-polycaprolactone (PCL) into fluorescent nanoparticles. Two methods of mixing the phases were evaluated: introducing the organic phase into the aqueous phase dropwise and via a specially designed microfluidic device. As a result of the nanoprecipitation process, fluorescein-loaded nanoparticles (NPs) with a mean diameter of 127 ± 3 nm and polydispersity index (PDI) of 0.180 ± 0.009 were obtained. The profiles of dye release were determined in vitro using dialysis membrane tubing, and the results showed a controlled release of the dye from NPs. In addition, the cytotoxicity of the NPs was assessed using an MTT assay. The PCL NPs were shown to be safe and non-toxic to L929 and MG63 cells. The results of the present study have revealed that PCL NPs represent a promising system for developing new drug delivery systems.

Sorafenib tosylate-loaded nanosuspension: preparation, optimization, and in vitro cytotoxicity study against human HepG2 carcinoma cells

This study aimed to optimize nanosuspension of sorafenib tosylate (an anticancer hydrophobic drug molecule) using a central composite design. Nanosuspension was prepared using a nanoprecipitation-ultrasonication approach. FTIR and DSC analyses demonstrated that the drug and excipients were physicochemically compatible. X-ray powder diffraction analysis confirmed amorphous form of the payload in the formulation. The optimized formulation (batch NSS6) had a zeta potential of -18.1 mV, a polydispersity of 0.302, and a particle size of 97.11 nm. SEM analysis confirmed formation of rod-shaped particles. After 24 h, about 64.45% and 86.37% of the sorafenib tosylate was released in pH 6.8 and pH 1.2, respectively. The MTT assay was performed on HepG2 cell lines. IC50 value of the optimized batch was 39.4 µg/mL. The study concluded that sorafenib tosylate nanosuspension could be a promising approach in the treatment of hepatocellular cancer.

Biodistribution of Fluorescent Albumin Nanoparticles among Organs of Laboratory Animals after Intranasal and Peroral Administration

Natural, environmental and engineered nanoparticles (NP) penetrate into cells by endocytosis and induce innate immunity. The behaviour of the nanomaterials both in vitro and in vivo should be assessed. Our goal was to study protein NP stability in biological fluids and distribution in organs of animals after intranasal and oral administration. Bovine serum albumin (BSA) was labelled with the fluorescent dye RhoB and NP were fabricated by nanoprecipitation. The fluorescent protein NPwere administered intranasally and orally in laboratory-outbred mice ICR and rabbits. RhoB-BSA NP distribution in organs was detected using spectrofluorometry and fluorescent microscopy. Innate immunity was evaluated using reverse transcription with random hexanucleotide primer and subsequent real-time PCR with specific fluorescent hydrolysis probes. The labelled BSA NP were shown to remain stable in blood sera and nasopharyngeal swabs for 5 days at +37 °C. In vivo the maximal accumulation was found in the brain in 2 days posttreatment without prevalent accumulation in olfactory bulbs. For the intestine, heart and liver, the BSA NP accumulation was similar in 1 and 2 days, whereas for kidney samples even decreased after 1 day. Both intranasal and peroral administration of RhoB-BSA NP did not induce innate immunity. Thus, after intranasal or oral instillation RhoB-BSA NP were found mainly in the brain and intestine without interferon gene expression.

"Reaction"-Like Shaping of Self-Delivery Supramolecular Nanodrugs in the Nanoprecipitation Process

Nanoprecipitation, which is achieved through the diffusion and precipitation of drug molecules in blended solvent and antisolvent phases, is a classic route for constructing nanodrugs (NDs) and previously directed by diffusion-controlled theory. However, the diffusion-controlled mechanism is out of date in the recent preparation of self-delivery supramolecular NDs (SDSNDs), characterized by the construction of drug nanoparticles through supramolecular interactions in the absence of carriers and surfactants. Herein, a "reaction"-like complement, contributed from supramolecular interactions, is proposed for the preparation of naphthoquinone SDSNDs. Different from the diffusion-controlled process, the formation rate of SDSNDs via the "reaction"-like process is almost constant and highly dependent on the supramolecular interaction-determined Gibbs free energy of molecular binding. Thus, the formation rate and drug availability of SDSNDs are greatly improved by engineering the supramolecular interactions, which facilitates the preparation of SDSNDs with expected sizes, components, and therapeutic functions. As a deep understanding of supramolecular-interaction-involved nanoprecipitation, the current "reaction"-like protocol not only provides a theoretical supplement for classic nanoprecipitation but also highlights the potential of nanoprecipitation in shaping self-assembled, coassembled, and metal-ion-associated SDSNDs.

Highly Water-Dispersed and Stable Deinoxanthin Nanocapsule for Effective Antioxidant and Anti-Inflammatory Activity

Introduction

Deinoxanthin (DX), a carotenoid, has excellent antioxidant and anti-inflammatory properties. However, owing to its lipophilicity, it is unfavorably dispersed in water and has low stability, limiting its application in cosmetics, food, and pharmaceuticals. Therefore, it is necessary to study nanoparticles to increase the loading capacity and stability of DX.

Methods

In this study, DX-loaded nanocapsules (DX@NCs) were prepared by nanoprecipitation by loading DX into nanocapsules. The size, polydispersity index, surface charge, and morphology of DX@NCs were confirmed through dynamic light scattering and transmission electron microscopy. The loading content and loading efficiency of DX in DX@NCs were analyzed using high-performance liquid chromatography. The antioxidant activity of DX@NCs was evaluated by DPPH assay and in vitro ROS. The biocompatibility of DX@NCs was evaluated using an in vitro MTT assay. In vitro NO analysis was performed to determine the effective anti-inflammatory efficacy of DX@NCs.

Results

DX@NCs exhibited increased stability and antioxidant efficacy owing to the improved water solubility of DX. The in situ and in vitro antioxidant activity of DX@NCs was higher than that of unloaded DX. In addition, it showed a strong anti-inflammatory effect by regulating the NO level in an in vitro cell model.

Conclusion

This study presents a nanocarrier to improve the water-soluble dispersion and stability of DX. These results demonstrate that DX@NC is a carrier with excellent stability and has a high potential for use in cosmetic and pharmaceutical applications owing to its antioxidant and anti-inflammatory effects.

PEG 400:Trehalose Coating Enhances Curcumin-Loaded PLGA Nanoparticle Internalization in Neuronal Cells

This work proposes a combination of polyethylene glycol 400 (PEG) and trehalose as a surface modification approach to enhance PLGA-based nanoparticles as a drug carrier for neurons. PEG improves nanoparticles' hydrophilicity, and trehalose enhances the nanoparticle's cellular internalization by inducing a more auspicious microenvironment based on inhibiting cell surface receptor denaturation. To optimize the nanoprecipitation process, a central composite design was performed; nanoparticles were adsorbed with PEG and trehalose. PLGA nanoparticles with diameters smaller than 200 nm were produced, and the coating process did not considerably increase their size. Nanoparticles entrapped curcumin, and their release profile was determined. The nanoparticles presented a curcumin entrapment efficiency of over 40%, and coated nanoparticles reached 60% of curcumin release in two weeks. MTT tests and curcumin fluorescence, with confocal imaging, were used to assess nanoparticle cytotoxicity and cell internalization in SH-SY5Y cells. Free curcumin 80 µM depleted the cell survival to 13% at 72 h. Contrariwise, PEG:Trehalose-coated curcumin-loaded and non-loaded nanoparticles preserved cell survival at 76% and 79% under the same conditions, respectively. Cells incubated with 100 µM curcumin or curcumin nanoparticles for 1 h exhibited 13.4% and 14.84% of curcumin's fluorescence, respectively. Moreover, cells exposed to 100 µM curcumin in PEG:Trehalose-coated nanoparticles for 1 h presented 28% fluorescence. In conclusion, PEG:Trehalose-adsorbed nanoparticles smaller than 200 nm exhibited suitable neural cytotoxicity and increased cell internalization proficiency.

