Comparison of a series of laccase mediators in the electro-oxidation reactions of non-phenolic lignin model compounds

Improved performance of immobilized laccase for catalytic degradation of synthetic dyes using redox mediators

Laccase is an important biodegradation agent as the catalytic degradation could be enhanced in the presence of redox mediators. This work aims to improve removal performance of the immobilized laccase...

Characterization of 2,3,7,8-tetrachlorodibenzo-p-dioxin biodegradation by extracellular lignin-modifying enzymes from ligninolytic fungus

Ligninolytic fungi secrete extracellular lignin-modifying enzymes (LME) that degrade plant polymers for fungal nutrition but that are, because of their broad substrate specificity, also applicable for the degradation of many hazardous pollutants. Laccase is one of the most well characterized LME and is involved in the removal and degradation of recalcitrant aromatic compounds with or without the assistance of laccase-mediators. The Ligninolytic fungus Rigidoporus sp. FMD21 can degrade 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) with a half-life of 6.2 days. Using Rigidoporus sp. FMD21 crude extracellular enzyme extract (ExE) that mainly consisted of laccase, 77.4% of 2,3,7,8-TCDD was degraded within 36 days. The degradation rate did not depend on the 2,3,7,8-TCDD concentration in the tested range between 0.005 and 0.5 pgTEQ/μL. 2,3,7,8-TCDD was analysed by DR-CALUX® bioassay and the degradation was confirmed by GC-HRMS. In this study, we found evidence for cleavage of the diaryl ether bond in the 2,3,7,8-TCDD molecule and here we propose a new degradation mechanism in which 3,4-dichlorophenol is the main metabolite of 2,3,7,8-TCDD degradation by FMD21's ExE. Six laccase-mediators were tested. Three of them 1-hydroxybenzotriazole (HBT), syringaldehyde (Syr) and violuric acid (Vio) showed an equipotent added effect on 2,3,7,8-TCDD degradation by ExE, however only in case of Vio a level of significance was reached. The others showed no effect or negatively impacted degradation. In conclusion, we have shown that Rigidoporus sp. FMD21 produces extracellular enzymes, mainly laccases that apparently are able to degrade the highly recalcitrant and most toxic 2,3,7,8-congener of TCDD via diaryl bond cleavage into 3,4-dichlorophenol.

Applicability of Recombinant Laccases From the White-Rot Fungus Obba rivulosa for Mediator-Promoted Oxidation of Biorefinery Lignin at Low pH

Utilization of lignin-rich side streams has been a focus of intensive studies recently. Combining biocatalytic methods with chemical treatments is a promising approach for sustainable modification of lignocellulosic waste streams. Laccases are catalysts in lignin biodegradation with proven applicability in industrial scale. Laccases directly oxidize lignin phenolic components, and their functional range can be expanded using low-molecular-weight compounds as mediators to include non-phenolic lignin structures. In this work, we studied in detail recombinant laccases from the selectively lignin-degrading white-rot fungus Obba rivulosa for their properties and evaluated their potential as industrial biocatalysts for the modification of wood lignin and lignin-like compounds. We screened and optimized various laccase mediator systems (LMSs) using lignin model compounds and applied the optimized reaction conditions to biorefinery-sourced technical lignin. In the presence of both N-OH-type and phenolic mediators, the O. rivulosa laccases were shown to selectively oxidize lignin in acidic reaction conditions, where a cosolvent is needed to enhance lignin solubility. In comparison to catalytic iron(III)-(2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) oxidation systems, the syringyl-type lignin units were preferred in mediated biocatalytic oxidation systems.

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. In this Review, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e. g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

Photoelectrochemical Decomposition of Lignin Model Compound on a BiVO4 Photoanode

The photoelectrochemical decomposition of lignin model compounds at a BiVO₄ photoanode is demonstrated with simulated sunlight and an applied bias of 2.0 V. These prototypical lignin model compounds are photoelectrochemically converted into the corresponding aryl aldehyde and phenol derivatives in a single step with conversion of up to ≈64 % over 20 h. Control experiments suggest that vanadium sites are electrocatalytically active, which precludes the need for a redox mediator in solution. This feature of the system is corroborated by a layer of V₂ O₅ deposited on BiVO₄ serving to boost the conversion by 10 %. Our methodology capitalizes on the reactive power of sunlight to drive reactions that have only been studied previously by electrochemical or catalytic methods. The use of a BiVO₄ photoanode to drive lignin model decomposition therefore provides a new platform to extract valuable aromatic chemical feedstocks using solar energy, electricity and biomass as the only inputs.

