Direct electron transfer of horseradish peroxidase on Nafion-cysteine modified gold electrode

Glucose Biosensor Based on Glucose Oxidase Immobilized on BSA Cross-Linked Nanocomposite Modified Glassy Carbon Electrode

Glucose sensors based blood glucose detection are of great significance for the diagnosis and treatment of diabetes because diabetes has aroused wide concern in the world. In this study, bovine serum albumin (BSA) was used to cross-link glucose oxidase (GOD) on a glassy carbon electrode (GCE) modified by a composite of hydroxy fullerene (HFs) and multi-walled carbon nanotubes (MWCNTs) and protected with a glutaraldehyde (GLA)/Nafion (NF) composite membrane to prepare a novel glucose biosensor. The modified materials were analyzed by UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and cyclic voltammetry (CV). The prepared MWCNTs-HFs composite has excellent conductivity, the addition of BSA regulates MWCNTs-HFs hydrophobicity and biocompatibility, and better immobilizes GOD on MWCNTs-HFs. MWCNTs-BSA-HFs plays a synergistic role in the electrochemical response to glucose. The biosensor shows high sensitivity (167 μA·mM^-1·cm^-2), wide calibration range (0.01-3.5 mM), and low detection limit (17 μM). The apparent Michaelis-Menten constant Kmapp is 119 μM. Additionally, the proposed biosensor has good selectivity and excellent storage stability (120 days). The practicability of the biosensor was evaluated in real plasma samples, and the recovery rate was satisfactory.

Bacterial Peroxidase on Electrochemically Reduced Graphene Oxide for Highly Sensitive H2 O2 Detection

Peroxidase enzymes enable the construction of electrochemical sensors for highly sensitive and selective quantitative detection of various molecules, pathogens and diseases. Herein, we describe the immobilization of a peroxidase from Bacillus s. (BsDyP) on electrochemically reduced graphene oxide (ERGO) deposited on indium tin oxide (ITO) and polyethylene terephthalate (PET) layers. XRD, SEM, AFM, FT-IR and Raman characterization of the sensor confirmed its structural integrity and a higher enzyme surface occupancy. The BsDyP-ERGO/ITO/PET electrode performed better than other horseradish peroxidase-based electrodes, as evinced by an improved electrochemical response in the nanomolar range (linearity 0.05-280 μM of H2 O2 , LOD 32 nM). The bioelectrode was mechanically robust, active in the 3.5-6 pH range and exhibited no loss of activity upon storage for 8 weeks at 4 °C.

Glucose Oxidase Immobilized on a Functional Polymer Modified Glassy Carbon Electrode and Its Molecule Recognition of Glucose

In the present study, a glucose oxidase (GluOx) direct electron transfer was realized on an aminated polyethylene glycol (mPEG), carboxylic acid functionalized multi-walled carbon nanotubes (fMWCNTs), and ionic liquid (IL) composite functional polymer modified glassy carbon electrode (GCE). The amino groups in PEG, carboxyl groups in multi-walled carbon nanotubes, and IL may have a better synergistic effect, thus more effectively adjust the hydrophobicity, stability, conductivity, and biocompatibility of the composite functional polymer film. The composite polymer membranes were characterized by cyclic voltammetry (CV), ultraviolet-visible (UV-Vis) spectrophotometer, fluorescence spectroscopy, electrochemical impedance spectroscopy (EIS), and transmission electron microscopy (TEM), respectively. In 50 mM, pH 7.0 phosphate buffer solution, the formal potential and heterogeneous electron transfer constant (ks) of GluOx on the composite functional polymer modified GCE were -0.27 V and 6.5 s-1, respectively. The modified electrode could recognize and detect glucose linearly in the range of 20 to 950 μM with a detection limit of 0.2 μM. The apparent Michaelis-Menten constant (Kmapp) of the modified electrode was 143 μM. The IL/mPEG-fMWCNTs functional polymer could preserve the conformational structure and catalytic activity of GluOx and lead to high sensitivity, stability, and selectivity of the biosensors for glucose recognition and detection.

Detection of Guanine and Adenine Using an Aminated Reduced Graphene Oxide Functional Membrane-Modified Glassy Carbon Electrode

A new electrochemical sensor based on a Nafion, aminated reduced graphene oxide and chitosan functional membrane-modified glassy carbon electrode was proposed for the simultaneous detection of adenine and guanine. Fourier transform-infrared spectrometry (FTIR), transmission electron microscopy (TEM), and electrochemical methods were utilized for the additional characterization of the membrane materials. The prepared electrode was utilized for the detection of guanine (G) and adenine (A). The anodic peak currents to G and A were linear in the concentrations ranging from 0.1 to 120 μM and 0.2 to 110 μM, respectively. The detection limits were found to be 0.1 μM and 0.2 μM, respectively. Moreover, the modified electrode could also be used to determine G and A in calf thymus DNA.

