Coreactants of tris(2,2′-bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence

The ECL enhancement of MBene QDs with nanoparticle-on-mirror structure for sensitive detection of exosomal miRNA

Thyroid cancer is the most prevalent endocrine malignancy. The development of sensitive and reliable methods to detect the thyroid cancer is the currently urgent requirement. Herein, we developed an electrochemiluminescence (ECL) biosensor based on MBene derivative quantum dots (MoB QDs) and Ag NP-on-mirror (NPoM) nanocavity structure. On the one hand, MBene QDs as a novel luminescent material in the ECL process was reported for the first time, which can react with H2O2 as co-reactant. On the other hand, the NPoM nanostructure was successfully constructed with the Ag mirror and Ag NPs to provide highly localized hot spots. The NPoM structure had high degree of light field confinement and electromagnetic field enhancement, which can amplify the ECL signal as the signal modulator. Therefore, the synergistic effect of the nanocavity and localized surface plasmon resonance (LSPR) mode in the NPoM facilitated the enhancement of the ECL signal of MoB QDs over 21.7 times. Subsequently, the proposed ECL biosensing system was employed to analyze the expression level of miRNA-222-3p in the thyroid cancer exosome. The results indicated the relative association between miRNA-222-3p and BRAFV600E mutation. The MoB QDs/NPoM biosensor displayed the ideal potential in assessing thyroid cancer progression for advancing clinical diagnosis applications.

Fabrication of an all-in-one self-enhanced solid-state electrochemiluminescence sensing platform for the selective detection of spermine

The fabrication of an all-in-one solid-state ECL sensing platform is beneficial not only for expediting the miniaturization of sensing devices, but also, more importantly, for enabling point-of-care applications. In the present work, a self-enhanced solid-state ECL sensing platform is fabricated using newly synthesised silica polyethylene nanoparticles (SiO2-PEI NPs) which generate a co-reactant in situ and easily self-assemble with Ru(bpy)32+ and shows selective and sensitive detection of spermine at physiological pH (7.4). Spermine induces the maximum ECL emission intensity compared to other biogenic amines due to the presence of two secondary amines. A possible ECL reaction mechanism has been proposed based on CV and ECL experiments, DFT calculations, and in situ ECL spectrum analysis. The developed solid-state sensor showed a linear increase in ECL intensity with increasing spermine concentration in the range of 10 nM to 100 nM with an LOD of 12.2 nM. Compared to other biogenic amines in previous works, chemically synthesised SiO2-PEI NPs used in the present study act as an effective label- and enzyme-free sensor, and the new method is observed to be simple and cost-effective, to overcome various limitations of solution-phase ECL and to avoid the usage of any noble metals.

From theory to practice: understanding the challenges in the implementation of electrogenerated chemiluminescence for analytical applications

Electrogenerated chemiluminescence (ECL) stands out as a remarkable phenomenon of light emission at electrodes initiated by electrogenerated species in solution. Characterized by its exceptional sensitivity and minimal background optical signals, ECL finds applications across diverse domains, including biosensing, imaging, and various analytical applications. This review aims to serve as a comprehensive guide to the utilization of ECL in analytical applications. Beginning with a brief exposition on the theory at the basis of ECL generation, we elucidate the diverse systems employed to initiate ECL. Furthermore, we delineate the principal systems utilized for ECL generation in analytical contexts, elucidating both advantages and challenges inherent to their use. Additionally, we provide an overview of different electrode materials and novel ECL-based protocols tailored for analytical purposes, with a specific emphasis on biosensing applications.

Electrochemiluminescence of a First-Row d6 Transition Metal Complex

We report the electrochemiluminescence (ECL) of a 3d6 Cr(0) complex ([Cr(LMes)3]; λem=735 nm) with comparable photophysical properties to those of ECL-active complexes of 4d6 or 5d6 precious metal ions. The electrochemical potentials of [Cr(LMes)3] are more negative than those of [Ir(ppy)3] and render the [Cr(LMes)3]* excited state inaccessible through conventional co-reactant ECL with tri-n-propylamine or oxalate. ECL can be obtained, however, through the annihilation route in which potentials sufficient to oxidise and reduce the luminophore are alternately applied. When combined with [Ir(ppy)3] (λem=520 nm), the annihilation ECL of [Cr(LMes)3] was greatly enhanced whereas that of [Ir(ppy)3] was diminished. Under appropriate conditions, the relative intensities of the two spectrally distinct emissions can be controlled through the applied potentials. From this starting point for ECL with 3d6 metal complexes, we discuss some directions for future development.

