Ultrasensitive detection of chloramphenicol using electrochemical aptamer sensor: A mini review

A novel electrochemical aptasensor based on NrGO-H-Mn3O4 NPs integrated CRISPR/Cas12a system for ultrasensitive low-density lipoprotein determination

Atherosclerosis cardiovascular disease (ASCVD) has become one of the leading death causes in humans. Low-density lipoprotein (LDL) is an important biomarker for assessing ASCVD risk level. Thus, monitoring LDL levels can be an important means for early diagnosis of ASCVD. Herein, a novel electrochemical aptasensor for determination LDL was designed based on nitrogen-doped reduced graphene oxide-hemin-manganese oxide nanoparticles (NrGO-H-Mn3O4 NPs) integrated with clustered regularly interspaced short palindromic repeats and associated proteins (CRISPR/Cas12a) system. NrGO-H-Mn3O4 NPs not only have a large surface area and remarkable enhanced electrical conductivity but also the interconversion of different valence states of iron in hemin can provide an electrical signal. Nonspecific single-stranded DNA (ssDNA) was bound to NrGO-H-Mn3O4 NPs to form a signaling probe and was immobilized on the electrode surface. The CRISPR/Cas12a system has excellent trans-cleavage activity, which can be used to cleave ssDNA, thus detaching the NrGO-H-Mn3O4 NPs from the sensing interface and attenuating the electrical signal. Significant signal change triggered by the target was ultimately obtained, thus achieving sensitive detection of the LDL in range from 0.005 to 1000.0 nM with the detection limit of 0.005 nM. The proposed sensor exhibited good stability, selectivity, and stability and achieved reliable detection of LDL in serum samples, demonstrating its promising application prospects for the diagnostic application of LDL.

Strategy, Design, and Fabrication of Electrochemical Biosensors: A Tutorial

Advanced healthcare requires novel technologies capable of real-time sensing to monitor acute and long-term health. The challenge relies on converting a real-time quantitative biological and chemical signal into a desired measurable output. Given the success in detecting glucose and the commercialization of glucometers, electrochemical biosensors continue to be a mainstay of academic and industrial research activities. Despite the wealth of literature on electrochemical biosensors, reports are often specific to a particular application (e.g., pathogens, cancer markers, glucose, etc.), and most fail to convey the underlying strategy and design, and if it is transferable to detection of a different analyte. Here we present a tutorial review for those entering this research area that summarizes the basic electrochemical techniques utilized as well as discusses the designs and optimization strategies employed to improve sensitivity and maximize signal output.

A simple molecularly imprinted electrochemical sensor for determination of propyl gallate in food samples

Propyl gallate (PG), a prevalent synthetic phenolic antioxidant found in food products, has generated considerable apprehension owing to its potential adverse impacts on human health. Therefore, as a result of the current inquiry, an innovative electrochemical sensor with improved sensitivity and selectivity for PG detection has been created. Under optimal conditions, the manufactured sensor exhibits the capability to identify PG within a broad range from 0.01 μM to 5 μM and from 5 μM to 1000 μM with a limit of detection (LOD) of 6 nM, demonstrating exceptional levels of reproducibility, repeatability, stability, and selectivity. The sensor demonstrated successful detection of PG in edible oils and mayonnaise, with good recoveries ranging from 98.44 % to 101.37 %.

Molecularly imprinted polymers-aptamer electrochemical sensor based on dual recognition strategy for high sensitivity detection of chloramphenicol

In this paper, an electrochemical sensor based on a dual recognition strategy of molecularly imprinted polymers (MIPs) and aptamer (Apt) has been designed for the high sensitivity detection of chloramphenicol (CAP). Here, MIPs and Apt have provided dual recognition sites to greatly improve the specific recognition ability of the sensor. Chitosan-multi-walled carbon nanotubes (CS-MWNTs) and AuNPs (gold nanoparticles) have been used for their excellent electrical conductivity. When CAP existed in the detection environment, the imprinted cavities with specific recognition ability bound to CAP through forces such as hydrogen bonds. It hindered the rate of electron transfer and resulted in a decrease in current value. Quantitative detection of CAP could be achieved after analyzing the relationship between the concentration of CAP and the change of current value. After optimizing the experimental parameters, the detection range of the sensor was 10-8 g/L-10-2 g/L with the limit of detection of 3.3 × 10-9 g/L, indicating that the sensor had a high practical application potential.

