Enhanced electrical and electrochemical properties of PMMA–clay nanocomposite gel polymer electrolytes

MoS2 nanoflower decorated bio-derived chitosan nanocomposites for sustainable energy storage: Structural, optical and electrochemical studies

Bio-derived chitosan-molybdenum di sulfide (Cs-MoS2) nanocomposites are prepared by a simple and economical aqueous casting method with varying concentrations of MoS2. The structural, surface morphological, optical, and electrochemical properties of the nanocomposites were studied. FTIR analysis reveals the strong interaction between Cs and MoS2. FESEM micrograph showed an increment of the surface roughness due to the incorporation of MoS2 layers into Cs. The surface wettability of the nanocomposites was found to be decreased from 73° to 33° due to the incorporation of MoS2 into the chitosan. UV-vis spectroscopy study demonstrates a reduction of optical bandgap from 4.29 to 3.44 eV as the nanofiller, MoS2, introduces localized states within the forbidden energy bandgap. The incorporation of MoS2 was found to increase the specific capacitance of Cs from 421 mFg-1 to 1589 mFg-1 at a current density of 100 μAg-1. The EIS analysis revealed an increase in the pseudo-capacitance from 0.09 μF to 4.13 μF and a reduction of charge transfer resistance that comes from the nanofiller contribution. MoS2 nanoflower introduces more active sites and expands the electroactive zone, thus improving the charge storage property of Cs. The Cs-MoS2 may offer a new route for the synthesis of eco-friendly, biodegradable, and electrical storage devices.

Recent developments in natural mineral-based separators for lithium-ion batteries

Lithium-ion batteries (LIBs) are currently the most widely used portable energy storage devices due to their high energy density and long lifespan. The separator plays a key role in the battery, and its function is to prevent the two electrodes of the battery from contacting, causing the internal short circuit of the battery, and ensuring the lithium ions transportation. Currently, lithium ion battery separators widely used commercially are polyolefin separators, such as polyethylene (PE) and polypropylene (PP) based separators. However, polyolefin separators would shrink at high temperatures, causing battery safety issues, and also causing white pollution. To solve these issues, the use of natural minerals to prepare composite separators for LIBs has attracted widespread attention owing to their unique nano-porous structure, excellent thermal and mechanical stability and being environmentally friendly and low cost. In this review, we present recent application progress of natural minerals in separators for LIBs, including halloysite nanotubes, attapulgite, sepiolite, montmorillonite, zeolite and diatomite. Here, we also have a brief introduction to the basic requirements and properties of the separators in LIBs. Finally, a brief summary of recent developments in natural minerals in the separators is also discussed.

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

This study aims to prepare an organic-inorganic reticular polymer electrolyte. Isocyanate acts as a bridge that connects fumed silica and PEO molecular chains. The PEO-TDI-SiO₂ solid polymer electrolytes developed can significantly have improved ionic conductivity of 0.12 mS cm^-1 at ambient temperature. This is because the TDI-SiO₂ nanoparticles inhibits polymer crystallization which provides more continuous Li-ion transport pathways. Tests at 60 °C indicate that the cross-linked structure of covalent TSI bonded to PEO effectively enlarges the electrochemical window of the polymer electrolyte to 5.6 V. Also, the PTSI electrolyte membrane has a higher Li⁺ transference number of 0.33 compared to the PEO-LiTFSI electrolytes. It is worth noting that the assembled LiFePO₄|PTSI8%|Li cells deliver outstanding rate performance and stable cycling performance. All these considerable merits of PTSI membrane demonstrate that PTSI is a promising candidate that can be used as solid polymer electrolytes for the next-generation Li-ion batteries.

