A comparison of the electrochemical recovery of palladium using a parallel flat plate flow-by reactor and a rotating cylinder electrode reactor

Electrochemical Metal Recycling: Recovery of Palladium from Solution and In Situ Fabrication of Palladium-Carbon Catalysts via Impact Electrochemistry

Recycling of critical materials, regeneration of waste, and responsible catalyst manufacture have been repeatedly documented as essential for a sustainable future with respect to the environment and energy production. Electrochemical methods have become increasingly recognized as capable of achieving these goals, and “impact” electrochemistry, with the advantages associated with dynamic nanoelectrodes, has recently emerged as a prime candidate for the recovery of metals from solution. In this report, the nanoimpact technique is used to generate carbon-supported palladium catalysts from low-concentration palladium(II) chloride solutions (i.e., a waste stream mimic) as a proof of concept. Subsequently, the catalytic properties of this material in both synthesis (Suzuki coupling reaction) and electrocatalysis (hydrogen evolution) are demonstrated. Transient reductive impact signals are shown and analyzed at potentials negative of +0.4 V (vs SCE) corresponding to the onset of palladium deposition in traditional voltammetry. Direct evidence of Pd modification was obtained through characterization by environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, transmission electron microscopy, and thermogravimetric analysis of impacted particles. This showed the formation of deposits of Pd0 partially covering the 50 nm carbon black particles with approximately 14% Pd (wt %) under the conditions used. This material was then used to demonstrate the conversion of iodobenzene into its biphenyl product (confirmed through nuclear magnetic resonance) and the successful production of hydrogen as an electrocatalyst under acidic conditions (under cyclic voltammetry).

2,6-Diamino-1-N-methylpyrimidine as new fluorescent probe for palladium(II) determination using hyphenated technique

The selective and sensitive hyphenated technique for Pd(II) fluorescence and spectrophotometric determination was proposed. The procedure was based on preliminary solid-phase extraction of [PdCl4]2− onto silica modified with quaternary ammonium salts, with the subsequent elution from the surface by 2,6-diamino-1- N-methylpyrimidine solution and measurement of the fluorescence intensity. The luminescence enhancement effect of 2,6-diamino-1- N-methylpyrimidine in the presence of Pd(II) due to the complex formation was applied to the development of sorption-spectroscopic techniques for detecting trace amounts of palladium in solution.

Recent trends in removal and recovery of heavy metals from wastewater by electrochemical technologies

Heavy metal-laden water and wastewater pose a threat to biodiversity, including human health. Contaminated wastewater can be treated with several separation and purification methods. Among them, electrochemical treatment is a notable clean technology, versatile and environmentally compatible for the removal and recovery of inorganic pollutants from water and wastewater. Electrochemical technology provides solution for the recovery of metals in their most valuable state. This paper analyses the most recent electrochemical approaches for the removal and recovery of metal ions. Various current works involving cell design and electrode development were addressed in distinguished electrochemical processes, namely, electrodeposition, electrocoagulation, electroflotation, and electrosorption. Cathodic reduction of metal ions has been proven in result to metal deposit on the metal, metal oxide, stainless steel, and graphite electrode. However, little progress has been made toward electrode modification, particularly the cathode for the purpose of cathodic reduction and deposition. Meanwhile, emerging advanced materials, such as ionic liquids, have been presented to be prominent to the technological advancement of electrode modifications. It has been projected that by integrating different priorities into the design approach for electrochemical reactors and recent electrode developments, several insights can be obtained that will contribute toward the enhancement of the electrochemical process performance for the effective removal and recovery of heavy metals from water and wastewater in the near future.

Degradation of paracetamol by advance oxidation processes using modified reticulated vitreous carbon electrodes with TiO(2) and CuO/TiO(2)/Al(2)O(3)

The degradation of paracetamol in aqueous solutions in the presence of hydrogen peroxide was carried out by photochemistry, electrolysis and photoelectrolysis using modified 100 pores per inch reticulated vitreous carbon electrodes. The electrodes were coated with catalysts such as TiO(2) and CuO/TiO(2)/Al(2)O(3) by electrophoresis followed by heat treatment. The results of the electrolysis with bare reticulated vitreous carbon electrodes show that 90% paracetamol degradation occurs in 4 h at 1.3 V vs. SCE, forming intermediates such as benzoquinone and carboxylic acids followed by their complete mineralisation. When the electrolysis was carried out with the modified electrodes such as TiO(2)/RVC, 90% degradation was achieved in 2 h while with CuO/TiO(2)/Al(2)O(3)/RVC, 98% degradation took only 1 h. The degradation was also carried out in the presence of UV reaching 95% degradation with TiO(2)/RVC/UV and 99% with CuO/TiO(2)/Al(2)O(3)/RVC/UV in 1 h. The reactions were followed by spectroscopy UV-Vis, HPLC and total organic carbon analysis. These studies show that the degradation of paracetamol follows a pseudo-first order reaction kinetics.