Unveiling synergism of polymyxin B with chloramphenicol derivatives against multidrug-resistant (MDR) Klebsiella pneumoniae

Polymyxins are last-line antibiotics against multidrug-resistant Klebsiella pneumoniae but using polymyxins alone may not be effective due to emerging resistance. A previous study found that combining polymyxin B with chloramphenicol effectively kills MDR K. pneumoniae, although the bone marrow toxicity of chloramphenicol is concerning. The aim of this study is to assess the antibacterial efficacy and cytotoxicity of polymyxin B when combined with chloramphenicol and its derivatives, namely thiamphenicol and florfenicol (reported to have lesser toxicity compared to chloramphenicol). The antibacterial activity was evaluated with antimicrobial susceptibility testing using broth microdilution and time-kill assays, while the cytotoxic effect on normal bone marrow cell line, HS-5 was evaluated using the MTT assay. All bacterial isolates tested were found to be susceptible to polymyxin B, but resistant to chloramphenicol, thiamphenicol, and florfenicol when used alone. The use of polymyxin B alone showed bacterial regrowth for all isolates at 24 h. The combination of polymyxin B and florfenicol demonstrated additive and synergistic effects against all isolates (≥ 2 log10 cfu ml-1 reduction) at 4 and 24 h, respectively, while the combination of polymyxin B and thiamphenicol resulted in synergistic killing at 24 h against ATCC BAA-2146. Furthermore, the combination of polymyxin B with florfenicol had the lowest cytotoxic effect on the HS-5 cells compared to polymyxin B combination with chloramphenicol and thiamphenicol. Overall, the combination of polymyxin B with florfenicol enhanced bacterial killing against MDR K. pneumoniae and exerted minimal cytotoxic effect on HS-5 cell line.

Fluorescent aptasensor for the ultrasensitive detection of antibiotic residue in food samples based on dumbbell DNA-mediated signal amplification

Sensitive and reliable detection of antibiotics is of great significance for environmental and food safety due to its high risk in trace concentrations. Herein, we developed a fluorescence sensing system for chloramphenicol (CAP) detection based on dumbbell DNA-mediated signal amplification. Two hairpin dimers (2H1 and 2H2) were employed as the building blocks to construct the sensing scaffolds. The CAP-aptamer binding in another hairpin H0 can liberate the trigger DNA, which then activates the cyclic assembly reaction between 2H1 and 2H2. The separation of FAM and BHQ in the formed product of cascaded DNA ladder yields a high fluorescence signal for CAP monitoring. Compared with the monomer hairpin assembly between H1 and H2, the dimer hairpin assembly between 2H1 and 2H2 exhibits enhanced signal amplification efficiency and reduced reaction time. The developed CAP sensor showed a wide linear range from 10 fM to 10 nM with a detection limit of 2 fM. Importantly, this sensing platform has been successfully applied to the determination of CAP in fish, milk, and water samples with satisfactory recovery and accuracy. With the advantages of high sensitivity, mix-and-read pattern, and robustness, our proposed CAP sensor can be used as a simple and routine tool for the detection of trace amounts of antibiotic residues.

