Manganese oxide nanoflakes/multi-walled carbon nanotubes/chitosan nanocomposite modified glassy carbon electrode as a novel electrochemical sensor for chromium (III) detection

PdRuO2/PVP nanomaterial as a highly selective, stable, and applicable potentiometric sensor for the detection of Cr3

PdRuO2/PVP nanomaterial was synthesized using a straightforward method and characterized using advanced analytical methods such as TEM, XRD, XPS, elemental mapping and SEM. The synthesized PdRuO2/PVP nanomaterial was used as an ionophore in potentiometric sensor electrodes and successfully adapted to Cr3+ ion detection in a large number of aqueous samples. Several experimental parameters of the PdRuO2/PVP sensor such as potentiometric behavior, selectivity, repeatability, response time, pH, titration, and recovery in real samples were investigated. Potentiometric behavioral characteristics were performed in the concentration range 1 × 10-6-1.0 × 10-1 M. The repeated experiments performed six times showed that there was no deviation in the measurements. The limit of detection of the PdRuO2/PVP potentiometric sensor was very low with a value of 8.6 × 10-8 M. The potentiometric measurements showed that the synthesized PdRuO2/PVP ionophore was highly effective in detecting Cr3+ in a wide pH range of 2.0-8.0 and was found to have a shelf life of over 1 year. As a result, the synthesized PdRuO2/PVP electrode material was found to be highly selective, stable, and applicable for Cr3+ detection.

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

Electrochemical determination of thiethylperazine using semi-graphitized carbon nanofibers-MnO nanocomposite

A new voltammetric method is proposed for high sensitive thiethylperazine (THP) determination, using a glassy carbon electrode modified with semi-graphitized carbon nanofibers/MnO nanocomposite (eCNF/MnO/GC). To the best of our knowledge, this is the first electrochemical assay of THP  determination, and the first use of the eCNF/MnO as the electrode modifier. The proposed method using eCNF/MnO/GC is characterized by high repeatability and sensitivity of measurements, with the linearity of THP in the range from 0.05 to 2.2 µmol L-1. The lowest detection limit achieved on the eCNF/MnO/GC electrode for 30 s of preconcentration was 6.3 nmol L-1 THP in 0.05 mol L-1 acetate buffer of  pH 5.6. The proposed method was successfully applied to highly sensitive THP determination in complex matrices, such as tablets and plasma with good recovery (98-103%). The RSD value obtained for THP measurement at a concentration of 0.1 µmol L-1 was 1.3%. Amperometric measurements of THP under the flow injection conditions were also performed to indicate the possibility of its fast and accurate determination (103% and 95% for unmodified and modified electrode, respectively), with the duration of single analysis of approx. 30 s.

Chitosan-the miracle biomaterial as detection and diminishing mediating agent for heavy metal ions: A mini review

Proliferation of heavy metal ions as aquatic pollutants has been a matter of growing concern now a days. Several anthropogenic activities have fueled higher concentration of heavy metal ions in aquatic bodies above threshold values, as set by World Health Organization. Of late, chitosan for its exquisite properties has been widely used in tackling this burning problem of aquatic pollution caused by heavy metal ions. Accordingly, this mini review appraises the detection as well as diminution activities where chitosan plays the major contributing part. Starting from the intrinsic properties of chitosan, the detection strategy via chitosan composites is comprehensively delineated. Likewise, the removal activities via chitosan mediating agents are also overviewed, followed by future recommendations. It is believed that this mini review will give researchers a brief appraisal of two prominent activities related to controlling of heavy metal ion pollution.

Ecological effects, remediation, distribution, and sensing techniques of chromium

Chromium is detected in most ecosystems due to the increased anthropogenic activities in addition to that developed from natural pollution. Chromium contamination in the food chain results due to its persistent and non-degradable nature. The release of chromium in the ecosystem accretes and thereafter impacts different life forms, including humans, aquatic and terrestrial organisms. Leaching of chromium into the ground and surface water triggers several health ailments, such as dermatitis, eczematous skin, allergic reactions, mucous and skin membrane ulcerations, allergic asthmatic reactions, bronchial carcinoma and gastroenteritis. Physiological and biological treatments for the removal of chromium have been discussed in depth in the present communication. Adsorption and biological treatment methods are proven to be alternatives to chemical removal techniques in terms of cost-effectiveness and low sludge formation. Chromium sensing is an alternative approach for regular monitoring of chromium in different water bodies. This review intended to explore different classes of sensors for chromium monitoring. However, the spectrochemical methods are more sensitive in chromium ions sensing than electrochemical methods. Future study should focus on miniaturization for portability and on-site measurements without requiring a large instrument provides a good aspect for future research.

