Electrodeposition of self organized superstructure of copper dendrites or polyhedral particles on gold nanoparticle modified highly oriented pyrolytic graphite electrode

Effects of Adsorbate Diffusion and Edges in a Transition from Particle to Dendritic Morphology during Silver Electrodeposition

During silver electrodeposition on Au nanoparticle (NP)-covered highly oriented pyrolitic graphite, a transition from an initial growth of microsized particles to the growth of dendrites with pine tree shape (nanotrees) is observed, which is an advancement for material growth with hierarchical surface roughness. Using kinetic Monte Carlo simulations of an electrodeposition model, those results are explained by the interplay of diffusive cation flux in the electrolyte and relaxation of adsorbed atoms by diffusion on quenched crystal surfaces. First, simulations on NP-patterned substrates show the initial growth of faceted silver particles, followed by the growth of nanotrees with shapes similar to the experiments. Next, simulations on electrodes with large prebuilt particles explain the preferential nanotree growth at corners and edges as a tip effect. Simulations on wide flat electrodes relate the nanotree width with two model parameters describing surface diffusion of silver atoms: maximal number of random hops (G) and probability of hop per neighbor (P). Finally, simulations with small electrode seeds confirm the transition from initially compact particles to the nucleation of nanotrees and provide estimates of the transition sizes as a function of those parameters. The simulated compact and dendritic deposits show dominant (111) surface orientation, as observed in experiments. Extrapolations of simulation results to match microparticle and nanotree sizes lead to G = 4 × 10¹¹ and P = 0.03, suggesting to interpret those sizes as diffusion lengths on the growing surfaces and giving diffusion coefficients 2 to 3 × 10^-13 m²/s for deposited silver atoms. These results may motivate studies to relate diffusion coefficients with atomic-scale interactions.

Different Electrochemical Sensor Designs Based on Diazonium Salts and Gold Nanoparticles for Pico Molar Detection of Metals

We report a comparison of sensors’ performance of different hybrid nanomaterial architectures modifying an indium tin oxide (ITO) electrode surface. Diazonium salts and gold nanoparticles (AuNPs) were used as building units to design hybrid thin films of successive layers on the ITO electrode surface. Different architectures of hybrid thin films were prepared and characterized with different techniques, such as TEM, FEG-SEM, XPS, and EIS. The prepared electrodes were used to fabricate sensors for heavy metal detection and their performances were investigated using the square wave voltammetry (SWV) method. The comparison of the obtained results shows that the deposition of AuNPs on the ITO surface, and their subsequent functionalization by diazonium salt, is the best performing architecture achieving a high sensitivity in terms of the lower detection limit of pico molar.

Synthesis of dendritic silver nanostructures supported by graphene nanosheets and its application for highly sensitive detection of diazepam

In this paper, preparation, characterization and application of a new sensor for fast and simple determination of trace amount of diazepam were described. This sensor is based on Ag nanodendrimers (AgNDs) supported by graphene nanosheets modified glassy carbon electrode (GNs/GCE). The AgNDs were directly electrodeposited on the surface of electrode via potentiostatic method without using any templates, surfactants, or stabilizers. The structure of the synthesized AgNDs/GNs was characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS) techniques. The nanodendrimers with tree-like and hierarchical structures have a fascinating structure for fabrication of effective electrocatalysts. The experimental results confirmed that AgNDs/GNs/GC electrode has good electrocatalytic activity toward the reduction of diazepam. A low detection limit of 8.56 × 10^− 8 M and a wide linear detection range of 1.0 × 10^− 7 to 1.0 × 10^− 6 M and 1.0 × 10^− 6 to 20 × 10^− 6 M were achieved via differential pulse voltammetry (DPV). The proposed electrode displayed excellent repeatability and long-term stability and it was satisfactorily used for determination of diazepam in real samples (commercially tablet, injection and human blood plasma) with high recovery.

•

Applying a simple, fast and cost-effective method for synthesis of silver nanodendrimers

•

Characterization of AgNDs/GNs/GCE surface by SEM, EDX, XRD, EIS and CV methods

•

Successful application of this sensor for diazepam determination with an excellent detection limit

•

Calculation of diffusion coefficient, electron transfer coefficient and standard heterogeneous rate constant for diazepam

•

Satisfactorily using of this sensor for diazepam determination in several real samples