Label free electrochemiluminescence protocol for sensitive DNA detection with a tris(2,2′-bipyridyl)ruthenium(II) modified electrode based on nucleic acid oxidation

Signal-on electrogenerated chemiluminescence detection of gonyautoxin 1/4 based on proximity ligation-induced an electrode-bound pseudoknot DNA

A "signal on" electrogenerated chemiluminescence (electrochemiluminescence, ECL) aptasensor based on proximity ligation-induced an electrode-bound pseudoknot DNA for sensitive detection of gonyautoxin 1/4 (GTX1/4) was developed on basis of the competitive type reaction mode. Aptamer was adopted as recognition element. Ru(bpy)32+ as ECL signal, was attached on the glassy carbon electrode (GCE) surface modified with nafion and gold nanoparticles (AuNPs) by electrostatic attraction to obtain the ECL platform. The pseudoknot DNA as capture probe, was immobilized onto the ECL platform via Au-S bond to obtain the ECL aptasensor. In the absence of GTX1/4, Y-shape proximate cooperative complex among aptamer, pseudoknot DNA and DNA1 was formed, drawing the ferrocene groups Fc, as ECL quencher) of both pseudoknot DNA and DNA1 near the electrode surface and resulting in low ECL signal. In the presence of GTX1/4, GTX1/4 competed with pseudoknot DNA and DNA1 for aptamer in homogeneous solution, preventing the formation of proximate cooperative complex and keeping the capture DNA in the pseudoknot conformation with Fc groups far away from the electrode surface, generating a high ECL signal. The recovery of ECL intensity increased with the GTX1/4 concentration and allowed the detection of GTX1/4 in the range of 0.01 ng/mL to 10 ng/mL with a detection of limit as low as 6.56 pg/mL. Additionally, the accuracy of this method was validated for analysis of spiked sea water samples with good recoveries, which indicates great potential in commercial application.

Tris(2,2'-bipyridyl)ruthenium (II) complex as a universal reagent for the fabrication of heterogeneous electrochemiluminescence platforms and its recent analytical applications

In recent years, electrochemiluminescence (ECL) has received enormous attention and has emerged as one of the most successful tools in the field of analytical science. Compared with homogeneous ECL, the heterogeneous (or solid-state) ECL has enhanced the rate of the electron transfer kinetics and offers rapid response time, which is highly beneficial in point-of-care and clinical applications. In ECL, the luminophore is the key element, which dictates the overall performance of the ECL-based sensors in various analytical applications. Tris(2,2'-bipyridyl)ruthenium (II) complex, Ru(bpy)32+, is a coordination compound, which is the gold-standard luminophore in ECL. It has played a key role in translating ECL from a "laboratory curiosity" to a commercial analytical instrument for diagnosis. The aim of the present review is to provide the principles of ECL and classical reaction mechanisms-particularly involving the heterogeneous Ru(bpy)32+/co-reactant ECL systems, as well as the fabrication methods and its importance over solution-phase Ru(bpy)32+ ECL. Then, we discussed the emerging technology in solid-state Ru(bpy)32+ ECL-sensing platforms and their recent potential analytical applications such as in immunoassay sensors, DNA sensors, aptasensors, bio-imaging, latent fingerprint detection, point-of-care testing, and detection of non-biomolecules. Finally, we also briefly cover the recent advances in solid-state Ru(bpy)32+ ECL coupled with the hyphenated techniques.

Sensitive biosensor for p53 DNA sequence based on the photothermal effect of gold nanoparticles and the signal amplification of locked nucleic acid functionalized DNA walkers using a thermometer as readout

A convenient photothermal biosensor was constructed for p53 DNA sequence detection based on the high discrimination capability of locked nucleic acid and high efficiency of signal amplification strategy of DNA walkers and difference photothermal effect between aggregated and dispersed gold nanoparticles (AuNPs). The presence of target activated the DNA walkers via the high affinity between target and complementary locked nucleic acid in the probe strand, resulting in the hybridization of the walker strand and substrate strand to form a specific enzyme recognition site. Under the cleavage of the endonuclease, single-stranded DNA (ssDNA) was released to the solution. Then the walker strand bound to a new substrate strand, and the next round of cleavage was triggered. The released ssDNA enhanced the stability of AuNPs against salt-induced aggregation. Given difference photothermal effects of the aggregated AuNPs and dispersed AuNPs under the near-infrared laser, the change of the temperature was detected by a common thermometer easily, which had a linear relationship with the target concentration in the range of 2.0-120.0 pM, the detection limit was 1.4 pM (S/N = 3). The proposed photothermal assay has been applied to detect p53 DNA sequence spiked complex samples with satisfying results.

