Potato starch as a highly enantioselective system for temperature-dependent electrochemical recognition of tryptophan isomers

Chiral MOFs encapsulated by polymers with poly-metallic coordination as chiral biosensors

Chiral materials have drawn the widespread attention for their its chiral recognition ability. The design and synthesis of chiral material are of importance owing to the unpredictability in controlling chirality during the synthesis process. To circumvent problems, a chiral MOF (D-His-ZIF-8) was synthesized by ligand exchange of 2-methylimidazole (Hmim) on ZIF-8 by D-histidine (D-His), which can be treated as chiral host to distinguish amino acid enantiomers. The obtained D-His-ZIF-8 can provide chiral nanochannels for amino acid guests. Meanwhile, polynary transition-metal ion (Co²⁺ and Fe³⁺) coordinating with polydopamine (PDA) wrapped on the surface of D-His-ZIF-8 can increase the active sites. The electrochemical chiral recognition behavior showed that D-His-ZIF-8@CoFe-PDA exhibited good recognition of the tryptophan enantiomer (L/D-Trp) (working potential of -0.2 V vs. Hg/HgCl₂). The LOD and LOQ of L-Trp were 0.066 mM and 0.22 mM, respectively, while the LOD and LOQ of D-Trp were 0.15 mM and 0.50 mM, respectively. Finally, the usefulness of D-His-ZIF-8@CoFe-PDA/GCE was evaluated with a recovery of 94.4-103%. The analysis of real  samples shows that D-His-ZIF-8@CoFe-PDA/GCE is a feasible sensing platform for the detection of L-Trp and D-Trp.

A renewable electrochemical sensor based on a self-assembled framework of chiral molecules for efficient identification of tryptophan isomers

Molecular self-assembly provides a reasonably effective strategy for the design and construction of chiral sensors. Here, Cu²⁺ was connected to β-cyclodextrin (β-CD) through coordination to synthesize Cu₂-β-CD, subsequently assembled with ammoniated chitosan-MWCNTs (NH₂-CS-MWCNTs) by the effect of coordination driver to form a chiral sensing interface Cu₂-β-CD/NH₂-CS-MWCNTs. Using the electrochemical method, the valid recognition of tryptophan (Trp) isomers was achieved on the self-assembly interface. Under the optimal experimental conditions, the developed sensor exhibited good linearity and satisfactorily renewable ability. Cu₂-β-CD/NH₂-CS-MWCNTs/GCE showed the capacity to predict the ratio of D-Trp and L-Trp in racemic mixtures and the possibility of qualitative and quantitative determination for Trp isomers. Finally, the electrochemical sensor was used to detect the Trp enantiomers in rat serum, further verifying the feasibility of the sensor in the determination of actual samples. Therefore, the electrochemical chiral sensor not only is used for the recognition of Trp enantiomers but shows great potential in practical applications.

A biomolecule chiral interface base on BSA for electrochemical recognition of amine enantiomers

A composite chiral interface (BSA-MB-MWCNTs) was prepared from bovine serum albumin (BSA), methylene blue (MB), and multi-walled carbon nanotubes (MWCNTs) for chiral recognition of amine enantiomers (1S, 2S)-N,N'-dimethyl-1,2-cyclohexanediamine and (1R, 2R)-N,N'-dimethyl-1,2-cyclohexanediamine. The BSA-based composite was characterized by field emission scanning electron microscopy (FESEM) and ultraviolet-visible spectroscopy (UV-Vis). The electrochemical responses towards the two enantiomers were analyzed via cyclic voltammetry (CV), electrochemical AC impedance method (EIS), and differential-pulse voltammetry (DPV). The experimental results showed that the combination of MWCNTs and BSA could effectively improve the overall identification efficiency, and the peak current displayed by the S-enantiomer is larger, indicating that the prepared chiral surface has stronger interaction with the R-enantiomer. Under optimized condition, the current value of the oxidation peak of the chiral modified electrode showed a good linear relationship towards the amine concentration in the range of 5.0 × 10^-3 to 5.0 × 10^-5  mmol·L^-1 . The proposed electrochemical chiral interface is easy to handle and provides a promising electrochemical sensing platform that can be used to identify chiral amine enantiomers.

