Preclinical Development of Tissue-Engineered Vein Valves and Venous Substitutes using Re-Endothelialised Human Vein Matrix

Development of a dual-component infection-resistant arterial replacement for small-caliber reconstructions: A proof-of-concept study

Introduction: Synthetic vascular grafts perform poorly in small-caliber (<6mm) anastomoses, due to intimal hyperplasia and thrombosis, whereas homografts are associated with limited availability and immunogenicity, and bioprostheses are prone to aneurysmal degeneration and calcification. Infection is another important limitation with vascular grafting. This study developed a dual-component graft for small-caliber reconstructions, comprising a decellularized tibial artery scaffold and an antibiotic-releasing, electrospun polycaprolactone (PCL)/polyethylene glycol (PEG) blend sleeve. Methods: The study investigated the effect of nucleases, as part of the decellularization technique, and two sterilization methods (peracetic acid and γ-irradiation), on the scaffold's biological and biomechanical integrity. It also investigated the effect of different PCL/PEG ratios on the antimicrobial, biological and biomechanical properties of the sleeves. Tibial arteries were decellularized using Triton X-100 and sodium-dodecyl-sulfate. Results: The scaffolds retained the general native histoarchitecture and biomechanics but were depleted of glycosaminoglycans. Sterilization with peracetic acid depleted collagen IV and produced ultrastructural changes in the collagen and elastic fibers. The two PCL/PEG ratios used (150:50 and 100:50) demonstrated differences in the structural, biomechanical and antimicrobial properties of the sleeves. Differences in the antimicrobial activity were also found between sleeves fabricated with antibiotics supplemented in the electrospinning solution, and sleeves soaked in antibiotics. Discussion: The study demonstrated the feasibility of fabricating a dual-component small-caliber graft, comprising a scaffold with sufficient biological and biomechanical functionality, and an electrospun PCL/PEG sleeve with tailored biomechanics and antibiotic release.

Advances in Engineering Venous Valves: The Pursuit of a Definite Solution for Chronic Venous Disease

Native venous valves enable proper return of blood to the heart. Under pathological conditions (e.g., chronic venous insufficiency), venous valves malfunction and fail to prevent backward flow. Clinically, this can result in painful swelling, varicose veins, edema, and skin ulcerations leading to a chronic wound situation. Surgical correction of venous valves has proven to drastically reduce these symptoms. However, the absence of intact leaflets in many patients limits the applicability of this strategy. In this context, the development of venous valve replacements represents an appealing approach. Despite acceptable results in animal models, no venous valve has succeeded in clinical trials, and so far no single prosthetic venous valve is commercially available. This calls for advanced materials and fabrication approaches to develop clinically relevant venous valves able to restore natural flow conditions in the venous circulation. In this study, we critically discuss the approaches attempted in the last years, and we highlight the potential of tissue engineering to offer new avenues for valve fabrication. Impact statement Venous valves prosthesis offer the potential to restore normal venous flow, and to improve the prospect of patients that suffer from chronic venous disease. Current venous valve replacements are associated with poor outcomes. A deeper understanding of the approaches attempted so far is essential to establish the next steps toward valve development, and importantly, tissue engineering constitutes a unique toolbox to advance in this quest.

Point-of-Care Adipose-Derived Stromal Vascular Fraction Cell Isolation and Expanded Polytetrafluoroethylene Graft Sodding

