Five Year Outcome in Patients with End Stage Renal Disease Who Received a Bioengineered Human Acellular Vessel for Dialysis Access

Vascular Damage and Repair - Are Small-Diameter Vascular Grafts Still the "Holy Grail" of Tissue Engineering?

Cardiovascular diseases are the most important cause of morbidity and mortality in the civilized world. Stenosis or occlusion of blood vessels leads not only to events that are directly life-threatening, such as myocardial infarction or stroke, but also to a significant reduction in quality of life, for example in lower limb ischemia as a consequence of metabolic diseases. The first synthetic polymeric vascular replacements were used clinically in the early 1950s. However, they proved to be suitable only for larger-diameter vessels, where the blood flow prevents the attachment of platelets, pro-inflammatory cells and smooth muscle cells on their inner surface, whereas in smaller-diameter grafts (6 mm or less), these phenomena lead to stenosis and failure of the graft. Moreover, these polymeric vascular replacements, like biological grafts (decellularized or devitalized), are cell-free, i.e. there are no reconstructed physiological layers of the blood vessel wall, i.e. an inner layer of endothelial cells to prevent thrombosis, a middle layer of smooth muscle cells to perform the contractile function, and an outer layer to provide innervation and vascularization of the vessel wall. Vascular substitutes with these cellular components can be constructed by tissue engineering methods. However, it has to be admitted that even about 70 years after the first polymeric vascular prostheses were implanted into human patients, there are still no functional small-diameter vascular grafts on the market. The damage to small-diameter blood vessels has to be addressed by endovascular approaches or by autologous vascular substitutes, which leads to some skepticism about the potential of tissue engineering. However, new possibilities of this approach lie in the use of modern technologies such as 3D bioprinting and/or electrospinning in combination with stem cells and pre-vascularization of tissue-engineered vascular grafts. In this endeavor, sex-related differences in the removal of degradable biomaterials by the cells and in the behavior of stem cells and pre-differentiated vascular cells need to be taken into account. Key words: Blood vessel prosthesis, Regenerative medicine, Stem cells, Footprint-free iPSCs, sr-RNA, Dynamic bioreactor, Sex-related differences.

Hemodynamics and Wall Mechanics of Vascular Graft Failure

Blood vessels are subjected to complex biomechanical loads, primarily from pressure-driven blood flow. Abnormal loading associated with vascular grafts, arising from altered hemodynamics or wall mechanics, can cause acute and progressive vascular failure and end-organ dysfunction. Perturbations to mechanobiological stimuli experienced by vascular cells contribute to remodeling of the vascular wall via activation of mechanosensitive signaling pathways and subsequent changes in gene expression and associated turnover of cells and extracellular matrix. In this review, we outline experimental and computational tools used to quantify metrics of biomechanical loading in vascular grafts and highlight those that show potential in predicting graft failure for diverse disease contexts. We include metrics derived from both fluid and solid mechanics that drive feedback loops between mechanobiological processes and changes in the biomechanical state that govern the natural history of vascular grafts. As illustrative examples, we consider application-specific coronary artery bypass grafts, peripheral vascular grafts, and tissue-engineered vascular grafts for congenital heart surgery as each of these involves unique circulatory environments, loading magnitudes, and graft materials.

Macromolecular Crowding Enhances Matrix Protein Deposition in Tissue-Engineered Vascular Grafts

Successful in vitro culture of small-diameter tissue-engineered vascular grafts (TEVGs) requires rapid deposition of biomacromolecules secreted by vascular smooth muscle cells in a polyglycolic acid mesh scaffold's three-dimensional (3D) porous environment. However, common media have lower crowding conditions than in vivo tissue fluids. In addition, during the early stages of construction, most of the biomolecules secreted by the cells into the medium are lost, which negatively affects the TEVG culture process. In this study, we propose the use of macromolecular crowding (MMC) to enhance medium crowding to improve the deposition and self-assembly efficiency of major biomolecules in the early stages of TEVG culture. The addition of carrageenan significantly increased the degree of MMC in the culture medium without affecting cell viability, proliferation, and metabolic activity. Protein analysis demonstrated that the deposition of collagen types I and III and fibronectin increased significantly in the cell layers of two-dimensional and 3D smooth muscle cell cultures after the addition of a MMC agent. Collagen type I in the culture medium decreased significantly compared with that in the medium without a MMC agent. Scanning electron microscopy demonstrated that MMC agents considerably enhanced the formation of matrix protein structures during the early stages of 3D culture. Hence, MMC modifies the crowding degree of the culture medium, resulting in the rapid formation of numerous matrix proteins and fiber structures. Impact Statement Small-diameter tissue-engineered vascular grafts (TEVGs) are one of the most promising means of treating cardiovascular diseases; however, the in vitro construction of TEVGs has some limitations, such as slow deposition of extracellular matrix (ECM), long culture period, and poor mechanical properties. We hypothesized that macromolecular crowding can increase the crowding of the culture medium to construct a more bionic microenvironment, which enhances ECM deposition in the medium to the cell layer and reduces collagen loss, accelerating and enhancing TEVG culture and construction in vitro.

