Enhanced Performance of Flexible Dye-Sensitized Solar Cell based on Nickel Sulfide/Polyaniline/Titanium Counter Electrode

Bi and Sn Doping Improved the Structural, Optical and Photovoltaic Properties of MAPbI3-Based Perovskite Solar Cells

One of the most amazing photovoltaic technologies for the future is the organic–inorganic lead halide perovskite solar cell, which exhibits excellent power conversion efficiency (PCE) and can be produced using a straightforward solution technique. Toxic lead in perovskite can be replaced by non-toxic alkaline earth metal cations because they keep the charge balance in the material and some of them match the Goldschmidt rule’s tolerance factor. Therefore, thin films of MAPbI₃, 1% Bi and 0%, 0.5%, 1% and 1.5% Sn co-doped MAPbI₃ were deposited on FTO-glass substrates by sol-gel spin-coating technique. XRD confirmed the co-doping of Bi–Sn in MAPbI₃. The 1% Bi and 1% Sn co-doped film had a large grain size. The optical properties were calculated by UV-Vis spectroscopy. The 1% Bi and 1% Sn co-doped film had small E_g, which make it a good material for perovskite solar cells. These films were made into perovskite solar cells. The pure MAPbI₃ film-based solar cell had a current density (J_sc) of 9.71 MA-cm⁻², its open-circuit voltage (V_oc) was 1.18 V, its fill factor (FF) was 0.609 and its efficiency (η) was 6.98%. All of these parameters were improved by the co-doping of Bi–Sn. The cell made from a co-doped MAPbI₃ film with 1% Bi and 1% Sn had a high efficiency (10.03%).

Synergetic effect of a polymer and metalloid composite on the electrocatalytic improvement of dye-sensitized solar cells

Si nanoparticles exhibited significant enhancement on a polymer electrocatalyst and had comparable performance to that of conventional dye-sensitized solar cells.

A Review on the Advancement of Ternary Alloy Counter Electrodes for Use in Dye-Sensitised Solar Cells

A dye-sensitised solar cell (DSSC) counter electrode (CE) plays a vital role in catalysing the conversion of triiodide ( I 3 − ) to iodide ions ( I − ), thereby ensuring the completion of the repetitive cycle of electricity generation. The platinum CE, despite being the standard counter electrode in DSSCs, has drawbacks of platinum’s rarity and high cost. Platinum is an excellent redox catalyst, and consequently, it is the most sought-after metal for catalytic conversions. The huge demand for platinum in the automotive industry for vehicular catalytic converters, the pharmaceutical industry, and in oil refining, as well as other industries, has driven its price to unprecedented levels. The prohibitive price of platinum has caused newer thin film technologies, such as the DSSC which depends on the platinum CE, to be cost-ineffective, thus meaning they cannot compete with the better-established silicon-based solar cells. These problems have stagnated the development of the DSSC, which in turn has dampened larger commercialisation prospects for this thin film technology. With this in mind, this review paper focuses on recent progress in the research and development of alternative cost-effective materials to replace Pt-based CEs. Ternary alloys are amongst the possible alternatives that have been explored, yielding varied results. Alloys, especially ternary sulphides, selenides, and oxides, are attractive as alternatives as they are cheap and are easily fabricated. Ternary alloys also have a synergistic effect produced by the coexistence of two metal ions in a crystal structure, which is believed to induce greater catalytic capability, thus making them ideal cost-effective materials to replace the Pt CE in DSSCs. This review intends to highlight the performance of ternary alloy counter electrodes through the analysis of charge transfer resistance and power conversion efficiencies. Focus is also given to the restrictions and impediments to the attainment of higher power conversion efficiency in alternative CEs. The advances in fabrication of simple ternary alloys, as well as more advanced hierarchical nanostructured counter electrodes, are discussed here in detail. Results obtained to date indicate that the efficiencies of ternary alloy counter electrodes are still below that of the platinum counter electrode, and hence more research is required to enhance their efficiencies.