A signal amplification electrochemiluminescence biosensor based on Ru(bpy)32+ and β-cyclodextrin for detection of AFP

By combining two different materials, metal-organic frameworks (MOF) and β-cyclodextrins (β-CD), a signal amplification electrochemical luminescence (ECL) immunosensor was constructed to realize the sensitive detection of AFP. The indium-based metal-organic framework (In-MOF) was used as the carrier of Ru(bpy)32+, and Ru(bpy)32+ was immobilized by In-MOF through suitable pore size and electrostatic interaction. At the same time, using host-guest recognition, β-CD enriched TPA into the hydrophobic cavity for accelerating the electronic excitation of TPA, then, achieving the purpose of signal amplification. The signal amplification immunosensor structure is constructed among the primary antibody Ab1 connected to the Ru(bpy)32+@In-MOF modified electrode, AFP, BSA and the secondary antibody (Ab2) loaded with TPA-β-CD. The immunosensor has a good linearity in the range of 10-5 ng/mL-50 ng/mL, and the low limit of detection (LOD) is 1.1 × 10-6 ng/mL. In addition, the electrochemiluminescence immunosensor that we designed has strong stability, good selectivity and repeatability, which provides a choice for the analysis of AFP.

Infrared photoinduced electrochemiluminescence microscopy of single cells

Electrochemiluminescence (ECL) is evolving rapidly from a purely analytical technique into a powerful microscopy. Herein, we report the imaging of single cells by photoinduced ECL (PECL; λem = 620 nm) stimulated by an incident near-infrared light (λexc = 1050 nm). The cells were grown on a metal-insulator-semiconductor (MIS) n-Si/SiOx/Ir photoanode that exhibited stable and bright PECL emission. The large anti-Stokes shift allowed for the recording of well-resolved images of cells with high sensitivity. PECL microscopy is demonstrated at a remarkably low onset potential of 0.8 V; this contrasts with classic ECL, which is blind at this potential. Two imaging modes are reported: (i) photoinduced positive ECL (PECL+), showing the cell membranes labeled with the [Ru(bpy)3]2+ complex; and (ii) photoinduced shadow label-free ECL (PECL-) of cell morphology, with the luminophore in the solution. Finally, by adding a new dimension with the near-infrared light stimulus, PECL microscopy should find promising applications to image and study single photoactive nanoparticles and biological entities.

Carboxyl groups on carbon nanodots as co-reactant sites for anodic electrochemiluminescence of tris(2,2-bipyridine)ruthenium(II)

Carbon nanodots (C-dots) with good biocompatibility have been extensively utilized as co-reactants for electrochemiluminescence (ECL) of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) system. However, the ECL intensity of this system is still relatively low and the mechanism of C-dots as co-reactants remains unclear, which greatly limits its further application in bio-analysis. In this work, we revealed that the carboxyl groups on C-dots are co-reactant sites for Ru(bpy)32+ ECL by systematically investigating the contribution of carboxyl, hydroxyl and carbonyl groups on the surface of C-dots to the ECL intensity. Further treatment with hydrogen peroxide to increase the carboxyl-group content on C-dots resulted in a 10-fold increase in ECL intensity over the original Ru(bpy)32+/C-dots system. This work provides new insights for the rational design of ECL systems with C-dots as co-reactants and offers new chances for further applications of C-dots in the field of ECL.

Emerging Insights into the Use of Advanced Nanomaterials for the Electrochemiluminescence Biosensor of Pesticide Residues in Plant-Derived Foodstuff

