Facile preparation of β-Ni(OH)2-NiCo2O4 hybrid nanostructure and its application in the electro-catalytic oxidation of methanol

Green-Mediated Synthesis of NiCo2O4 Nanostructures Using Radish White Peel Extract for the Sensitive and Selective Enzyme-Free Detection of Uric Acid

The ability to measure uric acid (UA) non-enzymatically in human blood has been demonstrated through the use of a simple and efficient electrochemical method. A phytochemical extract from radish white peel extract improved the electrocatalytic performance of nickel-cobalt bimetallic oxide (NiCo2O4) during a hydrothermal process through abundant surface holes of oxides, an alteration of morphology, an excellent crystal quality, and increased Co(III) and Ni(II) chemical states. The surface structure, morphology, crystalline quality, and chemical composition were determined using a variety of analytical techniques, including powder X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and X-ray photoelectron spectroscopy (XPS). The electrochemical characterization by CV revealed a linear range of UA from 0.1 mM to 8 mM, with a detection limit of 0.005 mM and a limit of quantification (LOQ) of 0.008 mM. A study of the sensitivity of NiCo2O4 nanostructures modified on the surface to UA detection with amperometry has revealed a linear range from 0.1 mM to 4 mM for detection. High stability, repeatability, and selectivity were associated with the enhanced electrochemical performance of non-enzymatic UA sensing. A significant contribution to the full outperforming sensing characterization can be attributed to the tailoring of surface properties of NiCo2O4 nanostructures. EIS analysis revealed a low charge-transfer resistance of 114,970 Ohms that offered NiCo2O4 nanostructures prepared with 5 mL of radish white peel extract, confirming an enhanced performance of the presented non-enzymatic UA sensor. As well as testing the practicality of the UA sensor, blood samples from human beings were also tested for UA. Due to its high sensitivity, stability, selectivity, repeatability, and simplicity, the developed non-enzymatic UA sensor is ideal for monitoring UA for a wide range of concentrations in biological matrixes.

Non-enzymatic disposable electrochemical sensors based on CuO/Co3O4@MWCNTs nanocomposite modified screen-printed electrode for the direct determination of urea

A new electrochemical impedimetric sensor for direct detection of urea was designed and fabricated using nanostructured screen-printed electrodes (SPEs) modified with CuO/Co₃O₄ @MWCNTs. A facile and simple hydrothermal method was achieved for the chemical synthesis of the CuO/Co₃O₄ nanocomposite followed by the integration of MWCNTs to be the final platform of the urea sensor. A full physical and chemical characterization for the prepared nanomaterials were performed including Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), contact angle, scanning electron microscope (SEM) and transmission electron microscopy (TEM). Additionally, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to study the electrochemical properties the modified electrodes with the nanomaterials at different composition ratios of the CuO/Co₃O₄ or MWCNTs. The impedimetric measurements were optimized to reach a picomolar sensitivity and high selectivity for urea detection. From the calibration curve, the linear concentration range of 10^-12-10^-2 M was obtained with the regression coefficient (R²) of 0.9961 and lower detection limit of 0.223 pM (S/N = 5). The proposed sensor has been used for urea analysis in real samples. Thus, the newly developed non-enzymatic sensor represents a considerable advancement in the field for urea detection, owing to the simplicity, portability, and low cost-sensor fabrication.

Molybdenum carbide/Ni nanoparticles-incorporated carbon nanofibers as effective non-precious catalyst for urea electrooxidation reaction