One-Pot Solvothermal in Situ Growth of 1D Single-Crystalline NiSe on Ni Foil as Efficient and Stable Transparent Conductive Oxide Free Counter Electrodes for Dye-Sensitized Solar Cells

One-dimensional single-crystal nanostructural nickel selenides were successfully in situ grown on metal nickel foils by two simple one-step solvothermal methods, which formed NiSe/Ni counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). The nickel foil acted as the nickel source in the reaction process, a supporting substrate, and an electron transport "speedway". Electrochemical testing indicated that the top 1D single-crystal NiSe exhibited prominent electrocatalytic activity for I₃^- reduction. Due to the metallic conductivity of Ni substrate and the outstanding electrocatalytic activity of single-crystal NiSe, the DSSC based on a NiSe/Ni CE exhibited higher fill factor (FF) and larger short-circuit current density (J_sc) than the DSSC based on Pt/FTO CE. The corresponding power conversion efficiency (6.75%) outperformed that of the latter (6.18%). Moreover, the NiSe/Ni CEs also showed excellent electrochemical stability in the I^-/I₃^- redox electrolyte. These findings indicated that single-crystal NiSe in situ grown on Ni substrate was a potential candidate to replace Pt/TCO as a cheap and highly efficient counter electrode of DSSC.

Pt- and TCO-Free Flexible Cathode for DSSC from Highly Conducting and Flexible PEDOT Paper Prepared via in Situ Interfacial Polymerization

Here, we report the preparation of a flexible, free-standing, Pt- and TCO-free counter electrode in dye-sensitized solar cell (DSSC)-derived from polyethylenedioxythiophene (PEDOT)-impregnated cellulose paper. The synthetic strategy of making the thin flexible PEDOT paper is simple and scalable, which can be achieved via in situ polymerization all through a roll coating technique. The very low sheet resistance (4 Ω/□) obtained from a film of 40 μm thick PEDOT paper (PEDOT-p-5) is found to be superior to the conventional fluorine-doped tin oxide (FTO) substrate. The high conductivity (357 S/cm) displayed by PEDOT-p-5 is observed to be stable under ambient conditions as well as flexible and bending conditions. With all of these features in place, we could develop an efficient Pt- and TCO-free flexible counter electrode from PEDOT-p-5 for DSSC applications. The catalytic activity toward the tri-iodide reduction of the flexible electrode is analyzed by adopting various electrochemical methodologies. PEDOT-p-5 is found to display higher exchange current density (7.12 mA/cm(2)) and low charge transfer resistance (4.6 Ω) compared to the benchmark Pt-coated FTO glass (2.40 mA/cm(2) and 9.4 Ω, respectively). Further, a DSSC fabricated using PEDOT-p-5 as the counter electrode displays a comparable efficiency of 6.1% relative to 6.9% delivered by a system based on Pt/FTO as the counter electrode.

Synthesis and electronic properties of comb-like polyamides bearing different contents of tetraaniline pendant groups

Tunable electronic properties could be accomplished by importing different numbers of tetraaniline pendants into the polymeric scaffolds.

Nickel sulfide counter electrode modified with polypyrrole nanoparticles to enhance catalytic ability for flexible dye-sensitized solar cells

An efficient platinum-free counter electrode of nickel sulfide/polypyrrole/titanium foil with excellent electrochemical catalytic ability was prepared and used for flexible dye-sensitized solar cells.

Efficient Dye-Sensitized Solar Cells Made from High Catalytic Ability of Polypyrrole@Platinum Counter Electrode

Polypyrrole@platinum (PPy@Pt) composite film was successfully synthesized by using a one-step electrochemical method and served as counter electrode (CE) for efficient dye-sensitized solar cells (DSSCs). The PPy@Pt CE with one-dimensional structure exhibited excellent electrocatalytic activity and superior charge transfer resistance for I(-)/I3 (-) electrolyte after being the cyclic voltammetry and electrochemical impedance spectroscopy tested. The photocurrent-photovoltage curves were further used to calculate the theoretical photoelectric performance parameters of the DSSCs. The DSSC based on the PPy@Pt CE achieved a remarkable power conversion efficiency of 7.35 %, higher about 19.9 % than that of conventional Pt CE (6.13 %). This strategy provides a new opportunity for fabricating low-cost and highly efficient DSSCs.