Water toxicants: a comprehension on their health concerns, detection, and remediation

Water is an essential moiety for the human use since a long time. Availability of good-quality water is very essential, as it is used in almost all the industrial, agricultural, and household activities. However, several factors such as increased urbanization and industrialization, extensive use of chemicals, natural weathering of rocks, and human ignorance led to incorporation of enormous toxicants into the water. The water toxicants are broadly classified as inorganic, organic, and radiological toxicants. Inorganic toxicants include heavy metals (As, Cr, Cd, Hg, Ni, Pb) and metalloids, ammonia, nitrate, and fluoride. Uranium is included in radiological toxicants which also causes chemical toxicity. Organic pollutants include polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phenolic compounds, phthalate esters, pesticides, pharmaceutical and personal care products, perchlorates, and flame retardants. These toxicants are harmful for the ecosystem as well as for the human beings causing different types of health complications like lung cancer, nasal cancer, gingivitis, severe vomiting and abdominal pain, hormonal imbalance, skeletal damage, neurotoxicity like Alzheimer and Parkinson disease, renal toxicity, nephrotoxicity, etc. The USEPA and WHO specified the permissible concentration of these pollutants in the drinking water. Determination techniques having high sensitivity, low cost, rapid onsite, and real-time detection of traces of water pollutants are discussed. This review also covers in depth about the remediation techniques, for the control of water toxicants, such as chelation of the heavy metals, intoxication of pollutants using various plants, adsorption of toxicants using different sorbent medias, and photocatalytic breakdown of persistent organic pollutants (POPs).

Direct growth of two-dimensional phthalocyanine-based COF on Cu-MOF to construct a photoelectrochemical-electrochemical dual-mode biosensing platform for high-efficiency determination of Cr(III)

A photoelectrochemical (PEC)-electrochemical (EC) dual-mode biosensing strategy based on COF@MOF heterostructure was developed for efficiently analyzing Cr(III) ions. A two-dimensional phthalocyanine-based COF (CoPc-PT-COF) was in situ grown on a Cu-based MOF (Cu-MOF) substrate via covalent binding between carboxyl groups in Cu-MOF and amino groups in CoPc-PT-COF (denoted as CoPc-PT-COF@Cu-MOF). The coexistence of both phthalocyanine and bipyridine in CoPc-PT-COF@Cu-MOF affords the outperformed electro- and photo-activities, thus serving as a photoelectric beacon with favorable energy-band configuration and amplified electrochemical response. Due to the high porosity and rich functionality of the obtained heterostructure, the DNA strands can be tightly anchored over CoPc-PT-COF@Cu-MOF via diverse interactions. Thanks to the specific recognition between DNA strands and Cr³⁺ ions, the CoPc-PT-COF@Cu-MOF-based biosensor can be used to determine Cr³⁺ ions in an aqueous environment by PEC-EC mode. The gained biosensor shows an extremely low limit of detection (LOD) of 14.5 fM (for PEC) and 22.9 fM (for EC) within the Cr³⁺ concentration range from 0.1 pM to 100 nM, along with high selectivity, good reproducibility and stability. Moreover, this novel biosensor exhibits acceptable applicability for analyzing the trace Cr³⁺ from diverse samples (e.g., river and tap water). As a result, this work provides new insights into the construction of a high-efficiency PEC-EC dual-mode biosensor for detecting heavy metal ions from complex environments.

Gold-silver nanoparticles modified electrochemical sensor array for simultaneous determination of chromium(III) and chromium(VI) in wastewater samples

The oxidation state of ions is a crucial aspect that often has been overlooked when determining the toxicity of chromium (Cr) species in environmental samples. In this study, a novel electrochemical sensor array based on gold-silver nanoparticles modified electrodes was developed for simultaneous determination of the two main chromium species (Cr(III) and (VI)). Specifically, the working electrodes of screen-printed carbon electrodes (SPCEs) were modified with silver-gold bimetallic nanoparticles through electrochemical deposition for detection of Cr(VI). The silver-gold bimetallic nanoparticles were further oxidized to form stable silver-gold bimetallic oxide nanoparticles for the detection of Cr(III). The results showed that the addition of silver with a theoretical value of 1% of gold could contribute to the formation and stabilization of oxides on the surface of gold nanoparticles. After characterization, the two kinds of electrodes were integrated as an electrochemical sensor array for selective and sensitive detection of Cr(VI) and Cr(III). The linear range and limit of detection (LOD, identified by three times of signal-to-noise ratio) were found to be 0.05-5 ppm and 0.1 ppb for Cr(VI), and 0.05-1 ppm and 0.1 ppb for Cr(III), respectively. Finally, the electrochemical sensor array was proven for successful detection of Cr(VI) and Cr(III) in tap water, artificial saliva and artificial sweat samples, and monitoring of Cr(VI) and Cr(III) in chromium-containing wastewater treatment process. Combined with a handheld dual-channel electrochemical device, the simultaneous determination of Cr(VI), Cr(III) and total chromium contents can be easily achieved for various samples.

