Copper (hydr)oxide modified copper electrode for electrocatalytic oxidation of hydrazine in alkaline media

Surface Extraction Process During Initial Oxidation of Pt(111): Effect of Hydrophilic/Hydrophobic Cations in Alkaline Media

The surface oxidation states of the metal electrodes affect the activity, selectivity, and stability of the electrocatalysts. Oxide formation and reduction on such electrodes must be comprehensively understood to achieve next-generation electrocatalysts with outstanding performance and stability. Herein, the initial electrochemical oxidation of Pt(111) in alkaline media containing hydrophilic and hydrophobic cations is investigated by X-ray crystal truncation rod (CTR) scattering, infrared (IR) spectroscopy, and nanoparticle-based surface-enhanced Raman spectroscopy (SERS). Structural determination using X-ray CTR revealed surface buckling and Pt extraction at the initial stage of surface oxidation, depending on the cationic species. Vibrational spectroscopy is performed to identify the potential- and cation-dependent formation of three oxide species (IR-active OHad, Raman-active OHad/Oad(H2O), and Raman-active Oad). Hydrophilic alkali metal cations (Li+) inhibit surface roughening via irreversible oxide formation. Hydrophilic Li+ can strongly stabilize IR-active OHad, hindering the extraction of Pt surface atoms. Interestingly, bulky hydrophobic cations such as tetramethylammonium (TMA+) cation also reduce the extent of irreversible oxidation despite the absence of IR-active OHad. Hydrophobic TMA+ inhibits the formation of Raman-active OHad/Oad(H2O) associated with Pt extraction. In contrast, the moderate hydrophilicity of K+ has no protective effect against irreversible oxidation. Moderate hydrophilicity enables the coadsorption of Raman-active OHad/Oad(H2O) and Raman-active Oad. The electrostatic repulsion between Raman-active OHad/Oad(H2O) and neighboring Raman-active Oad promotes Pt extraction. These results provide insights into controlling the surface structures of electrocatalysts using cationic species during the oxide formation and reduction processes.

Hydrazine High-Performance Oxidation and Sensing Using a Copper Oxide Nanosheet Electrocatalyst Prepared via a Foam-Surfactant Dual Template

This work demonstrates hydrazine electro-oxidation and sensing using an ultrathin copper oxide nanosheet (CuO-NS) architecture prepared via a versatile foam-surfactant dual template (FSDT) approach. CuO-NS was synthesised by chemical deposition of the hexagonal surfactant Brij®58 liquid crystal template containing dissolved copper ions using hydrogen foam that was concurrently generated by a sodium borohydride reducing agent. The physical characterisations of the CuO-NS showed the formation of a two-dimensional (2D) ultrathin nanosheet architecture of crystalline CuO with a specific surface area of ~39 m2/g. The electrochemical CuO-NS oxidation and sensing performance for hydrazine oxidation revealed that the CuO nanosheets had a superior oxidation performance compared with bare-CuO, and the reported state-of-the-art catalysts had a high hydrazine sensitivity of 1.47 mA/cm2 mM, a low detection limit of 15 μM (S/N = 3), and a linear concentration range of up to 45 mM. Moreover, CuO-NS shows considerable potential for the practical use of hydrazine detection in tap and bottled water samples with a good recovery achieved. Furthermore, the foam-surfactant dual template (FSDT) one-pot synthesis approach could be used to produce a wide range of nanomaterials with various compositions and nanoarchitectures at ambient conditions for boosting the electrochemical catalytic reactions.

Cobalt-modified palladium nanocatalyst on nitrogen-doped reduced graphene oxide for direct hydrazine fuel cell

Nitrogen-doped reduced graphene oxide-supported palladium-cobalt nanoparticles (PdCo NPs/NrGO NSs) are synthesized and used as a high-performance and low-cost anodic catalyst for direct hydrazine-hydrogen peroxide fuel cells. The SEM and TEM images of PdCo NPs/NrGO NSs show the uniform metal nanoparticle distribution on the NrGO NSs. The reduction of the oxygen functional groups and the doping of the nitrogen atoms in the GO framework are confirmed by FT-IR and XRD spectroscopic studies. The Pd catalysts modified by Co exhibit a higher catalytic activity, lower onset potential, better durability, and lower impedance values than unmodified Pd catalysts for the electro-oxidation of hydrazine. The kinetic studies show a first-order reaction with an activation energy of 12.51 kJ mol-1. A direct hydrazine-hydrogen peroxide fuel cell with PdCo NPs/NrGO NSs as anode and Pt/C as cathode provides an open circuit voltage of 1.76 V and a maximum power density of 148.58 mW cm-2 at 60 °C, indicating that the PdCo NPs/NrGO NSs are an economical, high performance and reliable anode catalyst for the direct hydrazine-hydrogen peroxide fuel cell.

