Biocompatible carbon-based screen-printed electrodes for the electrochemical detection of nitric oxide

Nano-engineered screen-printed electrodes: A dynamic tool for detection of viruses

There is a growing interest in the development of portable, cost-effective, and easy-to-use biosensors for the rapid detection of diseases caused by infectious viruses: COVID-19 pandemic has highlighted the central role of diagnostics in response to global outbreaks. Among all the existing technologies, screen-printed electrodes (SPEs) represent a valuable technology for the detection of various viral pathogens. During the last five years, various nanomaterials have been utilized to modify SPEs to achieve convincing effects on the analytical performances of portable SPE-based diagnostics. Herein we would like to provide the readers a comprehensive investigation about the recent combination of SPEs and various nanomaterials for detecting viral pathogens. Manufacturing methods and features advances are critically discussed in the context of early-stage detection of diseases caused by HIV-1, HBV, HCV, Zika, Dengue, and Sars-CoV-2. A detailed table is reported to easily guide readers toward the "right" choice depending on the virus of interest.

Screen-Printed Soft-Nitrided Carbon Electrodes for Detection of Hydrogen Peroxide

Nitrogen-doped carbon materials have garnered much interest due to their electrocatalytic activity towards important reactions such as the reduction of hydrogen peroxide. N-doped carbon materials are typically prepared and deposited on solid conductive supports, which can sometimes involve time-consuming, complex, and/or costly procedures. Here, nitrogen-doped screen-printed carbon electrodes (N-SPCEs) were fabricated directly from a lab-formulated ink composed of graphite that was modified with surface nitrogen groups by a simple soft nitriding technique. N-SPCEs prepared from inexpensive starting materials (graphite powder and urea) demonstrated good electrocatalytic activity towards hydrogen peroxide reduction. Amperometric detection of H₂O₂ using N-SPCEs with an applied potential of −0.4 V (vs. Ag/AgCl) exhibited good reproducibility and stability as well as a reasonable limit of detection (2.5 µM) and wide linear range (0.020 to 5.3 mM).

A Comprehensive Review: Development of Electrochemical Biosensors for Detection of Cyanotoxins in Freshwater

Cyanobacteria harmful algal blooms are increasing in frequency and cyanotoxins have become an environmental and public concern in the U.S. and worldwide. In this Review, the majority of reported studies and developments of electrochemical affinity biosensors for cyanotoxins are critically reviewed and discussed. Essential background information about cyanobacterial toxins and electrochemical biosensors is combined with the rapidly moving development of electrochemical biosensors for these toxins. Current issues and future challenges for the development of useful electrochemical biosensors for cyanotoxin detection that meet the demands for applications in field freshwater samples are discussed. The major aspects of the entire review article in a prescribed sequence include (i) the state-of-the-art knowledge of the toxicity of cyanotoxins, (ii) important harmful algal bloom events, (iii) advisories, guidelines, and regulations, (iv) conventional analytical methods for determination of cyanotoxins, (v) electrochemical transduction, (vi) recognition receptors, (vii) reported electrochemical biosensors for cyanotoxins, (viii) summary of analytical performance, and (ix) recent advances and future trends. Discussion includes electrochemical techniques and devices, biomolecules with high affinity, numerous array designs, various detection approaches, and research strategies in tailoring the properties of the transducer-biomolecule interface. Scientific and engineering aspects are presented in depth. This review aims to serve as a valuable source to scientists and engineers entering the interdisciplinary field of electrochemical biosensors for detection of cyanotoxins in freshwaters.

Percolation behaviors of model carbon black pastes

The percolation behaviors of a series of high-structured carbon black (CB) pastes (CB weight fractions 10-25 wt%, ethyl cellulose as the binder, α-terpineol as the solvent) were systematically investigated using analyses of rheology and impedance spectra together with characterization via small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM). When the CB concentration was near the static percolation threshold (∼20 wt%), the permittivity, ac conductance, and elastic modulus of the paste displayed notable increases, whereas the SAXS profile revealed the prevalence of isolated CB aggregates (mean radius of gyration ∼40 nm). Upon further aging at 25 and 40 °C (up to 6 h), two CB pastes near the static percolation threshold (i.e., 20 and 25 wt%) exhibited prominent temporally evolving responses, including more than tenfold increases in their ac conductance and elastic modulus, as well as a pronounced upturn in the low-q SAXS profile (q < 0.03 nm-1) and the formation of a (partially) interconnected cluster network in SEM observations of the morphologies of screen-printed films. In this case, we provide the first evidence of "(aging) Time-(relaxation) Time-Temperature-Concentration Superposition (TTTCS)" for the dynamic modulus data over a frequency range of seven orders of magnitude. This suggests that prolonged aging time imparted to CB aggregate interaction and restructuring (or gelation) may work in tandem with the known effects of the system temperature and concentration to further extend the accessible range of dynamic modulus data, in a similar way to recent reports on the effect of the curing (crosslinking) time on a carbon nanotube suspension and caramel. In combination with existing (three) master curves for two different colloidal materials, we show that there is a reasonable superposition of all the dynamic modulus data over a frequency range of 12 orders of magnitude.

