Enhanced electrochemical response in oxidative differential pulse voltammetry of dopamine in the presence of ascorbic acid at carboxyl-terminated boron-doped diamond electrodes

Electrochemical detection of triamterene in human urine using boron-doped diamond electrodes

Urine is one of the most used biological fluids for screening drug delivery and the resultant metabolites. In sports, the use of diuretics such as triamterene is considered a violation of anti-doping rules and is stipulated to be present at less than 79 nM in urine by the World Anti-Doping Agency (WADA). It is therefore important to develop effective rapid and low-cost tests for this diuretic. Here we apply electrochemical analysis using boron-doped diamond (BDD) electrodes, which have superior properties such as low background current, a wide potential window, and high resistance to deactivation. Since real urine samples show clear oxidation current peaks in the potential range more positive than 0.5 V (vs. Ag/AgCl) due to the presence of bio-components such as protein, uric acid, and ascorbic acid, to detect triamterene effectively, the electrochemical protocol was optimized towards a potential range where the other components have limited effect. Our results show that reduced triamterene exhibits an oxidation peak at 0.1 V (vs. Ag/AgCl) in 0.1 M phosphate buffer (PB) and at 0.2 V (vs. Ag/AgCl) in pooled human urine. The peak current value increased according to the triamterene concentration. The limit of detection (LOD) was 3.15 nM in the PB and 7.80 nM in pooled human urine. Finally, triamterene detection was attempted in individual urine samples. Triamterene was electrochemically detectable in individual urine samples, excluding urine samples containing an excess amount of ascorbic acid. The limit of detection (LOD) in individual urine samples was determined to be 20.8 nM.

Ti3C2Tx (MXene)/Pt nanoparticle electrode for the accurate detection of DA coexisting with AA and UA

Dopamine (DA), uric acid (UA) and ascorbic acid (AA) are biomolecules widely distributed in the human body and play an important role in many physiological processes. An abnormal concentration of them is associated with various diseases. Thus, the accurate and fast detection of them has been one of the major demands in the healthcare industry. In this study, we demonstrate that Ti₃C₂T_x/PtNP modified glassy carbon electrodes (GCEs) show a good electrochemical performance in the detection of DA and UA. However, there is no response signal to AA for either the CV or DPV curve due to the electrostatic repulsion between the negatively charged electrode surface and the negatively charged AA. Ti₃C₂T_x(MXene)/Pt nanoparticles (PtNPs) are prepared by etching Ti₃AlC₂(MAX) with HF and reducing H₂PtCl₆ with a NaBH₄ aqueous solution. The morphology of Ti₃C₂T_x/PtNPs is multilayered accordion-like Ti₃C₂T_x decorated with PtNPs with a diameter of 10-20 nm. Furthermore, it is found that the electrochemical detection of DA will be enhanced by AA. The electrochemical detection rule of AA enhanced DA can be expressed as follows: I_(DA+AA) = 0.011216C_AA + 0.039950C_DA + 1.1175(I_(DA+AA) is the peak current of DA coexisting with AA. C_AA is the concentration of AA. C_DA is the concentration of DA). This can be used as a calibration to correct the concentration of DA when AA and DA coexist. Notably, AA promotes the stability of the electrode because it cleans the oxidation products from the electrode surface in time. In addition, the sensor exhibits good reproducibility and satisfactory recovery results in a real sample.

Conductive diamond: synthesis, properties, and electrochemical applications

This review summarizes systematically the growth, properties, and electrochemical applications of conductive diamond.

Ultrasensitive and Highly Selective Electrochemical Detection of Dopamine Using Poly(ionic liquids)-Cobalt Polyoxometalate/CNT Composite

A novel sandwich polyoxometalate (POM) Na₁₂[WCo₃(H₂O)₂(CoW₉O₃₄)₂] and poly(vinylimidazolium) cation [PVIM⁺] in combination with nitrogen-doped carbon nanotubes (NCNTs) was developed for a highly selective and ultrasensitive detection of dopamine. Conductively efficient heterogenization of Co₅POM catalyst by PVIM over NCNTs provides the synergy between PVIM-POM catalyst and NCNTs as a conductive support which enhances the electron transport at the electrode/electrolyte interface and eliminates the interference of ascorbic acid (AA) at physiological pH (7.4). The novel PVIM-Co₅POM/NCNT composite demonstrates a superior selectivity and sensitivity with a lowest detection limit of 500 pM (0.0005 μM) and a wide linear detection range of 0.0005-600 μM even in the presence of higher concentration of AA (500 μM).

