Highly Crystallized Cubic Cattierite CoS 2 for Electrochemically Hydrogen Evolution over Wide pH Range from 0 to 14

Advances in Understanding Tungsten Disulfide Dynamics during the Hydrogen-Evolution Reaction: An Initial Step in Elucidating the Mechanism

Tungsten disulfide (WS2), a promising electrocatalyst made from readily available materials, demonstrates significant effectiveness in the hydrogen-evolution reaction (HER). The study conducts a thorough investigation using various analytical methods such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and in situ Raman spectroscopy. These techniques have uncovered changes in the WS2 particle structure during HER. Through employing EPR, XAS, and in situ Raman spectroscopy, the research reveals structural and chemical transformations. This includes the formation of novel W species and signs of W-O bond formation. Moreover, significant changes in the morphology of the particles were observed. These findings offer enhanced insights into the mechanisms of WS2 under HER conditions, highlighting its catalytic performance and durability.

Cobalt-Based Nanoscale Material: An Emerging Electrocatalyst for Hydrogen Production

Modern civilization has been highly suffering from energy crisis and environmental pollutions. These two burning issues are directly and indirectly created from fossil fuel consumption and uncontrolled industrialization. The above critical issue can be solved through the proper utilization of green energy sources where no greenhouse gases will be generated upon burning of such materials. Hydrogen is the most eligible candidate for this purpose. Among various methods of hydrogen generation, electrocatalytic process is one of the most efficient methods because of easy handling and high efficiency. In these aspects Co-based nanomaterials are considered to be extremely significant as they can be utilized as efficient, recyclable and ideal catalytic system. In this article a series of Co-based nano-electrocatalysts has been discussed with proper structure-property relationship and their medium dependency. Therefore, such type of stimulating summary on recently reported electrocatalysts and their activity may be helpful for scientists of the corresponding field as well as for broader research communities. This can be inspiration for materials researchers to fabricate active catalysts for the production of hydrogen gas in room temperature.

In Situ Growth of Nano-MoS2 on Graphite Substrates as Catalysts for Hydrogen Evolution Reaction

In order to synthesize a high-efficiency catalytic electrode for hydrogen evolution reactions, nano-MoS₂ was deposited in situ on the surface of graphite substrates via a one-step hydrothermal method. The effects of the reactant concentration on the microstructure and the electrocatalytic characteristics of the nano-MoS₂ catalyst layers were investigated in detail. The study results showed that nano-MoS₂ sheets with a thickness of about 10 nm were successfully deposited on the surface of the graphite substrates. The reactant concentration had an important effect on uniform distribution of the catalyst layers. A higher or lower reactant concentration was disadvantageous for the electrochemical performance of the nano-MoS₂ catalyst layers. The prepared electrode had the best electrocatalytic activity when the thiourea concentration was 0.10 mol·L^-1. The minimum hydrogen evolution reaction overpotential was 196 mV (j = 10 mV·cm^-2) and the corresponding Tafel slope was calculated to be 54.1 mV·dec^-1. Moreover, the prepared electrode had an excellent cycling stability, and the microstructure and the electrocatalytic properties of the electrode had almost no change after 2000 cycles. The results of the present study are helpful for developing low-cost and efficient electrode material for hydrogen evolution reactions.

In Situ Filling of the Oxygen Vacancies with Dual Heteroatoms in Co3O4 for Efficient Overall Water Splitting