Fine Tuning of Nanocrystal and Pore Sizes of TiO2 Submicrospheres toward High Performance Dye-Sensitized Solar Cells

In general, the properties and performance of mesoporous TiO2 are greatly dependent on its crystal size, crystallinity, porosity, surface area, and morphology; in this regard, design and fine-tuning the crystal and pore sizes of the TiO2 submicrospheres and investigating the effect of these factors on the properties and photoelectric performance of dye-sensitized solar cells (DSSCs) is essential. In this work, uniform TiO2 submicrospheres were synthesized by a two-step procedure containing hydrolysis and solvothermal process. The crystal and pore sizes of the TiO2 submicrospheres were fine-tuned and controlled in a narrow range by adjusting the quantity of NH4OH during the solvothermal process. The effect of crystal and pore size of TiO2 submicrosphere on the performance of the DSSCs and their properties including dye-loading capacity, light scattering effect, power conversion efficiency (PCE), incident photon-to-electron conversion efficiencies (IPCEs), and electron recombination were compared and analyzed. The results show that increasing pore size plays a more significant role in improving the dye-loading capacity and PCE than increasing surface area, and an overall PCE value of 8.62% was obtained for the device with a 7.0 μm film thickness based on the TiO2 submicrospheres treated with 0.6 mL of NH4OH. Finally, the best TiO2 submicrosphere based photoanode film was optimized by TiCl4 treatment, and increasing film thickness and a remarkable PCE up to 11.11% were achieved.

One-Pot Synthesis of Mesoporous TiO₂ Micropheres and Its Application for High-Efficiency Dye-Sensitized Solar Cells

TiO2 microspheres are of great interest for a great deal of applications, especially in the solar cell field. Because of their unique microstructure and light-scattering effect, TiO2 microsphere-based solar cells often exhibit superior photovoltaic performance. Hence, exploring new suitable TiO2 microspheres for high-efficiency solar cells is essential. In this work, we demonstrate a facile one-pot solvothermal approach for synthesis of TiO2 microspheres using acetone as solvent. The as-prepared TiO2 microspheres are composed of densely interconnected nanocrystals and possess a high specific surface area up to 138.47 m(2) g(-1). As the photoanode, the TiO2 microsphere-based DSSC gives higher dye loading and light adsorption ability as well as longer electron lifetime, resulting in higher short-circuit current value and superior power conversion efficiency (PCE) compared with Dyesol 18 nm TiO2 nanoparticle paste. Finally, the TiO2 microsphere-based DSSC were optimized by adding a TiO2 nanocrystal underlayer and TiCl4 post-treatment, giving a high PCE of 10.32%.

PEDOT:PSS assisted preparation of a graphene/nickel cobalt oxide hybrid counter electrode to serve in efficient dye-sensitized solar cells

A much higher photovoltaic performance of a dye-sensitized solar cell with a (P-A) Gr/NiCo₂O₄ counter electrode is achieved than that of a Pt configuration device.

The effect of structural dimensionality on the electrocatalytic properties of the nickel selenide phase

Synthesis of different morphologies of nickel selenide structures and their activities in various applications.

One-step anion-assisted electrodeposition of ZnO nanofibrous networks as photoanodes for dye-sensitized solar cells

An efficient ZnO photoanode consisting of nanofibrous networks for DSSCs was synthesized using a one-step electrodeposition in a solution containing Zn(NO₃)₂, KCl, NaCH₃COO, and Na₃C₆H₅O₇.