Outcomes of Arterial Bypass With the Human Acellular Vessel for Chronic Limb-Threatening Ischemia Performed Under the FDA Expanded Access Program

OBJECTIVE

To report outcomes of the human acellular vessel (HAV) implanted for limb salvage through the Food and Drug Administration (FDA) Expanded Access Program for patients with chronic limb-threatening ischemia with no autologous conduit.

METHODS

The HAV is a bioengineered vascular conduit designed with human vascular smooth muscle cells. The product is under regulatory study. From April 2019 to November 2021, the HAV was implanted in 14 patients (12 men; mean age, 62±14 years) at 3 US centers. Each case was performed with a single-use investigational new drug Expanded Access Program issued by the FDA. Institutional review board approval was obtained; technical and clinical outcomes were analyzed.

RESULTS

A single 6-mm-diameter (40-cm-long) HAV was implanted in 9 patients; 5 patients required 2 HAVs sewn together as a composite. Technical success was 100%. Median follow-up was 12 (range, 1 to 41) months. Primary and secondary patency rates were 72% and 81% at 12 months; assisted primary patency was attained in 4 patients. Amputation-free survival was 93% at 6 months and 77% at 12 months. All patients with a patent HAV experienced clinical improvement with no HAV-related infections or adverse events. There were 4 deaths in the cohort, late mortality unrelated to the HAV.

CONCLUSION

The HAV is a safe and effective "off-the-shelf" biologic conduit. This experience from the FDA Expanded Access Program in this population with few alternative limb salvage options will help guide regulatory deliberations for patients with lower extremity ischemia and no autologous bypass conduit options.

Expanded Utility of Human Acellular Vessel in Hemodialysis Access Surgery and Arterial Aneurysm Repair

Vascular access is essential for hemodialysis (HD) in patients with end-stage renal disease (ESRD). When the standard of care arteriovenous fistula (AVF) is limited, secondary to aneurysmal degeneration, trauma, and thrombus, interposition grafting is a reasonable reconstruction approach. As these grafts and comorbidities place ESRD patients at sustained risk of complications, reconstructions with regenerative medicine biologic conduits hold promise in improving safety and efficacy. Here, a biocompatible human acellular vessel (HAV) is our conduit of interest. With United States Food and Drug Administration use authorization under the Expanded Access Program, we report three cases of complex vascular access surgery with four aneurysm repairs using HAV. Patient selection focused on meeting unmet needs for those without adequate care alternatives, including active access and endoprosthetic stent graft infections, right heart failure due to high-output AVF, and arterial and access outflow aneurysms. In this high-risk expanded access population, operative technical success and interval success for patients given their inherent comorbidities, offer potential expanded utility of HAV in HD access surgery and arterial aneurysm repair.

Modulation of Smooth Muscle Cell Phenotype for Translation of Tissue-Engineered Vascular Grafts

Translation of small-diameter tissue-engineered vascular grafts (TEVGs) for the treatment of coronary artery disease (CAD) remains an unfulfilled promise. This is largely due to the limited integration of TEVGs into the native vascular wall-a process hampered by the insufficient smooth muscle cell (SMC) infiltration and extracellular matrix deposition, and low vasoactivity. These processes can be promoted through the judicious modulation of the SMC toward a synthetic phenotype to promote remodeling and vascular integration; however, the expression of synthetic markers is often accompanied by a decrease in the expression of contractile proteins. Therefore, techniques that can precisely modulate the SMC phenotypical behavior could have the potential to advance the translation of TEVGs. In this review, we describe the phenotypic diversity of SMCs and the different environmental cues that allow the modulation of SMC gene expression. Furthermore, we describe the emerging biomaterial approaches to modulate the SMC phenotype in TEVG design and discuss the limitations of current techniques. In addition, we found that current studies in tissue engineering limit the analysis of the SMC phenotype to a few markers, which are often the characteristic of early differentiation only. This limited scope has reduced the potential of tissue engineering to modulate the SMC toward specific behaviors and applications. Therefore, we recommend using the techniques presented in this review, in addition to modern single-cell proteomics analysis techniques to comprehensively characterize the phenotypic modulation of SMCs. Expanding the holistic potential of SMC modulation presents a great opportunity to advance the translation of living conduits for CAD therapeutics.

