Recognition of dimethoate carried by bi-layer electrodeposition of silver nanoparticles and imprinted poly-o-phenylenediamine

Molecularly imprinted polymer dual electrochemical sensor for the one-step determination of albuminuria to creatinine ratio (ACR)

The urinary albumin to creatinine ratio (ACR) is a convenient and accurate biomarker of chronic kidney disease (CKD). An electrochemical sensor for the quantification of ACR was developed based on a dual screen-printed carbon electrode (SPdCE). The SPdCE was modified with carboxylated multiwalled carbon nanotubes (f-MWCNTs) and redox probes of polymethylene blue (PMB) for creatinine and ferrocene (Fc) for albumin. The modified working electrodes were then molecularly imprinted with coated with polymerized poly-o-phenylenediamine (PoPD) to form surfaces that could be separately imprinted with creatinine and albumin template molecules. The seeded polymer layers were polymerized with a second coating of PoPD and the templates were removed to form two different molecularly imprinted polymer (MIP) layers. The dual sensor presented recognition sites for creatinine and albumin on different working electrodes, enabling the measurement of each analyte in one potential scan of square wave voltammetry (SWV). The proposed sensor produced linear ranges of 5.0-100 ng mL^-1 and 100-2500 ng mL^-1 for creatinine, and 5.0-100 ng mL^-1 for albumin. LODs were 1.5 ± 0.2 ng mL^-1 and 1.5 ± 0.3 ng mL^-1, respectively. The dual MIP sensor was highly selective and stable for seven weeks at room temperature. The ACRs obtained using the proposed sensor compared well (P > 0.05) with the results from immunoturbidimetric and enzymatic methods.

A ratiometric electrochemical biosensor via alkaline phosphatase mediated dissolution of nano-MnO2 and Ru(III) redox recycling for the determination of dimethoate

A sensitive and ratiometric electrochemical biosensor was developed for the determination of dimethoate via alkaline phosphatase (ALP) mediated dissolution of nano-MnO₂ and [Ru(NH₃)₆]³⁺(Ru(III)) redox recycling. The electroactive probe Ru(III) was adsorbed on the nano-MnO₂ with the high specific surface area through electrostatic interaction to form the MnO₂-Ru(III) nanocomposite, which was then fixed on the surface of the glassy carbon electrode. When the dimethoate inhibited the catalytic activity of ALP in a homogeneous system, the hydrolysate L-ascorbic acid (AA) produced by ALP hydrolysis of L-ascorbic acid-trisodium 2-phosphate (AAP) decreased. The solution was then incubated with a glassy carbon electrode modified by MnO₂-Ru(III). At this time, only a small amount of MnO₂-Ru(III) was decomposed and Ru(III) was rapidly electroreduced to Ru(II) on the surface of the electrode. The in-situ produced Ru(II) was chemically oxidized back to Ru(III) by Fe(III). The redox recycling of Ru(III) was completed and the Ru(III) reduction current signal was amplified. The process consumed part of Fe(III) to reduce the reduction current signal of Fe(III), and the ratio of the two reduction currents (I_Ru(III)/I_Fe(III)) increased significantly. The I_Ru(III)/I_Fe(III) value increased with the increase of dimethoate concentration in the linear range of 0.01-300 ng mL^-1, and the detection limit was 6.3 pg mL^-1. It has been successfully applied to the determination of dimethoate in oilseed rape and lettuce with a satisfactory result.

An efficient LSPR method to quantitatively detect dimethoate: Development, characterization and evaluation

In recent years, there has been growing concern among consumers about pesticide contamination in fruits. Therefore, rapid, reliable, and consistent detection methods for OPPs, especially dimethoate, are crucially needed. The existing quantitative methods for detecting dimethoate are not suitable for rapid measuring system such as the dimethoate samples from two channels. Hence this paper examines the utilization of a dual-channel system for utilize the absorption variations of the Localized Surface Plasmon Resonance (LSPR) bands of gold nanoparticles (AuNPs) were investigate for detection of dimethoate. Under optimized conditions, the relationship between concentrations of dimethoate and absorbance ratios (A(520)/A(640)) was linearly found in the concentration range of 10–100 nM. Result from the experiment shows that both channels exhibit a linear correlation coefficient as high as 0.97 and a limit of detection (LOD) as low as 5.5 nM. This LSPR detection system was characterized by testing the dimethoate in apple samples and the recovery rates were found to be in the range of 85.90% to 107.37%. The proposed dual-channel LSPR system for detecting dimethoate creating a new approach for detecting organophosphate insecticide in agricultural fields. It could lay the foundation for designing a high-throughput analysis of the insecticides using a wavelength division multiplexing switch (WDMS).

