A highly sensitive ascorbic acid sensor using a Ni–Pt electrode

Nanozyme-Catalyzed Colorimetric Detection of the Total Antioxidant Capacity in Body Fluids by Paper-Based Microfluidic Chips

Total antioxidants play a crucial role in human health, and detection of the total antioxidant capacity (TAC) has broad application prospects in fields such as food safety, environmental assessment, and disease diagnosis. However, a long detection time, cumbersome steps, high cost, reliance on professional equipment, and nonportability still remain significant challenges. In this work, an efficient strategy of point-of-care testing (POCT) of the TAC in body fluids by nanozyme-catalyzed colorimetric paper-based microfluidic sensors is proposed. The paper-based microfluidic sensors coupled with a smartphone can reduce testing costs and provide portability. The nanozyme prepared by the solvothermal method presents Michaelis constants of 0.11 and 0.129 mM for H2O2 and TMB, respectively. A method for immobilizing nanozymes and chromogenic agents on a paper-based microfluidic chip is established. Based on smartphone photography and image grayscale extraction, the TAC can be qualitatively detected with a detection limit and linear range of 33.4 and 50-700 μM, respectively. Furthermore, the proposed sensor can realize the one-step quantitative analysis of the TAC in body fluids (blood, saliva, and sweat) within 15 min. The proposed nanozyme-catalyzed colorimetric paper-based microfluidic sensors presented in this study exhibit promising application prospects in the fields of biochemical analysis and POCT.

Hierarchical copper-based metal-organic frameworks nanosheet assemblies for electrochemical ascorbic acid sensing

Noninvasive human health monitoring requires the development of efficient electrochemical sensors for the quantitative analysis of infinitesimal biomolecules. In this work, we reported a novel hierarchical nanosheet assemblies (HSA) of copper-based metal-organic frameworks (MOFs) as an electrochemical sensor for ascorbic acid (AA) detection. Copper 1,4-benzenedicarboxylate (CuBDC) HSA was constructed by three steps of in situ growth on stone paper, including hydrolysis, anion exchange, and heteroepitaxy growth. The monodispersed two-dimensional MOFs nanosheet units were aligned in an orderly manner and arranged into three-dimensional hierarchical assemblies. The CuBDC HSA-based AA sensor displayed a high sensitivity of 396.8 μA mM^-1 cm^-2 and a low detection limit of 0.1 μM. Excellent selectivity, stability and reproducibility were also obtained. Benefiting from the advantages of ultrathin nanosheets and nature-inspired hierarchy, this unique architecture facilitated reactant dispersion and maximized the accessible active sites and charge-transport capability and thus had superior catalytic ability for the electro-oxidation of ascorbic acid compared to bulk MOFs. Moreover, the CuBDC HSA sensor performed AA level detection in juice samples with acceptable accuracy and verified the feasibility for sweat AA sensing. This novel MOFs architecture holds great potential as an electrochemical sensor to detect AA for noninvasive human health monitoring in the future.

Hierarchically Porous S/N Codoped Carbon Nanozymes with Enhanced Peroxidase-like Activity for Total Antioxidant Capacity Biosensing

Design of highly active carbon nanozymes and further establishment of ultrasensitive biosensors remain a challenge. Herein, hierarchically porous carbon nanozymes with sulfur (S)/nitrogen (N) codoping (SNC) were developed. Compared with N-doped carbon (NC) nanozymes, SNC nanozymes have a smaller Michaelis-Menten constant and higher specific activities, demonstrating that the S-doping in SNC nanozymes could not only enhance their affinity toward substrates but also improve their catalytic performance. These results may be caused by the synergistic effect of heteroatoms (S and N). Because of the good enzyme-like activity, the proposed SNC nanozymes were exploited to the colorimetric detection of the total antioxidant capacity (TAC) using ascorbic acid as a typical model with a limit of detection of 0.08 mM. Because of its high sensitivity and selectivity and encouraging performance, the detection method presented practical feasibility for the TAC assay in commercial beverages. This work paves a way to design the highly active carbon nanozymes and expand their applications in the construction of high-performance biosensors.

One-step rapid synthesis of Ni6(C12H25S)12 nanoclusters for electrochemical sensing of ascorbic acid

Metal nanoclusters (NCs) are highly desirable as active catalysts due to their highly active surface atoms. Among the reported metal clusters, nickel nanoclusters (Ni NCs) have been less well developed than others, such as gold, silver and copper. Herein a simple method is developed to synthesize atomically precise Ni clusters with the molecular formular of Ni₆(C₁₂H₂₅S)₁₂. Moreover, the single crystal of the Ni₆(C₁₂H₂₅S)₁₂ cluster is also obtained. The composition, morphology and optical properties of the prepared Ni₆ clusters are characterized by X-ray crystallography, XPS, XRD, SEM, HRTEM, FTIR and UV-Vis spectroscopy. The Ni cluster is composed of six nickel atoms that form a hexagonal ring with an exterior 1-dodecanethiol shell, resembling a double crown. Meanwhile, the Ni₆ NCs can be self-assembled into nanosheets due to their uniform size. It was found that the Ni₆(C₁₂H₂₅S)₁₂ clusters loaded on carbon black exhibit higher electrocatalytic activity than Ni nanoparticles towards ascorbic acid (AA) oxidation. The Ni₆ clusters show high sensing performance for AA with a wide linear range (1-3212 μM) and a low detection limit of 0.1 μM (S/N = 3). The significantly enhanced catalytic activity can be ascribed to the high fraction of surface Ni atoms with low coordination in the sub-nanometer clusters. The present work not only provides a straightforward method for synthesizing atomically precise metal clusters but also indicates that ultrasmall Ni clusters can be used as highly efficient catalysts for the electrochemical detection of AA.