LC-MSMS based screening of emerging pollutant degradation by different peroxidases

BACKGROUND

The presence of a wide range of bioactive organic pollutants in wastewater and municipal water sources is raising concerns about their potential effects on humans. Not surprisingly, various approaches are being explored that can efficiently degrade these persistent organic pollutants. Use of peroxidases has recently been recognized as a novel remediation approach that may have potential advantages over conventional degradation techniques. However, testing the abilities of different peroxidases to degrade diverse emerging pollutants is tedious and cumbersome.

RESULTS

In the present study, we present a rapid and robust approach to easily test the degradability of 21 different emerging pollutants by five different peroxidases (soybean peroxidase, chloroperoxidase, lactoperoxidase, manganese peroxidase, and horseradish peroxidase) using an LC-MSMS approach. Furthermore, this approach was also used to examine the role of a redox mediator in these enzymatic degradation assays. Our results show that some of the organic pollutants can be easily degraded by all five of the peroxidases tested, whereas others are only degraded by a specific peroxidase (or when a redox mediator was present) and there are some that are completely resistant to degradation by any of the peroxidases tested (even in the presence of a redox mediator). The degradation of furosemide and trimethoprim by soybean peroxidase and chloroperoxidase, respectively, was investigated in detail by examining the transformation products generated during their degradation. Some of the products generated during enzymatic breakdown of these pollutants have been previously reported by others, however, we report many new transformation products.

CONCLUSIONS

LC-MSMS approaches, like the one described here, can be used to rapidly evaluate the potential of different peroxidases (and redox requirements) to be used as bioremediation agents. Our preliminary result shows peroxidases hold tremendous potential for being used in a final wastewater treatment step.

N-Hydroxyphthalimide: A Hydrogen Atom Transfer Mediator in Hydrocarbon Oxidations Promoted by Nonheme Iron(IV)-Oxo Complexes

The oxidation of a series of hydrocarbons by the nonheme iron(IV)-oxo complex [(N4Py)Fe^IV═O]²⁺ is efficiently mediated by N-hydroxyphthalimide. The increase of reactivity is associated to the oxidation of the mediator to the phthalimide N-oxyl radical, which efficiently abstracts a hydrogen atom from the substrates, regenerating the mediator in its reduced form.

Developing energy efficient lignin biomass processing - towards understanding mediator behaviour in ionic liquids

Environmental concerns have brought attention to the requirement for more efficient and renewable processes for chemicals production. Lignin is the second most abundant natural polymer, and might serve as a sustainable resource for manufacturing fuels and aromatic derivatives for the chemicals industry after being depolymerised. In this work, the mediator 2,2'-azino-bis(3-ethylbenthiazoline-6-sulfonic acid) diammonium salt (ABTS), commonly used with enzyme degradation systems, has been evaluated by means of cyclic voltammetry (CV) for enhancing the oxidation of the non-phenolic lignin model compound veratryl alcohol and three types of lignin (organosolv, Kraft and lignosulfonate) in the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate, ([C2mim][C2SO4]). The presence of either veratryl alcohol or organosolv lignin increased the second oxidation peak of ABTS under select conditions, indicating the ABTS-mediated oxidation of these molecules at high potentials in [C2mim][C2SO4]. Furthermore, CV was applied as a quick and efficient way to explore the impact of water in the ABTS-mediated oxidation of both organosolv and lignosulfonate lignin. Higher catalytic efficiencies of ABTS were observed for lignosulfonate solutions either in sodium acetate buffer or when [C2mim][C2SO4] (15 v/v%) was present in the buffer solution, whilst there was no change found in the catalytic efficiency of ABTS in [C2mim][C2SO4]-lignosulfonate mixtures relative to ABTS alone. In contrast, organosolv showed an initial increase in oxidation, followed by a significant decrease on increasing the water content of a [C2mim][C2SO4] solution.