Electrocatalytic water splitting is a crucial area in sustainable energy development, and the development of highly efficient bifunctional catalysts that exhibit activity toward both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of paramount importance. Co₃O₄ is a promising candidate catalyst, owing to the variable valence of Co, which can be exploited to enhance the bifunctional catalytic activity of HER and OER through rational adjustments of the electronic structure of Co atoms. In this study, we employed a plasma-etching strategy in combination with an in situ filling of heteroatoms to etch the surface of Co₃O₄, creating abundant oxygen vacancies, while simultaneously filling them with nitrogen and sulfur heteroatoms. The resulting N/S-V_O-Co₃O₄ exhibited favorable bifunctional activity for alkaline electrocatalytic water splitting, with significantly enhanced HER and OER catalytic activity compared to pristine Co₃O₄. In an alkaline overall water-splitting simulated electrolytic cell, N/S-V_O-Co₃O₄ || N/S-V_O-Co₃O₄ showed excellent overall water splitting catalytic activity, comparable to noble metal benchmark catalysts Pt/C || IrO₂, and demonstrated superior long-term catalytic stability. Additionally, the combination of in situ Raman spectroscopy with other ex situ characterizations provided further insight into the reasons behind the enhanced catalyst performance achieved through the in situ incorporation of N and S heteroatoms. This study presents a facile strategy for fabricating highly efficient cobalt-based spinel electrocatalysts incorporated with double heteroatoms for alkaline electrocatalytic monolithic water splitting.

Mechanism study of CoS2/Fe(III)/peroxymonosulfate catalysis system: The vital role of sulfur vacancies

Peroxymonosulfate (PMS) activation methods have attractive advantages in advanced oxidation process (AOPs) due to their powerful ability of directly or indirectly generating various reactive oxygen species (ROS). Herein, trace amount of Fe(III) ions were added into the commercial-CoS₂/PMS system to improve the CoS₂/PMS decomposition for organics removal. The organics removal efficiency could reach >90% towards methylene blue (MB), diclofenac sodium (DCF), sulfamethoxazole (SMX) and bisphenol A (BPA) in the CoS₂/Fe(III)/PMS system, with the kinetic apparent rate constant k_obs of 0.141, 0.206, 0.247 and 0.091 min^-1, respectively. The synergistic effect between Fe(III) ions and sulfur-vacancies on CoS₂ for PMS degradation were revealed for the first time in cobalt sulfides/PMS system. Quenching experiments and ESR analysis proved that ¹O₂ was the major ROS and was produced mainly by the hydrolysis of SO₅^•-. Besides, the high degradation efficiency was obtained by the contribution of SO₄^•- and ^•OH. Electron spin-resonance spectroscopy (ESR), cyclic voltammetry (CV) and Raman spectrum data revealed that the addition of Fe(III) ions could optimize the intensity of sulfur vacancies on the CoS₂ surface, which hindered the PMS reduction ability of Co(II), but accelerated the PMS oxidation to form ¹O₂. The degradation path of MB was analyzed by liquid chromatograph-mass spectrometer (LC-MS). The mechanism studies speculated that the sulfur vacancies of CoS₂ provided the binding sites for Fe(III) ions with Co(II), which facilitated the PMS activation by Co(III).

In Situ Decorated Ni Metallic Layer with CoS2-Layered Thin Films via a Layer-by-Layer Strategy Using Pulsed Laser Deposition for Enhanced Electrocatalytic OER

The catalytic activity of 3d-transition-metal-based electrocatalysts has exhibited considerable enhancements in electrocatalytic water splitting via pioneering modulations in the active sites. To overcome the energy loss because of the mechanic steps involved in a complex oxygen evolution reaction (OER), the electrode surface with only a few layers would be an advantage over multilayers for the ease of the electrolyte interaction and gas evolution. Here, for the first time, thin films of CoS₂ are prepared on a carbon cloth via a pulsed laser deposition (PLD) technique via layer-by-layer deposition of Ni that tend to give Ni-CoS₂ thin films. Based on varying the ablation of metallic Ni followed by CoS₂ as a layer-by-layer assembly using PLD, three catalysts, namely, Ni5-CoS₂, Ni10-CoS₂, and Ni15-CoS₂, were prepared. In OER, to achieve a benchmarking current density of 10 mA cm^-2 in 1 M KOH, Ni10-CoS₂ required a lesser overpotential of 304 mV, whereas others, namely, Ni5-CoS₂, Ni15-CoS₂, and CoS₂, required overpotentials of 328, 336, and 373 mV, respectively, to attain the same current density. The charge transfer kinetics associated with all of the catalysts were analyzed, and the corresponding Tafel slope values for Ni5-CoS₂ and Ni10-CoS₂ were 75 and 98 mV/dec, respectively, ensuring the facile transfer of electrons at the interface. The assistance of metallic Ni sites also ensured stability for long-term applications. These findings will give a way for other earth-abundant catalysts for the increased electrocatalytic activity toward energy needs in future.