Characteristics of Dye-Sensitized Solar Cell Assembled from Modified Chitosan-Based Gel Polymer Electrolytes Incorporated with Potassium Iodide

In the present work, phthaloyl chitosan (PhCh)-based gel polymer electrolytes (GPEs) were prepared using dimethylformamide (DMF) as a solvent, ethyl carbonate (EC) as a co-solvent, and a set of five quaternaries of potassium iodide (KI) as a doping salt, which is a mixed composition of iodine (I₂). The prepared GPEs were applied to dye-sensitized solar cells (DSSC) to observe the effectiveness of the electrolyte, using mesoporous TiO₂, which was sensitized with N3 dye as the sensitizer. The incorporation of the potassium iodide-based redox couple in a polymer electrolyte is fabricated for dye-sensitized solar cells (DSSCs). The number of compositions was based on the chemical equation, which is 1:1 for KI:I₂. The electrical performance of prepared GPE systems have been assessed using electrical impedance spectroscopy (EIS), and dielectric permittivity. The improvement in the ionic conductivity of PhCh-based GPE was observed with the rise of salt concentration, and the maximum ionic conductivity (4.94 × 10⁻² S cm⁻¹) was achieved for the 0.0012 mol of KI:I₂. The study of dielectric permittivity displays that ions with a high dielectric constant are associated with a high concentration of added ions. Furthermore, the gel polymer electrolyte samples were applied to DSSCs to detect the conversion effectiveness of the electrolytes. For electrolytes containing various content of KI:I₂ the highest conversion efficiency (η%) of DSSC obtained was 3.57% with a short circuit current density (Jsc) of 20.33 mA cm⁻², open-circuit voltage (Voc) of 0.37 V, fill factor (FF) of 0.47, as well as a conductivity of 2.08 × 10⁻² S cm⁻¹.

The Effect of Different Mixed Organic Solvents on the Properties of p(OPal-MMA) Gel Electrolyte Membrane for Lithium Ion Batteries

A solvent is a key factor during polymer membrane preparation, and it is directly related to application performance as a separator for lithium ion battery (LIB). In this study, different mixed solvents were employed to prepare polymer (p(OPal-MMA)) membranes by the phase inversion technique. The polymer membrane then absorbed liquid electrolytes to obtain gel electrolytes (GPEs). The surface morphologies and porosities of these membranes were investigated, and lithium ion transferences and electrochemical performances of these GPEs were also measured. The membrane displayed an interconnected three-dimensional framework structure with uniformly distributed pores when using DMF as a porogen. When combined with acetone as the component solvent, the prepared GPE displayed the largest lithium ion transference number (0.706), the highest porosity (42.6%) and ion conductivity (3.99 × 10−3 S/cm). Even when assembled as Li/GPE/LiFePO4 cell, it exhibited the highest initial specific capacity of 167 mAh/g and retained most capacity (162 mAh/g) after 50 cycles. The results presented here probably provide reference for choosing an appropriate mixed solvent in fabricating polymer membranes.

High Performance Poly(vinyl alcohol)-Based Li-Ion Conducting Gel Polymer Electrolyte Films for Electric Double-Layer Capacitors

With 1-methyl-2-pyrrolidinone (NMP) as the solvent, the biodegradable gel polymer electrolyte films are prepared based on poly(vinyl alcohol) (PVA), lithium bis(trifluoromethane)sulfonimide (LiTFSI), and 1-ethyl-3 methylimidazoliumbis(trifluoromethylsulfonyl)imide (EMITFSI) by means of solution casting. The films are characterized to evaluate their structural and electrochemical performance. The 60PVA-40LiTFSI + 10 wt.% EMITFSI system exhibits excellent mechanical properties and a high ionic transference number (0.995), indicating primary ionic conduction in the film. In addition, because of the flexibility of polymer chain segments, its relaxation time is as low as 5.30 × 10-7 s. Accordingly, a high ionic conductivity (3.6 × 10-3 S cm-1) and a wide electrochemical stability window (~5 V) are obtained. The electric double-layer capacitor (EDLC) based on this electrolyte system shows a specific capacitance of 101 F g-1 and an energy density of 10.3 W h kg-1, even after 1000 charge-discharge cycles at a current density of 0.4 A g-1 under a charging voltage of 2 V. All these excellent properties imply that the NMP-soluble 60PVA-40LiTFSI + 10 wt.% EMITFSI gel polymer electrolyte could be a promising electrolyte candidate for electrochemical device applications.

