One-step Synthesis of Pt Nanoparticles Highly Loaded on Graphene Aerogel as Durable Oxygen Reduction Electrocatalyst

Graphene aerogels via hydrothermal gelation of graphene oxide colloids: Fine-tuning of its porous and chemical properties and catalytic applications

Recently, 3D graphene aerogel has garnered a high interest aiming at benefiting of the excellent properties of graphene in devices for energy storage or environmental remediation. Hydrothermal gelation of GO dispersion is a straightforward method that offers many opportunities for tuning its properties and for processing it to devices. By adjusting hydrothermal gelation and drying conditions, it is possible to tune the density (from ~3 mg cm^-3 to ~2 g cm^-3), pore volume, pores size (micro to macropores), pore distribution, surface chemical polarity (hydrophobic or hydrophilic), and electrical conductivity (from ~0.5 S m^-1 to S cm^-1). Besides other well explored applications in energy storage or environmental remediation, graphene aerogels have excellent prospects as support for catalysis since they combine the advantages of graphene sheets (high surface area, high electrical conductivity, surface chemistry tunability, high adsorption capacity…) while circumventing their drawbacks such as difficult separation from reaction media or tendency to stacking. Compared to other 3D porous carbon materials used as catalyst support, graphene aerogels have unique porous structure. The pore walls are the thinnest to be expected for a carbon material (the thickness of monolayer graphene is 0.335 nm), hence leading to the highest exposed surface area per weight and even per volume for compacted aerogels. This has the potential to maximize the catalytic site density per reactor mass and volume while minimizing the pressure drop for continuous reactions in flow. Herein, different strategies to control the porous texture, chemical and physical properties are revised along with their processability and scalability for the implementation into different morphologies and devices. Finally, the application of graphene aerogels in the catalysis field are overviewed, giving a perspective about future directions needing further research.

Promoting Electrocatalysis upon Aerogels

Electrocatalysis plays a prominent role in renewable energy conversion and storage, enabling a number of sustainable processes for future technologies. There are generally three strategies to improve the efficiency (or activity) of the electrocatalysts: i) increasing the intrinsic activity of the catalyst itself, ii) improving the exposure of active sites, and iii) accelerating mass transfer during catalysis (both reactants and products). These strategies are not mutually exclusive and can ideally be addressed simultaneously, leading to the largest improvements in activity. Aerogels, as featured by large surface area, high porosity, and self-supportability, provide a platform that matches all the aforementioned criteria for the design of efficient electrocatalysts. The field of aerogel synthesis has seen much progress in recent years, mainly thanks to the rapid development of nanotechnology. Employing precursors with different properties enables the resulting aerogel with targeted catalytic properties and improved performances. Here, the design strategies of aerogel catalysts are demonstrated, and their performance for several electrochemical reactions is reviewed. The common principles that govern electrocatalysis are further discussed for each category of reactions, thus serving as a guide to the development of future aerogel electrocatalysts.

Pt Nanoparticle-Loaded Graphene Aerogel Microspheres with Excellent Methanol Electro-Oxidation Performance

Platinum-decorated graphene aerogel microspheres were fabricated through a combined electrospraying, freeze-casting, and solvothermal process. Platinum nanoparticles with a narrow size distribution are evenly anchored on the graphene aerogel microspheres without agglomeration benefitting from the distinct center-diverging microchannel structure of the graphene aerogel microspheres, which results in the as-prepared catalysts presenting excellent electrocatalytic performance including high electrocatalytic activity and high poison tolerance toward methanol electro-oxidation, showing great potential for direct methanol fuel cell anode catalysts. In particular, the platinum-decorated graphene aerogel microspheres exhibit an extremely high mass activity of 1098.9 mA mg^-1 toward methanol oxidation as well as excellent antipoisoning ability, which are dramatically enhanced compared with Pt particles dispersed on graphene oxide and commercial carbon black supports.