Two colors, one-step, self-drive fluorescent strategy for chloramphenicol detection base on DNAzyme cleavage triggered hybridization chain reaction

A two colors, one-step, self-drive fluorescent strategy was developed for chloramphenicol (CAP) detection based on cyclic cleavage of molecular beacon (MB) by pincer DNA sequences. CAP can bind with its aptamer and active the enzyme-strand (E-DNA). Then the E-DNA can circularly cleave the MB on the both side of pincer DNA sequences. The cleaved fragments can self-assembly to form a long duplex and cause the great recovery of the two colors fluorescent signal. The limit of detection was as low as 0.7 pM. Importantly, the whole detection process is very simple with only one-step operation. Moreover, the two colors fluorescent signals can greatly enhance the accuracy of the result. It was also successfully used to detect CAP in actual samples.

Highly Sensitive β-Lactoglobulin Fluorescent Aptamer Biosensors Based on Tungsten Disulfide Nanosheets and DNase I-Assisted Signal Amplification

β-lactoglobulin (β-Lg) is a protein found in milk that can cause severe allergic reactions, including rash, vomiting, and diarrhea. Thus, it is crucial to develop a sensitive β-Lg detection method to protect people who are susceptible to allergies. Here, we introduce a novel and highly sensitive fluorescent aptamer biosensor for detecting β-Lg. First, a fluorescein-based dye (FAM)-labeled β-lactoglobulin aptamer (β-Lg aptamer) is adsorbed on the surface of tungsten disulfide (WS₂) nanosheets via van der Waals forces, resulting in fluorescence quenching. When β-Lg is present, the β-Lg aptamer selectively binds to β-Lg, causing a conformational change in the β-Lg aptamer and releasing it from the surface of WS₂ nanosheets, which restores the fluorescence signal. Simultaneously, DNase I in the system cleaves the aptamer bound to the target, producing a short oligonucleotide fragment and releasing β-Lg. The released β-Lg then binds to another β-Lg aptamer adsorbed on WS₂, initiating the next round of cleavage, resulting in significant amplification of the fluorescence signal. This method has a linear detection range of 1-100 ng mL^-1, and the limit of detection is 0.344 ng mL^-1. Furthermore, this approach has been successfully used for detecting β-Lg in milk samples with satisfactory results, providing new opportunities for food analysis and quality control.

A Pyridine Diketopyrrolopyrrole-Grafted Graphene Oxide Nanocomposite for the Sensitive Detection of Chloramphenicol by a Direct Electrochemical Method

A novel direct electrochemical sensor, based on a pyridine diketopyrrolopyrrole/graphene oxide nanocomposite-modified glass carbon electrode (PDPP/GO/GCE), was developed herein for chloramphenicol (CAP) detection. In this research, PDPP was grafted onto GO by C-N bonds and π-π conjugation, which were synergistically confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The morphology study shows that PDPP was uniformly dispersed on the GO in the form of particles. The constructed PDPP/GO/GCE showed the strongest response signal to CAP in the evaluation of electrocatalytic activity by cyclic voltammetry compared to that of GO-modified and unmodified GCE, revealing that the introduction of PDPP can effectively improve the electrocatalytic activity of sensors. Moreover, PDPP/GO/GCE had a noticeable current signal when the concentration of CAP was as low as 0.001 uM and had a wide line range (0.01-780 uM) with a low limit of detection (1.64 nM). The sensor properties of the as-obtained PDPP/GO/GCE involved anti-interference, reproducibility, and stability, which were also evaluated and revealed satisfactory results.

An Effective Electrochemical Platform for Chloramphenicol Detection Based on Carbon-Doped Boron Nitride Nanosheets

Currently, accurate quantification of antibiotics is a prerequisite for health care and environmental governance. The present work demonstrated a novel and effective electrochemical strategy for chloramphenicol (CAP) detection using carbon-doped hexagonal boron nitride (C-BN) as the sensing medium. The C-BN nanosheets were synthesized by a molten-salt method and fully characterized using various techniques. The electrochemical performances of C-BN nanosheets were studied using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the electrocatalytic activity of h-BN was significantly enhanced by carbon doping. Carbon doping can provide abundant active sites and improve electrical conductivity. Therefore, a C-BN-modified glassy carbon electrode (C-BN/GCE) was employed to determine CAP by differential pulse voltammetry (DPV). The sensor showed convincing analytical performance, such as a wide concentration range (0.1 µM-200 µM, 200 µM-700 µM) and low limit of detection (LOD, 0.035 µM). In addition, the proposed method had high selectivity and desired stability, and can be applied for CAP detection in actual samples. It is believed that defect-engineered h-BN nanomaterials possess a wide range of applications in electrochemical sensors.