Simulating the phase II metabolism of raloxifene on a screen-printed electrode

Raloxifene (RLX) is a selective estrogen receptor modulator widely used for the treatment of osteoporosis in post-menopause women. Toxicological in vitro studies suggested the reactivity of RLX through phase I metabolism. Herein, we describe a simple and inexpensive method for monitoring the reactive metabolism and detoxification of RLX by electrochemistry (EC) and mass spectrometry (MS). The phase I metabolite was synthesized electrochemically on a screen-printed electrode (SPE) and subsequently reacted with glutathione (GSH). The resulted GSH-adducts and GSH disulfides were characterized off-line by electrospray ionization (ESI)–MS.

Effect of ordered mesoporous carbon contact layer on the sensing performance of sputtered RuO2 thin film pH sensor

The effect of contact layer on the pH sensing performance of a sputtered RuO₂ thin film pH sensor is investigated. The response of pH sensors employing RuO₂ thin film electrodes on screen-printed Pt, carbon and ordered mesoporous carbon (OMC) contact layers are measured over a pH range from 4 to 10. Working electrodes with OMC contact layer are found to have Nernstian pH sensitivity (-58.4mV/pH), low short-term drift rate (5.0mV/h), low hysteresis values (1.13mV) and fast reaction times (30s), after only 1h of conditioning. A pH sensor constructed with OMC carbon contact layer displays improved sensing performance compared to Pt and carbon-based counterparts, making this electrode more attractive for applications requiring highly-accurate pH sensing with reduced conditioning time.

A Disposable Microfluidic Device with a Screen Printed Electrode for Mimicking Phase II Metabolism

Human metabolism is investigated using several in vitro methods. However, the current methodologies are often expensive, tedious and complicated. Over the last decade, the combination of electrochemistry (EC) with mass spectrometry (MS) has a simpler and a cheaper alternative to mimic the human metabolism. This paper describes the development of a disposable microfluidic device with a screen-printed electrode (SPE) for monitoring phase II GSH reactions. The proposed chip has the potential to be used as a primary screening tool, thus complementing the current in vitro methods.

Polyelectrolyte multilayer film modification for chemo-mechano-regulation of endothelial cell response

The new multilayer polyelectrolyte films (PEMs) that are able to simulate the structure and functions of the extracellular matrix have become a powerful tool for tailoring biointerfaces of “cardiovascular” implants.

Effect of the silicon carbide nanoparticles introduction on biological properties of porous polymer coatings

The multilayer polyelectrolyte films (PEMs) seem to be a promising material to reconstruct the structure and behavior of the extracellular matrix.

Cytotoxicity control of SiC nanoparticles introduced into polyelectrolyte multilayer films

Nowadays, biosensor technology development is directed toward improvement of sensing devices' biocompatibility.

Electrochemical nitric oxide sensors for physiological measurements

The important biological roles of nitric oxide (NO) have prompted the development of analytical techniques capable of sensitive and selective detection of NO. Electrochemical sensing, more than any other NO detection method, embodies the parameters necessary for quantifying NO in challenging physiological environments such as blood and the brain. In this tutorial review, we provide a broad overview of the field of electrochemical NO sensors, including design, fabrication, and analytical performance characteristics. Both electrochemical sensors and biological applications are detailed.

Microelectrode arrays for electrochemistry: approaches to fabrication

Microelectrode arrays have unique electrochemical properties such as small capacitive-charging currents, reduced iR drop, and steady-state diffusion currents. These properties enable the use of microelectrode arrays and have captured much interest in the field of electrochemistry. Techniques for the fabrication of such arrays are reviewed. The relative features and merits of different techniques are also discussed.

Design and development of a highly stable hydrogen peroxide biosensor on screen printed carbon electrode based on horseradish peroxidase bound with gold nanoparticles in the matrix of chitosan

The design and development of a screen printed carbon electrode (SPCE) on a polyvinyl chloride substrate as a disposable sensor is described. Six configurations were designed on silk screen frames. The SPCEs were printed with four inks: silver ink as the conducting track, carbon ink as the working and counter electrodes, silver/silver chloride ink as the reference electrode and insulating ink as the insulator layer. Selection of the best configuration was done by comparing slopes from the calibration plots generated by the cyclic voltammograms at 10, 20 and 30 mM K(3)Fe(CN)(6) for each configuration. The electrodes with similar configurations gave similar slopes. The 5th configuration was the best electrode that gave the highest slope. Modifying the best SPCE configuration for use as a biosensor, horseradish peroxidase (HRP) was selected as a biomaterial bound with gold nanoparticles (AuNP) in the matrix of chitosan (HRP/AuNP/CHIT). Biosensors of HRP/SPCE, HRP/CHIT/SPCE and HRP/AuNP/CHIT/SPCE were used in the amperometric detection of H(2)O(2) in a solution of 0.1M citrate buffer, pH 6.5, by applying a potential of -0.4V at the working electrode. All the biosensors showed an immediate response to H(2)O(2). The effect of HRP/AuNP incorporated with CHIT (HRP/AuNP/CHIT/SPCE) yielded the highest performance. The amperometric response of HRP/AuNP/CHIT/SPCE retained over 95% of the initial current of the 1st day up to 30 days of storage at 4 degrees C. The biosensor showed a linear range of 0.01-11.3mM H(2)O(2), with a detection limit of 0.65 microM H(2)O(2) (S/N=3). The low detection limit, long storage life and wide linear range of this biosensor make it advantageous in many applications, including bioreactors and biosensors.