Pesticides have an important role in rising the overall productivity and yield of agricultural foods by eliminating and controlling insects, pests, fungi, and various plant-related illnesses. However, the overuse of pesticides has caused pesticide pollution of water bodies and food products, along with disruption of environmental and ecological systems. In this regard, developing low-cost, simple, and rapid-detecting approaches for the accurate, rapid, efficient, and on-site screening of pesticide residues is an ongoing challenge. Electrochemiluminescence (ECL) possesses the benefits of great sensitivity, the capability to resolve several analytes using different emission wavelengths or redox potentials, and excellent control over the light radiation in time and space, making it a powerful strategy for sensing various pesticides. Cost-effective and simple ECL systems allow sensitive, selective, and accurate quantification of pesticides in agricultural fields. Particularly, the development and progress of nanomaterials, aptamer/antibody recognition, electric/photo-sensing, and their integration with electrochemiluminescence sensing technology has presented the hopeful potential in reporting the residual amounts of pesticides. Current trends in the application of nanoparticles are debated, with an emphasis on sensor substrates using aptamer, antibodies, enzymes, and molecularly imprinted polymers (MIPs). Different strategies are enclosed in labeled and label-free sensing along with luminescence determination approaches (signal-off, signal-on, and signal-switch modes). Finally, the recent challenges and upcoming prospects in this ground are also put forward.

Nanobiosensing Based on Electro-Optically Modulated Technology

At the nanoscale, metals exhibit special electrochemical and optical properties, which play an important role in nanobiosensing. In particular, surface plasmon resonance (SPR) based on precious metal nanoparticles, as a kind of tag-free biosensor technology, has brought high sensitivity, high reliability, and convenient operation to sensor detection. By applying an electrochemical excitation signal to the nanoplasma device, modulating its surface electron density, and realizing electrochemical coupling SPR, it can effectively complete the joint transmission of electrical and optical signals, increase the resonance shift of the spectrum, and further improve the sensitivity of the designed biosensor. In addition, smartphones are playing an increasingly important role in portable mobile sensor detection systems. These systems typically connect sensing devices to smartphones to perceive different types of information, from optical signals to electrochemical signals, providing ideas for the portability and low-cost design of these sensing systems. Among them, electrochemiluminescence (ECL), as a special electrochemically coupled optical technology, has good application prospects in mobile sensing detection due to its strong anti-interference ability, which is not affected by background light. In this review, the SPR is introduced using nanoparticles, and its response process is analyzed theoretically. Then, the mechanism and sensing application of electrochemistry coupled with SPR and ECL are emphatically introduced. Finally, it extends to the relevant research on electrochemically coupled optical sensing on mobile detection platforms.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

Particle Size-Controlled Oxygen Reduction and Evolution Reaction Nanocatalysts Regulate Ru(bpy)32+'s Dual-potential Electrochemiluminescence for Sandwich Immunoassay

Multiple signal strategies remarkably improve the accuracy and efficiency of electrochemiluminescence (ECL) immunoassays, but the lack of potential-resolved luminophore pairs and chemical cross talk hinders their development. In this study, we synthesized a series of gold nanoparticles (AuNPs)/reduced graphene oxide (Au/rGO) composites as adjustable oxygen reduction reaction and oxygen evolution reaction catalysts to promote and modulate tris(2,2'-bipyridine) ruthenium(II) (Ru(bpy)₃²⁺)'s multisignal luminescence. With the increase in the diameter of AuNPs (3 to 30 nm), their ability to promote Ru(bpy)₃²⁺'s anodic ECL was first impaired and then strengthened, and cathodic ECL was first enhanced and then weakened. Au/rGOs with medium-small and medium-large AuNP diameters remarkably increased Ru(bpy)₃²⁺'s cathodic and anodic luminescence, respectively. Notably, the stimulation effects of Au/rGOs were superior to those of most existing Ru(bpy)₃²⁺ co-reactants. Moreover, we proposed a novel ratiometric immunosensor construction strategy using Ru(bpy)₃²⁺'s luminescence promoter rather than luminophores as tags of antibodies to achieve signal resolution. This method avoids signal cross talk between luminophores and their respective co-reactants, which achieved a good linear range of 10^-7 to 10^-1 ng/ml and a limit of detection of 0.33 fg/ml for detecting carcinoembryonic antigen. This study addresses the previous scarcity of the macromolecular co-reactants of Ru(bpy)₃²⁺, broadening its application in biomaterial detection. Furthermore, the systematic clarification of the detailed mechanisms for converting the potential-resolved luminescence of Ru(bpy)₃²⁺ could facilitate an in-depth understanding of the ECL process and should inspire new designs of Ru(bpy)₃²⁺ luminescence enhancers or applications of Au/rGOs to other luminophores. This work removes some impediments to the development of multisignal ECL biodetection systems and provides vitality into their widespread applications.