Adipose-derived stromal vascular fraction (SVF) cell populations are being evaluated for numerous clinical applications. The current study evaluated a point-of-care technology, the Tissue Genesis "TGI 1000" Cell Isolation System™, to perform an automated isolation of adipose-derived SVF cells to be used in the fabrication of a tissue-engineered vascular graft in the operating room. A total of seven patients were enrolled in this study and received femoral to tibial expanded polytetrafluoroethylene bypass grafts to treat peripheral arterial disease. Lipoaspiration of fat was performed on five patients, and the fat sample was processed immediately in the automated system in the operating room. The mean processing time, from the point of fat delivery into the instrument to removal of the SVF-containing syringe, was 70 min. The SVF cell population was evaluated for cell yield, cell viability, endotoxin levels, and microbial contamination. Samples of the SVF preparation were further subjected to microbiologic evaluation both microscopically before implantation of the graft and through a microbiologic screening using aerobic and anaerobic culture conditions. Mean cell yield was 1E5 cells per cc of fat, and endotoxin levels were below the FDA recognized standards. All SVF preparations were released for graft preparation, and the intimal surface of 90-cm-long grafts was pressure sodded with cells at a concentration of 2E5 cells/cm². The sodded grafts (n = 5) and control grafts (n = 2) were immediately implanted and graft patency assessed for 1 year. One year patency was 60% for sodded grafts and 50% for control grafts. Automated preparation of autologous adipose-derived SVF cells for immediate use to create cellular linings on vascular grafts is feasible and safe.

Tissue Engineering of Vein Valves Based on Decellularized Natural Matrices

Valvular repair or transplantation, designed to restore the venous valve function of the legs, has been proposed as treatment in chronic venous insufficiency. Available grafts or surgeries have provided limited durability so far. Generating venous valve substitutes by means of tissue engineering could be a solution. We generated decellularized jugular ovine vein conduits containing valves (oVVC) after reseeding with ovine endothelial cells differentiated from peripheral blood-derived endothelial cells (oPBEC), cultivated in vitro corresponding to the circulatory situation in the lower leg at rest and under exertion. oVVC were decellularized by detergent treatment. GFP-labeled oPBEC were seeded onto the luminal side of the decellularized oVVC and cultivated under static-rotational conditions for 6 h (group I) and 12 h (group II), respectively. Reseeded matrices of group I were exposed to continuous low flow conditions (“leg at rest”). The tissues of group II were exposed to a gradually increasing flow (“leg under effort”). After 5 days, the grafts of group I revealed a uniform luminal endothelial cell coverage of the examined areas of the venous walls and adjacent venous valve leaflets. In group II, the cell coverage on luminal areas of the venous wall parts was found to be nearly complete. The endothelial cell coverage of adjacent venous valve leaflets was revealed to be less dense and confluent. Endothelial cells cultured on acellular vein tissues of both groups were distinctly orientated uniformly in the flow direction, clearly creating a stable and flow-orientated layer. Thus, an endothelium could successfully be reestablished on the luminal surface of a decellularized venous valve by seeding peripheral blood endothelial cells and culturing under different conditions.

Development of a bovine decellularized extracellular matrix-biomaterial for nucleus pulposus regeneration

Painful intervertebral disc (IVD) degeneration is a common cause for spinal surgery. There is a clinical need to develop injectable biomaterials capable of promoting IVD regeneration, yet many available biomaterials do not mimic the native extracellular matrix (ECM) or promote matrix production. This study aimed to develop a decellularized injectable bovine ECM material that maintains structural and compositional features of native tissue and promotes nucleus pulposus (NP) cell (NPC) and mesenchymal stem cell (MSC) adaption. Injectable decellularized ECM constructs were created using 3 NP tissue decellularization methods (con.A: sodium deoxycholate, con.B: sodium deoxycholate & sodium dodecyl sulfate, con.C: sodium deoxycholate, sodium dodecyl sulfate & TritonX-100) and evaluated for protein, microstructure, and for cell adaptation in 21 day human NPC and MSC culture experiments. Con.A was most efficient at DNA depletion, preserved best collagen microstructure and content, and maintained the highest glycosaminoglycan (GAG) content. NPCs in decellularized constructs of con.A&B demonstrated newly synthesized GAG production, which was apparent from "halos" of GAG staining surrounding seeded NPCs. Con.A also promoted MSC adaption with high cell viability and ECM production. The injectable decellularized NP biomaterial that used sodium deoxycholate without additional decellularization steps maintained native NP tissue structure and composition closest to natural ECM and promoted cellular adaptation of NP cells and MSCs. This natural decellularized biomaterial warrants further investigation for its potential as an injectable cell seeded supplement to augment NP replacement biomaterials and deliver NPCs or MSCs. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:876-888, 2016.