Tetrazole linkages as photoactivated fuels for light-regulated photothermal/photocatalytic propulsion of versatile polymer nanoplatforms

Colloidal motors with multimode propulsion have attracted considerable attention because of enhanced transportability. It is a great challenge to fabricate colloidal motors powered by a single engine for multimode synergistic propulsion. Herein, we report on Janus versatile polymer nanoplatforms integrating various functionalities via tetrazole linkages for light-regulated multimode synergistic propulsion in the liquid. The presence of tetrazole linkages in the polymers endows the nanoparticles with various photoresponsive capabilities. A sole energy source (ultraviolet or visible light) simultaneously activates photocatalytic N2 release and photothermal conversion within the tetrazole-containing polymer phase at one side of asymmetric nanoparticles for converting light energy into photothermal/photocatalytic propulsion independent of the surrounding chemical medium. The photoactivated locomotion using tetrazoles as light-triggered fuels highly corresponds to light wavelengths, light powers and tetrazole contents. The tetrazole linkages capable of incorporating various functionalities to the polymer nanoparticles allow on-demand customizing of the colloidal motors, showing great potential in bio-applications.

Engineered Organic Nanorockets with Light-Driven Ultrafast Transportability for Antitumor Therapy

Nanomedicines confront various complicated physiological barriers limiting the accumulation and deep penetration in the tumor microenvironment, which seriously restricts the efficacy of antitumor therapy. Self-propelled nanocarriers assembled with kinetic engines can translate external energy into orientated motion for tumor penetration. However, achieving a stable ultrafast permeability at the tumor site remains challenging. Here, sub-200 nm photoactivated completely organic nanorockets (NRs), with asymmetric geometry conveniently assembled from photothermal semiconducting polymer payload and thermo-driven macromolecular propulsion through a straightforward nanoprecipitation process, are presented. The artificial NRs can be remotely manipulated by 808 nm near-infrared light to trigger the photothermal conversion and Curtius rearrangement reaction within the particles for robustly pushing nitrogen out into the solution. Such a two-stage light-to-heat-to-chemical energy transition effectively powers the NRs for an ultrafast (≈300 µm s^-1 ) and chemical medium-independent self-propulsion in the liquid media. That endows the NRs with high permeability against physiological barriers in the tumor microenvironment to directionally deliver therapeutic agents to target lesions for elevating tumor accumulation, deep penetration, and cellular uptake, resulting in a significant enhancement of antitumor efficacy. This work will inspire the design of advanced kinetic systems for powering intelligent nanomachines in biomedical applications.

Preparation and Characterization of Ibuprofen Containing Nano-Embedded-Microparticles for Pulmonary Delivery

A fatal hereditary condition, cystic fibrosis (CF) causes severe lung problems. Ibuprofen (IBU), a non-steroidal anti-inflammatory drug, slows the progression of disease without causing significant side effects. Considering the poor water-solubility of the drug, IBU nanoparticles are beneficial for local pulmonary administration. We aimed to formulate a carrier-free dry powder inhaler containing nanosized IBU. We combined high-performance ultra-sonication and nano spray-drying. IBU was dissolved in ethyl acetate; after that, it was sonicated into a polyvinyl alcohol solution, where it precipitated as nanoparticles. Mannitol and leucine were added when producing dry particles using nano-spray drying. The following investigations were implemented: dynamic light scattering, laser diffraction, surface tension measurement, scanning electron microscopy, X-ray powder diffraction, differential scanning calorimetry, Fourier-transform infrared spectroscopy, in vitro dissolution test, and in vitro aerodynamic assessment (Andersen Cascade Impactor). The particle diameter of the IBU was in the nano range. The spray-dried particles showed a spherical morphology. The drug release was rapid in artificial lung media. The products represented large fine particle fractions and proper aerodynamic diameters. We successfully created an inhalable powder, containing nano-sized IBU. Along with the exceptional aerodynamic performance, the ideal particle size, shape, and drug-release profile might offer a ground-breaking local therapy for CF.

Synthesis and Application of Low Molecular Weight PEI-Based Copolymers for siRNA Delivery with Smart Polymer Blends

Polyethylenimine (PEI) is a commonly used cationic polymer for small-interfering RNA (siRNA) delivery due to its high transfection efficiency at low commercial cost. However, high molecular weight PEI is cytotoxic and thus, its practical application is limited. In this study, different formulations of low molecular weight PEI (LMW-PEI) based copolymers polyethylenimine-g-polycaprolactone (PEI-PCL) (800 Da-40 kDa) and PEI-PCL-PEI (5-5-5 kDa) blended with or without polyethylene glycol-b-polycaprolactone (PEG-PCL) (5 kDa-4 kDa) are investigated to prepare nanoparticles via nanoprecipitation using a solvent displacement method with sizes ≈100 nm. PEG-PCL can stabilize the nanoparticles, improve their biocompatibility, and extend their circulation time in vivo. The nanoparticles composed of PEI-PCL-PEI and PEG-PCL show higher siRNA encapsulation efficiency than PEI-PCL/PEG-PCL based nanoparticles at low N/P ratios, higher cellular uptake, and a gene silencing efficiency of ≈40% as a result of the higher molecular weight PEI blocks. These results suggest that the PEI-PCL-PEI/PEG-PCL nanoparticle system could be a promising vehicle for siRNA delivery at minimal synthetic effort.

Poly Lactic-Co-Glycolic Acid Nano-Carriers for Encapsulation and Controlled Release of Hydrophobic Drug to Enhance the Bioavailability and Antimicrobial Properties

This study focusses on the fabrication of nano-carriers for delivery of ciprofloxacin through the nanoprecipitation process. This was done to examine the release of drug at the pH of stomach to find out the antibacterial action of ciprofloxacin loaded nanoparticles (NPs). Prepared NPs were characterized by Fourier Transform Infra-Red (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), and particle size analyzer (PSA) techniques. Drug yield, loading, and sustained release was studied as function of time (up to 8 h). Antibacterial activity of ciprofloxacin loaded NPs were also determined against different gram-positive and gram-negative bacteria. Results revealed that nanoprecipitation is a suitable method for encapsulation of ciprofloxacin in poly(lactic-co-glycolic acid) PLGA NPs. The drug yield and drug loading were found to be 60%. The size range of NPs observed by PSA was in the range of 5.03-6.60 nm. It can be concluded that nanoformulation of ciprofloxacin loaded PLGA NPs can be used in stomach for longer period of time to enhance the bioavailability of the drug.

The Chemotherapeutic Efficacy of Hyaluronic Acid Coated Polymeric Nanoparticles against Breast Cancer Metastasis in Female NCr-Nu/Nu Nude Mice

Polyethylene glycol (PEG) coated Poly lactic-co-glycolic acid (PLGA) nanoparticles (NPs) for cancer treatment are biocompatible, nonimmunogenic and accumulate in tumour sites due to the enhanced permeability and retention (EPR). Doxorubicin (DOX) is a potent but cardiotoxic anticancer agent. Hyaluronic acid (HA) occurs naturally in the extra-cellar matrix and binds to CD44 receptors which are overexpressed in cancer metastasis, proven to be characteristic of cancer stem cells and responsible for multidrug resistance. In this study, an athymic mice model of breast cancer metastasis was developed using red fluorescent protein (RFP)-labelled triple negative cancer cells. The animals were divided into four treatment groups (Control, HA-PEG-PLGA nanoparticles, PEG-PLGA nanoparticles, and Free DOX). The tumour size growth was assessed until day 25 when animals were sacrificed. Mice treated with HA-PEG-PLGA NPs inhibited tumour growth. The tumour growth at day 25 (118% ± 13.0) was significantly (p < 0.05) less than PEG-PLGA NPs (376% ± 590 and control (826% ± 970). Fluorescent microscopy revealed that HA-PEG-PLGA NPs had significantly (p < 0.05) less metastasis in liver, spleen, colon, and lungs as compared to control and to Free DOX groups. The efficacy of HA-PEG-PLGA NPs was proven in vivo. Further pharmacokinetic and toxicity studies are required for this formulation to be ready for clinical research.