Polymorph-Dependent Electrogenerated Chemiluminescence of Low-Dimensional Organic Semiconductor Structures for Sensing

A sensitive electrogenerated chemiluminescence (ECL) sensor with an organic semiconductor as active material for detecting trace amounts of molecules has been highly desired. However, the crystal structure responses of the ECL properties of the organic semiconductor materials, that is, structure-property relationship, is not clear, which limits the development of the sensitive ECL sensors. Herein, for the first time, we reported a novel concept for molecular-stacking-arrangement-dependent electrogenerated chemiluminescence properties of organic semiconductor rubrene microstructures. The rubrene 1D microwires and 2D hexagonal plates with different polymorphs (triclinic and monoclinic) were controllably constructed with the reprecipitation method. The supersaturation of the rubrene molecules plays an important role in the thermodynamically and kinetically dominated process of growth, which affects not only the polymorphs but also the morphology of the obtained microstructures. These microstructures show good optoelectronic properties, which are used as active ECL materials for the construction of ECL sensors. The ECL sensors exhibited distinct electrogenerated chemiluminescence properties, probably related to different inherent crystal-structure-dependent triplet-triplet annihilation rate and charge-transfer rate. The sensors manifested electrogenerated chemiluminescence responses in broad linear range for the monitoring of creatinine molecules.

An ultrasensitive multi-walled carbon nanotube–platinum–luminol nanocomposite-based electrochemiluminescence immunosensor

An ultrasensitive electrochemiluminescence (ECL) immunosensor for carbohydrate antigen 19-9 (CA19-9) detection using multi-walled carbon nanotube–platinum–luminol nanocomposites (MWCNT–Pt–luminol) as nanointerface and signal tags was designed.

An electrochemiluminescence-supramolecular approach to sarcosine detection for early diagnosis of prostate cancer

Monitoring Prostate Cancer (PCa) biomarkers is an efficient way to diagnosis this disease early, since it improves the therapeutic success rate and suppresses PCa patient mortality: for this reason a powerful analytical technique such as electrochemiluminescence (ECL) is already used for this application, but its widespread usability is still hampered by the high cost of commercial ECL equipment. We describe an innovative approach for the selective and sensitive detection of the PCa biomarker sarcosine, obtained by a synergistic ECL-supramolecular approach, in which the free base form of sarcosine acts as co-reagent in a Ru(bpy)3(2+)-ECL process. We used magnetic micro-beads decorated with a supramolecular tetraphosphonate cavitand (Tiiii) for the selective capture of sarcosine hydrochloride in a complex matrix like urine. Sarcosine determination was then obtained with ECL measurements thanks to the complexation properties of Tiiii, with a protocol involving simple pH changes - to drive the capture-release process of sarcosine from the receptor - and magnetic micro-bead technology. With this approach we were able to measure sarcosine in the μM to mM window, a concentration range that encompasses the diagnostic urinary value of sarcosine in healthy subjects and PCa patients, respectively. These results indicate how this ECL-supramolecular approach is extremely promising for the detection of sarcosine and for PCa diagnosis and monitoring, and for the development of portable and more affordable devices.

Luminescent ruthenium polypyridyl complexes with extended ‘dppz’ like ligands as DNA targeting binders and cellular agents

DNA-binding and phototoxicity of Ru(ii) complexes with ligands derived from pyrazinodipyridophenazine and either phen or TAP as ancillary ligands are reported.

Ruthenium polypyridine complexes combined with oligonucleotides for bioanalysis: a review

Ruthenium complexes are among the most interesting coordination complexes and they have attracted great attention over the past decades due to their appealing biological, catalytic, electronic and optical properties. Ruthenium complexes have found a unique niche in bioanalysis, as demonstrated by the substantial progress made in the field. In this review, the applications of ruthenium complexes coordinated with polypyridine ligands (and analogues) in bioanalysis are discussed. Three main detection methods based on electrochemistry, electrochemiluminescence, and photoluminscence are covered. The important targets, including DNA and other biologically important targets, are detected by specific biorecognition with the corresponding oligonucleotides as the biorecognition elements (i.e., DNA is probed by its complementary strand and other targets are detected by functional nucleic acids, respectively). Selected examples are provided and thoroughly discussed to highlight the substantial progress made so far. Finally, a brief summary with perspectives is included.