Electrochemical Detection of Hydrazine by Carbon Paste Electrode Modified with Ferrocene Derivatives, Ionic Liquid, and CoS2-Carbon Nanotube Nanocomposite

The electrocatalytic performance of carbon paste electrode (CPE) modified with ferrocene-derivative (ethyl2-(4-ferrocenyl[1,2,3]triazol-1-yl)acetate), ionic liquid (n-hexyl-3-methylimidazolium hexafluorophosphate), and CoS2-carbon nanotube nanocomposite (EFTA/IL/CoS2-CNT/CPE) was investigated for the electrocatalytic detection of hydrazine. CoS2-CNT nanocomposite was characterized by field emission scanning electron microscopy, X-ray powder diffraction, and transmission electron microscopy. According to the results of cyclic voltammetry, the EFTA/IL/CoS2-CNT-integrated CPE has been accompanied by greater catalytic activities for hydrazine oxidation compared to the other electrodes in phosphate buffer solution at a pH 7.0 as a result of the synergistic impact of fused ferrocene-derivative, IL, and nanocomposite. The sensor responded linearly with increasing concentration of hydrazine from 0.03 to 500.0 μM with a higher sensitivity (0.073 μA μM-1) and lower limit of detection (LOD, 0.015 μM). Furthermore, reasonable reproducibility, lengthy stability, and excellent selectivity were also attained for the proposed sensor. Finally, EFTA/IL/CoS2-CNT/CPE was applied for the detection of hydrazine in water samples, and good recoveries varied from 96.7 to 103.0%.

A novel electrochemical immunosensor based on CoS2 for early screening of tumor marker carcinoembryonic antigen

In this work, PANI–HRP nanoparticles integrate biometric recognition and signal amplification functions in one body, which can be converted to each other without consuming the material itself.

Nanoarchitectonics for Transition-Metal-Sulfide-Based Electrocatalysts for Water Splitting

Heterogenous electrocatalysts based on transition metal sulfides (TMS) are being actively explored in renewable energy research because nanostructured forms support high intrinsic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, it is described how researchers are working to improve the performance of TMS-based materials by manipulating their internal and external nanoarchitectures. A general introduction to the water-splitting reaction is initially provided to explain the most important parameters in accessing the catalytic performance of nanomaterials catalysts. Later, the general synthetic methods used to prepare TMS-based materials are explained in order to delve into the various strategies being used to achieve higher electrocatalytic performance in the HER. Complementary strategies can be used to increase the OER performance of TMS, resulting in bifunctional water-splitting electrocatalysts for both the HER and the OER. Finally, the current challenges and future opportunities of TMS materials in the context of water splitting are summarized. The aim herein is to provide insights gathered in the process of studying TMS, and describe valuable guidelines for engineering other kinds of nanomaterial catalysts for energy conversion and storage technologies.

A Three-dimensional Floating Air Cathode with Dual Oxygen Supplies for Energy-efficient Production of Hydrogen Peroxide

The in situ and cleaner electrochemical production of hydrogen peroxide (H2O2) through two-electron oxygen reduction reaction has drawn increasing attentions in environmental applications as an alterantive to traditional anthraquinone process. Air cathodes avoid the need of aeration, but face the challenges of declined performance during scale-up due to non-uniform water infiltration or even water leakage, which is resulted from changing water pressures and immature cathode fabrication at a large scale. To address these challenges, a three-dimensional (3-D) floating air cathode (FAC) was built around the commercial sponge, by coating with carbon black/poly(tetrafluoroethylene) using a simple dipping-drying method. The FAC floated on the water-air interface without extensive water-proof measures, and could utilize oxygen both from passive diffusion and anodic oxygen evolution to produce H2O2. The FAC with six times of dipping treatment produced a maximum H2O2 concentration of 177.9 ± 26.1 mg L-1 at 90 min, with low energy consumption of 7.1 ± 0.003 Wh g-1 and stable performance during 10 cycles of operation. Our results showed that this 3-D FAC is a promising approach for in situ H2O2 production for both environmental remediation and industrial applications.