In this study, molybdenum carbide and carbon were investigated as co-catalysts to enhance the nickel electro-activity toward urea oxidation. The proposed electrocatalyst has been formulated in the form of nanofibrous morphology to exploit the advantage of the large axial ratio. Typically, calcination of electropsun polymeric nanofibers composed of poly(vinyl alcohol), molybdenum chloride and nickel acetate under vacuum resulted in producing good morphology molybdenum carbide/Ni NPs-incorporated carbon nanofibers. Investigation on the composition and morphology of the proposed catalyst was achieved by XRD, SEM, XPS, elemental mapping and TEM analyses which concluded formation of molybdenum carbide and nickel nanoparticles embedded in a carbon nanofiber matrix. As an electrocatalyst for urea oxidation, the electrochemical measurements indicated that the proposed composite has a distinct activity when the molybdenum content is optimized. Typically, the nanofibers prepared from electrospun nanofibers containing 25 wt% molybdenum precursor with respect to nickel acetate revealed the best performance. Numerically, using 0.33 M urea in 1.0 M KOH, the obtained current densities were 15.5, 44.9, 52.6, 30.6, 87.9 and 17.6 mA/cm² for nanofibers prepared at 850 °C from electropsun mats containing 0, 5, 10, 15, 25 and 35 molybdenum chloride, respectively. Study the synthesis temperature of the proposed composite indicated that 1000 °C is the optimum calcination temperature. Kinetic studies indicated that electrooxidation reaction of urea does not follow Arrhenius's law.

Foam Synthesis of Nickel/Nickel (II) Hydroxide Nanoflakes Using Double Templates of Surfactant Liquid Crystal and Hydrogen Bubbles: A High-Performance Catalyst for Methanol Electrooxidation in Alkaline Solution

This work demonstrates the chemical synthesis of two-dimensional nanoflakes of mesoporous nickel/nickel (II) hydroxide (Ni/Ni(OH)₂-NFs) using double templates of surfactant self-assembled thin-film and foam of hydrogen bubbles produced by sodium borohydride reducing agent. Physicochemical characterizations show the formation of amorphous mesoporous 2D nanoflakes with a Ni/Ni(OH)₂ structure and a high specific surface area (165 m²/g). Electrochemical studies show that the electrocatalytic activity of Ni/Ni(OH)₂ nanoflakes towards methanol oxidation in alkaline solution is significantly enhanced in comparison with that of parent bare-Ni(OH)₂ deposited from surfactant-free solution. Cyclic voltammetry shows that the methanol oxidation mass activity of Ni/Ni(OH)₂-NFs reaches 545 A/cm² g_cat at 0.6 V vs. Ag/AgCl, which is more than five times higher than that of bare-Ni(OH)₂. Moreover, Ni/Ni(OH)₂-NFs reveal less charge transfer resistance (10.4 Ω), stable oxidation current density (625 A/cm² g_cat at 0.7 V vs. Ag/AgCl), and resistance to the adsorption of reaction intermediates and products during three hours of constant-potential methanol oxidation electrolysis in alkaline solution. The high-performance electrocatalytic activity of Ni/Ni(OH)₂ nanoflakes is mainly derived from efficient charge transfer due to the high specific surface area of the 2D mesoporous architecture of the nanoflakes, as well as the mass transport of methanol to Ni²⁺/Ni³⁺ active sites throughout the catalyst layer.

A three-dimensional flower-like Mn–Ni–Co–O microstructure as a high-performance electrocatalyst for the methanol oxidation reaction

A Mn–Ni–Co–O ternary metal oxide with a unique 3D microstructure shows high electrocatalytic activity and stability towards methanol electrooxidation.

Electrodeposition of hybrid nanosheet-structured NiCo2O4 on carbon fiber paper as a non-noble electrocatalyst for efficient electrooxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid

Hybrid nanosheet-structured NiCo₂O₄ on CFP as a self-supporting electrode for electrochemical oxidation of HMF to FDCA.