Distinguishing ionic and radical mechanisms of hydroxylamine mediated electrocatalytic alcohol oxidation using NO–H bond dissociation energies

An idea is proposed to sort N-oxyl radicals with respect to their mechanisms of electrocatalytic alcohol oxidation by knowing the NO–H bond dissociation energies of their precursors.

Fungal laccases as tools for biodegradation of industrial dyes

Laccases are blue copper oxidases, found in some plants and secreted by a wide range of ligninolytic fungi. These enzymes are well known for their ability in oxidizing several organic compounds, mainly phenolics and aromatic amines, at the expenses of molecular oxygen. Therefore, they could find application in the field of enzymatic bioremediation of many industrial wastewaters, and in particular to bleach and/or detoxify dye-containing effluents. Not all industrial dyes behave as laccase substrates, but this limitation is often overcome by the judicious use of redox mediators. These could substantially widen the application range of laccases as bioremediation tools. The present study encompasses the main properties of the most used industrial dyes as related to their chemical classification, fungal laccases and their molecular and catalytic features, the use of redox mediators, limitations and perspectives of the use of fungal laccases for industrial dye bleaching.

Introduction of chemically labile substructures into Arabidopsis lignin through the use of LigD, the Cα-dehydrogenase from Sphingobium sp. strain SYK-6

Bacteria-derived enzymes that can modify specific lignin substructures are potential targets to engineer plants for better biomass processability. The Gram-negative bacterium Sphingobium sp. SYK-6 possesses a Cα-dehydrogenase (LigD) enzyme that has been shown to oxidize the α-hydroxy functionalities in β-O-4-linked dimers into α-keto analogues that are more chemically labile. Here, we show that recombinant LigD can oxidize an even wider range of β-O-4-linked dimers and oligomers, including the genuine dilignols, guaiacylglycerol-β-coniferyl alcohol ether and syringylglycerol-β-sinapyl alcohol ether. We explored the possibility of using LigD for biosynthetically engineering lignin by expressing the codon-optimized ligD gene in Arabidopsis thaliana. The ligD cDNA, with or without a signal peptide for apoplast targeting, has been successfully expressed, and LigD activity could be detected in the extracts of the transgenic plants. UPLC-MS/MS-based metabolite profiling indicated that levels of oxidized guaiacyl (G) β-O-4-coupled dilignols and analogues were significantly elevated in the LigD transgenic plants regardless of the signal peptide attachment to LigD. In parallel, 2D NMR analysis revealed a 2.1- to 2.8-fold increased level of G-type α-keto-β-O-4 linkages in cellulolytic enzyme lignins isolated from the stem cell walls of the LigD transgenic plants, indicating that the transformation was capable of altering lignin structure in the desired manner.

Integrated hot-compressed water and laccase-mediator treatments of Eucalyptus grandis fibers: structural changes of fiber and lignin

Eucalyptus grandis fibers were treated with hot-compressed water (HCW) and laccase mediator to enhance the fiber characteristics and to produce an active lignin substrate for binderless fiberboard production. The composition, morphology, and crystallinity index (CrI) analysis of fibers showed that the HCW treatment increased the CrI and lignin content of the treated fibers through partial removal of hemicelluloses. Simultaneously, the HCW treatment produced some granules and holes on the surface of the fibers, which possibly facilitated the accessibility of the laccase mediator. Milled wood lignins and enzymatic hydrolysis lignins isolated from the control and treated fibers were comparatively characterized. A reduction of molecular weight was observed, which indicated that a preferential degradation of lignin occurred after exposure to the laccase mediator. Quantitative (13)C, 2D-HSQC and (31)P NMR characterization revealed that the integrated treatment resulted in the cleavage of β-O-4' linkages, removal of G' (oxidized α-ketone) substructures, and an increase in the S/G ratio and free phenolic hydroxyls.