Evaluation of Pharmacokinetics, Biodistribution, and Antimalarial Efficacy of Artemether-Loaded Polymeric Nanorods

Artemether oily injection is recommended for the treatment of severe malaria by the intramuscular route. The major limitations of the artemisinin combination therapy are erratic absorption from the injection site and high dosing frequency due to a very short elimination half-life of the drug. Advanced drug delivery systems have shown significant improvement in the current malaria therapy; the desired drug concentration within infected erythrocytes is yet the major challenge. Recently, we have reported the fabrication of artemether-loaded polymeric nanorods for intravenous malaria therapy which was found to be biocompatible with THP-1 monocytes and rat erythrocytes. The objective of the present study was the evaluation of pharmacokinetics, biodistribution, and antimalarial efficacy of artemether-loaded polymeric nanorods. Scanning electron microscopy and confocal microscopy studies revealed that both nanospheres and nanorods were adsorbed onto the surface of rat erythrocytes after an incubation of 10 min. After intravenous administration to rats, artemether nanorods showed higher plasma concentration and lower elimination rate of artemether when compared with nanospheres. The biodistribution studies showed that, at 30 min, the liver concentration of DiR-loaded nanospheres was higher than that of DiR-loaded nanorods after intravenous administration to BALB/c mice. The in vitro schizont inhibition study showed that both nanorods and nanospheres exhibited concentration-dependent parasitic inhibition, wherein at lower concentrations (2 ppm), nanorods were more effective than nanospheres. However, at higher concentrations, nanospheres were found to be more effective. Nanorods showed higher chemosuppression on day 5 and day 7 than nanospheres and free artemether when studied with the Plasmodium berghei mouse model. Moreover, the survival rate of P. berghei infected mice was also found to be higher after treatment with artemether nanoformulations when compared with free artemether. In conclusion, polymeric nanorods could be a promising next-generation delivery system for the treatment of malaria.

Formation and Characterization of Oregano Essential Oil Nanocapsules Applied onto Polyester Textile

Oregano essential oil was encapsulated in poly-ϵ-caprolactone nanoparticles by a nanoprecipitation method using glycerin as a moisturizer. Nanocapsule characterization was performed by measuring the particle size, colloidal stability and encapsulation efficiency using dynamic light scattering, UV-Vis spectrophotometry and scanning electron microscopy (SEM). The nanoparticles had a mean particle size of 235 nm with a monomodal distribution. In addition, a low polydispersity index was obtained, as well as a negative zeta potential of -36.3 mV and an encapsulation efficiency of 75.54%. Nanocapsules were applied to polyester textiles through bath exhaustion and foulard processing. Citric acid and a resin were applied as crosslinking agents to improve the nanocapsules' adhesion to the fabric. The adsorption, desorption, moisture content and essential oil extraction were evaluated to determine the affinity between the nanocapsules and the polyester. The adsorption was higher when the citric acid and the resin were applied. When standard oregano nanocapsules were used, almost all of the impregnated nanoparticles were removed when washed with water. The moisture content was evaluated for treated and non-treated textiles. There was a significant increase in the moisture content of the treated polyester compared to the non-treated polyester, which indicates that the polyester hydrophilicity increased with an important absorption of the essential oil nanocapsules; this can improve fabric comfort and probably promote antibacterial properties.

Nanomedicines Bearing an Alkylating Cytostatic Drug from the Group of 1,3,5-Triazine Derivatives: Development and Characterization

Cancer is still one of the major diseases worldwide. The discovery of new drugs and the improvement of existing ones is one of the areas of priority in the fight against cancer. Dioxadet ([5-[[4,6-bis(aziridin-1-yl)-1,3,5-triazin-2-yl]amino]-2,2-dimethyl-1,3-dioxan-5-yl]methanol) represents one of the promising 1,3,5-triazine derivatives and has cytostatic activity towards ovarian cancer. In this study, we first report the development of dioxadet-bearing nanomedicines based on block-copolymers of poly(ethylene glycol) monomethyl ether (mPEG) and poly(D,L-lactic acid) (PLA)/poly(ε-caprolactone) (PCL) and then conduct an investigation into their characteristics and properties. The preparation of narrow-sized nanoparticles with a hydrodynamic diameter of 100−120 nm was optimized using a nanoprecipitation approach. Thoughtful optimization of the preparation of nanomedicines was carried out through adjustments to the polymer’s molecular weight, the pH of the aqueous medium used for nanoprecipitation, the initial drug amount in respect to the polymer, and polymer concentration in the organic phase. Under optimized conditions, spherical-shaped nanomedicines with a hydrodynamic diameter of up to 230 nm (PDI < 0.2) containing up to 592 ± 22 μg of dioxadet per mg of polymer nanoparticles were prepared. Study of the drug’s release in a model medium revealed the release up to 64% and 46% of the drug after 8 days for mPEG-b-PLA and mPEG-b-PCL, respectively. Deep analysis of the release mechanisms was carried out with the use of a number of mathematical models. The developed nanoparticles were non-toxic towards both normal (CHO-K1) and cancer (A2780 and SK-OV-3) ovarian cells. A cell cycle study revealed lesser toxicity of nanomedicines towards normal cells and increased toxicity towards cancer cells. The IC50 values determined for dioxadet nanoformulations were in the range of 0.47−4.98 μg/mL for cancer cells, which is close to the free drug’s efficacy (2.60−4.14 μg/mL). The highest cytotoxic effect was found for dioxadet loaded to mPEG-b-PCL nanoparticles.

Preparation, Characterization, and Biological Evaluation of a Hydrophilic Peptide Loaded on PEG-PLGA Nanoparticles

The encapsulation of peptides and proteins in nanosystems has been extensively investigated for masking unfavorable biopharmaceutical properties, including short half-life and poor permeation through biological membranes. Therefore, the aim of this work was to encapsulate a small antimicrobial hydrophilic peptide (H-Ser-Pro-Trp-Thr-NH2, FS10) in PEG-PLGA (polyethylene glycol-poly lactic acid-co-glycolic acid) nanoparticles (Nps) and thereby overcome the common limitations of hydrophilic drugs, which because they facilitate water absorption suffer from rapid degradation. FS10 is structurally related to the well-known RNAIII inhibiting peptide (RIP) and inhibits S. aureus biofilm formation. Various parameters, including different method (double emulsion and nanoprecipitation), pH of the aqueous phase and polymeric composition, were investigated to load FS10 into PEG-PLGA nanoparticles. The combination of different strategies resulted in an encapsulation efficiency of around 25% for both the double emulsion and the nanoprecipitation method. It was found that the most influential parameters were the pH—which tailors the peptides charge—and the polymeric composition. FS10-PEG-PLGA nanoparticles, obtained under optimized parameters, showed size lower than 180 nm with zeta potential values ranging from −11 to −21 mV. In vitro release studies showed that the Nps had an initial burst release of 48−63%, followed by a continuous drug release up to 21 h, probably caused by the porous character of the Nps. Furthermore, transmission electron microscopy (TEM) analysis revealed particles with a spherical morphology and size of around 100 nm. Antimicrobial assay showed that the minimum inhibitory concentration (MIC) of the FS10-loaded Nps, against S. aureus strains, was lower (>128 µg/mL) than that of the free FS10 (>256 µg/mL). The main goal of this work was to develop polymeric drug delivery systems aiming at protecting the peptide from a fast degradation, thus improving its accumulation in the target site and increasing the drug-bacterial membrane interactions.

