Composition, ζ Potential, and Molar Mass Distribution of 20 Must and Wine Colloids from Five Different Cultivars Obtained during Four Consecutive Vintages

Colloids are responsible for undesirable haze formation in wine. Here, we characterized 20 colloid batches after isolation by ultrafiltration of musts and wines from five cultivars obtained from four consecutive vintages. Polysaccharide and protein concentrations of the colloids ranged from 0.10 to 0.65 and 0.03 to 0.40 mg/L, respectively. Protein profiling in must and wine colloids by fast protein liquid chromatography (FPLC) and liquid chromatography-high-resolution tandem mass spectrometry (LC-HR-MS/MS) analyses indicated a lower number of proteins in wine than in must colloids. Molar mass distribution analyses revealed all colloids to consist of two carbohydrate- (424-33,390 and 48-462 kg/mol) and one protein-rich (14-121 kg/mol) fractions. The observed barely negative ζ potentials (-3.1 to -1.1 mV) in unstable wines unraveled that colloid instability might be partly related to their poor electrostatic repulsion in the wine matrix. ζ potentials of the colloids from pH 1 to 10 are also presented. Our data support future developments to eliminate haze-forming colloids from wine.

Development of a dual-component infection-resistant arterial replacement for small-caliber reconstructions: A proof-of-concept study

Introduction: Synthetic vascular grafts perform poorly in small-caliber (<6mm) anastomoses, due to intimal hyperplasia and thrombosis, whereas homografts are associated with limited availability and immunogenicity, and bioprostheses are prone to aneurysmal degeneration and calcification. Infection is another important limitation with vascular grafting. This study developed a dual-component graft for small-caliber reconstructions, comprising a decellularized tibial artery scaffold and an antibiotic-releasing, electrospun polycaprolactone (PCL)/polyethylene glycol (PEG) blend sleeve. Methods: The study investigated the effect of nucleases, as part of the decellularization technique, and two sterilization methods (peracetic acid and γ-irradiation), on the scaffold's biological and biomechanical integrity. It also investigated the effect of different PCL/PEG ratios on the antimicrobial, biological and biomechanical properties of the sleeves. Tibial arteries were decellularized using Triton X-100 and sodium-dodecyl-sulfate. Results: The scaffolds retained the general native histoarchitecture and biomechanics but were depleted of glycosaminoglycans. Sterilization with peracetic acid depleted collagen IV and produced ultrastructural changes in the collagen and elastic fibers. The two PCL/PEG ratios used (150:50 and 100:50) demonstrated differences in the structural, biomechanical and antimicrobial properties of the sleeves. Differences in the antimicrobial activity were also found between sleeves fabricated with antibiotics supplemented in the electrospinning solution, and sleeves soaked in antibiotics. Discussion: The study demonstrated the feasibility of fabricating a dual-component small-caliber graft, comprising a scaffold with sufficient biological and biomechanical functionality, and an electrospun PCL/PEG sleeve with tailored biomechanics and antibiotic release.

Use of sucrose to diminish pore formation in freeze-dried heart valves

Freeze-dried storage of decellularized heart valves provides easy storage and transport for clinical use. Freeze-drying without protectants, however, results in a disrupted histoarchitecture after rehydration. In this study, heart valves were incubated in solutions of various sucrose concentrations and subsequently freeze-dried. Porosity of rehydrated valves was determined from histological images. In the absence of sucrose, freeze-dried valves were shown to have pores after rehydration in the cusp, artery and muscle sections. Use of sucrose reduced pore formation in a dose-dependent manner, and pretreatment of the valves in a 40% (w/v) sucrose solution prior to freeze-drying was found to be sufficient to completely diminish pore formation. The presence of pores in freeze-dried valves was found to coincide with altered biomechanical characteristics, whereas biomechanical parameters of valves freeze-dried with enough sucrose were not significantly different from those of valves not exposed to freeze-drying. Multiphoton imaging, Fourier transform infrared spectroscopy, and differential scanning calorimetry studies revealed that matrix proteins (i.e. collagen and elastin) were not affected by freeze-drying.

3D imaging of transition metals in the zebrafish embryo by X-ray fluorescence microtomography

Synchrotron X-ray fluorescence (SXRF) microtomography has emerged as a powerful technique for the 3D visualization of the elemental distribution in biological samples. The mechanical stability, both of the instrument and the specimen, is paramount when acquiring tomographic projection series. By combining the progressive lowering of temperature method (PLT) with femtosecond laser sectioning, we were able to embed, excise, and preserve a zebrafish embryo at 24 hours post fertilization in an X-ray compatible, transparent resin for tomographic elemental imaging. Based on a data set comprised of 60 projections, acquired with a step size of 2 μm during 100 hours of beam time, we reconstructed the 3D distribution of zinc, iron, and copper using the iterative maximum likelihood expectation maximization (MLEM) reconstruction algorithm. The volumetric elemental maps, which entail over 124 million individual voxels for each transition metal, revealed distinct elemental distributions that could be correlated with characteristic anatomical features at this stage of embryonic development.

Control of femtosecond thin-flap LASIK using OCT in human donor eyes

PURPOSE

Thin-flap keratomileusis is a procedure that minimizes LASIK flap thickness to preserve both the corneal epithelium and the maximum residual stroma. This study investigated the usefulness of optical coherence tomography (OCT) as a tool in guiding the femtosecond laser in the creation of a thin flap in human eyes in a non-randomized case series.