Electrochemical Aptasensor Based on Au Nanoparticles Decorated Porous Carbon Derived from Metal-Organic Frameworks for Ultrasensitive Detection of Chloramphenicol

A facile and sensitive electrochemical aptamer sensor (aptasensor) based on Au nanoparticles-decorated porous carbon (AuNPs/PC) composite was developed for the efficient determination of the antibiotic drug chloramphenicol (CAP). AuNPs modified metal-organic framework (AuNPs/ZIF-8) is applied as a precursor to synthesize the porous carbon with homogeneous AuNPs distribution through a direct carbonization step under nitrogen atmosphere. The as-synthesized AuNPs/PC exhibits high surface area and improved conductivity. Moreover, the loading AuNPs could enhance the attachment of the aptamers on the surface of electrode through the Au–S bond. When added to CAP, poorly conductive aptamer-CAP complexes are formed on the sensor surface, which increases the hindrance to electron transfer resulting in a decrease in electrochemical signal. Based on this mechanism, the developed CAP aptasensor represents a wide linear detection range of 0.1 pM to 100 nM with a low detection limit of 0.03 pM (S/N = 3). In addition, the proposed aptasensor was employed for the analysis of CAP in honey samples and provided satisfactory recovery.

Recent Advances in Metal Nanocomposite-Based Electrochemical (Bio)Sensors for Pharmaceutical Analysis

Rising rates of drug abuse and pharmaceutical pollution throughout the world as a consequence of increased drug production and utilization pose a serious risk to public health and to environmental integrity. It is thus critical that reliable analytical approaches to detecting drugs and their metabolites in a range of sample matrices be developed. Recent advances in the design of nanomaterial-based electrochemical sensors and biosensors have enabled promising new approaches to pharmaceutical analysis. In particular, the development of a range of novel metal nanocomposites with enhanced catalytic properties has provided a wealth of opportunities for the design of rapid and reliable platforms for the detection of specific pharmaceutical compounds. The present review provides a comprehensive overview of representative metal nanocomposites with synergistic properties and their recent (2017-2022) application in the context of electrochemical sensing as a means of detecting specific antibiotic, tuberculostatic, analgesic, antineoplastic, antipsychotic, and antihypertensive drugs. In discussing these applications, we further explore a variety of testing-related principles, fabrication approaches, characterization techniques, and parameters associated with the sensitivity and selectivity of these sensor platforms before surveying the future outlook regarding the fabrication of next-generation (bio)sensor platforms for use in pharmaceutical analysis.

Recent advances in electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs) for sensing pharmaceutical and food pollutants

Foodborne-related infections due to additives and pollutants pose a considerable task for food processing enterprises. Therefore, the competent, cost-effective, and quick investigation of nutrition additives and contaminants is essential to reduce the threat of public fitness problems. The electrochemical sensor (ECS) shows facile and potent analytical approaches desirable for food protection and quality inspection over traditional methods. The consequence of a broad display of nanomaterials has paved the path for their relevance in designing high-performance ECSs appliances for medical diagnostics and conditions and food protection. This review article has discussed the importance of electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs). Initially, we have demonstrated the types of pharmaceutical and food/agriculture pollutants (such as pesticides, heavy metals, antibiotics and other medical drugs) present in water. Subsequently, we have compiled the information on electrochemical techniques (such as voltammetric and electrochemical impedance spectroscopy) and their crucial parameters for detecting pollutants. Further, the applications of CNMs for sensing pharmaceutical and food pollutants have been demonstrated in detail. Finally, the topic has been concluded with existing challenges and future prospects.