In vitro antioxidant, anti-inflammatory, antimicrobial, and antidiabetic activities of synthesized chitosan-loaded p-coumaric acid nanoparticles

BACKGROUND

p-Coumaric acid is a phenolic compound widely distributed in fruits and vegetables that displays an array of therapeutic properties, including antidiabetic effects. Prominent application in diabetes is limited due to its suboptimal pharmacokinetics, poor aqueous solubility, and poor bioavailability. Nanotechnology-based delivery methods have been developed to address these limitations and improve the therapeutic uses of p-coumaric acid, and the nanoencapsulation method is emerging as a feasible alternative.

OBJECTIVE

The objective of this study is to synthesize p-coumaric acid nanoparticles (PCNPs) and to evaluate their in vitro activities.

METHODS

The PCNPs were synthesized by the nanoprecipitation method and characterized by UV-visible spectroscopy, zeta potential, Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) with dispersive energy X-ray (EDX) analysis. In addition, the PCNPs were analyzed for in vitro antioxidant activity using six different free radical scavenging assays and were also analyzed for antimicrobial, anti-inflammatory, antithrombotic, and antidiabetic effects.

RESULT

The formation of PCNPs was confirmed by UV-Visible spectra at 283 nm, and FTIR analysis revealed the reduction and capping of the chitosan nanoparticles. SEM was used to assess the size and shape of the PCNPs, and the high absorption property of the PCNPs was investigated using EDX analysis. The PCNPs had significant antioxidant, hydrogen peroxide (H2O2), lipid peroxidation (LPO), superoxide and nitric oxide (NO) radical scavenging power activities, and showed potent antimicrobial, anti-inflammatory, antithrombotic, and antidiabetic activities.

CONCLUSION

The present study suggests that PCNPs can be used as a potential medication delivery approach to provide a greater nephroprotective effect in the treatment of diabetic nephropathy. To the best of our knowledge, this is the first attempt at the synthesis of chitosan-loaded PCNPs.

Preparation of Zein-Based Nanoparticles: Nanoprecipitation versus Microfluidic-Assisted Manufacture, Effects of PEGylation on Nanoparticle Characteristics and Cellular Uptake by Melanoma Cells

Background

The manufacture of nanoparticles using manual methods is hampered by its challenging scale-up and poor reproducibility. To overcome this issue, the production of zein nanoparticles entrapping a lipophilic drug model, coumarin-6, by using a microfluidic system was assessed in this study. The influence of PEG density and chain length on zein nanoparticle characteristics, as well as their uptake efficacy in melanoma cancer cells, was also evaluated.

Methods

Zein nanoparticles were prepared by both manual and microfluidic approaches to allow comparison between the two processes. PEGylated zein nanoparticles with various PEG densities and chain lengths were produced by nanoprecipitation and characterized. Their cellular uptake was evaluated on B16F10 melanoma cancer cells in vitro.

Results

Zein nanoparticles have successfully been produced by both manual and microfluidic approaches. Parameters such as total flow rate and flow rate ratio of the aqueous and organic phases in microfluidic process, as well as the method preparation and aqueous to organic phase volume ratio during nanoprecipitation, have been shown to strongly influence the characteristics of the resulting nanoparticles. Continuous microfluidics led to the production of nanoparticles with low yield and drug entrapment, unlike nanoprecipitation, which resulted in zein nanoparticles with an appropriate size and an optimal drug entrapment efficiency of 64%. The surface modification of the nanoparticles produced by nanoprecipitation, with lower PEG density and shorter PEG chain length made mPEG5K-zein (0.5:1) the most favorable formulation in our study, resulting in enhanced stability and higher coumarin-6 uptake by melanoma cancer cells.

Conclusion

mPEG5K-zein (0.5:1) nanoparticles prepared by nanoprecipitation were the most promising formulation in our study, exhibiting increased stability and enhancing coumarin-6 uptake by melanoma cancer cells.

Photoactivated Organic Nanomachines for Programmable Enhancement of Antitumor Efficacy

Limited permeability in solid tumors significantly restricts the anticancer efficacy of nanomedicines. Light-driven nanomotors powered by photothermal converting engines are appealing carriers for directional drug delivery and simultaneous phototherapy. Nowadays, it is still a great challenge to construct metal-free photothermal nanomotors for a programmable anticancer treatment. Herein, one kind of photoactivated organic nanomachines is reported with asymmetric geometry assembled by light-to-heat converting semiconducting polymer engine and macromolecular anticancer payload through a straightforward nanoprecipitation process. The NIR-fueled polymer engine can be remotely controlled to power the nanomachines for light-driven thermophoresis in the liquid media and simultaneously thermal ablating the cancer cells. The great manipulability of the nanomachines allows for programming of their self-propulsion in the tumor microenvironment for effectively improving cellular uptake and tumor penetration of the anticancer payload. Taking the benefit from this behavior, a programmed treatment process is established at a low drug dose and a low photothermal temperature for significantly enhancing the antitumor efficacy.

Volumetric Scalability of Microfluidic and Semi-Batch Silk Nanoprecipitation Methods

Silk fibroin nanoprecipitation by organic desolvation in semi-batch and microfluidic formats provides promising bottom-up routes for manufacturing narrow polydispersity, spherical silk nanoparticles. The translation of silk nanoparticle production to pilot, clinical, and industrial scales can be aided through insight into the property drifts incited by nanoprecipitation scale-up and the identification of critical process parameters to maintain throughout scaling. Here, we report the reproducibility of silk nanoprecipitation on volumetric scale-up in low-shear, semi-batch systems and estimate the reproducibility of chip parallelization for volumetric scale-up in a high shear, staggered herringbone micromixer. We showed that silk precursor feeds processed in an unstirred semi-batch system (mixing time > 120 s) displayed significant changes in the nanoparticle physicochemical and crystalline properties following a 12-fold increase in volumetric scale between 1.8 and 21.9 mL while the physicochemical properties stayed constant following a further 6-fold increase in scale to 138 mL. The nanoparticle physicochemical properties showed greater reproducibility after a 6-fold volumetric scale-up when using lower mixing times of greater similarity (8.4 s and 29.4 s) with active stirring at 400 rpm, indicating that the bulk mixing time and average shear rate should be maintained during volumetric scale-up. Conversely, microfluidic manufacture showed high between-batch repeatability and between-chip reproducibility across four participants and microfluidic chips, thereby strengthening chip parallelization as a production strategy for silk nanoparticles at pilot, clinical, and industrial scales.

Making Ultra-Tough Nanoceramics by Columnar Submicrocrystals with Three-Level Micro-Nano Structures

The low fracture toughness of equiaxed nanocrystalline ceramics is the main bottleneck of its wide range of commercial applications. Here, the authors report a method to overcome this limitation for preparing ultra-tough nanoceramics from using amorphous and supersaturated Al₂ O₃ /ZrO₂ solid solution micro-powders, which is fabricated by Al-O₂ ultrahigh-temperature combustion synthesis assisted rapid water cooling. The Al₂ O₃ /ZrO₂ micro-powders containing amorphous and metastable dendritic solid solutions can induce the three-level micro-nano structure (submicro/nano/supra-nano) of the high-content (up to 70-90%) columnar submicro-crystals accompanied with high-density nanoprecipitation after sintering or annealing, which makes the fracture toughness of Al₂ O₃ /ZrO₂ ceramics with a unique combination of high-strength and high-hardness increased by 50-100%. This method is beneficial to microstructural design of high-performance ceramics and can be widely applied to various ceramic systems, coupled with simplicity, low-cost, and high-efficiency, making it suitable to industrially produce large-sized nanoceramics with specific grain geometry in large quantities.