Insight into the mechanism revealing the peroxidase mimetic catalytic activity of quaternary CuZnFeS nanocrystals: colorimetric biosensing of hydrogen peroxide and glucose

Artificial enzyme mimetics have attracted immense interest recently because natural enzymes undergo easy denaturation under environmental conditions restricting practical usefulness. We report for the first time chalcopyrite CuZnFeS (CZIS) alloyed nanocrystals (NCs) as novel biomimetic catalysts with efficient intrinsic peroxidase-like activity. Novel peroxidase activities of CZIS NCs have been evaluated by catalytic oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). CZIS NCs demonstrate the synergistic effect of elemental composition and photoactivity towards peroxidase-like activity. The quaternary CZIS NCs show enhanced intrinsic peroxidase-like activity compared to the binary NCs with the same constituent elements. Intrinsic peroxidase-like activity has been correlated with the energy band position of CZIS NCs extracted using scanning tunneling spectroscopy and ultraviolet photoelectron spectroscopy. Kinetic analyses indicate Michaelis-Menten enzyme kinetic model catalytic behavior describing the rate of the enzymatic reaction by correlating the reaction rate with substrate concentration. Typical color reactions arising from the catalytic oxidation of TMB over CZIS NCs with H2O2 have been utilized to establish a simple and sensitive colorimetric assay for detection of H2O2 and glucose. CZIS NCs are recyclable catalysts showing high efficiency in multiple uses. Our study may open up the possibility of designing new photoactive multi-component alloyed NCs as enzyme mimetics in biotechnology applications.

Horseradish peroxidase immobilization on carbon nanodots/CoFe layered double hydroxides: direct electrochemistry and hydrogen peroxide sensing

Carbon nanodots and CoFe layered double hydroxide composites (C-Dots/LDHs) were prepared via simply mixing C-Dots and CoFe-LDHs. The as-prepared composites were used for the immobilization of horseradish peroxidase (HRP) on the glass carbon (GC) electrode. The electrochemical behavior of the HRP/C-Dots/LDHs/GC electrode and its application as a H2O2 biosensor were investigated. The results indicated that HRP immobilized by C-Dots/LDHs retained the activity of enzyme and displayed quasi-reversible redox behavior and fast electron transfer with an electron transfer rate constant ks of 8.46 s(-1). Under optimum experimental conditions, the HRP/C-Dots/LDHs/GC electrode displayed good electrocatalytic reduction activity and excellent analytic performance toward H2O2. The H2O2 biosensor showed a linear range of 0.1-23.1 μM (R(2) = 0.9942) with a calculated detection limit of 0.04 μM (S/N = 3). In addition, the biosensor exhibited high sensitivity, good selectivity, acceptable reproducibility and stability. The superior properties of this biosensor are attributed to the synergistic effect of HRP, C-Dots and CoFe-LDHs, which has been proved by investigating their electrochemical response to H2O2. Thus the C-Dots and LDHs composites provide a promising platform for the immobilization of redox enzymes and construction of sensitive biosensors.

Direct electrochemistry of hemoglobin immobilized on a functionalized multi-walled carbon nanotubes and gold nanoparticles nanocomplex-modified glassy carbon electrode

Direct electron transfer of hemoglobin (Hb) was realized by immobilizing Hb on a carboxyl functionalized multi-walled carbon nanotubes (FMWCNTs) and gold nanoparticles (AuNPs) nanocomplex-modified glassy carbon electrode. The ultraviolet-visible absorption spectrometry (UV-Vis), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) methods were utilized for additional characterization of the AuNPs and FMWCNTs. The cyclic voltammogram of the modified electrode has a pair of well-defined quasi-reversible redox peaks with a formal potential of −0.270 ± 0.002 V (vs. Ag/AgCl) at a scan rate of 0.05 V/s. The heterogeneous electron transfer constant (ks) was evaluated to be 4.0 ± 0.2 s⁻¹. The average surface concentration of electro-active Hb on the surface of the modified glassy carbon electrode was calculated to be 6.8 ± 0.3 × 10⁻¹⁰ mol cm⁻². The cathodic peak current of the modified electrode increased linearly with increasing concentration of hydrogen peroxide (from 0.05 nM to 1 nM) with a detection limit of 0.05 ± 0.01 nM. The apparent Michaelis-Menten constant (K_m^app) was calculated to be 0.85 ± 0.1 nM. Thus, the modified electrode could be applied as a third generation biosensor with high sensitivity, long-term stability and low detection limit.

Horseradish Peroxidase Immobilization on Amine Functionalized Carbon Nano Tubes: Direct Electrochemistry and Bioelectrocatalysis

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO2-coated multiwalled carbon nanotubes (NH2 TiO2 CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH2- TiO2 - CNT nano-composite. These techniques showed that the NH2 TiO2CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH2-TiO2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (Δ Ep) of 70.6 m V and a formal potential ( E°’) of - 367.65 m V (versus Ag/AgCl) in phosphate buffer solution. The charge transfer coefficient (a) and the apparent charge transfer rate constant (ks) were found to be 0.34 and 2.08 s-1 respectively. The prepared biosensor responded to H2O2 with a linear range, detection limit, sensitivity and response time of 1.0 × 10−9 to 1.0 × 10 −7 M, 0.786nM, 28.4 μA A nM−1 and 3 s, respectively.