Molecularly Imprinted Electrochemical Sensors: Analytical and Pharmaceutical Applications Based on Ortho-Phenylenediamine Polymerization

Background:

The molecular imprinting technique has been applied in many fields including separation, artificial antibody mimics, catalysis, sensing studies, and drug delivery. The reasons for the popularity of this technique among the researchers are high selectivity due to the cavities that are formed on the polymer surface for the specific analyte, high robustness, high durability under extreme conditions and low cost. When these advantages are combined with the advantages of electrochemical methods such as rapid response time, ease of use, cheapness and miniaturizability, Molecularly Imprinted Polymer (MIP) based electrochemical sensors turn out to be a widely-preferred sensing tool.

Objective:

This article provides the reader with information on MIP-based electrochemical sensors and reviews the applications of the MIP sensors prepared by electropolymerization of orthophenylenediamine, a monomer whose mechanical and chemical stability is very high.

Results and Conclusion:

The literature survey summarized in this review shows that cyclic voltammetry is the most widely preferred electrochemical technique for electropolymerization of o-PD. The media chosen is generally acetate or phosphate buffers with different pH values. Although there are numerous solvents used for template removal, generally methanol and NaOH have been chosen.

Multivariate optimization of mebeverine analysis using molecularly imprinted polymer electrochemical sensor based on silver nanoparticles

Thin film of a moleculary imprinted polymer (MIP) based on electropolymerization method with sensitive and selective binding sites for mebeverine (MEB) was developed. This film was cast on pencil graphite electrode (PGE) by electrochemical polymerization in solution of pyrrole (PY) and template MEB via cyclic voltammetry scans and further electrodeposition of silver nanoparticles (AgNPs). Several parameters controlling the performance of the silver nano particles MIP pencil graphite electrode (AgNPs-MIP-PGE) including concentration of PY(mM) concentration of mebeverine (mM), number of cycles in electropolymerization, scan rate of CV process (mV. s⁻¹), deposition time of AgNPs on to the MIP surface (s), stirring rate of loading solution (rpm), electrode loading time (min), pH of Britton–Robinson Buffer (BRB) solution were examined and optimized using multivariate optimization methods such as Plackett–Burman design (PBD) and central composite design (CCD). Two dynamic linear ranges of concentration for the MIP sensor were obtained as. 1 × 10⁻⁸ to 1 × 10⁻⁶ and 1 × 10⁻⁵ to 1 × 10⁻³ M with the limit of detection (LOD) of 8.6 × 10⁻⁹ M (S/N = 3). The proposed method was successfully intended for the determination of MEB in real samples (serum, capsule). The sensor was showed highly reproducible response (RSD 1.1%) to MEB concentration.

CO2 reduction to acetate in mixtures of ultrasmall (Cu) n ,(Ag) m bimetallic nanoparticles

Monodispersed mixtures of 6-nm Cu and Ag nanoparticles were prepared by electrochemical reduction on electrochemically polymerized poly-Fe(vbpy)₃(PF₆)₂ film electrodes on glassy carbon. Conversion of the complex to poly-Fe(vbpy)₂(CN)₂ followed by surface binding of salts of the cations and electrochemical reduction gave a mixture of chemically distinct clusters on the surface, (Cu) _m ,(Ag) _n |polymer|glassy carbon electrode (GCE), as shown by X-ray photoelectron spectroscopy (XPS) measurements. A (Cu)₂,(Ag)₃|(80-monolayer-poly-Fe(vbpy)₃²⁺|GCE electrode at -1.33 V vs. reversible hydrogen electrode (RHE) in 0.5 M KHCO₃, with 8 ppm added benzotriazole (BTA) at 0 °C, gave acetate with a faradaic efficiency of 21.2%.