METHODS

In a private research laboratory, an in vitro investigation was performed on human autopsy eyes. Five human cadaver eyes, unsuitable for transplantation, underwent flap creation with a femtosecond laser. The laser procedure was controlled in real-time with an OCT system (Thorlabs HL AG) to ensure that the cut was placed just underneath Bowman's layer. The repetition rate of the femtosecond laser was 10 MHz with a single-pulse duration of <400 femtoseconds (pulse energy in the nJ range). As a control, all eyes underwent histological dissection and were examined using light microscopy.

RESULTS

Video monitoring of the flap creation supported the feasibility of real-time OCT monitoring of the femtosecond laser flap creation process. A clear distinction of the corneal epithelium was possible in all eyes. Bowman's layer was not identified in all donor eyes at the given resolution of the OCT device used in this study. Light microscopy demonstrated flaps approximately 50-microm thick, confirming that the real-time monitoring assured a positioning of the cutting plane at minimum distance underneath Bowman's layer.

CONCLUSIONS

This study of five human cadaver eyes shows that real-time OCT monitoring of the creation of thin-flaps in LASIK using a femtosecond laser is possible, thus ensuring that the flap is created at the desired depth.

Cloudy apple juice decreases DNA damage, hyperproliferation and aberrant crypt foci development in the distal colon of DMH-initiated rats

Clear (CleA) and cloudy (CloA) apple juices containing different amounts of analyzed procyanidins and pectin were investigated for preventive effects of colon cancer and underlying molecular mechanisms in F344 rats given intraperitoneal injections of 1,2-dimethylhydrazine (DMH; 20 mg/kg body wt) once a week for 4 weeks. Rats received either water (Cont), CleA or CloA (ad libitum) for 7 weeks starting 1 week before the first DMH injection. CloA inhibited DMH induced genotoxic damage in mucosa cells of the distal colon compared with Cont as investigated by single-cell microgel electrophoresis assay. The mean tail intensity in mucosa cells of DMH-treated controls (Cont/DMH: 6.1+/-0.9%) was significantly reduced by CloA (2.4+/-0.8%; P<0.01) but not by CleA intervention (4.1+/-1.2%; P>0.05). The crypt cell proliferation index induced by DMH (Cont/NaCl: 10.0+/-0.7%; Cont/DMH: 19.9+/-1.0%; P<0.001) was significantly decreased by CleA (15.7+/-0.7%; P<0.001) and CloA intervention (11.9+/-0.4%; P<0.001). CloA but not CleA significantly reduced the number of large aberrant crypt foci (ACF) consisting of more than four aberrant crypts (AC) (Cont/DMH: 37.4+/-5.4; CleA/DMH: 32.8+/-4.4, P>0.05; CloA/DMH: 18.8+/-2.5 ACF; P<0.05) and the overall mean ACF size in the distal colon (Cont/DMH: 2.31+/-0.09; CleA/DMH: 2.27+/-0.05; CloA/DMH: 2.04+/-0.03 AC/ACF; P<0.05). After treatment with DMH and/or apple juices there were no changes in transcript levels of colonic cyclooxygenase isoforms (COX-1, COX-2) or glutathione-associated enzymes (GST-M2, gamma-GCS, GST-P), the splenocyte natural killer cell activity and plasma antioxidant status. However, CloA but not CleA prevented the DMH-induced reduction of splenocyte CD4/CD8 (T-helper cells to cytotoxic lymphocytes) ratio. Since both formulations contained comparable concentrations and types of monomeric polyphenols, complex polyphenols or non-polyphenolic compounds, such as pectin might be responsible for the stronger cancer-preventive effect by CloA.

Degradation of apple cell wall material by commercial enzyme preparations

The action of commercial enzyme preparations on the release of cell wall constituents from alcohol-insoluble substance prepared from apples without skins and cores as well as their influence on the water binding of remaining residues is described as a model for the enzymatic cell wall destruction during production of liquid fruit products. Besides 'normal' enzyme concentrations adapted from the usual industrial dosage, 'tenfold' enzyme concentrations were applied. Dependent on enzyme spectrum and activities, concentrations of dietary fibre, e.g., pectin, increased in the soluble fractions using conditions of enzymatic 'mash treatment'. A further release of these cell wall constituents occurred when cellulase containing enzyme preparations were used under conditions of 'pomace treatment', especially with the 'tenfold' enzyme dosage. The partial enzymatic degradation of the cell wall material is connected with a decrease in water binding of the remaining residues during both simulated mash treatment of pomace treatment. Alcohol-insoluble substance from apples is a suitable model for the determination of complex enzymatic actions of enzyme preparations containing pectolytic, hemicellulolytic, and/or cellulolytic activities under standardised conditions.

Fungicide residues in strawberry processing

The fate of three fungicides (dichlofluanid, procymidone, and iprodione) applied under field conditions was studied during strawberry processing to juice, wine, and jam. An untreated control was compared to raw material treated with fungicides according to recommended doses and to a sample with 6-fold higher application rates. The highest residue values were found in the pomace after pressing. Residue values in readily produced juices and fruit wines were very low and did not exceed legally required maximum residue levels. Generally, processing steps such as pressing and clarification diminished fungicide residues from 50 to 100%. If the whole fruit is processed, as in fruit preparations or jam, the residue levels remain higher due to missing processing steps.