Direct electron transfer enhancement of covalently bound tyrosinase to glassy carbon via Woodward's reagent K

This work describes the reaction mechanism for chemical modification of tyrosinase by Woodward's Reagent K and its covalent attachment to a glassy carbon electrode. The spectrophotometric studies revealed that the modification does not cause a significant structural change to tyrosinase. The direct electrochemistry of modified enzyme was achieved after immobilization on an oxidatively activated glassy carbon electrode. The enzyme film exhibited a pair of well-defined quasi-revesible voltammetric peaks corresponding to the Cu (II)/Cu (I) redox couple located in the active site of tyrosinase. The formal potential of immobilized enzyme was measured to be 90mV (vs. Ag/AgCl) in phosphate buffer solution at pH 7.0. The charge-transfer coefficient and apparent heterogeneous electron transfer rate constant were estimated to be 0.5 and 0.9±0.06s(-1), respectively. Finally, the electrochemical behavior of the immobilized enzyme in the presence of caffeic acid and L-3,4-dihydroxyphenylalanine as substrates was investigated. The amperometric study of biosensor toward L-3,4-dihydroxyphenylalanine resulted a linear response in the concentration range from 1.66×10(-6) to 8.5×10(-5)M with detection limit of 9.0×10(-5)M and sensitivity of 135mAμM(-1)cm(-2).

Electrochemical detection of glyphosate herbicide using horseradish peroxidase immobilized on sulfonated polymer matrix

This paper describes the use of horseradish peroxidase (HRP) based biosensor for novel detection of glyphosate herbicide. The biosensor was prepared by electrochemically depositing poly(2,5-dimethoxyaniline) (PDMA) doped with poly(4-styrenesulfonic acid) (PSS) onto the surface of a gold electrode followed by electrostatic attachment of the enzyme HRP onto the PDMA-PSS composite film. Fourier transform infrared (FTIR) and UV-Vis spectrometry inferred that HRP was not denatured during its immobilization on PDMA-PSS composite film. The biosensing principle was based on the determination of the cathodic responses of the immobilized HRP to H(2)O(2), before and after incubation in glyphosate standard solutions. Glyphosate inhibited the activity of HRP causing a decrease in its response to H(2)O(2). The determination of glyphosate was achieved in the range of 0.25-14.0 microg L(-1) with a detection limit of 1.70 microg L(-1). The apparent Michaelis-Menten constant (calculated for the HRP/PDMA-PSS biosensor in the presence and absence of glyphosate was found to be 7.73 microM and 7.95 microM respectively.

Direct monitoring of pollutants based on an electrochemical biosensor with novel peroxidase (POX1B)

A biosensor for the monitoring of phenolic compounds based on a new protein named POX(1B) purified from garlic which demonstrates similar biochemical properties to peroxidase is investigated. The enzyme was immobilized into chitosan microspheres with covalent link. The properties of the biosensor were analyzed with Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and cyclic voltammetry (CV). FT-IR demonstrates the covalent attachment of POX(1B) into chitosan and SEM shows high dispersion of the POX(1B) into the chitosan microspheres. The redox potential of POX(1B) in chitosan is 147 mV vs. SCE, which is much higher than reported works using HRP, demonstrating excellent direct electrochemical behaviour of the POX(1B). The electrocatalytic activity of the obtained biosensor towards chlorophenols derivatives in a large range from 10 pM to 10 microM was demonstrated. The mediator free POX(1B)-based biosensor exhibited high sensitivity towards 2,6-dichlorophenol, 4-chlorophenol and pentachlorophenol. A detection limit of 1 pM in the case of 4-chlorophenol was demonstrated with kinetic constant K(m,app) of 0.42 microM with high rapidity of electrochemical response of the biosensor of 1 s.

Estudo do comportamento eletroquímico da enzima peroxidase na presença de peróxido de hidrogênio e ácido 5-aminossalicílico

O comportamento eletroquímico da enzima peroxidase (HRP) foi estudado utilizando o peróxido de hidrogênio como substrato enzimático e o ácido 5-aminossalicílico (5-ASA) como mediador de elétrons sobre eletrodo de grafite. Diversos parâmetros foram otimizados, tais como, o potencial aplicado à técnica amperométrica fixado em -0,125V, a solução tampão fosfato-citrato 0,1 mol L-1 pH 5,0 como eletrólito suporte e a proporção entre o 5-ASA e H2O2 em 1:7, entre outros. Foi observada a catálise da reação de oxidação do peróxido de hidrogênio na presença da enzima HRP e do mediador 5-ASA. O produto dessa oxidação foi reduzido na superfície do eletrodo, evidenciando um significativo aumento na intensidade da corrente catódica.