Electrochemiluminescence (ECL) biosensor based on tris(2,2'-bipyridyl)ruthenium(II) with glucose and lactate dehydrogenases encapsulated within alginate hydrogels

Two dehydrogenase enzymes (glucose, GDH, and lactate, LDH, dehydrogenases) encapsulated within alginate hydrogels were deposited on glassy carbon electrodes. The as-prepared enzyme modified alginate hydrogels were utilized as electrochemiluminescence (ECL)-based biosensors for the indirect detection of glucose and lactic acid upon reaction between NADH and tris(2,2'-bipyridyl) ruthenium (II) [Ru(bpy)₃]²⁺. The ECL response was obtained from the redox reaction between the substrate, the cofactor NAD⁺ and the encapsulated enzyme. The production of NADH resulting from the enzymatic reaction led to the ECL emission upon reaction with [Ru(bpy)₃]²⁺. The biosensors showed good stability and repeatability, with linear range between 0.56 and 4.2 µM and limit of detection of 0.84 µM for glucose, and linear range between 5 and 30 µM with a limit of detection of 2.52 µM for lactic acid. These ECL-based biosensors showed good sensitivity when tested in the presence of common interfering species. These biosensors were utilized in artificial sweat and were characterized by good reproducibility and repeatability. The results herein presented suggest that the dehydrogenases encapsulated within alginate hydrogels have potential for the development of biocompatible sensors for detection of glucose and lactic acid in physiological fluids.

Electrochemiluminescence Distance and Reactivity of Coreactants Determine the Sensitivity of Bead-Based Immunoassays

Herein we report the study of electrochemiluminescence (ECL) generation by tris(2,2'-bipyridyl)ruthenium (Ru(bpy)₃ ²⁺ ) and five tertiary amine coreactants. The ECL distance and lifetime of coreactant radical cations were measured by ECL self-interference spectroscopy. And the reactivity of coreactants was quantitatively evaluated in terms of integrated ECL intensity. By statistical analysis of ECL images of single Ru(bpy)₃ ²⁺ -labeled microbeads, we propose that ECL distance and reactivity of coreactant codetermine the emission intensity and thus the sensitivity of immunoassay. 2,2-bis(hydroxymethyl)-2,2',2''-nitrilotriethanol (BIS-TRIS) can well balance ECL distance-reactivity trade-off and enhance the sensitivity by 236 % compared with tri-n-propylamine (TPrA) in the bead-based immunoassay of carcinoembryonic antigen. The study brings an insightful understanding of ECL generation in bead-based immunoassay and a way of maximizing the analytical sensitivity from the aspect of coreactant.

Enhanced electrochemiluminescence at microgel-functionalized beads

Bead-based assays are successfully combined with electrochemiluminescence (ECL) technology for detection of a wide range of biomarkers. Herein, we demonstrate a novel approach to enhance the ECL signal by decorating micrometric beads with [Ru(bpy)₃]²⁺-grafted microgels (diameter ∼100 nm). Rapid and stable light emission was spatially resolved at the level of single functionalized beads. An enhancement of the ECL signal of microgel-labeled beads by 9-fold was observed in comparison to molecularly linked [Ru(bpy)₃]²⁺ beads prepared by a sandwich immunoassay or an amide bond. Imaging the ECL signal at the single bead level shows that the size of the ECL-emitting layer is extended using the microgels. The reported method offers a great promise for the optimization of bead-based ECL detection and subsequent development of ECL microscopy.

Boron-Doped Diamond Electrode Outperforms the State-of-the-Art Electrochemiluminescence from Microbeads Immunoassay

Electrochemiluminescence (ECL) is a powerful transduction technique where light emission from a molecular species is triggered by an electrochemical reaction. Application to biosensors has led to a wide range of electroanalytical methods with particular impact on clinical analysis for diagnostic and therapeutic monitoring. Therefore, the quest for increasing the sensitivity while maintaining reproducible and easy procedures has brought investigations and innovations in (i) electrode materials, (ii) luminophores, and (iii) reagents. Particularly, the ECL signal is strongly affected by the electrode material and its surface modification during the ECL experiments. Here, we exploit boron-doped diamond (BDD) as an electrode material in microbead-based ECL immunoassay to be compared with the approach used in commercial instrumentation. We conducted a careful characterization of ECL signals from a tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺)/tri-n-propylamine (TPrA) system, both homogeneous (i.e., free diffusing Ru(bpy)₃²⁺) and heterogeneous (i.e., Ru(bpy)₃²⁺ bound on microbeads). We investigated the methods to promote TPrA oxidation, which led to the enhancement of ECL intensity, and the results revealed that the BDD surface properties greatly affect the ECL emission, so it does the addition of neutral, cationic, or anionic surfactants. Our results from homogeneous and heterogeneous microbead-based ECL show opposite outcomes, which have practical consequences in ECL optimization. In conclusion, by using Ru(bpy)₃²⁺-labeled immunoglobulins bound on microbeads, the ECL resulted in an increase of 70% and a double signal-to-noise ratio compared to platinum electrodes, which are actually used in commercial instrumentation for clinical analysis. This research infers that microbead-based ECL immunoassays with a higher sensitivity can be realized by BDD.