Pioglitazone-Loaded PLGA Nanoparticles: Towards the Most Reliable Synthesis Method

Recent findings have proved the benefits of Pioglitazone (PGZ) against atherosclerosis and type 2 diabetes. Since the systematic and controllable release of this drug is of significant importance, encapsulation of this drug in nanoparticles (NPs) can minimize uncontrolled issues. In this context, drug delivery approaches based on several poly(lactic-co-glycolic acid) (PLGA) nanoparticles have been rising in popularity due to their promising capabilities. However, a fully reliable and reproducible synthetic methodology is still lacking. In this work, we present a rational optimization of the most critical formulation parameters for the production of PGZ-loaded PLGA NPs by the single emulsification-solvent evaporation or nanoprecipitation methods. We examined the influence of several variables (e.g., component concentrations, phases ratio, injection flux rate) on the synthesis of the PGZ-NPs. In addition, a comparison of these synthetic methodologies in terms of nanoparticle size, polydispersity index (PDI), zeta potential (ζ_p), drug loading (DL%), entrapment efficiency (EE%), and stability is offered. According to the higher entrapment efficiency content, enhanced storage time and suitable particle size, the nanoprecipitation approach appears to be the simplest, most rapid and most reliable synthetic pathway for these drug nanocarriers, and we demonstrated a very slow drug release in PBS for the best formulation obtained by this synthesis.

Exploring Various Techniques for the Chemical and Biological Synthesis of Polymeric Nanoparticles

Nanoparticles (NPs) have remarkable properties for delivering therapeutic drugs to the body’s targeted cells. NPs have shown to be significantly more efficient as drug delivery carriers than micron-sized particles, which are quickly eliminated by the immune system. Biopolymer-based polymeric nanoparticles (PNPs) are colloidal systems composed of either natural or synthetic polymers and can be synthesized by the direct polymerization of monomers (e.g., emulsion polymerization, surfactant-free emulsion polymerization, mini-emulsion polymerization, micro-emulsion polymerization, and microbial polymerization) or by the dispersion of preformed polymers (e.g., nanoprecipitation, emulsification solvent evaporation, emulsification solvent diffusion, and salting-out). The desired characteristics of NPs and their target applications are determining factors in the choice of method used for their production. This review article aims to shed light on the different methods employed for the production of PNPs and to discuss the effect of experimental parameters on the physicochemical properties of PNPs. Thus, this review highlights specific properties of PNPs that can be tailored to be employed as drug carriers, especially in hospitals for point-of-care diagnostics for targeted therapies.

Nanoprecipitation technology to prepare carrier systems of interest in pharmaceutics: An overview of patenting

Nanoprecipitation is a practical method to prepare carriers at the nanometric scale, which attracts attention in pharmaceutics because of its low cost, easy setup, the versatility of the starting materials, possibility to obtain different kinds of carriers, and minimal environmental impact. Since 1986, this technique has been extensively employed in research; therefore, this paper focuses on state of art regarding inventions wherein it is employed. To this end, 133 nanoprecipitation-based patent families are identified in the PatSnap® platform, which allows identifying general trends. Afterwards, a sample of 40 patent families reported as granted (21 families) or patent applications (19 families) during the last decade are studied in depth to establish the research tendencies. Undoubtedly, Chinese universities are positioned as leaders in this field, and cancer treatments are the more claimed use followed far behind for developments targeting neurodegenerative and diabetes diseases. New proposals on targeted and stimuli response particles are also claimed, and development of polymers, prodrugs, and improvements to the technique such as the flash-nanoprecipitation, use of microfluidics, or design of green process are relevant. Interestingly, nanoprecipitation-related patent families have significantly increased during the last decade, being the 71% of the total, which makes alluring the perspectives about its industrial harnessing.

Synthesis of Uniform Polymer Encapsulated Organic Nanocrystals through Ouzo Nanocrystallization

Nanocrystals (NCs) are widely used in optoelectronics, photocatalysis, and bioimaging. As the surface area to volume ratio increases with a decrease in the size of NCs, strategies to control the size of NCs are highly valuable for many applications. Given the importance of photoluminescent dyes, especially those with aggregation-induced emission, the transformation from an amorphous to a crystalline state can yield a drastic enhancement in their optical properties, which is of significance for biomedical applications. Till now, there is no general method available for the synthesis of small NCs with accurate control over the size and uniformity. Herein, a simple and general approach of ouzo nanocrystallization is presented for the synthesis of small (<100 nm) and highly uniform (polydispersity index~0.1) NCs with good control over the size. The process of nanoprecipitation is used to synthesize uniform nanoparticles (NPs) with different size, which is followed by solvent addition to form swollen NPs. Further, the amorphous core of swollen NPs is converted into NCs within polymer shell under Ouzo zone, which restricts NCs to grow above certain size. To demonstrate the general applicability of ouzo nanocrystallization, two different classes of luminescent materials are used as examples to fabricate small and highly uniform NCs.

Nanoprecipitation of Biocompatible Poly(malic acid) Derivative, Its Ability to Encapsulate a Molecular Photothermal Agent and Photothermal Properties of the Resulting Nanoparticles

Biocompatible nanoparticles (NPs) of hydrophobic poly(benzyl malate) (PMLABe) were prepared by nanoprecipitation. The influence of nanoprecipitation parameters (initial PMLABe, addition rate, organic solvent/water ratio and stirring speed) were studied to optimize the resulting formulations in terms of hydrodynamic diameter (Dh) and dispersity (PDI). PMLABe NPs with a Dh of 160 nm and a PDI of 0.11 were isolated using the optimized nanoprecipitation conditions. A hydrophobic near infra-red (NIR) photothermally active nickel-bis(dithiolene) complex (Ni8C12) was then encapsulated into PMLABe NPs using the optimized nanoprecipitation conditions. The size and encapsulation efficiency of the NPs were measured, revealing that up to 50 weight percent (wt%) of Ni8C12 complex can efficiently be encapsulated with a slight increase in Dh of the corresponding Ni8C12-loaded NPs. Moreover, we have shown that NP encapsulating Ni8C12 were stable under storage conditions (4 °C) for at least 10 days. Finally, the photothermal properties of Ni8C12-loaded NPs were evaluated and a high photothermal efficiency (62.7 ± 6.0%) waswas measured with NPs incorporating 10 wt% of the Ni8C12 complex.

Spherical Cellulose Micro and Nanoparticles: A Review of Recent Developments and Applications

Cellulose, the most abundant natural polymer, is a versatile polysaccharide that is being exploited to manufacture innovative blends, composites, and hybrid materials in the form of membranes, films, coatings, hydrogels, and foams, as well as particles at the micro and nano scales. The application fields of cellulose micro and nanoparticles run the gamut from medicine, biology, and environment to electronics and energy. In fact, the number of studies dealing with sphere-shaped micro and nanoparticles based exclusively on cellulose (or its derivatives) or cellulose in combination with other molecules and macromolecules has been steadily increasing in the last five years. Hence, there is a clear need for an up-to-date narrative that gathers the latest advances on this research topic. So, the aim of this review is to portray some of the most recent and relevant developments on the use of cellulose to produce spherical micro- and nano-sized particles. An attempt was made to illustrate the present state of affairs in terms of the go-to strategies (e.g., emulsification processes, nanoprecipitation, microfluidics, and other assembly approaches) for the generation of sphere-shaped particles of cellulose and derivatives thereof. A concise description of the application fields of these cellulose-based spherical micro and nanoparticles is also presented.