Enhanced Electrochemical Properties of Gel Polymer Electrolyte with Hybrid Copolymer of Organic Palygorskite and Methyl Methacrylate

Gel polymer electrolyte (GPE) is widely considered as a promising safe lithium-ion battery material compared to conventional organic liquid electrolyte, which is linked to a greater risk of corrosive liquid leakage, spontaneous combustion, and explosion. GPE contains polymers, lithium salts, and liquid electrolyte, and inorganic nanoparticles are often used as fillers to improve electrochemical performance. However, such composite polymer electrolytes are usually prepared by means of blending, which can impact on the compatibility between the polymer and filler. In this study, the hybrid copolymer poly (organic palygorskite-co-methyl methacrylate) (poly(OPal-MMA)) is synthesized using organic palygorskite (OPal) and MMA as raw materials. The poly(OPal-MMA) gel electrolyte exhibits an ionic conductivity of 2.94 × 10⁻³ S/cm at 30 °C. The Li/poly(OPal-MMA) electrolyte/LiFePO₄ cell shows a wide electrochemical window (approximately 4.7 V), high discharge capacity (146.36 mAh/g), and a low capacity-decay rate (0.02%/cycle).

Ionic Conductivity and Cycling Stability Improvement of PVDF/Nano-Clay Using PVP as Polymer Electrolyte Membranes for LiFePO₄ Batteries

In this paper, we present the characteristics and performance of polymer electrolyte membranes (PEMs) based on poly(vinylidene fluoride) (PVDF). The membranes were prepared via a phase-inversion method (non-solvent-induced phase separation (NIPS)). As separators for lithium battery systems, additive modified montmorillonite (MMT) nano-clay served as a filler and poly(vinylpyrrolidone) (PVP) was used as a pore-forming agent. The membranes modified with an additive (8 wt % nano-clay and 7 wt % PVP) showed an increased porosity (87%) and an uptake of a large amount of electrolyte (801.69%), which generated a high level of ionic conductivity (5.61 mS cm⁻¹) at room temperature. A graphite/PEMs/LiFePO₄ coin cell CR2032 showed excellent stability in cycling performance (average discharge capacity 127 mA h g⁻¹). Based on these results, PEMs are promising materials to be used in Polymer Electrolyte Membranes in lithium-ion batteries.

Ambient-Air Stable Lithiated Anode for Rechargeable Li-Ion Batteries with High Energy Density

An important requirement of battery anodes is the processing step involving the formation of the solid electrolyte interphase (SEI) in the initial cycle, which consumes a significant portion of active lithium ions. This step is more critical in nanostructured anodes with high specific capacity, such as Si and Sn, due to their high surface area and large volume change. Prelithiation presents a viable approach to address such loss. However, the stability of prelithiation reagents is a big issue due to their low potential and high chemical reactivity toward O₂ and moisture. Very limited amount of prelithiation agents survive in ambient air. In this research, we describe the development of a trilayer structure of active material/polymer/lithium anode, which is stable in ambient air (10-30% relative humidity) for a period that is sufficient to manufacture anode materials. The polymer layer protects lithium against O₂ and moisture, and it is stable in coating active materials. The polymer layer is gradually dissolved in the battery electrolyte, and active materials contact with lithium to form lithiated anode. This trilayer-structure not only renders electrodes stable in ambient air but also leads to uniform lithiation. Moreover, the degree of prelithiation could vary from compensating SEI to fully lithiated anode. With this strategy, we have achieved high initial Coulombic efficiency of 99.7% in graphite anodes, and over 100% in silicon nanoparticles anodes. The cycling performance of lithiated anodes is comparable or better than those not lithiated. We also demonstrate a Li₄Ti₅O₁₂/lithiated graphite cell with stable cycling performance. The trilayer structure represents a new prelithiation method to enhance performance of Li-ion batteries.

A gel polymer electrolyte based on a novel synthesized matrix of a self-doped polymer of h-poly(methyl methacrylate-vinyl trismethoxy silane)

The monomers of methyl methacrylate and vinyl trismethoxy silane were chosen to synthesize the novel self-doped polymer of (h-P(MMA-VTMS)), and then the obtained polymer was used as matrix to prepare GPE.