Electrochemiluminescence with semiconductor (nano)materials

Electrochemiluminescence (ECL) is the light production triggered by reactions at the electrode surface. Its intrinsic features based on a dual electrochemical/photophysical nature have made it an attractive and powerful method across diverse fields in applied and fundamental research. Herein, we review the combination of ECL with semiconductor (SC) materials presenting various typical dimensions and structures, which has opened new uses of ECL and offered exciting opportunities for (bio)sensing and imaging. In particular, we highlight this particularly rich domain at the interface between photoelectrochemistry, SC material chemistry and analytical chemistry. After an introduction to the ECL and SC fundamentals, we gather the recent advances with representative examples of new strategies to generate ECL in original configurations. Indeed, bulk SC can be used as electrode materials with unusual ECL properties or light-addressable systems. At the nanoscale, the SC nanocrystals or quantum dots (QDs) constitute excellent bright ECL nano-emitters with tuneable emission wavelengths and remarkable stability. Finally, the challenges and future prospects are discussed for the design of new detection strategies in (bio)analytical chemistry, light-addressable systems, imaging or infrared devices.

Enhanced Cathodic Electrochemiluminescence of Luminol on Iron Electrodes

Electrochemiluminescence (ECL) behavior of luminol derivative was investigated in reduction on different electrode materials. We found that luminol and its widely used L-012 derivative, emitting at physiological pH values, exhibit strong cathodic ECL emission on iron and stainless steel electrodes with hydrogen peroxide, whereas no ECL signal was observed with other classic electrode materials (Au, Pt, and C). On a Ni electrode, a low cathodic ECL signal was observed. This points out to the essential role of iron-containing materials to enhance the cathodic ECL emission. Under the reported conditions, the cathodic ECL signal of L-012 is comparable to the classically used anodic ECL emission. Thus, dual bright ECL emissions with L-012 were obtained simultaneously in oxidation and in reduction on iron materials as imaged in a wireless bipolar electrochemistry configuration. Such an ECL system generating light emission concomitantly in oxidation and in reduction is extremely rare and it opens appealing (bio)analytical and imaging applications, in biosensing, remote detection, bipolar ECL analysis, and ECL-based cell microscopy.

Electrochemical sensor formed from poly(3,4-ethylenedioxyselenophene) and nitrogen-doped graphene composite for dopamine detection

In this study, an electrochemical sensor for dopamine (DA) detection has been developed by a composite of poly(3,4-ethylenedioxyselenophene) (PEDOS) and nitrogen-doped graphene (PEDOS/N-Gr) using an in situ polymerization method. Its structure and properties were then compared with those of the composites of poly(3,4-ethylenedioxythiophene) (PEDOT)/nitrogen-doped graphene (PEDOT/N-Gr), which were prepared by the same methods. FT-IR, Raman, UV-vis, XPS, mapping and SEM investigated the structure and morphology of these composites. These revealed that PEDOS/N-Gr had a higher conjugation degree than PEDOT/N-Gr. The synergetic effect between PEDOS and N-Gr was beneficial for the formation of a homogenous surface coating. The cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods were conducted for electrochemical detection of DA. Compared with PEDOT/N-Gr, the PEDOS/N-Gr displayed an enhanced sensitivity and electrocatalytic performance for DA detection with linear ranges of 0.008-80 μM (PEDOT/N-Gr: 0.04-70 μM) and limits of detection (LOD) of 0.0066 μM (S/N = 3) (PEDOT/N-Gr: 0.018 μM (S/N = 3)).