Simultaneous Electrochemical Detection of Nitrite and Hydrogen Peroxide Based on 3D Au-rGO/FTO Obtained Through a One-Step Synthesis

In this paper, Au and reduced graphene oxide (rGO) were successively deposited on fluorine-doped SnO₂ transparent conductive glass (FTO, 1 × 2 cm) via a facile and one-step electrodeposition method to form a clean interface and construct a three-dimensional network structure for the simultaneous detection of nitrite and hydrogen peroxide (H₂O₂). For nitrite detection, 3D Au-rGO/FTO displayed a sensitivity of 419 μA mM-1 cm-2 and a linear range from 0.0299 to 5.74 mM, while for the detection of H₂O₂, the sensitivity was 236 μA mM-1 cm-2 and a range from 0.179 to 10.5 mM. The combined results from scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction measurements (XRD) and electrochemical tests demonstrated that the properties of 3D Au-rGO/FTO were attributabled to the conductive network consisting of rGO and the good dispersion of Au nanoparticles (AuNPs) which can provide better electrochemical properties than other metal compounds, such as a larger electroactive surface area, more active sites, and a bigger catalytic rate constant.

Ultrathin NiS/Ni(OH)2 Nanosheets Filled within Ammonium Polyacrylate-Functionalized Polypyrrole Nanotubes as an Unique Nanoconfined System for Nonenzymatic Glucose Sensors

Ultrathin two-dimensional NiS/Ni(OH)₂ nanosheets (NiS/Ni(OH)₂ NSs) were successfully filled within the hollow interiors of ammonium polyacrylate-functionalized polypyrrole nanotubes (NH₄PA/PPyNTs) by a simple solvothermal method. This kind of novel hierarchical nanostructures with typical structural features of a nanoconfined system, denoted by NiS/Ni(OH)₂/NH₄PA/PPyNTs, were prepared by two main sections: polyacrylic acid (PAA) was first polymerized on PPyNTs containing vinyl groups, and the obtained PAA/PPyNTs exhibited a typical Janus structure, whose external surface was covered with carboxyl groups and the internal surface was still covered with PPy chains; second, Ni²⁺ ions as a precursor were facilely combined with -NH- segments in PPy chains by the coordination interaction under the solvothermal environment; therefore, NiS/Ni(OH)₂ NSs (<1 nm) were well distributed on the internal surface of NH₄PA/PPyNTs by the in situ growth. Because of the synergistic effects of ionizable NH₄PA, PPy with good conductivity, NiS and Ni(OH)₂ with electrocatalytical activity, as well as the nanoconfinement effect, the obtained NiS/Ni(OH)₂@NH₄PA/PPyNTs exhibited excellent electrocatalytic performance for detecting glucose. Sufficiently thin shells composed of ionizable NH₄PA and good conductive PPyNTs can not only promote the electronic transmission effectively during the electrochemical detection of glucose but also hardly limit the transport of glucose and products. In addition, ultrathin NiS/Ni(OH)₂ NSs may further enhance the electrocatalytic performance for glucose because of the more exposed active sites with the large surface area. Therefore, NiS/Ni(OH)₂@NH₄PA/PPyNTs can be applied as a good electrode material with stability and sensitivity for building a nonenzymatic glucose sensor.

A practical non-enzymatic urea sensor based on NiCo2O4 nanoneedles

We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo₂O₄) nanoneedles.

MnFe2O4@nitrogen-doped reduced graphene oxide nanohybrid: an efficient bifunctional electrocatalyst for anodic hydrazine oxidation and cathodic oxygen reduction

A bifunctional MnFe₂O₄/N-rGO composite synthesized hydrothermally in a single step is demonstrated for hydrazine oxidation and oxygen reduction.

Simultaneous determination of epinephrene and paracetamol at copper-cobalt oxide spinel decorated nanocrystalline zeolite modified electrodes

In this study, CuCo2O4 and CuCo2O4 decorated nanocrystalline ZSM-5 materials were prepared. For comparative study, a series of MCo2O4 spinels were also prepared. Materials were characterized by the complementary combination of X-ray diffraction, N2-adsorption, UV-visible, and electron microscopic techniques. A simple and rapid method for the simultaneous determination of paracetamol and epinephrine at MCo2O4 spinels modified electrodes is presented in this manuscript. Among the materials investigated in this study, CuCo2O4 decorated nanocrystalline ZSM-5 exhibited the highest electrocatalytic activity with excellent stability, sensitivity, and selectivity. Analytical performance of the sensor was demonstrated in the determination of epinephrine and paracetamol in the commercial pharmaceutical samples.