Spherical Ruthenium Disulfide-Sulfur-Doped Graphene Composite as an Efficient Hydrogen Evolution Electrocatalyst

The exploition of cost-efficient and high-performance catalysts to boost hydrogen generation in overall water splitting is crucial to economically obtain green hydrogen energy. Herein, we propose a novel electrocatalyst consisting of spherical RuS₂ on S-doped reduced graphene oxide (s-RuS₂/S-rGO) with high catalytic behavior toward hydrogen evolution reaction (HER) in all pH conditions, especially in alkaline electrolytes. RuS₂/S-rGO delivers small overpotentials of 25 and 56 mV at current densities of 10 and 50 mA cm^-2, respectively, and a low Tafel slope of 29 mV dec^-1 with good stability for 100 h in basic solutions. This performance is comparable to and even exceeds that of documented representative electrocatalysts, including the benchmark Pt/C; since the price of Ru is about 1/25th that of Pt, this novel electrocatalyst offers a low-cost alternative to Pt-based HER electrocatalysts. Ruthenium-centered sites of RuS₂ in this hybrid catalyst are responsible for the HER active sites, and S doping in RuS₂ also exerts an important function for the HER activity; density functional theory calculations disclose that the water dissociation ability and adsorption free energy of hydrogen intermediate adsorption (Δ G_H*) for RuS₂ are very close to those of Pt. A homemade electrolyzer with an s-RuS₂/S-rGO (cathode)//RuO₂/C (anode) couple presents a relatively low voltage of 1.54 V at a current density of 20 mA cm^-2, while maintaining negligible deactivation over a 24 h operation.

Hydrogen evolution reactions boosted by bridge bonds between electrocatalysts and electrodes

The interfacial interactions between nanostructured electrode materials and electrodes play an important part in the performance enhancement of electrochemical energy devices. However, the mechanism of interfacial interactions, as well as its influence on device performance, still remains unclear and is rarely studied. In this work, a CoS₂ nanobelt catalyst assembled on Ti foil (CoS₂ nanobelts/Ti) is prepared through in situ chemical conversions and chosen as an example to probe the interfacial interactions between the CoS₂ catalyst and the Ti electrode, and the correlation between the interfacial interaction and the hydrogen evolution reaction (HER) performance. By a series of characterization studies and analyses, we propose that interfacial bridge bonds (Ti-S-Co and Ti-O-Co) in a covalent form may exist in the CoS₂ nanobelts/Ti as well as its precursor Co(OH)₃ nanobelts growing on Ti foil, which is further supported by density functional theory (DFT) calculations. Moreover, as a binder-free electrocatalytic electrode, the CoS₂ nanobelts/Ti shows boosted HER performance, including higher catalytic activity, and lower overpotential and Tafel slope, compared to its counterpart transformed from a solution-produced precursor. The HER performance enhancement is ascribed to the existence of interfacial bridge bonds that not only strengthen the electrode-catalyst mechanical integrity, but also serve as efficient charge transfer channels between the electrode and the catalyst, thus ensuring a stable and fluent electron transfer for the HER. Furthermore, the DFT calculations reveal that the CoS₂ nanobelts/Ti catalyst with interfacial covalent interactions can facilitate the adsorption of H⁺ ions/H₂ molecules and the desorption of H₂ molecules for an accelerated HER. This work provides a new insight into the interfacial interactions between electrodes and electrode materials in electrochemical devices, and paves the way for the rational design and construction of high-performance electrochemical devices for practical energy applications.