Electrochemiluminescence of Ru(bpy)32+/thioacetamide and its application for the sensitive determination of hepatotoxic thioacetamide

Thioacetamide (TAA) is a well-known hepatotoxic substance, so it is important to determine its presence and content in food and environmental samples. Herein, we report a highly sensitive determination method for TAA based on the electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(ii) (Ru(bpy)32+) for the first time by using TAA as a new coreactant for Ru(bpy)32+ ECL via an anodic route. The developed Ru(bpy)32+-TAA ECL system allows the determination of TAA with a good dynamic linear range and low limit of detection (LOD) of 0.1 μM to 1000 μM and 0.035 μM (3σ/m), respectively. In addition, the established ECL system can be applied to detect TAA in fruit juice and waste water samples with outstanding recoveries.

Lighting up the Electrochemiluminescence of Carbon Dots through Pre- and Post-Synthetic Design

Carbon dots (CDs), defined by their size of less than 10 nm, are a class of photoluminescent (PL) and electrochemiluminescent (ECL) nanomaterials that include a variety of carbon-based nanoparticles. However, the control of their properties, especially ECL, remains elusive and afflicted by a series of problems. Here, the authors report CDs that display ECL in water via coreactant ECL, which is the dominant mechanism in biosensing applications. They take advantage of a multicomponent bottom-up approach for preparing and studying the luminescence properties of CDs doped with a dye acting as PL and ECL probe. The dependence of luminescence properties on the surface chemistry is further reported, by investigating the PL and ECL response of CDs with surfaces rich in primary, methylated, or propylated amino groups. While precursors that contribute to the core characterize the PL emission, the surface states influence the efficiency of the excitation-dependent PL emission. The ECL emission is influenced by surface states from the organic shell, but states of the core strongly interact with the surface, influencing the ECL efficiency. These findings offer a framework of pre- and post-synthetic design strategies to improve ECL emission properties, opening new opportunities for exploring biosensing applications of CDs.

Induced self-enhanced electrochemiluminescence aptamer sensor for 17β-estradiol detection based on nitrogen-doped carbon quantum dots as Ru(dcbpy)32+ coreactant: What role of intermolecular hydrogen bonds play in the system?

Herein, an induced self-enhanced electrochemiluminescence (ECL) sensor with superior ECL performances was simply fabricated by just dropping the ECL reagent (tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride, Ru(dcbpy)₃Cl₂) and coreactant (nitrogen-doped carbon quantum dots, NCQDs) pair onto the surface of glassy carbon electrode. In this strategy, based on the carboxyl (-COOH) groups in Ru(dcbpy)₃²⁺ and oxygen, nitrogen-containing groups on NCQDs surface, an intermolecular hydrogen bonds-induced self-enhanced ECL composite was generated in the solid contact layer for the first time. Since Ru(dcbpy)₃²⁺ and NCQDs were co-existing in the same composite, the electron-transfer distance between them was shortened and the energy loss was decreased, thereby higher ECL efficiency was acquired. This working process greatly avoided the introduction of signal amplifier and simplified the experimental operation. On this basis, 17β-estradiol (E2) was selected as a target model to fabricate a self-enhanced ECL aptamer sensor for the investigation of its analytical performances. Resultantly, excellent detection properties of E2, including wider linear range of 1.0 × 10^-14 - 1.0 × 10^-6 mol L^-1 and lower detection limit of 1.0 × 10^-15 mol L^-1 with superior selectivity, were successfully achieved. Finally, E2 spiked into milk powder was quantified to assess the practicability of this sensor. Prospectively, this strategy could be extensively applied for other analytes determination by adjusting the corresponding target aptamers.

Electrochemiluminescence Loss in Photobleaching

The effects of photobleaching on electrochemiluminescence (ECL) was investigated for the first time. The plasma membrane of Chinese Hamster Ovary (CHO) cells was labeled with a [Ru(bpy)₃ ]²⁺ derivative. Selected regions of the fixed cells were photobleached using the confocal mode with sequential stepwise illumination or cumulatively and they were imaged by both ECL and photoluminescence (PL). ECL was generated with a model sacrificial coreactant, tri-n-propylamine. ECL microscopy of the photobleached regions shows lower ECL emission. We demonstrate a linear correlation between the ECL decrease and the PL loss due to the photobleaching of the labels immobilized on the CHO membranes. The presented strategy provides valuable information on the fundamentals of the ECL excited state and opens new opportunities for exploring cellular membranes by combining ECL microscopy with photobleaching techniques such as fluorescence recovery after photobleaching (FRAP) or fluorescence loss in photobleaching (FLIP) methods.