Encapsulation of Large-Size Plasmids in PLGA Nanoparticles for Gene Editing: Comparison of Three Different Synthesis Methods

The development of new gene-editing technologies has fostered the need for efficient and safe vectors capable of encapsulating large nucleic acids. In this work we evaluate the synthesis of large-size plasmid-loaded PLGA nanoparticles by double emulsion (considering batch ultrasound and microfluidics-assisted methodologies) and magnetic stirring-based nanoprecipitation synthesis methods. For this purpose, we characterized the nanoparticles and compared the results between the different synthesis processes in terms of encapsulation efficiency, morphology, particle size, polydispersity, zeta potential and structural integrity of loaded pDNA. Our results demonstrate particular sensibility of large pDNA for shear and mechanical stress degradation during double emulsion, the nanoprecipitation method being the only one that preserved plasmid integrity. However, plasmid-loaded PLGA nanoparticles synthesized by nanoprecipitation did not show cell expression in vitro, possibly due to the slow release profile observed in our experimental conditions. Strong electrostatic interactions between the large plasmid and the cationic PLGA used for this synthesis may underlie this release kinetics. Overall, none of the methods evaluated satisfied all the requirements for an efficient non-viral vector when applied to large-size plasmid encapsulation. Further optimization or alternative synthesis methods are thus in current need to adapt PLGA nanoparticles as delivery vectors for gene editing therapeutic technologies.

Modified Desolvation Method Enables Simple One-Step Synthesis of Gelatin Nanoparticles from Different Gelatin Types with Any Bloom Values

Gelatin nanoparticles found numerous applications in drug delivery, bioimaging, immunotherapy, and vaccine development as well as in biotechnology and food science. Synthesis of gelatin nanoparticles is usually made by a two-step desolvation method, which, despite providing stable and homogeneous nanoparticles, has many limitations, namely complex procedure, low yields, and poor reproducibility of the first desolvation step. Herein, we present a modified one-step desolvation method, which enables the quick, simple, and reproducible synthesis of gelatin nanoparticles. Using the proposed method one can prepare gelatin nanoparticles from any type of gelatin with any bloom number, even with the lowest ones, which remains unattainable for the traditional two-step technique. The method relies on quick one-time addition of poor solvent (preferably isopropyl alcohol) to gelatin solution in the absence of stirring. We applied the modified desolvation method to synthesize nanoparticles from porcine, bovine, and fish gelatin with bloom values from 62 to 225 on the hundreds-of-milligram scale. Synthesized nanoparticles had average diameters between 130 and 190 nm and narrow size distribution. Yields of synthesis were 62-82% and can be further increased. Gelatin nanoparticles have good colloidal stability and withstand autoclaving. Moreover, they were non-toxic to human immune cells.

Microfluidic Technology for the Production of Hybrid Nanomedicines

Microfluidic technologies have recently been applied as innovative methods for the production of a variety of nanomedicines (NMeds), demonstrating their potential on a global scale. The capacity to precisely control variables, such as the flow rate ratio, temperature, total flow rate, etc., allows for greater tunability of the NMed systems that are more standardized and automated than the ones obtained by well-known benchtop protocols. However, it is a crucial aspect to be able to obtain NMeds with the same characteristics of the previously optimized ones. In this study, we focused on the transfer of a production protocol for hybrid NMeds (H-NMeds) consisting of PLGA, Cholesterol, and Pluronic® F68 from a benchtop nanoprecipitation method to a microfluidic device. For this aim, we modified parameters such as the flow rate ratio, the concentration of core materials in the organic phase, and the ratio between PLGA and Cholesterol in the feeding organic phase. Outputs analysed were the chemico-physical properties, such as size, PDI, and surface charge, the composition in terms of %Cholesterol and residual %Pluronic® F68, their stability to lyophilization, and the morphology via atomic force and electron microscopy. On the basis of the results, even if microfluidic technology is one of the unique procedures to obtain industrial production of NMeds, we demonstrated that the translation from a benchtop method to a microfluidic one is not a simple transfer of already established parameters, with several variables to be taken into account and to be optimized.

Self-Assembled Chromogenic Polymeric Nanoparticle-Laden Nanocarrier as a Signal Carrier for Derivative Binary Responsive Virus Detection

In the current biosensor, the signal generation is limited to single virus detection in the reaction chamber. An adaptive strategy is required to enable the recognition of multiple viruses for diagnostics and surveillance. In this work, a nanocarrier is deployed to bring specific signal amplification into the biosensor, depending on the target viruses. The nanocarrier is designed using pH-sensitive polymeric nanoparticle-laden nanocarriers (PNLNs) prepared by sequential nanoprecipitation. The nanoprecipitation of two chromogens, phenolphthalein (PP) and thymolphthalein (TP), is investigated in three different solvent systems in which PNLNs demonstrate a high loading of the chromogen up to 59.75% in dimethylformamide (DMF)/dimethyl sulfoxide (DMSO)/ethanol attributing to the coprecipitation degree of the chromogens and the polymer. The PP-encapsulated PNLNs (PP@PNLNs) and TP-encapsulated PNLNs (TP@PNLNs) are conjugated to antibodies specific to target viruses, influenza virus A subtype H1N1 (IV/A/H1N1) and H3N2 (IV/A/H3N2), respectively. After the addition of anti-IV/A antibody-conjugated magnetic nanoparticles (MNPs) and magnetic separation, the enriched PNLNs/virus/MNPs sandwich structure is treated in an alkaline solution. It demonstrates a synergy reaction in which the degradation of the polymeric boundary and the pH-induced colorimetric development of the chromogen occurred. The derivative binary biosensor shows feasible detection on IV/A with excellent specificities of PP@PNLNs on IV/A/H1N1 and TP@PNLNs on IV/A/H3N2 with LODs of 27.56 and 28.38 fg mL^-1, respectively. It intrigues the distinguished analytical signal in human serum with a variance coefficient of 25.8% and a recovery of 93.6-110.6% for one-step subtype influenza virus detection.

Jin Shofu Starch Nanoparticles for the Consolidation of Modern Paintings

Matte, porous, and weakly bound paint layers, typically found in modern/contemporary art, represent an unsolved conservation challenge. Current conservation practice relies on synthetic or natural adhesives that can alter dramatically the optical properties of paints. Alternatively, we propose a novel nanostructured consolidant based on starch, a renewable natural polymer. We synthesized starch nanoparticles (SNPs) to boost their penetration into the porous painted layers; upon solvent evaporation, the particles were expected to adhere to the pigments thanks to their large surface area and abundant -OH groups. The SNPs were formulated through a bottom-up approach, where gluten-removed Jin Shofu wheat starch was gelatinized and then precipitated in a nonsolvent. The low gelatinization temperature of wheat starch is likely key to favor disassembly in alkali and reassembly in the nonsolvent. The synthesis conditions can be tuned to obtain amorphous SNPs of ca. 50 nm with acceptable polydispersity. The particles swell in water to form nanosized gel-like fractal domains (as observed with cryogenic electron microscopy), formed by the organization of smaller units in polymer-rich and -deficient regions. Aqueous and hydroalcoholic particles' dispersions were assessed on aged ultramarine blue mock-ups that mimic degraded modern/contemporary paints. The consolidation effectiveness was evaluated with a specifically designed in-house protocol: the SNPs distribute across the paint section and strongly increase pigments' cohesion while preserving the original optical properties of the painted layer, as opposed to dispersions of bulk starch that simply accumulate on the paint surface, forming superficial glossy films. The Jin Shofu SNPS proved to be a new promising tool for the consolidation of weakened paintings, opening perspectives in the formulation and application of consolidants for modern and contemporary art.