Hierarchical Co–FeS2/CoS2 heterostructures as a superior bifunctional electrocatalyst

The traditional method of preparing hydrogen and oxygen as efficient clean energy sources mainly relies on the use of platinum, palladium, and other precious metals. However, the high cost and low abundance limit wide application of such metals. As such, one challenging issue is the development of low-cost and high-efficiency electrocatalysts for such purposes. In this study, we synthesized Co–FeS₂/CoS₂ heterostructures via a hydrothermal method for efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Benefitting from their unique three-dimensional hierarchical nanostructures, Co-doped FeS₂, and CoS₂ formed heterostructures on Co–FeS₂ petals, which bestowed remarkable electrocatalytic properties upon Co–FeS₂/CoS₂ nanostructures. Co–FeS₂/CoS₂ effectively catalyzed the OER with an overpotential of 278 mV at a current density of 10 mA cm⁻² in 1 M KOH solution, and also is capable of driving a current density −10 mA cm⁻² at an overpotential of −103 mV in 0.5 M H₂SO₄ solution. The overpotential of the OER and HER only decreased by 5 mV and 3 mV after 1000 cycles. Our Co–FeS₂/CoS₂ materials may offer a promising alternative to noble metal-based electrocatalysts for water splitting.

Here we report a facile solvothermal synthesis of Co–FeS₂/CoS₂ heterostructures with remarkable electrocatalytic properties.

A Ni(OH)2-CoS2 hybrid nanowire array: a superior non-noble-metal catalyst toward the hydrogen evolution reaction in alkaline media

The rising H₂ economy urgently demands active, durable and cost-effective catalysts for the electrochemical hydrogen evolution reaction (HER). However, improving the HER performance of electrocatalysts in alkaline media is still challenging. Herein, we report the development of a nickel hydroxide-cobalt disulfide nanowire array on a carbon cloth (Ni(OH)₂-CoS₂/CC) as a hybrid catalyst to significantly enhance the HER activity in alkaline solutions. Benefitting from heterogeneous interfaces in this 3D hybrid electrocatalyst, Ni(OH)₂-CoS₂/CC shows superior HER activity with only 99 mV overpotential to drive a current density of 20 mA cm^-2 in 1.0 M KOH, which is 100 mV less than that of CoS₂/CC. Moreover, Ni(OH)₂-CoS₂/CC exhibits long-term electrochemical durability with the maintenance of its catalytic activity for 30 h. Density functional theory calculations are performed to gain further insight into the effect of Ni(OH)₂-CoS₂ interfaces, revealing that Ni(OH)₂ plays a key role in water dissociation to hydrogen intermediates and CoS₂ facilitates the adsorption of hydrogen intermediates and H₂ generation. This work not only develops a promising electrocatalyst for the alkaline HER, but also paves a way to enhance the alkaline HER activity of CoS₂via the interface engineering strategy.

Homologous Catalysts Based on Fe-Doped CoP Nanoarrays for High-Performance Full Water Splitting under Benign Conditions

The design and development of earth-abundant electrocatalysts for efficient full water splitting under mild conditions are highly desired, yet remain a challenging task. A homologous Fe-doped Co-based nanoarray incorporating complementary catalysts is shown to effect high-performance and durable water splitting in near-neutral media. Iron-doped cobalt phosphate borate nanoarray on carbon cloth (Fe-Co-Pi-Bi/CC) derived from iron-doped cobalt phosphide on CC (Fe-CoP/CC) through oxidative polarization behaves as a highly active bimetallic electrocatalyst for water oxidation with an overpotential of 382 mV to afford a catalytic current density of 10 mA cm^-2 in 0.1 m potassium borate (K-Bi, pH 9.2). Fe-CoP/CC is also highly active for the hydrogen evolution reaction, capable of driving 10 mA cm^-2 at an overpotential of only 175 mV in 0.1 m K-Bi. A two-electrode water electrolyzer incorporating Fe-Co-Pi-Bi/CC as anode and Fe-CoP/CC as cathode achieves 10 mA cm^-2 water-splitting current at a cell voltage of 1.95 V with strong long-term electrochemical durability.

An amorphous dual action electrocatalyst based on oxygen doped cobalt sulfide for the hydrogen and oxygen evolution reactions

Here we electrodeposit an amorphous bifunctional electrocatalyst that is active for both the HER and OER under alkaline conditions which is based on oxygen doped cobalt sulfide.

Cobalt disulfide/graphite foam composite films as self-standing electrocatalytic electrodes for overall water splitting

A unique inter-layer porous 3D cobalt disulfide/graphite foam (CoS₂/GF) electrocatalytic electrode exhibits superior performance for overall water splitting.