Ultrasensitive simultaneous detection of ascorbic acid, dopamine, uric acid and acetaminophen on a graphitized porous carbon-modified electrode

NHCS-1000/GCE produces a noticeable electrocatalytic response towards the anodic oxidation for the multiple sensing of AA, DA, UA and AC.

Electrogenerated chemiluminescence of Ru(bpy)32+ at MoS2 nanosheets modified electrode and its application in the sensitive detection of dopamine

Electrogenerated chemiluminescence (ECL) of Ru(bpy)₃²⁺ was studied at a MoS₂ nanosheets modified glassy carbon electrode (MoS₂NS/GCE) in neutral condition. Electrochemical results revealed that MoS₂ nanosheets could significantly catalyze the electrochemical oxidation of Ru(bpy)₃²⁺, as a result, strong anodic ECL was obtained. Several impact factors, such as the modified amount of MoS₂ nanosheets suspension, the pH value, and the concentration of Ru(bpy)₃²⁺, were investigated to obtain the optimal experimental condition. Dopamine exhibited apparent inhibiting effect on ECL intensity of Ru(bpy)₃²⁺-MoS₂ nanosheets through energy transfer process, and could be sensitively detected in the range of 1.0 × 10^-9 to 1.0 × 10^-4 mol L^-1. The linear equation between the decrease of ECL intensity and the logthium of dopamine concentration was determined as ΔI = 9965.02 + 1077.03lgC (C in mol L^-1), with the detection of 8.5 × 10^-10 mol L^-1 (3σ). The modified electrode exhibited satisfactory sensitivity, selectivity, and stability, which can be used to detect dopamine in real samples.

An electrogenerated chemiluminescence aptasensor for lysozyme based on the interaction between Ru(bpy)3 2+ and cucurbit[8]uril

Strong anodic Ru(bpy)₃ ²⁺ electrogenerated chemiluminescence (ECL) was obtained at a cucurbil[8]uril (CB[8]) modified electrode in neutral conditions without the need of an additional coreactant. An ECL aptasensor was fabricated based on the strong ECL emission as well as the host-guest interaction between DNA and CB[8]. Firstly, amino group-terminated complementary DNA (DNA-NH₂ ) was firmly immobilized on CB[8]/glass carbon electrode, which could further increase ECL intensity. Then, a ferrocene group-terminated lysozyme aptamer (Fc-DNA) was hybridized with complementary DNA. The inhibiting effect of ferrocene on Ru(bpy)₃ ²⁺ ECL resulted in the apparent decrease in ECL signal. When the modified electrode was incubated in lysozyme, specific binding between lysozyme and its aptamer could release the ferrocene group from the electrode surface, and the ECL emission was recovered. As a result, an 'on-off-on' mode ECL aptasensor for lysozyme was fabricated. In the range 0.14-140 pg ml^-1 , the increased ECL intensities exhibited excellent linearity with the logarithm of lysozyme concentrations, and the detection limit was calculated as 0.093 pg ml^-1 (3σ). The proposed ECL aptasensor exhibited satisfactory analytical performance, revealing the potential application of CB[n]s in an ECL sensing field.

Spatially resolved electrochemiluminescence through a chemical lens

Electrochemiluminescence (ECL) microscopy is an emerging technique with a wide range of imaging applications and unique properties in terms of high spatial resolution, surface confinement and favourable signal-to-noise ratio. Despite its successful analytical applications, tuning the depth of field (i.e., thickness of the ECL-emitting layer) is a crucial issue. Indeed, the control of the thickness of this ECL region, which can be considered as an "evanescent" reaction layer, limits the development of cell microscopy as well as bioassays. Here we report an original strategy based on chemical lens effects to tune the ECL-emitting layer in the model [Ru(bpy)3]2+/tri-n-propylamine (TPrA) system. It consists of microbeads decorated with [Ru(bpy)3]2+ labels, classically used in bioassays, and TPrA as the sacrificial coreactant. In particular we exploit the buffer capacity of the solution to modify the rate of the reactions involved in the ECL generation. For the first time, a precise control of the ECL light distribution is demonstrated by mapping the luminescence reactivity at the level of single micrometric bead. The resulting ECL image is the luminescent signature of the concentration profiles of diffusing TPrA radicals, which define the ECL layer. Therefore, our findings provide insights into the ECL mechanism and open new avenues for ECL microscopy and bioassays. Indeed, the reported approach based on a chemical lens controls the spatial extension of the "evanescent" ECL-emitting layer and is conceptually similar to evanescent wave microscopy. Thus, it should allow the exploration and imaging of different heights in substrates or in cells.