Phenolic Hydroxyl Groups in the Lignin Polymer Affect the Formation of Lignin Nanoparticles

Alkaline soda lignin (AL) was sequentially fractionated into six fractions of different molecular size by means of solvent extraction and their phenolic hydroxyl groups were chemoselectively methylated to determine their effect on nanoparticle formation of lignin polymers. The effect of the lignin structure on the physical properties of nanoparticles was also clarified in this study. Nanoparticles were obtained from neat alkaline soda lignin (ALNP), solvent-extracted fractions (FALNPs, i.d. 414–1214 nm), and methylated lignins (MALNPs, i.d. 516–721 nm) via the nanoprecipitation method. Specifically, the size properties of MALNPs showed a high negative correlation (R² = 0.95) with the phenolic hydroxyl group amount. This indicates that the phenolic hydroxyl groups in lignin could be influenced on the nucleation or condensation during the nanoprecipitation process. Lignin nanoparticles exhibited high colloidal stability, and most of them also showed good in vitro cell viability. This study presents a possible way to control nanoparticle size by blocking specific functional groups and decreasing the interaction between hydroxyl groups of lignin.

Cefotaxime Loaded Polycaprolactone Based Polymeric Nanoparticles with Antifouling Properties for In-Vitro Drug Release Applications

The objective of the present study was to achieve the successful encapsulation of a therapeutic agent to achieve antifouling functionality regarding biomedical applications. Considering nanotechnology, drug-loaded polycaprolactone (PCL)-based nanoparticles were prepared using a nano-precipitation technique by optimizing various process parameters. The resultant nano-formulations were investigated for in vitro drug release and antifouling applications. The prepared particles were characterized in terms of surface morphology and surface properties. Optimized blank and drug-loaded nanoparticles had an average size of 200 nm and 216 nm, respectively, with associated charges of -16.8 mV and -11.2 mV. Studies of the in vitro release of drug were carried out, which showed sustained release at two different pH, 5.5 and 7.4 Antifouling activity was observed against two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. The zone of inhibition of the optimized polymeric drug-loaded nanoparticle F-25 against both strains were compared with the pure drug. The gradual pH-responsive release of antibiotics from the biodegradable polymeric nanoparticles could significantly increase the efficiency and pharmacokinetics of the drug as compared to the pure drug. The acquired data significantly noted that the resultant nano-encapsulation of antifouling functionality could be a promising candidate for topical drug delivery systems and skin applications.

In Vitro Interaction of Doxorubicin-Loaded Silk Sericin Nanocarriers with MCF-7 Breast Cancer Cells Leads to DNA Damage

In this paper, Bombyx mori silk sericin nanocarriers with a very low size range were obtained by nanoprecipitation. Sericin nanoparticles were loaded with doxorubicin, and they were considered a promising tool for breast cancer therapy. The chemistry, structure, morphology, and size distribution of nanocarriers were investigated by Fourier transformed infrared spectroscopy (FTIR–ATR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and dynamic light scattering (DLS). Morphological investigation and DLS showed the formation of sericin nanoparticles in the 25–40 nm range. FTIR chemical characterization showed specific interactions of protein–doxorubicin–enzymes with a high influence on the drug delivery process and release behavior. The biological investigation via breast cancer cell line revealed a high activity of nanocarriers in cancer cells by inducing significant DNA damage.

Amphiphilic Polymer Nanoreactors for Multiple Step, One-Pot Reactions and Spontaneous Product Separation

Performing multiple reaction steps in "one pot" to avoid the need to isolate intermediates is a promising approach for reducing solvent waste associated with liquid phase chemical processing. In this work, we incorporated gold nanoparticle catalysts into polymer nanoreactors via amphiphilic block copolymer directed self-assembly. With the polymer nanoreactors dispersed in water as the bulk solvent, we demonstrated the ability to facilitate two reaction steps in one pot with spontaneous precipitation of the product from the reaction mixture. Specifically, we achieved imide synthesis from 4-nitrophenol and benzaldehyde as a model reaction. The reaction occured in water at ambient conditions; the desired 4-benzylideneaminophenol product spontaneously precipitated from the reaction mixture while the nanoreactors remained stable in dispersion. A 65% isolated yield was achieved. In contrast, PEGylated gold nanoparticles and citrate stabilized gold nanoparticles precipitated with the reaction product, which would complicate both the isolation of the product as well as reuse of the catalyst. Thus, amphiphilic nanoreactors dispersed in water are a promising approach for reducing solvent waste associated with liquid phase chemical processing by using water as the bulk solvent, eliminating the need to isolate intermediates, achieving spontaneous product separation to facilitate the recycling of the reaction mixture, and simplifying the isolation of the desired product.

Excipient-Free Pure Drug Nanoparticles Fabricated by Microfluidic Hydrodynamic Focusing

Nanoprecipitation is one of the most versatile methods to produce pure drug nanoparticles (PDNPs) owing to the ability to optimize the properties of the product. Nevertheless, nanoprecipitation may result in broad particle size distribution, low physical stability, and batch-to-batch variability. Microfluidics has emerged as a powerful tool to produce PDNPs in a simple, reproducible, and cost-effective manner with excellent control over the nanoparticle size. In this work, we designed and fabricated T- and Y-shaped Si-made microfluidic devices and used them to produce PDNPs of three kinase inhibitors of different lipophilicity and water-solubility, namely imatinib, dasatinib and tofacitinib, without the use of colloidal stabilizers. PDNPs display hydrodynamic diameter in the 90-350 nm range as measured by dynamic light scattering and a rounded shape as visualized by high-resolution scanning electron microscopy. Powder X-ray diffraction and differential scanning calorimetry confirmed that this method results in highly amorphous nanoparticles. In addition, we show that the flow rate of solvent, the anti-solvent, and the channel geometry of the device play a key role governing the nanoparticle size.

Review of Waterborne Organic Semiconductor Colloids for Photovoltaics

Development of carbon neutral and sustainable energy sources should be considered as a top priority solution for the growing worldwide energy demand. Photovoltaics are a strong candidate, more specifically, organic photovoltaics (OPV), enabling the design of flexible, lightweight, semitransparent, and low-cost solar cells. However, the active layer of OPV is, for now, mainly deposited from chlorinated solvents, harmful for the environment and for human health. Active layers processed from health and environmentally friendly solvents have over recent years formed a key focus topic of research, with the creation of aqueous dispersions of conjugated polymer nanoparticles arising. These nanoparticles are formed from organic semiconductors (molecules and macromolecules) initially designed for organic solvents. The topic of nanoparticle OPV has gradually garnered more attention, up to a point where in 2018 it was identified as a "trendsetting strategy" by leaders in the international OPV research community. Hence, this review has been prepared to provide a timely roadmap of the formation and application of aqueous nanoparticle dispersions of active layer components for OPV. We provide a thorough synopsis of recent developments in both nanoprecipitation and miniemulsion for preparing photovoltaic inks, facilitating readers in acquiring a deep understanding of the crucial synthesis parameters affecting particle size, colloidal concentration, ink stability, and more. This review also showcases the experimental levers for identifying and optimizing the internal donor-acceptor morphology of the nanoparticles, featuring cutting-edge X-ray spectromicroscopy measurements reported over the past decade. The different strategies to improve the incorporation of these inks into OPV devices and to increase their efficiency (to the current record of 7.5%) are reported, in addition to critical design choices of surfactant type and the advantages of single-component vs binary nanoparticle populations. The review naturally culminates by presenting the upscaling strategies in practice for this environmentally friendly and safer production of solar cells.