Protein-directed approaches to functional nanomaterials: a case study of lysozyme

Using lysozyme as a model, protein-directed approaches to functional nanomaterials were reviewed, making rational materials design possible in the future.

Applications of tris(2,2'-bipyridyl)ruthenium(II) in electrochemiluminescence

Electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] has received considerable interest over broad applications due to its remarkably high sensitivity and extremely wide dynamic range. After a brief introduction of the ECL of Ru(bpy)(3)(2+), an overview of our recent research on enhanced ECL, fabrication of solid-state ECL sensors, analytical application of an effective bioassay, and alignment of ECL with capillary electrophoresis (CE) and microchip CE is discussed in detail. Finally, we conclude with a look at the future challenges and prospects of the development of ECL.

Electrochemiluminescence of tris(2,2'-bipyridyl)ruthenium and its applications in bioanalysis: a review

Electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3) (2+)] is an active research area and includes the synthesis of ECL-active materials, mechanistic studies and broad applications. Extensive research has been focused on this area, due to its scientific and practical importance. In this mini-review we focus on the bio-related applications of ECL. After a brief introduction to Ru(bpy)(3) (2+) ECL and its mechanisms, its application in constructing an effective bioassay is discussed in detail. Three types of ECL assay are covered: DNA, immunoassay and functional nucleic acid sensors. Finally, future directions for these assays are discussed.

A signal-on electrochemiluminescence aptamer biosensor for the detection of ultratrace thrombin based on junction-probe

A novel signal-on junction-probe electrogenerated chemiluminescence (ECL) aptamer biosensor has been developed for the detection of ultratrace thrombin based on a structure-switching ECL-quenching mechanism. The ECL aptamer biosensor comprises two main parts: an ECL substrate and an ECL intensity switch. The ECL substrate was made by modifying the complex of Au nanoparticle and ruthenium (II) tris-bipyridine (Ru(bpy)(3)(2+)-AuNPs) on the surface of gold electrode (GE), and the ECL intensity switch contains three probes designed according to the "junction-probe" strategy. The first probe is capture probe (Cp) which was functionalized with a thiol group at one end and covalently attached to Ru(bpy)(3)(2+)-AuNPs modified GE through S-Au bonding. The second probe is aptamer probe (Ap), which containing 15-base anti-thrombin DNA aptamer. The third one is ferrocene-labeled probe (Fp), which was functionalized with ferrocene tag at one end. We demonstrated that, in the absence of thrombin, Cp, Ap and Fp will hybridize to form a ternary "Y" junction structure and resulted in a quenching of ECL of Ru(bpy)(3)(2+). Whereas, in the presence of thrombin, the Ap prefers to form the G-quadruplex aptamer-thrombin complex and lead to an obvious recovery of ECL of Ru(bpy)(3)(2+), which provided a sensing platform for the detection of thrombin. Using this reusable sensing platform, a simple, rapid and selective signal-on ECL aptamer biosensor for the detection of thrombin with a detection limit of 8.0×10(-15) M has been developed. The success in the present biosensor served as a significant step towards the development of monitoring ultratrace thrombin in clinical detection.

Electrochemiluminescent aptamer biosensor for the determination of ochratoxin A at a gold-nanoparticles-modified gold electrode using N-(aminobutyl)-N-ethylisoluminol as a luminescent label