Recent developments in electrochemiluminescence nanosensors for cancer diagnosis applications

In recent years, electrochemiluminescence (ECL) nanosensing systems have undergone rapid development and made significant progress in ultrasensitive analysis and cell imaging. Because of the unique advantages of high selectivity, ultra-sensitivity, and good reproducibility, ECL nanosensors can open new paths for cancer diagnosis. With the development of ECL nanosensors, high-throughput analysis, visual detection and spatially resolved ECL imaging of single cells are being realized. The innovations of ECL nanosensors consist of electrochemical excitation, coreactant catalysis, light radiation and luminescence signal amplification, which involve several fields such as nanotechnology, catalysis, optics, and electrochemistry. The developments of ECL instruments also relate to imaging technology. Herein, we review the construction modes, sensing strategies and cancer diagnosis applications of ECL nanosenors. Firstly, the nano-components of the ECL sensing system are discussed. The construction and signal amplification methods of the nanosensing system are emphasized. Secondly, the high-efficiency cancer identification strategies are presented, including protein tumor marker detection, nucleic acid assay, cancer cell identification and exosome detection. The recent advances in representative examples of ECL nanosenors in cancer diagnosis are highlighted, including high-throughput ECL analysis, in situ assay, visual ECL detection, single-cell imaging diagnosis, and so on. Finally, the challenges are featured based on the recent development of the ECL nanosensing system in the clinical diagnosis. The ECL nanosensors provide effective and reliable analytical methods and open new paths for cancer diagnosis. It is noteworthy that the prospects of the ECL nanosensing system in clinical diagnosis are instructive to the developments of other nanosensor research.

Insights into the mechanism of coreactant electrochemiluminescence facilitating enhanced bioanalytical performance

Electrochemiluminescence (ECL) is a powerful transduction technique with a leading role in the biosensing field due to its high sensitivity and low background signal. Although the intrinsic analytical strength of ECL depends critically on the overall efficiency of the mechanisms of its generation, studies aimed at enhancing the ECL signal have mostly focused on the investigation of materials, either luminophores or coreactants, while fundamental mechanistic studies are relatively scarce. Here, we discover an unexpected but highly efficient mechanistic path for ECL generation close to the electrode surface (signal enhancement, 128%) using an innovative combination of ECL imaging techniques and electrochemical mapping of radical generation. Our findings, which are also supported by quantum chemical calculations and spin trapping methods, led to the identification of a family of alternative branched amine coreactants, which raises the analytical strength of ECL well beyond that of present state-of-the-art immunoassays, thus creating potential ECL applications in ultrasensitive bioanalysis.

Self-enhanced multicolor electrochemiluminescence by competitive electron-transfer processes

Controlling electrochemiluminescence (ECL) color(s) is crucial for many applications ranging from multiplexed bioassays to ECL microscopy. This can only be achieved through the fundamental understanding of high-energy electron-transfer processes in complex and competitive reaction schemes. Recently, this field has generated huge interest, but the effective implementation of multicolor ECL is constrained by the limited number of ECL-active organometallic dyes. Herein, the first self-enhanced organic ECL dye, a chiral red-emitting cationic diaza [4]helicene connected to a dimethylamino moiety by a short linker, is reported. This molecular system integrates bifunctional ECL features (i.e. luminophore and coreactant) and each function may be operated either separately or simultaneously. This unique level of control is enabled by integrating but decoupling both molecular functions in a single molecule. Through this dual molecular reactivity, concomitant multicolor ECL emission from red to blue with tunable intensity is readily obtained in aqueous media. This is done through competitive electron-transfer processes between the helicene and a ruthenium or iridium dye. The reported approach provides a general methodology to extend to other coreactant/luminophore systems, opening enticing perspectives for spectrally distinct detection of several analytes, and original analytical and imaging strategies.