Gas-Flow Tailoring Fabrication of Graphene-like Co-Nx-C Nanosheet Supported Sub-10 nm PtCo Nanoalloys as Synergistic Catalyst for Air-Cathode Microbial Fuel Cells

In this work, we presented a novel, facile, and template-free strategy for fabricating graphene-like N-doped carbon as oxygen reduction catalyst in sustainable microbial fuel cells (MFCs) by using an ion-inducing and spontaneous gas-flow tailoring effect from a unique nitrogen-rich polymer gel precursor which has not been reported in materials science. Remarkably, by introduction of trace platinum- and cobalt- precursor in polymer gel, highly dispersed sub-10 nm PtCo nanoalloys can be in situ grown and anchored on graphene-like carbon. The as-prepared catalysts were investigated by a series of physical characterizations, electrochemical measurements, and microbial fuel cell tests. Interestingly, even with a low Pt content (5.13 wt %), the most active Co/N codoped carbon supported PtCo nanoalloys (Co-N-C/Pt) exhibited dramatically improved catalytic activity toward oxygen reduction reaction coupled with superior output power density (1008 ± 43 mW m^-2) in MFCs, which was 29.40% higher than the state of the art Pt/C (20 wt %). Notability, the distinct catalytic activity of Co-N-C/Pt was attributed to the highly efficient synergistic catalytic effect of Co-Nx-C and PtCo nanoalloys. Therefore, Co-N-C/Pt should be a promising oxygen reduction catalyst for application in MFCs. Further, the novel strategy for graphene-like carbon also can be widely used in many other energy conversion and storage devices.

3D graphene-based hybrid materials: synthesis and applications in energy storage and conversion

Porous 3D graphene-based hybrid materials (3D GBHMs) are currently attractive nanomaterials employed in the field of energy. Heteroatom-doped 3D graphene and metal, metal oxide, and polymer-decorated 3D graphene with modified electronic and atomic structures provide promising performance as electrode materials in energy storage and conversion. Numerous synthesis methods such as self-assembly, templating, electrochemical deposition, and supercritical CO2, pave the way to mass production of 3D GBHMs in the commercialization of energy devices. This review summarizes recent advances in the fabrication of 3D GBHMs with well-defined architectures such as finely controlled pore sizes, heteroatom doping types and levels. Moreover, current progress toward applications in fuel cells, supercapacitors and batteries employing 3D GBHMs is also highlighted, along with the detailed mechanisms of the enhanced electrochemical performance. Furthermore, current critical issues, challenges and future prospects with respect to applications of 3D GBHMs in practical devices are discussed at the end of this review.

Graphene aerogel-supported and graphene quantum dots-modified γ-MnOOH nanotubes as a highly efficient electrocatalyst for oxygen reduction reaction

In this work, we demonstrate a facile strategy to synthesize a novel three-dimensional (3D) graphene aerogel-supported and graphene quantum dots-modified γ-MnOOH nanotubes as a highly efficient electrocatalyst.

One-pot hydrothermal synthesis of platinum nanoparticle-decorated three-dimensional nitrogen-doped graphene aerogel as a highly efficient electrocatalyst for methanol oxidation

Pt nanoparticle-decorated nitrogen-doped 3D graphene aerogel (PtNPs/3DNGA) composites were prepared through a one-pot hydrothermal approach and show superior catalytic activity in methanol oxidation.

Preparation of preferentially exposed poison-resistant Pt(111) nanoplates with a nitrogen-doped graphene aerogel

A poison-resistant and highly catalytically active Pt(111) lattice on ultrathin Pt nanoplates (Pt₍₁₁₁₎NPTs) is obtained with a dense small pore N-atom doped aerogel (NGA) with a large specific surface area and high N content.

Human hair-derived graphene-like carbon nanosheets to support Pt nanoparticles for direct methanol fuel cell application

A novel graphene-like carbon nanosheet (HGCN) with high specific surface area and multimodal pore system was synthesized using human hair as a carbon source for the deposition of PtNPs.

Fabrication of a high density graphene aerogel–gold nanostar hybrid and its application for the electrochemical detection of hydroquinone and o-dihydroxybenzene

We report the first synthesis of a high density graphene aerogel–gold nanostar hybrid with excellent mechanical and electrical properties and its application in the electrochemical detection of hydroquinone and o-dihydroxybenzene.