A highly selective electrochemiluminescent biosensor for the detection of target nephrotoxic toxin, ochratoxin A (OTA), was developed using a DNA aptamer as the recognition element and N-(4-aminobutyl)-N-ethylisoluminol (ABEI) as the signal-producing compound. The electrochemiluminescent aptamer biosensor was fabricated by immobilizing aptamer complementary DNA 1 sequence onto the surface of a gold-nanoparticle (AuNP)-modified gold electrode. ABEI-labeled aptamer DNA 2 sequence hybridized to DNA 1 and was utilized as an electrochemiluminescent probe. A decreased electrochemiluminescence (ECL) signal was generated upon aptamer recognition of the target OTA, which induced the dissociation of DNA 2 (ABEI-labeled aptamer electrochemiluminescent probe) from DNA 1 and moved it far away from the electrode surface. Under the optimal conditions, the decreased ECL intensity was proportional to an OTA concentration ranging from 0.02 to 3.0 ng mL(-1), with a detection limit of 0.007 ng mL(-1). The relative standard deviation was 3.8% at 0.2 ng mL(-1) (n = 7). The proposed method has been applied to measure OTA in naturally contaminated wheat samples and validated by an official method. This work demonstrates the combination of a highly binding aptamer with a highly sensitive ECL technique to design an electrochemiluminescent biosensor, which is a very promising approach for the determination of small-molecule toxins.

Scrutiny on significant factors of hemin catalyzed Ag nanoparticle as biosensor for RNA

A responsive electrical detection technique of nucleic acids has been demonstrated on submicrogapped biosensor. This method contain immobilizing of Peptide Nucleic Acid (PNA) probes in the gap areas of a pair of interdigited microelectrodes and subsequently hybridizing with their complementary target RNA. After hybridization, hemin molecules were introduced into the RNA strand via zirconium-phosphate and zirconium-carbonate chemistries. The newly attached hemin molecules act as a catalyst to accelerate reducing ammoniacal Ag ion to form Ag nanoparticles, which span the gap of the interdigitated microelectrode. The conductance of the Ag nanoparticles directly correlated with the number of the hybridized RNA molecules. Nearly 1 fM sensitivity was achieved under optimal conditions.

A solid-state electrochemiluminescence biosensing switch for detection of thrombin based on ferrocene-labeled molecular beacon aptamer

A solid-state electrochemiluminescence (ECL) biosensing switch system based on special ferrocene-labeled molecular beacon aptamer (Fc-MBA) has been developed successfully for thrombin detections. Such special switch system includes two main parts, an ECL substrate and an ECL intensity switch. The ECL substrate was made by modifying the complex of Au nanoparticle and Ruthenium (II) tris-(bipyridine) (Ru(bpy)(3)(2+)-AuNPs) onto Au electrode. A molecular beacon aptamer labeled by ferrocene acted as the ECL intensity switch. The loop bases of the ECL intensity switch are designed with special anti-thrombin aptamer sequence which could be combined with its target protein via the reaction between aptamer and thrombin. During the reactions, the molecular beacon aptamer opened its stem-loop, and the labeled Fc was consequently kept away from the ECL substrate. Such structural change resulted in an obvious ECL intensity increment due to the decreased quenching effect of Fc to the ECL substrate. The analytic results are sensitive and specific.

Nanostructured materials for electrochemiluminescence (ECL)-based detection methods: recent advances and future perspectives

This review presents a general picture of the last advances and developments (2003-2008) related to novel nanostructured materials for electrochemiluminescence-based biosensors using. It briefly covers the basic mechanisms of ECL detection, and the recent developments in fabrication of solid-state ECL sensors using nanostructured materials such as carbon nanotubes, metal nanoparticles, quantum dots, thin films of metallopolymers and of inorganic metal complexes. Finally, challenges and perspectives of the use of such materials for biomedical diagnostics are discussed.

Applications of nanomaterials in electrogenerated chemiluminescence biosensors

Electrogenerated chemiluminescence (also called electrochemiluminescence and abbreviated ECL) involves the generation of species at electrode surfaces that then undergo electron-transfer reactions to form excited states that emit light. ECL biosensor, combining advantages offered by the selectivity of the biological recognition elements and the sensitivity of ECL technique, is a powerful device for ultrasensitive biomolecule detection and quantification. Nanomaterials are of considerable interest in the biosensor field owing to their unique physical and chemical properties, which have led to novel biosensors that have exhibited high sensitivity and stability. Nanomaterials including nanoparticles and nanotubes, prepared from metals, semiconductor, carbon or polymeric species, have been widely investigated for their ability to enhance the efficiencies of ECL biosensors, such as taking as modification electrode materials, or as carrier of ECL labels and ECL-emitting species. Particularly useful application of nanomaterials in ECL biosensors with emphasis on the years 2004-2008 is reviewed. Remarks on application of nanomaterials in ECL biosensors are also surveyed.