Ruthenium oxide modified nickel electrode for ascorbic acid detection

Electrodes of ruthenium oxide modified nickel were prepared by a thermal decomposition method. The stoichiometry of the modifier, RuO_x, was quantitatively determined to be a meta-stable phase, RuO₅. The electrodes were employed to sense ascorbic acid in alkaline solution with a high sensitivity, 296 μAcm^-2 mM^-1, and good selectivity for eight kinds of disturbing reagents. We found that the ascorbic acid was oxidized irreversibly in solution. To match with the variation of the morphology, the sensitivity reached a maximum when the RuO_x segregated with a nano-crystalline feature. We find that the substrate oxidized as the deposited RuO_x grew thicker. The feature of the deposited RuO_x changed from nano-particles to small islands resulting from the wetting effect of the substrate oxide, NiO; meanwhile the sensitivity decreased dramatically. The endurance of the RuO_x/Ni electrode also showed a good performance after 38 days of successive test.

A rapid microwave synthesis of nitrogen-sulfur co-doped carbon nanodots as highly sensitive and selective fluorescence probes for ascorbic acid

A ultrafast one-step microwave-assisted method was developed for the synthesis of nitrogen-sulfur co-doped carbon nanodots (N,S-CDs) by using ethylenediamine as the carbon source and sulfamic acid as the surface passivation reagent. The morphology and the properties of N,S-CDs were explored by a series of techniques, such as high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV-vis absorption and fluorescence spectroscopy. The prepared N,S-CDs exhibit bright blue photoluminescence with a high fluorescence quantum yield (FLQY) up to 28%, and high stability and excellent water solubility. A N,S-CDs-based fluorescent probe was developed for sensitive detection ascorbic acid (AA) in the presence of Cu(2+), based on the mechanism that AA reduces Cu(2+) to Cu(+), then Cu(+) quenches the fluorescence of N,S-CDs through electron or energy transfer due to the interaction between Cu(+) and thiol ligand on the N,S-CDs surface. The observed linear response concentration range was from 0.057 to 4.0μM to AA with a detection limit as low as 18nM. The probe exhibited a highly selective response toward AA even in the presence of possible interfering substances, such as uric acid and citric acid. Moreover, these promising features made the sensing system used for the analysis of human serum and urine samples.

Rapid synthesis of hollow Ni(OH)2 with low-crystallinity for the electrochemical detection of ascorbic acid with high sensitivity

Ni(OH)₂ performed good properties to ascorbic acid detection with the linear range of 10 μM to 0.20 mM, the detection limit of 3 μM (S/N = 3). The sensitivity is 1747.71 μA mM⁻¹ cm⁻², which is due to the hollow Ni(OH)₂ with low crystallinity.

PdPt bimetallic alloy nanowires-based electrochemical sensor for sensitive detection of ascorbic acid

A novel PdPt bimetallic alloy nanowires-based electrochemical sensor for sensitive detection of ascorbic acid with remarkable electrocatalytic activity in a wide linear range (0.01–0.97 mM) and a detection limit as low as 0.2 μM.

A simple all-PEDOT:PSS electrochemical transistor for ascorbic acid sensing

An all-PEDOT:PSS electrochemical transistor was used to detect ascorbic acid, which is an excellent platform for developing chemical sensors.

Electrochemical sensor based on carbon-supported NiCoO2 nanoparticles for selective detection of ascorbic acid

An electrochemical sensor for selective detection of ascorbic acid (AA) in the presence of dopamine (DA) and uric acid (UA) was fabricated by modifying the glassy carbon electrode (GCE) with carbon-supported NiCoO2 (NiCoO2/C) nanoparticles. The electrochemical impedance spectroscopic (EIS) studies reveal the little charge transfer resistance for the modified electrode. The electrocatalytic activity of the modified electrode for the oxidation of AA was investigated. The current sensitivity of AA was enhanced to about five times upon modification. The voltammetric response of AA was well resolved from the responses of DA and UA, and the oxidation potential of AA was negatively shifted to -0.20 V. The biosensor tolerated a wide linear concentration range for AA, from 1.0 × 10(-5)M to 2.63 × 10(-3)M (R(2)=0.9929), with a detection limit of 0.5 μM (S/N = 3). Our results demonstrate that the NiCoO2/C nanomaterials has excellent AA sensing capability, including a fast response time, high reproducibility and stability, with great promise in the quantification of AA in real samples. That makes it a unique electrochemical sensor for the detection of AA which is free from the interference of DA, UA and other interferents.

Electro-oxidation of ascorbic acid by cobalt core-shell nanoparticles on a H-terminated Si(100) and by nanostructured cobalt-coated Si nanowire electrodes

Determination of the concentration of ascorbic acid in a solution has attracted intense recent interest. Here we demonstrate the feasibility of electro-oxidation of ascorbic acid on spherical cobalt core-shell nanoparticles (10-50 nm dia.) prepared by electrochemical deposition on a H-terminated Si(100) substrate. Depth-profiling X-ray photoelectron spectroscopy reveals that these nanoparticles consist of a metallic cobalt core covered by a Co(OH)2 shell without any evidence of CoOx. Glancing-incidence X-ray diffraction studies further show that the metallic Co core consists of a mixture of hexagonal close packed and face centered cubic structures, the relative composition of which can be easily controlled by the deposition potential. We further demonstrate that when these Co nanoparticles are deposited on a high-surface-area electrode as provided by a Si nanowire template, the resulting nanostructured Co-coated Si nanowire electrode offers a promising high-performance sensor platform for ascorbic acid detection.