Chiral Sensing Platform Based on the Self-Assemblies of Diphenylalanine and Oxalic Acid

Molecular self-assemblies offer a promising strategy for the synthesis of advanced materials for the construction of novel chiral sensing systems, and latest innovations on such self-assemblies are focused on simple building blocks in biology such as nucleic acids, lipids, and peptides. Herein, the self-assemblies of diphenylalanine (FF) and oxalic acid (OA) were prepared as the chiral sensing device for the recognition of tryptophan (Trp) isomers. Interestingly, the self-assemblies composed of OA and FF with different charging states (neutral, positively charged, and negatively charged) exhibited quite different morphologies, resulting in significantly different chiral recognition ability toward the Trp isomers. Also, in this work, the temperature sensitivity and chiral selectivity of the proposed FF-OA self-assemblies were also studied. From a practical point of view, the FF-OA self-assemblies were finally applied for the determination of precise levels of d-Trp in the racemic mixture of Trp isomers.

Voltammetric chiral discrimination of tryptophan using a multilayer nanocomposite with implemented amino-modified β-cyclodextrin as recognition element

An electrochemical chiral multilayer nanocomposite was prepared by modifying a glassy carbon electrode (GCE) via opposite-charge adsorption of amino-modified β-cyclodextrin (NH₂-β-CD), gold-platinum core-shell microspheres (Au@Pts), polyethyleneimine (PEI), and multi-walled carbon nanotubes (MWCNTs). The modified GCE was applied to the enantioselective voltammetric determination of tryprophan (Trp). The Au@Pts enable an effective immobilization of the chiral selector (NH₂-β-CD) and enhance the electrochemical performance. Scanning electron microscopy, transmission electron microscopy, UV-vis spectroscopy, FTIR and electrochemical methods were used to characterize the nanocomposite. Trp enantiomers were then determined by differential pulse voltammetry (DPV) (with a peak potential of +0.7 V vs. Ag/AgCl). The recognition efficiency was expressed by an increase in peak height by about 32% for DPV determinations of L-Trp compared to D-Trp in case of a 5 mM Trp solution of pH 7.0. Response was linear in the 10 μM to 5.0 mM concentration range, and the limits of detection were 4.3 μM and 5.6 μM with electrochemical sensitivity of 43.5 μA·μM^-1·cm^-2 and 34.6 μA·μM^-1·cm^-2 for L-Trp and D-Trp, respectively (at S/N = 3). Graphical Abstract Schematic of an electrochemical chiral multilayer nanocomposite composed of multi-walled carbon nanotubes (MWCNTs), polyethyleneimine (PEI), gold-platinum core-shell microspheres (Au@Pt) and amino-modified β-cyclodextrin (NH₂-β-CD). It was prepared by modifying a glassy carbon electrode (GCE) for enantioselective voltammetric determination of tryptophan (Trp) enantiomers.

Chiral electrochemical recognition of tryptophan enantiomers at a multi-walled carbon nanotube–N-carboxymethyl chitosan composite-modified glassy carbon electrode

A simple chiral electrochemical sensor based on N-carboxymethyl chitosan covalently binding with ethylenediamine-carboxylic multiwalled carbon nanotubes was developed for recognition of tryptophan enantiomers.

Amino acid-inspired electrochemical recognition of phenylalanine enantiomers using amphoteric chitosan

Inspired by amino acids with amphoteric groups for electrochemical enantiorecognition, amphoteric chitosan (ACCS) was prepared with chloroacetic acid and CS, and has perfect solubility in alkaline and acid solution, compared with CS.

Temporal multi-sensor system for voltammetric recognition of l- and d-tryptophan enantiomers based on generalized principal component analysis

The results of a quantitative reading of the cyclic voltammetry behavior of the tryptophan (Trp) enantiomers deposited on an electrochemically activated glassy carbon electrode (GCE) are presented.