Co9S8@N,P-doped porous carbon electrocatalyst using biomass-derived carbon nanodots as a precursor for overall water splitting in alkaline media

Using biomass-derived carbon nanodots as a precursor, Co₉S₈@N,P-doped porous carbon was fabricated by a molten-salt calcination and post-phosphorization method, and exhibits HER and OER bifunctional catalytic activity.

Hydrazine-assisted electrolytic hydrogen production: CoS2nanoarray as a superior bifunctional electrocatalyst

A CoS₂nanoarray on Ti mesh acts as an efficient and durable catalyst for the hydrazine oxidation reaction and it only needs 0.81 V to attain 100 mA cm⁻²in 1.0 M KOH with 100 mM hydrazine for its two-electrode electrolyser.

CoS(2x)Se(2(1-x)) nanowire array: an efficient ternary electrocatalyst for the hydrogen evolution reaction

Binary transition metal dichalcogenides (TMDs) have emerged as efficient catalysts for the hydrogen evolution reaction (HER). Co-based TMDs, such as CoS2 and CoSe2, demonstrate promising HER performance due to their intrinsic metallic nature. Recently, the ternary electrocatalysts were widely acknowledged for their prominent efficiency as compared to their binary counterparts due to increased active sites caused by the incorporation of different atoms. Herein, we successfully grew the ternary CoS2xSe2(1-x) (x = 0.67) nanowires (NWs) on a flexible carbon fiber. As a superior electrocatalyst, ternary CoS2xSe2(1-x) NWs arrays demonstrated excellent catalytic activity for electrochemical hydrogen evolution in acidic media, achieving current densities of 10 mA cm(-2) and 100 mA cm(-2) at overpotentials of 129.5 mV and 174 mV, respectively. Notably, the high stability of CoS2xSe2(1-x) NWs suggested that the ternary CoS2xSe2(1-x) NWs are a scalable catalyst for electrochemical hydrogen evolution.

A highly active and stable hydrogen evolution catalyst based on pyrite-structured cobalt phosphosulfide

Rational design and controlled synthesis of hybrid structures comprising multiple components with distinctive functionalities are an intriguing and challenging approach to materials development for important energy applications like electrocatalytic hydrogen production, where there is a great need for cost effective, active and durable catalyst materials to replace the precious platinum. Here we report a structure design and sequential synthesis of a highly active and stable hydrogen evolution electrocatalyst material based on pyrite-structured cobalt phosphosulfide nanoparticles grown on carbon nanotubes. The three synthetic steps in turn render electrical conductivity, catalytic activity and stability to the material. The hybrid material exhibits superior activity for hydrogen evolution, achieving current densities of 10 mA cm(-2) and 100 mA cm(-2) at overpotentials of 48 mV and 109 mV, respectively. Phosphorus substitution is crucial for the chemical stability and catalytic durability of the material, the molecular origins of which are uncovered by X-ray absorption spectroscopy and computational simulation.

Nitrogen, phosphorus co-doped carbon dots/CoS2 hybrid for enhanced electrocatalytic hydrogen evolution reaction

A nitrogen, phosphorus co-doped carbon dots/CoS₂ hybrid was synthesized as electrocatalyst for hydrogen evolution reaction with desirable electrocatalytic activities (low overpotential ∼78 mV, small Tafel slope ∼76 mV dec⁻¹) and long-term stability in acidic media.

Highly selective catalytic conversion of phenols to aromatic hydrocarbons on CoS2/MoS2 synthesized using a two step hydrothermal method

CoS₂/MoS₂ composite catalysts were synthesized by two-step hydrothermal method and presented very high hydrodeoxygenation and direct deoxygenation activity in phenols conversion.

Well-dispersed CoS2 nano-octahedra grown on a carbon fibre network as efficient electrocatalysts for hydrogen evolution reaction

Well-dispersed CoS₂ nanocrystals grown on a carbon fibre network have been shown to be efficient electrocatalysts for hydrogen evolution reaction.