Evaluation of vascular repair by tissue-engineered human acellular vessels or expanded polytetrafluoroethylene grafts in a porcine model of limb ischemia and reperfusion

BACKGROUND

This study evaluated performance of a tissue-engineered human acellular vessel (HAV) in a porcine model of acute vascular injury and ischemia. The HAV is an engineered blood vessel consisted of human vascular extracellular matrix proteins. Limb reperfusion and vascular outcomes of the HAV were compared with those from synthetic expanded polytetrafluoroethylene (ePTFE) grafts.

METHODS

Thirty-six pigs were randomly assigned to four treatment groups, receiving either the HAV or a PTFE graft following a hind limb ischemia period of either 0 or 6 hours. All grafts were 3-cm-long interposition 6-mm diameter grafts implanted within the right iliac artery. Animals were not immunosuppressed and followed for up to 28 days after surgery. Assessments performed preoperatively and postoperatively included evaluation of graft patency, hind limb function, and biochemical markers of tissue ischemia or reperfusion injury. Histological analysis was performed on explants to assess host cell responses.

RESULTS

Postoperative gait assessment and biochemical analysis confirmed that ischemia and reperfusion injury were caused by 6-hour ischemia, regardless of vascular graft type. Hind limb function and tissue damage biomarkers improved in all groups postoperatively. Final patency rates at postoperative day 28 were higher for HAV than for ePTFE graft in both the 0-hour (HAV, 85.7%; ePTFE, 66.7%) and 6-hour (HAV, 100%; ePTFE, 75%) ischemia groups, but these differences were not statistically significant. Histological analyses identified some intimal hyperplasia and host reactivity to the xenogeneic HAV and also to the synthetic ePTFE graft. Positive host integration and vascular cell infiltration were identified in HAV but not ePTFE explants.

CONCLUSION

Based on the functional performance and the histologic profile of explanted HAVs, this study supports further investigation to evaluate long-term performance of the HAV when used to repair traumatic vascular injuries.

Biological mechanisms of infection resistance in tissue engineered blood vessels compared to synthetic expanded polytetrafluoroethylene grafts

Objective

Synthetic expanded polytetrafluoroethylene (ePTFE) grafts are known to be susceptible to bacterial infection. Results from preclinical and clinical studies of bioengineered human acellular vessels (HAVs) have shown relatively low rates of infection. This study evaluates the interactions of human neutrophils and bacteria with ePTFE and HAV vascular conduits to determine whether there is a correlation between neutrophil-conduit interactions and observed differences of their infectivity in vivo.

Methods

A phase III comparative clinical study between investigational HAVs (n = 177) and commercial ePTFE grafts (n = 178) used for hemodialysis access (ClinicalTrials.gov Identifier: NCT02644941) was evaluated for conduit infection rates followed by histological analyses of HAV and ePTFE tissue explants. The clinical histopathology of HAV and ePTFE conduits reported to be infected was compared with immunohistochemistry of explanted materials from a preclinical model of bacterial contamination. Mechanistic in vitro studies were then conducted using isolated human neutrophils seeded directly onto HAV and ePTFE materials to analyze neutrophil viability, morphology, and function.

Results

Clinical trial results showed that the HAV had a significantly lower (0.93%; P = .0413) infection rate than that of ePTFE (4.54%). Histological analysis of sections from infected grafts explanted approximately 1 year after implantation revealed gram-positive bacteria near cannulation sites. Immunohistochemistry of HAV and ePTFE implanted in a well-controlled rodent infection model suggested that the ePTFE matrix permitted bacterial infiltration and colonization but may be inaccessible to neutrophils. In the same model, the HAV showed host recellularization and lacked detectable bacteria at the 2-week explant. In vitro results demonstrated that the viability of human neutrophils decreased significantly upon exposure to ePTFE, which was associated with neutrophil elastase release in the absence of bacteria. In contrast, neutrophils exposed to the HAV material retained high viability and native morphology. Cocultures of neutrophils and Staphylococcus aureus on the conduit materials demonstrated that neutrophils were more effective at ensnaring and degrading bacteria on the HAV than on ePTFE.

Conclusions

The HAV material seems to demonstrate a resistance to bacterial infection. This infection resistance is likely due to the HAV's native-like material composition, which may be more biocompatible with host neutrophils than synthetic vascular graft material.

Combining Cell Technologies With Biomimetic Tissue Engineering Applications: A New Paradigm for Translational Cardiovascular Therapies

Cardiovascular disease is a major cause of morbidity and mortality worldwide and, to date, the clinically available prostheses still present several limitations. The design of next-generation regenerative replacements either based on cellular or extracellular matrix technologies can address these shortcomings. Therefore, tissue engineered constructs could potentially become a promising alterative to the current therapeutic options for patients with cardiovascular diseases. In this review, we selectively present an overview of the current tissue engineering tools such as induced pluripotent stem cells, biomimetic materials, computational modeling, and additive manufacturing technologies, with a focus on their application to translational cardiovascular therapies. We discuss how these advanced technologies can help the development of biomimetic tissue engineered constructs and we finally summarize the latest clinical evidence for their use, and their potential therapeutic outcome.