Chiral recognition of tryptophan enantiomers using chitosan-capped silver nanoparticles: Scanometry and spectrophotometry approaches

A new, fast and inexpensive colorimetric sensor was developed for chiral recognition of tryptophan enantiomers using chitosan-capped silver nanoparticles. The function of the sensor was based on scanometry and spectrophotometry of the colored product of a reaction solution containing a mixture of chitosan-capped silver nanoparticles, phosphate buffer and tryptophan enantiomers. The image of the colored solution was taken using the scanometer and the corresponding color values were obtained using Photoshop software which subsequently were used for optimization of the experimental parameters as the analytical signal. Two types of color values system were investigated: RGB (red, green and blue values) and CMYK (cyan, magenta, yellow and black values). The color values indicated that L-tryptophan had better interaction than D-tryptophan with chitosan-capped silver nanoparticles. A linear relationship between the analytical signal and the concentration of L-tryptophan was obtained in the concentration range of 1.3 × 10^-5-4.6 × 10^-4molL^-1. Detection limits, were obtained to be 2.1 × 10^-6, 2.4 × 10^-6 and 3.8 × 10^-6molL^-1 for L-tryptophan based on R (red), G (green) and B (blue) values, respectively.

Application of Carbon Nanotubes in Chiral and Achiral Separations of Pharmaceuticals, Biologics and Chemicals

Carbon nanotubes (CNTs) possess unique mechanical, physical, electrical and absorbability properties coupled with their nanometer dimensional scale that renders them extremely valuable for applications in many fields including nanotechnology and chromatographic separation. The aim of this review is to provide an updated overview about the applications of CNTs in chiral and achiral separations of pharmaceuticals, biologics and chemicals. Chiral single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) have been directly applied for the enantioseparation of pharmaceuticals and biologicals by using them as stationary or pseudostationary phases in chromatographic separation techniques such as high-performance liquid chromatography (HPLC), capillary electrophoresis (CE) and gas chromatography (GC). Achiral MWCNTs have been used for achiral separations as efficient sorbent objects in solid-phase extraction techniques of biochemicals and drugs. Achiral SWCNTs have been applied in achiral separation of biological samples. Achiral SWCNTs and MWCNTs have been also successfully used to separate achiral mixtures of pharmaceuticals and chemicals. Collectively, functionalized CNTs have been indirectly applied in separation science by enhancing the enantioseparation of different chiral selectors whereas non-functionalized CNTs have shown efficient capabilities for chiral separations by using techniques such as encapsulation or immobilization in polymer monolithic columns.

The construction of electrochemical chiral interfaces using hydroxypropyl chitosan

A simple chiral electrochemical sensor based on hydroxypropyl chitosan (HPCS) covalently bound to multi-walled carbon nanotubes (MWCNTs) was developed for the recognition of mandelic acid (MA) enantiomers.

Construction of Electrochemical Chiral Interfaces with Integrated Polysaccharides via Amidation

Polysaccharides of sodium carboxymethyl cellulose (CMC) and chitosan (CS) were integrated together via amidation reactions between the carboxyl groups on sodium CMC and the amino groups on CS. Compared with individual sodium CMC and CS, the integrated polysaccharides with a mass ratio of 1:1, CMC-CS (1:1), exhibited a three-dimensional (3D) porous network structure, resulting in a significantly enhanced hydrophility due to the exposed polar functional groups in the CMC-CS (1:1). Chiral interfaces were constructed with the integrated polysaccharides and used for electrochemical enantiorecognition of tryptophan (Trp) isomers. The CMC-CS (1:1) chiral interfaces exhibited excellent selectivity toward the Trp isomers owing to the highly hydrophilic feature of CMC-CS (1:1) and the different steric hindrance during the formation of H bonds between Trp isomers and CMC-CS (1:1). Also, the optimization in the preparation of integrated polysaccharides such as mass ratio and combination mode (amidation or electrostatic interactions) was investigated. The CMC-CS (1:1) presented the ability of determining the percentage of d-Trp in racemic mixtures, and thus, the proposed electrochemical chiral interfaces could be regarded as a potential biosensing platform for enantiorecognition of chiral compounds.

An efficient chiral sensing platform based on graphene quantum dot–tartaric acid hybrids

Hybrids of GQDs-l-(+)–TA and GQDs-d-(−)–TA are used for the construction of a pH-sensitive chiral sensing platform.