Human recombinant type I collagen produced in plants

As a central element of the extracellular matrix, collagen is intimately involved in tissue development, remodeling, and repair and confers high tensile strength to tissues. Numerous medical applications, particularly, wound healing, cell therapy, bone reconstruction, and cosmetic technologies, rely on its supportive and healing qualities. Its synthesis and assembly require a multitude of genes and post-translational modifications, where even minor deviations can be deleterious or even fatal. Historically, collagen was always extracted from animal and human cadaver sources, but bare risk of contamination and allergenicity and was subjected to harsh purification conditions resulting in irreversible modifications impeding its biofunctionality. In parallel, the highly complex and stringent post-translational processing of collagen, prerequisite of its viability and proper functioning, sets significant limitations on recombinant expression systems. A tobacco plant expression platform has been recruited to effectively express human collagen, along with three modifying enzymes, critical to collagen maturation. The plant extracted recombinant human collagen type I forms thermally stable helical structures, fibrillates, and demonstrates bioactivity resembling that of native collagen. Deployment of the highly versatile plant-based biofactory can be leveraged toward mass, rapid, and low-cost production of a wide variety of recombinant proteins. As in the case of collagen, proper planning can bypass plant-related limitations, to yield products structurally and functionally identical to their native counterparts.

T-cell-mediated immunological barriers to xenotransplantation

Xenotransplantion remains the most viable option for significant expansion of the donor organ pool in clinical transplantation. With the advent of nuclear transfer technologies, the production of transgenic swine has become a possibility. These animals have allowed transplant investigators to overcome humoral mechanisms of hyperacute xenograft rejection in experimental pig-to-non-human primate models. However, other immunologic barriers preclude long-term acceptance of xenografts. This review article focuses on a major feature of xenogeneic rejection: xenogeneic T cell responses. Evidence obtained from both small and large animal models, particularly those using either islet cells or kidneys, have demonstrated that T cell responses play a major role in xenogeneic rejection, and that immunosuppression alone is likely incapable of completely suppressing these responses. Additionally, both the direct and indirect pathway of antigen presentation appear to be involved in these anti donor processes. Enhanced understanding of (i) CD47 and its role in transduced xeno-bone marrow (ii) CD39 and its role in coagulation dysregulation and (iii) thymic transplantation have provided us with encouraging results. Presently, experiments evaluating the possibility of xenogeneic tolerance are underway.

[Personalized medicine and individual healthcare : Medical and information technology aspects]

The individualization of medicine and healthcare appears to be following a general societal trend. The terms "personalized medicine" and "personal health" are used to describe this process. Here it must be emphasized that personalized medicine is not limited to pharmacogenomics, but that the spectrum of personalized medicine is much broader. Applications range from individualized diagnostics, patient-specific pharmacological therapy, therapy with individual prostheses and implants to therapy approaches using autologous cells, and from patient model-based therapy in the operating room, electronic patient records through to the individual care of patients in their home environment with the use of technical systems and services. Although in some areas practical solutions have already been found, most applications will not be fully developed for many years to come. Medical and information technology are essential to personalized medicine and personal health, each driving the other forward.

Current Strategies in Cardiovascular Biomaterial Functionalization

Prevention of the coagulation cascade and platelet activation is the foremost demand for biomaterials in contact with blood. In this review we describe the underlying mechanisms of these processes and offer the current state of antithrombotic strategies. We give an overview of methods to prevent protein and platelet adhesion, as well as techniques to immobilize biochemically active molecules on biomaterial surfaces. Finally, recent strategies in biofunctionalization by endothelial cell seeding as well as their possible clinical applications are discussed.