A sensitive and disposable electrochemical immunosensor for detection of SOX2, a biomarker of cancer

A novel, sensitive, disposable indium tin oxide (ITO)-based electrochemical immunosensor was developed firstly for simple, rapid determination of Sex-determining region Y-box 2 (SOX2). SOX2 is a cancer biomarker and used for detecting small cell lung cancer, lung adenocarcinoma, squamous cell carcinoma, skin cancer, prostate cancer, and breast cancer. In this study, a disposable ITO thin film based electrode was used as working electrode for biosensing the interaction between SOX2 antigen and anti-SOX2 antibody. In this study, carboxyethylsilanetriol (CTES) was also utilized for electrode modifying so as to obtain self-assembled monolayers. The formed self-assembled monolayers were activated with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) chemistry and they were used as a heterobifunctional crosslinker and activator, respectively. Anti-SOX2 antibody was used as a biorecognition molecule and was covalently immobilized onto the ITO thin film modified with CTES. Immobilization steps were characterized by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The optimum immobilization conditions such as antibody concentration, antibody and antigen incubation times were examined for the best sensitivity of the immunosensor. Under optimal conditions, this immunosensor had a wide linear detection range (25fg/mL-2pg/mL) with a detection limit as low as 7fg/mL SOX2. Furthermore, the developed SOX2 immunosensor had good storage stability (79.36% of initial activity after 9 weeks), repeatability (3.88% of RSD) and reproducibility (4.25% of RSD). Our developed immunosensor has an acceptable performance for detection of SOX2 antigen, exhibits low detection limit, and has selective and reproducible results in immunoreaction analysis.

Novel Modifications to Carbon-Based Electrodes to Improve the Electrochemical Detection of Dopamine

In this work, we describe three simple modifications to carbon electrodes that were found to improve the detection of an exemplar neurotransmitter (dopamine) in the presence of physiological interferents (ascorbic acid and/or uric acid). First, the electro-oxidation of ascorbic acid, as a pretreatment, at boron-doped diamond electrode (BDE) interfaces is studied. This treatment did suppress the detection of ascorbic acid oxidation signal, but only in a manner suitable for single-use detection of high concentrations of dopamine (i.e., > 1 μM). Second, the hydrogenation of BDE by electrochemical cathodic treatment and plasma hydrogenation was investigated. Large cathodic, applied potentials (i.e., > - 5 V) and hydrogen plasma pretreatment of BDE lead to the partial and complete oxidization of ascorbic acid before dopamine, respectively. The consequence at hydrogen-plasma treated BDE is the complete electrochemical separation of these two species without any typical catalytic reactions between the analytes. Third, the modification of glassy carbon electrodes with carbon black nanoparticles is explored. This modification enables the simultaneous detection of ascorbic acid, dopamine and uric acid, significantly enhancing the sensitivity of dopamine. Dopamine was best detected using the unconventional route of detecting 5,6-dihydroxyindole, which is made possible by use of carbon-black nanoparticles. The potential of all three studied modifications to be of electroanalytical use is highlighted throughout this work.

Evidence of Carboxyl Modification of Hydrogen-Free Diamond-Like Carbon Films Assisted by Radio Frequency Plasma in Vacuum

Modification of hydrogen-free diamond-like carbon (DLC) is presented, with acrylic acid (AA) vapor carried into a vacuum chamber by argon and with the in situ assistance of low-power radio frequency (RF) plasma at a temperature below 100°C. Measured by atomic force microscopy (AFM) technique, the roughness (Ra) of the DLC was 1.063±0.040 nm. XPS and FT-IR spectra analysis showed that carboxyl groups were immobilized on the surface of the DLC films, with about 40% of carboxyl group area coverage. It was found that the RF plasma and reaction time are important in enhancing the modification rate and efficiency.

Electrochemical Biosensor Based on Boron-Doped Diamond Electrodes with Modified Surfaces

Boron-doped diamond (BDD) thin films, as one kind of electrode materials, are superior to conventional carbon-based materials including carbon paste, porous carbon, glassy carbon (GC), carbon nanotubes in terms of high stability, wide potential window, low background current, and good biocompatibility. Electrochemical biosensor based on BDD electrodes have attracted extensive interests due to the superior properties of BDD electrodes and the merits of biosensors, such as specificity, sensitivity, and fast response. Electrochemical reactions perform at the interface between electrolyte solutions and the electrodes surfaces, so the surface structures and properties of the BDD electrodes are important for electrochemical detection. In this paper, the recent advances of BDD electrodes with different surfaces including nanostructured surface and chemically modified surface, for the construction of various electrochemical biosensors, were described.