Construction of Electrochemical Sensors for Antibiotic Detection Based on Carbon Nanocomposites

Excessive antibiotic residues in food can cause detrimental effects on human health. The establishment of rapid, sensitive, selective, and reliable methods for the detection of antibiotics is highly in demand. With the inherent advantages of high sensitivity, rapid analysis time, and facile miniaturization, the electrochemical sensors have great potential in the detection of antibiotics. The electrochemical platforms comprising carbon nanomaterials (CNMs) have been proposed to detect antibiotic residues. Notably, with the introduction of functional CNMs, the performance of electrochemical sensors can be bolstered. This review first presents the significance of functional CNMs in the detection of antibiotics. Subsequently, we provide an overview of the applications for detection by enhancing the electrochemical behaviour of the antibiotic, as well as a brief overview of the application of recognition elements to detect antibiotics. Finally, the trend and the current challenges of electrochemical sensors based on CNMs in the detection of antibiotics is outlined.

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

Microbial Acoustical Analyzer for Antibiotic Indication

In this study, a compact acoustic analyzer for express analysis of antibiotics based on a piezoelectric resonator with a lateral electric field and combined with a computer was developed. The possibility of determining chloramphenicol in aqueous solutions in the concentration range of 0.5-15 μg/mL was shown. Bacterial cells that are sensitive to this antibiotic were used as a sensory element. The change in the electrical impedance modulus of the resonator upon addition of the antibiotic to the cell suspension served as an analytical signal. The analysis time did not exceed 4 min. The correlation of the experimental results of an acoustic sensor with the results obtained using the light phase-contrast microscopy and standard microbiological analysis was established. The compact biological analyzer demonstrated stability, reproducibility, and repeatability of results.

MXene-AuNP-Based Electrochemical Aptasensor for Ultra-Sensitive Detection of Chloramphenicol in Honey

A simple and label-free electrochemical aptasensor was developed for ultra-sensitive determination of chloramphenicol (CAP) based on a 2D transition of metal carbides (MXene) loaded with gold nanoparticles (AuNPs). The embedded AuNPs not only inhibit the aggregation of MXene sheets, but also improve the quantity of active sites and electronic conductivity. The aptamers (Apts) were able to immobilize on the MXene–AuNP modified electrode surface through Au–S interaction. Upon specifically binding with CAP with high affinity, the CAP–Apt complexes produced low conductivity on the aptasensor surface, leading to a decreased electrochemical signal. The resulting current change was quantitatively correlated with CAP concentration. Under optimized experimental conditions, the constructed aptasensor exhibited a good linear relationship within a wide range of 0.0001–10 nM and with a low detection limit of 0.03 pM for CAP. Moreover, the developed aptasensor has been applied to the determination of CAP concentration in honey samples with satisfactory results.

New insight into degradation of chloramphenicol using a nanoporous Pd/Co3O4cathode: characterization and pathways analysis

The growing chloramphenicol (CAP) in wastewater brought a serious threat to the activity of activated sludge and the spread of antibiotics resistance bacteria. In this study, a highly ordered nanoporous Co₃O₄layer on Co foil through anodization was prepared as cathode for nitro-group reduction and electrodeposited with Pd particles for dechlorination to reduce CAP completely. After 3 h treatment, almost 100% of CAP was reduced. Co²⁺ions in Co₃O₄served as catalytic sites for electrons transfer to CAP through a redox circle Co²⁺-Co³⁺-Co²⁺, which triggered nitro-group reduction at first. With the presence of Pd particles, more atomic H* were generated for dechlorination, which increased 22% of reduction efficiency after 3 h treatment. Therefore, a better capacity was achieved by Pd/Co₃O₄cathode (K = 0.0245 min^-1,Kis reaction constant) than by other cathodes such as Fe/Co₃O₄(K = 0.0182 min^-1), Cu/Co₃O₄(K = 0.0164 min^-1), and pure Co₃O₄(K = 0.0106 min^-1). From the proposed reaction pathway, the ultimate product was carbonyl-reduced AM (dechlorinated aromatic amine product of CAP) without antibacterial activity, which demonstrated this cathodic technology was a feasible way for wastewater pre-treatment.