Vascular Grafts: Technology Success/Technology Failure

Vascular prostheses (grafts) are widely used for hemodialysis blood access, trauma repair, aneurism repair, and cardiovascular reconstruction. However, smaller-diameter (≤4 mm) grafts that would be valuable for many reconstructions have not been achieved to date, although hundreds of papers on small-diameter vascular grafts have been published. This perspective article presents a hypothesis that may open new research avenues for the development of small-diameter vascular grafts. A historical review of the vascular graft literature and specific types of vascular grafts is presented focusing on observations important to the hypothesis to be presented. Considerations in critically reviewing the vascular graft literature are discussed. The hypothesis that perhaps the "biocompatible biomaterials" comprising our vascular grafts-biomaterials that generate dense, nonvascularized collagenous capsules upon implantation-may not be all that biocompatible is presented. Examples of materials that heal with tissue reconstruction and vascularity, in contrast to the fibrotic encapsulation, are offered. Such prohealing materials may lead the way to a new generation of vascular grafts suitable for small-diameter reconstructions.

Strategies to counteract adverse remodeling of vascular graft: A 3D view of current graft innovations

Vascular grafts are widely used for vascular surgeries, to bypass a diseased artery or function as a vascular access for hemodialysis. Bioengineered or tissue-engineered vascular grafts have long been envisioned to take the place of bioinert synthetic grafts and even vein grafts under certain clinical circumstances. However, host responses to a graft device induce adverse remodeling, to varied degrees depending on the graft property and host's developmental and health conditions. This in turn leads to invention or failure. Herein, we have mapped out the relationship between the design constraints and outcomes for vascular grafts, by analyzing impairment factors involved in the adverse graft remodeling. Strategies to tackle these impairment factors and counteract adverse healing are then summarized by outlining the research landscape of graft innovations in three dimensions-cell technology, scaffold technology and graft translation. Such a comprehensive view of cell and scaffold technological innovations in the translational context may benefit the future advancements in vascular grafts. From this perspective, we conclude the review with recommendations for future design endeavors.

The evolving panorama of vascular access in the 21st century

There are three major types of hemodialysis vascular access: hemodialysis catheters, arteriovenous grafts, and arteriovenous fistulas. Arteriovenous fistulas provide the best access due to their reliability and long-term patency. They are recommended by the current Kidney Disease Outcomes Quality Initiatives (K-DOQI) guidelines; however, not all patients benefit from arteriovenous fistulas due to poor maturation or a lack of adequate vasculature. Currently, hemodialysis is initiated via catheters in the majority of patients. Catheters are associated with high morbidity and mortality due to infection, lower quality of dialysis, and the development of central vein stenosis. The varied responses of patients to the different access types exemplify the need to choose the "right access for the right patient" based on scores that can predict death risk and progression of chronic kidney disease. Additionally, vascular access, often referred to as the "Achilles' heel" of hemodialysis patients, represents a significant percentage of the Medicare budget that continues to increase yearly. The purpose of this paper is to review the current literature on the management of vascular access complications and infection treatment and prevention. The paper also explores emerging research regarding the devices and methods to improve access outcomes such as early cannulation arteriovenous grafts, endovascular arteriovenous fistula creation, and regenerative grafts with resorbable scaffolds, among others. The data were collected through literature searches via PubMed, Athens and web search engines.

Hypoxia facilitates proliferation of smooth muscle cells derived from pluripotent stem cells for vascular tissue engineering

Tissue-engineered blood vessels (TEBVs) show significant therapeutic potential for replacing diseased blood vessels. Vascular smooth muscle cells (VSMCs) derived from human induced pluripotent stem cells (hiPSCs) via embryoid body (EB)-based differentiation, are promising seed cells to construct TEBVs. However, obtaining sufficient high-quality hiPSC-VSMCs remains challenging. Stem cells are located in a niche characterized by hypoxia. Hence, we explored molecular and cellular functions at different induction stages from the EB formation commencement to the end of directed differentiation under normoxic and hypoxic conditions, respectively. Hypoxia enhanced the formation, adhesion and amplification rates of EBs. During directed differentiation, hiPSC-VSMCs exhibited increased cell viability under hypoxic conditions. Moreover, seeding hypoxia-pretreated cells on biodegradable scaffolds, facilitated collagen I and elastin secretion, which has significant application value for TEBV development. Hence, we proposed that hypoxic treatment during differentiation effectively induces proliferative hiPSC-VSMCs, expanding high-quality seed cell sources for TEBV construction.