Polyhedral oligomeric silsesquioxane containing gel polymer electrolyte based on a PMMA matrix

A polyhedral oligomeric silsesquioxane (POSS) nano-cage can endow gel polymer electrolyte (GPE) with similar properties as can be accomplished with other inorganic nanoparticles; the organic substituents at the cage corners of POSS are more compatible with GPEs.

Bone cement based nanohybrid as a super biomaterial for bone healing

A novel nanohybrid based on bone cement has been developed which is capable of healing fractured bone in 30 days, one-third of the time required for the natural healing process. Nanohybrids of bone cement based on poly(methyl methacrylate) (PMMA), currently used as a grouting material in joint replacement surgery, were prepared by simple mixing with organically modified layered silicates of varying chemical compositions. The temperature arising from exothermic polymerization in one of the nanohybrids is 12 °C lower than that in pure bone cement, thus circumventing the reported cell necrosis that occurs during implantation with pure bone cement. The thermal stability and mechanical superiority of this nanohybrid were verified in terms of its higher degradation temperature, better stiffness, superior toughness, and significantly higher fatigue resistance compared with pure bone cement; these properties make it appropriate for use as an implant material. The biocompatibility and bioactivity of the nanohybrid were confirmed using cell adhesion, cell viability, and fluorescence imaging studies. Osteoconductivity and bone bonding properties were monitored in vivo in rabbits through radiographic imaging and histopathological studies of growing bone and muscle near the surgery site. The observed dissimilarity of the properties of two different nanoclays used as fillers were visualized through interactions measured using spectroscopic techniques. Studies of the influence of different elements on bioactivity showed a higher efficiency for the nanoclay containing greater amounts of iron.

Making a better organic–inorganic composite electrolyte to enhance the cycle life of lithium–sulfur batteries

The development of a high performance Li–S battery based on a composite gel polymer electrolyte with unique density gradients of silica nanoparticles.

Local Li coordination and ionic transport in methacrylate-based gel polymer electrolytes

The local Li cation coordination motifs and the interactions between the hosting methacrylate-based polymer membrane and the liquid electrolyte [1 M LiPF6 in ethylene carbonate (EC)/dimethyl carbonate (DMC)] are studied by employing liquid and solid-state NMR spectroscopy. At low temperatures, two different coordination modes for Li cations are identified with the help of dipolar-based solid-state NMR techniques, one of which is the exclusive coordination by DMC molecules, while the other is a co-coordination by the polymer and DMC molecules. At room temperature, Li cations are found to be extremely mobile, coordinated by EC and DMC molecules as well as the copolymer, as found by liquid-state NMR spectroscopy.

Synergistic gelation of silica nanoparticles and a sorbitol-based molecular gelator to yield highly-conductive free-standing gel electrolytes

Lithium-ion batteries have emerged as the preferred type of rechargeable batteries, but there is a need to improve the performance of the electrolytes therein. Specifically, the challenge is to obtain electrolytes with the mechanical rigidity of solids but with liquid-like conductivities. In this study, we report a class of nanostructured gels that are able to offer this unique combination of properties. The gels are prepared by utilizing the synergistic interactions between a molecular gelator, 1,3:2,4-di-O-methyl-benzylidene-d-sorbitol (MDBS), and a nanoscale particulate material, fumed silica (FS). When MDBS and FS are combined in a liquid consisting of propylene carbonate with dissolved lithium perchlorate salt, the liquid electrolyte is converted into a free-standing gel due to the formation of a strong MDBS-FS network. The gels exhibit elastic shear moduli around 1000 kPa and yield stresses around 11 kPa-both values considerably exceed those obtainable by MDBS or FS alone in the same liquid. At the same time, the gel also exhibits electrochemical properties comparable to the parent liquid, including a high ionic conductivity (~5 × 10(-3) S/cm at room temperature) and a wide electrochemical stability window (up to 4.5 V).