Alkaline Anion-Exchange Membrane Fuel Cells: Challenges in Electrocatalysis and Interfacial Charge Transfer

Alkaline anion-exchange membrane (AAEM) fuel cells have attracted significant interest in the past decade, thanks to the recent developments in hydroxide-anion conductive membranes. In this article, we compare the performance of current state of the art AAEM fuel cells to proton-exchange membrane (PEM) fuel cells and elucidate the sources of various overpotentials. While the continued development of highly conductive and thermally stable anion-exchange membranes is unambiguously a principal requirement, we attempt to put the focus on the challenges in electrocatalysis and interfacial charge transfer at an alkaline electrode/electrolyte interface. Specifically, a critical analysis presented here details the (i) fundamental causes for higher overpotential in hydrogen oxidation reaction, (ii) mechanistic aspects of oxygen reduction reaction, (iii) carbonate anion poisoning, (iv) unique challenges arising from the specific adsorption of alkaline ionomer cation-exchange head groups on electrocatalysts surfaces, and (v) the potential of alternative small molecule fuel oxidation. This review and analysis encompasses both the precious and nonprecious group metal based electrocatalysts from the perspective of various interfacial charge-transfer phenomena and reaction mechanisms. Finally, a research roadmap for further improvement in AAEM fuel cell performance is delineated here within the purview of electrocatalysis and interfacial charge transfer.

Citrate-Capped Hybrid Au-TiO2 Nanomaterial for Facile and Enhanced Electrochemical Hydrazine Oxidation

Effective and facile electrochemical oxidation of chemical fuels is pivotal for fuel cell applications. Herein, we report the electrocatalytic oxidation of hydrazine on a citrate-capped Au-TiO₂-modified glassy carbon electrode, which follows two different oxidation paths. These two pathways of hydrazine oxidation are ascribed to occur on Au and the activated TiO₂ surface of the Au-TiO₂ hybrid electrocatalyst. This activation was achieved through molecular capping of the Au-TiO₂ surface by citrate, which leads to favorable hydrazine oxidation with a lower Tafel slope compared to that of the clean surface of the respective materials, that is, Au and TiO₂.

Amorphous PtNiP particle networks of different particle sizes for the electro-oxidation of hydrazine

Amorphous PtNiP particle networks with different particle sizes prepared via the reaction temperature control method showed high catalytic activity for hydrazine oxidation compared to the Pt and PtNi catalysts due to its porous, amorphous structure.

Effective electrocatalysis based on Ag2O nanowire arrays supported on a copper substrate

Silver oxide nanowire arrays (Ag2O NWAs) were first synthesized on a copper (Cu) rod by a simple and facile wet-chemistry approach without using any surfactants. The as-synthesized Ag2O NWA/Cu rod not only can be used as an integrated electrode (called a Ag2O NWA/CRIE) to detect hydrazine (HZ) but also can serve as the catalyst layer for a direct HZ fuel cell. The current density of HZ oxidation on Ag2O NWA (94.4 mA cm(-2)) is much bigger than that on a bare Cu rod (3.9 mA cm(-2)) at -0.6 V, and other Ag2O NWAs have the lowest onset potential (-0.85 V). This suggests that a Ag2O NWA integrated electrode has potential application in catalytic fields that contain the HZ fuel cell.

Hollow CuO nanospheres uniformly anchored on porous Si nanowires: preparation and their potential use as electrochemical sensors

Hollow CuO nanospheres have been prepared via a reduction reaction of copper ions on porous Si nanowires combined with calcination in air and uniformly anchored on their surfaces. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize and analyze as-synthesized samples. The results reveal that Si nanowires fabricated from heavily doped Si wafer are formed with a meso-porous structure by an Ag-assisted etching approach, and Cu nanoparticles are formed and uniformly decorated on the Si nanowires through a reaction of copper ions reduced by silicon. After annealing in air, Cu nanoparticles are in situ oxidized and transformed into CuO, leading to the formation of hollow nanospheres because of the Kirkendall effect. The diameter size of as-prepared CuO hollow spheres anchored on porous Si nanowires is mainly around 30 nm. Finally, in order to illuminate the advantages of this novel hybrid nanostructure of nanosized hollow spheres supported on porous nanowires, its electrochemical sensing performance to hydrazine as an example has been further investigated. The results confirm that it is a good potential application to detect hydrazine.

Nanotextured metal copper substrates as powerful and long-lasting fuel cell anodes

Fuel cells (FCs) are promising electrochemical devices that convert chemical energy of fuels directly into electrical energy. We present a new anode material based on nanotextured metal copper for fuel cell applications. We have demonstrated that low-cost copper catalyst anodes act as highly efficient and ultra-long-lasting materials for the direct electro-oxidation of ammonia-borane and additional amine derivatives. High power densities of ca. 1W·cm(-2) (ca. -1 V vs Ag/AgCl at 1 A) are readily achieved at room temperature. We fabricate fuel cell devices based on our nanotextured Cu anodes in combination with commercial air cathodes.