Current Progress of Nanomaterials in Molecularly Imprinted Electrochemical Sensing

Nanomaterials have received much attention during the past decade because of their excellent optical, electronic, and catalytic properties. Nanomaterials possess high chemical reactivity, also high surface energy. Thus, provide a stable immobilization platform for biomolecules, while preserving their reactivity. Due to the conductive and catalytic properties, nanomaterials can also enhance the sensitivity of molecularly imprinted electrochemical sensors by amplifying the electrode surface, increasing the electron transfer, and catalyzing the electrochemical reactions. Molecularly imprinted polymers that contain specific molecular recognition sites can be designed for a particular target analyte. Incorporating nanomaterials into molecularly imprinted polymers is important because nanomaterials can improve the response signal, increase the sensitivity, and decrease the detection limit of the sensors. This study describes the classification of nanomaterials in molecularly imprinted polymers, their analytical properties, and their applications in the electrochemical sensors. The progress of the research on nanomaterials in molecularly imprinted polymers and the application of nanomaterials in molecularly imprinted polymers is also reviewed.

Stimulus-responsive hydrogels: Theory, modern advances, and applications

Over the past century, hydrogels have emerged as effective materials for an immense variety of applications. The unique network structure of hydrogels enables very high levels of hydrophilicity and biocompatibility, while at the same time exhibiting the soft physical properties associated with living tissue, making them ideal biomaterials. Stimulus-responsive hydrogels have been especially impactful, allowing for unprecedented levels of control over material properties in response to external cues. This enhanced control has enabled groundbreaking advances in healthcare, allowing for more effective treatment of a vast array of diseases and improved approaches for tissue engineering and wound healing. In this extensive review, we identify and discuss the multitude of response modalities that have been developed, including temperature, pH, chemical, light, electro, and shear-sensitive hydrogels. We discuss the theoretical analysis of hydrogel properties and the mechanisms used to create these responses, highlighting both the pioneering and most recent work in all of these fields. Finally, we review the many current and proposed applications of these hydrogels in medicine and industry.

Electrochemical sensors of octylphenol based on molecularly imprinted poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxythiophene–gold nanoparticles)

Two molecularly imprinted electrochemical sensors are fabricated by using EDOT and EDOT–AuNPs as monomers, respectively. The sensors show good analytical performance for OP sensing. Note: graphene nanoribbons (GNRs), 3,4-ethylenedioxythiophene (EDOT), 4-tert-octyl-phenol (OP).

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Molecularly Imprinted Nanomaterials for Sensor Applications

Molecular imprinting is a well-established technology to mimic antibody-antigen interaction in a synthetic platform. Molecularly imprinted polymers and nanomaterials usually possess outstanding recognition capabilities. Imprinted nanostructured materials are characterized by their small sizes, large reactive surface area and, most importantly, with rapid and specific analysis of analytes due to the formation of template driven recognition cavities within the matrix. The excellent recognition and selectivity offered by this class of materials towards a target analyte have found applications in many areas, such as separation science, analysis of organic pollutants in water, environmental analysis of trace gases, chemical or biological sensors, biochemical assays, fabricating artificial receptors, nanotechnology, etc. We present here a concise overview and recent developments in nanostructured imprinted materials with respect to various sensor systems, e.g., electrochemical, optical and mass sensitive, etc. Finally, in light of recent studies, we conclude the article with future perspectives and foreseen applications of imprinted nanomaterials in chemical sensors.

Electrochemically synthesized polymers in molecular imprinting for chemical sensing

This critical review describes a class of polymers prepared by electrochemical polymerization that employs the concept of molecular imprinting for chemical sensing. The principal focus is on both conducting and nonconducting polymers prepared by electropolymerization of electroactive functional monomers, such as pristine and derivatized pyrrole, aminophenylboronic acid, thiophene, porphyrin, aniline, phenylenediamine, phenol, and thiophenol. A critical evaluation of the literature on electrosynthesized molecularly imprinted polymers (MIPs) applied as recognition elements of chemical sensors is presented. The aim of this review is to highlight recent achievements in analytical applications of these MIPs, including present strategies of determination of different analytes as well as identification and solutions for problems encountered.