Facile synthesis of a mechanically robust and highly porous NiO film with excellent electrocatalytic activity towards methanol oxidation

Considerable research is being conducted in searching for effective anode catalysts in alkaline direct methanol fuel cells (DMFCs). Although significant progress has been achieved, it is still challenging to prepare non-Pt catalysts with both excellent activity and good durability. Herein, a highly porous NiO film is developed by a facile and fast anodization approach. The anodic NiO film demonstrates a high surface area, large mesopore volume and small crystallite size, leading to facilitated adsorption of reaction species, easy electrolyte penetration and fast reaction kinetics. Furthermore, as anodic NiO is grown in situ on a metallic substrate with strong adhesion strength and good electrical contact, it can be used directly as an anode catalyst for methanol oxidation without the need to add any binder or conducting agent. Such an additive-free approach greatly expedites the catalyst preparation process. The anodic NiO shows lower methanol oxidation potential, higher oxidation current and better catalytic durability than most of the state-of-the-art Ni-based catalysts reported elsewhere. As anodization is a simple, low cost and easily scaled up method, the work described here provides an exciting direction to speed up the practical application of alkaline DMFCs.

Longitudinal Hierarchy Co3O4 Mesocrystals with High-dense Exposure Facets and Anisotropic Interfaces for Direct-Ethanol Fuel Cells

Novel electrodes are needed for direct ethanol fuel cells with improved quality. Hierarchical engineering can produce catalysts composed of mesocrystals with many exposed active planes and multi-diffused voids. Here we report a simple, one-pot, hydrothermal method for fabricating Co₃O₄/carbon/substrate electrodes that provides control over the catalyst mesocrystal morphology (i.e., corn tubercle pellets or banana clusters oriented along nanotube domains, or layered lamina or multiple cantilevered sheets). These morphologies afforded catalysts with a high density of exposed active facets, a diverse range of mesopores in the cage interior, a window architecture, and vertical alignment to the substrate, which improved efficiency in an ethanol electrooxidation reaction compared with a conventional platinum/carbon electrode. On the atomic scale, the longitudinally aligned architecture of the Co₃O₄ mesocrystals resulted in exposed low- and high-index single and interface surfaces that had improved electron transport and diffusion compared with currently used electrodes.

Hierarchical nickel oxide nanosheet@nanowire arrays on nickel foam: an efficient 3D electrode for methanol electro-oxidation

Hierarchical nickel oxide nanosheet@nanowire arrays hydrothermally grown on nickel foam behave as an efficient 3D anode for electro-catalytic oxidation of methanol in alkaline media.

Nickel Cobaltite Nanostructures for Photoelectric and Catalytic Applications

Bimetallic oxide nickel cobaltite (NiCo2 O4 ) shows extensive potential for innovative photoelectronic and energetic materials owing to their distinctive physical and chemical properties. In this review, representative fabrications and applications of NiCo2 O4 nanostructures are outlined for photoelectronic conversion, catalysis, and energy storage, aiming to promote the development of NiCo2 O4 nanomaterials in these fields through an analysis and comparison of their diverse nanostructures. Firstly, a brief introduction of the spinel structures, properties, and morphologies of NiCo2 O4 nanomaterials are presented. Then, the advanced progress of NiCo2 O4 nanomaterials for both photoelectronic conversion and energy fields is summarized including such examples as solar cells, electrocatalysis, and lithium ion batteries. Finally, further prospects and promising developments of NiCo2 O4 nanomaterials in these significant fields are proposed.

Synthesis of NiCo2O4/Nano-ZSM-5 nanocomposite material with enhanced electrochemical properties for the simultaneous determination of ascorbic acid, dopamine, uric acid and tryptophan

The high electrocatalytic activity of the sensor can be attributed to the highly dispersed NiCo₂O₄ on Nano-ZSM-5 matrix.