Improved Controlled Release and Brain Penetration of the Small Molecule S14 Using PLGA Nanoparticles

Phosphodiesterase 7 (PDE7) is an enzyme responsible for the degradation of cyclic adenosine monophosphate (cAMP), an important cellular messenger. PDE7’s role in neurotransmission, expression profile in the brain and the druggability of other phosphodiesterases have motivated the search for potent inhibitors to treat neurodegenerative and inflammatory diseases. Different heterocyclic compounds have been described over the years; among them, phenyl-2-thioxo-(1H)-quinazolin-4-one, called S14, has shown very promising results in different in vitro and in vivo studies. Recently, polymeric nanoparticles have been used as new formulations to target specific organs and produce controlled release of certain drugs. In this work, we describe poly(lactic-co-glycolic acid) (PLGA)-based polymeric nanoparticles loaded with S14. Their preparation, optimization, characterization and in vivo drug release profile are here presented as an effort to improve pharmacokinetic properties of this interesting PDE7 inhibitor.

PLGA Based Nanospheres as a Potent Macrophage-Specific Drug Delivery System

Macrophages possess an innate ability to scavenge heterogenous objects from the systemic circulation and to regulate inflammatory diseases in various organs via cytokine production. That makes them attractive targets for nanomedicine-based therapeutic approaches to inflammatory diseases. In the present study, we have prepared several different poly(lactic-co-glycolic acid) (PLGA) polymer nanospheres for macrophage-targeted drug delivery using both nanoprecipitation and emulsification solvent evaporation methods. Two experimental linear PLGA polymers with relatively low molar weight, one experimental branched PLGA with unique star-like molecular architecture, and a commercially available PLGA, were used for nanosphere formulation and compared to their macrophage uptake capacity. The nanosphere formulations labelled with loaded fluorescent dye Rhodamine B were further tested in mouse bone marrow-derived macrophages and in hepatocyte cell lines AML-12, HepG2. We found that nanospheres larger than 100 nm prepared using nanoprecipitation significantly enhanced distribution of fluorescent dye selectively into macrophages. No effects of nanospheres on cellular viability were observed. Additionally, no significant proinflammatory effect after macrophage exposure to nanospheres was detected as assessed by a determination of proinflammatory cytokines Il-1β and Tnfα mRNA. All experimental PLGA nanoformulations surpassed the nanospheres obtained with the commercially available polymer taken as a control in their capacity as macrophage-specific carriers.

Increasing Brain Permeability of PHA-767491, a Cell Division Cycle 7 Kinase Inhibitor, with Biodegradable Polymeric Nanoparticles

A potent cell division cycle 7 (CDC7) kinase inhibitor, known as PHA-767491, has been described to reduce the transactive response DNA binding protein of 43 KDa (TDP-43) phosphorylation in vitro and in vivo, which is one of the main proteins found to aggregate and accumulate in the cytoplasm of motoneurons in amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) patients. However, the main drawback of this compound is its low permeability to the central nervous system (CNS), limiting its use for the treatment of neurological conditions. In this context, the use of drug delivery systems like nanocarriers has become an interesting approach to improve drug release to the CNS. In this study, we prepared and characterized biodegradable nanoparticles in order to encapsulate PHA-767491 and improve its permeability to the CNS. Our results demonstrate that poly (lactic-co-glycolic acid) (PLGA) nanoparticles with an average radius between 145 and 155 nm could be used to entrap PHA-767491 and enhance the permeability of this compound through the blood–brain barrier (BBB), becoming a promising candidate for the treatment of TDP-43 proteinopathies such as ALS.

Preparation and Characterization of Size-Controlled Lignin Nanoparticles with Deep Eutectic Solvents by Nanoprecipitation

Lignin nanomaterials have wide application prospects in the fields of cosmetics delivery, energy storage, and environmental governance. In this study, we developed a simple and sustainable synthesis approach to produce uniform lignin nanoparticles (LNPs) by dissolving industrial lignin in deep eutectic solvents (DESs) followed by a self-assembling process. LNPs with high yield could be obtained through nanoprecipitation. The LNPs were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Distinct LNPs could be produced by changing the type of DES, lignin sources, pre-dropping lignin concentration, and the pH of the system. Their diameter is in the range of 20–200 nm and they show excellent dispersibility and superior long-term stability. The method of preparing LNPs from lignin–DES with water as an anti-solvent is simple, rapid, and environmentally friendly. The outcome aids to further the advancement of lignin-based nanotechnology.

Silk Nanoparticle Manufacture in Semi-Batch Format

Silk nanoparticles have demonstrated utility across a range of biomedical applications, especially as drug delivery vehicles. Their fabrication by bottom-up methods such as nanoprecipitation, rather than top-down manufacture, can improve critical nanoparticle quality attributes. Here, we establish a simple semi-batch method using drop-by-drop nanoprecipitation at the lab scale that reduces special-cause variation and improves mixing efficiency. The stirring rate was an important parameter affecting nanoparticle size and yield (400 < 200 < 0 rpm), while the initial dropping height (5.5 vs 7.5 cm) directly affected nanoparticle yield. Varying the nanoparticle standing time in the mother liquor between 0 and 24 h did not significantly affect nanoparticle physicochemical properties, indicating that steric and charge stabilizations result in high-energy barriers for nanoparticle growth. Manufacture across all tested formulations achieved nanoparticles between 104 and 134 nm in size with high β-sheet content, spherical morphology, and stability in aqueous media for over 1 month at 4 °C. This semi-automated drop-by-drop, semi-batch silk desolvation offers an accessible, higher-throughput platform for standardization of parameters that are difficult to control using manual methodologies.

Poly-ε-caprolactone Nanoparticles Loaded with 4-Nerolidylcatechol (4-NC) for Growth Inhibition of Microsporum canis

Dermatophyte fungal infections are difficult to treat because they need long-term treatments. 4-Nerolidylcatechol (4-NC) is a compound found in Piper umbellatum that has been reported to demonstrate significant antifungal activity, but is easily oxidizable. Due to this characteristic, the incorporation in nanostructured systems represents a strategy to guarantee the compound’s stability compared to the isolated form and the possibility of improving antifungal activity. The objective of this study was to incorporate 4-NC into polymeric nanoparticles to evaluate, in vitro and in vivo, the growth inhibition of Microsporum canis. 4-NC was isolated from fresh leaves of P. umbellatum, and polymer nanoparticles of polycaprolactone were developed by nanoprecipitation using a 1:5 weight ratio (drug:polymer). Nanoparticles exhibited excellent encapsulation efficiency, and the antifungal activity was observed in nanoparticles with 4-NC incorporated. Polymeric nanoparticles can be a strategy employed for decreased cytotoxicity, increasing the stability and solubility of substances, as well as improving the efficacy of 4-NC.

Entrapment of Hydrophobic Biocides into Cellulose Acetate Nanoparticles by Nanoprecipitation

This contribution reports an efficient method for the production and use of biocide-loaded cellulose acetate nanoparticles. As well-known model biocides 4-Hexylresorcinol and Triclosan were used for in situ nanoparticle loading during a nanoprecipitation process. We show that the nanoparticle size can be well-controlled by variation of the cellulose acetate concentration during nanoprecipitation. Apart from strong evidence suggesting cellulose acetate particle formation according to a nucleation-aggregation mechanism, we further show that the biocide loading of the particles occurs by a diffusion process and not via co-precipitation. The quantity of particle loading was analyzed by ¹H-NMR spectroscopy of re-dissolved nanoparticles, and it was observed that a decisive factor for high packaging efficiency is the use of a biocide with low water solubility and high hydrophobicity. SEM studies showed no influence on the particle morphology or size by both biocides 4-Hexylresorcinol and Triclosan. Finally, an aqueous nanoparticle dispersion can be coated onto model paper sheets to yield pronounced antimicrobial surface-properties. Nanoparticles loaded with the biocide Triclosan showed a high antimicrobial activity against Bacillus subtilis, a cellulase producing bacteria, if applied to model paper substrates, even at extremely low coating weights of 1-5 g/m², respectively. Additional long-term efficacy renders these nanoparticles ideal for various applications.