Ultrasensitive and facile detection of multiple trace antibiotics with magnetic nanoparticles and core-shell nanostar SERS nanotags

Ultrasensitive, multiplex, rapid, and accurate quantitative determination of trace antibiotics remains a challenging issue, which is of importance to public health and safety. Herein, we presented a multiplex strategy based on magnetic nanoparticles and surface-enhanced Raman scattering (SERS) nanotags for simultaneous detection of chloramphenicol (CAP) and tetracycline (TTC). In practice, SERS nanotags based on Raman reporter probes (RRPs) encoded gold-silver core-shell nanostars were used as detection labels for identifying different types of antibiotics, and the magnetic nanoparticles could be separated simply by magnetic force, which significantly improves the detection efficiency, reduces the analysis cost, and simplifies the operation. Our results demonstrate that the as-proposed assay possesses the capacities of high sensitivity and multiplexing with the limits of detection (LODs) for CAP and TTC of 159.49 and 294.12 fg mL^-1, respectively, as well as good stability and reproducibility, and high selectivity and reliability. We believe that this strategy holds a great promising perspective for the detection of trace amounts of antibiotics in microsystems, which is crucial to our life. Additionally, the assay can also be used to detect other illegal additives by altering the appropriate antibodies or aptamers.

A signal-on photoelectrochemical aptasensor for chloramphenicol assay based on 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays

Severe challenges are still remained for development of highly sensitive, selective and stable photoelectrochemical (PEC) sensing technology, albeit with its broad application for chloramphenicol (CAP) detection. Herein, a novel "signal-on" PEC aptasensor was fabricated based on a 3D self-supporting Z-scheme AgI/Ag/BiOI heterojunction arrays subtly integrated with in-situ formed biocatalytic precipitation (BCP) for highly sensitive and selective determination of CAP. Impressively, the HRP modified CAP aptamer (HRP-CAP aptamer) was released from the electrode by its strong affinity to the introduced CAP, and gradually terminated the BCP reaction, in turn recovering the photocurrent. By virtues of the 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays and BCP signal amplification strategy, the resultant PEC sensor exhibited a wide linear range of 2-250 nM with a limit of detection (LOD) as low as 0.226 nM (S/N = 3). This work opens a new avenue for design of PEC aptasensing strategy and exhibits the marvelous potential in bioanalysis of environmental samples.

Water-Stable 1D Double-Chain Cu Metal-Organic Framework-based Electrochemical Biosensor for Detecting l-Tyrosine

An electrochemical biosensor based on a water-stable one-dimensional double-chain Cu(II) metal-organic framework (Cu-MOF) directly was constructed for efficiently recognizing l-tyrosine (l-Tyr) in biomimic environments. Cu-MOF: {[Cu(bpe)(fdc) (H₂O)(DMF)]·0.5H₂O}_n (bpe = 1,2-di(4-pyridyl)ethylene, H₂fdc = 2,5-furandicarboxylic acid, namely, Cu-1) was synthesized by a hydrothermal method. It was characterized by IR, scanning electron microscopy, atomic force microscopy, and PXRD techniques. Cu-1 exhibited extreme solvent and thermal stability as well as excellent electroconductive character. It was coated on a glassy carbon electrode (GCE) surface to prepare an electrochemical biosensor (Cu-1/GCE) which showed preferable biosensing ability toward l-Tyr. This Cu-MOF electrochemical biosensor showed simple operation and high sensitivity toward l-Tyr in the concentration range from 0.01 to 0.09 mM. The detection limit is 5.822 μM. Furthermore, Cu-1/GCE showed extremely excellent selectivity to l-Tyr in a biomimic environment with several amino acid interferents. This new strategy exhibits great potential applications for designing MOFs with excellent electrochemical activity.