In situ electro-organic synthesis of hydroquinone using anisole on MWCNT/Nafion modified electrode surface and its heterogeneous electrocatalytic reduction of toxic Cr(vi) species

Owing to its electro-inactive character, anisole (phenylmethyl ether, PhOCH3) and its related derivatives have been used as electrolytes in electrochemistry. Herein, we report a simple one-step electro-organic conversion of PhOCH3 to hydroquinone (HQ) on a pristine-MWCNT-Nafion modified electrode glassy carbon electrode surface, GCE/Nf-MWCNT@HQ, in pH 2 KCl-HCl solution within 15 min of working time. The chemically modified electrode showed a highly redox-active and well-defined signal at an apparent standard electrode potential, E o' = 0.45 V vs. Ag/AgCl (A2/C2) with a surface excess value, Γ HQ = 2.1 × 10-9 mol cm-2. The formation of surface-confined HQ is confirmed by collective physicochemical and spectroscopic characterizations using TEM, UV-Vis, Raman, FTIR, NMR and GC-MS techniques and with several control experiments. Consent about the mechanism, the 2.1% of intrinsic iron present in the pristine-MWCNT is involved for specific complexation with oxygen donor organic molecule (PhOCH3) and hydroxylation in presence of H2O2 (nucleophilic attack) for HQ-product formation. The GCE/Nf-MWCNT@HQ showed an excellent heterogeneous-electrocatalytic reduction of Cr(vi) species in acidic solution with a linear calibration plot in a range, 5-500 ppm at an applied potential, 0.4 V vs. Ag/AgCl with a detection limit, 230 ppb (S/N = 3; amperometric i-t). As a proof of concept, selective detection of toxic Cr(vi) content in the tannery-waste water has been demonstrated with a recovery value ∼100%.

Nanocomposites for Electrochemical Sensors and Their Applications on the Detection of Trace Metals in Environmental Water Samples

The elevated concentrations of various trace metals beyond existing guideline recommendations in water bodies have promoted research on the development of various electrochemical nanosensors for the trace metals' early detection. Inspired by the exciting physical and chemical properties of nanomaterials, advanced functional nanocomposites with improved sensitivity, sensitivity and stability, amongst other performance parameters, have been synthesized, characterized, and applied on the detection of various trace metals in water matrices. Nanocomposites have been perceived as a solution to address a critical challenge of distinct nanomaterials that are limited by agglomerations, structure stacking leading to aggregations, low conductivity, and limited porous structure for electrolyte access, amongst others. In the past few years, much effort has been dedicated to the development of various nanocomposites such as; electrochemical nanosensors for the detection of trace metals in water matrices. Herein, the recent progress on the development of nanocomposites classified according to their structure as carbon nanocomposites, metallic nanocomposites, and metal oxide/hydroxide nanocomposites is summarized, alongside their application as electrochemical nanosensors for trace metals detection in water matrices. Some perspectives on the development of smart electrochemical nanosensors are also introduced.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources

Researchers have recently focused on the advancement of new materials from biorenewable and sustainable sources because of great concerns about the environment, waste accumulation and destruction, and the inevitable depletion of fossil resources. Biorenewable materials have been extensively used as a matrix or reinforcement in many applications. In the development of innovative methods and materials, composites offer important advantages because of their excellent properties such as ease of fabrication, higher mechanical properties, high thermal stability, and many more. Especially, nanocomposites (obtained by using biorenewable sources) have significant advantages when compared to conventional composites. Nanocomposites have been utilized in many applications including food, biomedical, electroanalysis, energy storage, wastewater treatment, automotive, etc. This comprehensive review provides chemistry, structures, advanced applications, and recent developments about nanocomposites obtained from biorenewable sources.

Silver-filled MWCNT nanocomposite as a sensing element for voltammetric determination of sulfamethoxazole

Here, we introduce a new electrode based on Silver-filled multi-walled carbon nanotube (Ag-MWCNT) and methyltrioctyl ammonium chloride (MTOAC) for highly sensitive voltammetric measurement of Sulfamethoxazole (SMX). The electrode showed an electrocatalytic activity as it led to the diminution of the overpotential and an increase in peak current for SMX oxidation in a phosphate buffer solution (pH 6.0). Analysis of surface topography and electrochemical properties of the modified electrode was examined by TEM, EDX and EIS, respectively. Electrochemical performance of the modified electrode was investigated with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques for determination of SMX in aqueous solution. In addition, the oxidation process was found to be dependent on the pH of the buffer solution. Under optimal conditions, a linear relationship between the oxidation current and SMX concentration was found in a range 0.05-70 μM (R² = 0.997) with a detection limit of 0.01 μM after 2 min of accumulating time. The electrode was successfully used to quantify SMX in pharmaceutical formulations and human urine by DPV.

Fluorometric determination of microRNA-155 in cancer cells based on carbon dots and MnO2 nanosheets as a donor-acceptor pair

A fluorometric method is presented for sensitive deternination of microRNA. It is making use of carbon dots (C-dots) loaded with a DNA probe as fluorophore and MnO₂ nanosheets as the quenching agent. The blue-green fluorescence of the DNA-loaded C-dots is quenched by the MnO₂ nanosheets, but restored on binding target microRNA-155. The maximum excitation wavelength and the maximum emission wavelength of C-dots are at 360 nm and 455 nm, respectively. Fluorescence correlates linearly with the log of the microRNA-155 concentration in two ranges, viz. from 0.15 to 1.65 aM and from 1.65 to 20 aM. The detection limit is as low as 0.1 aM. The assay can discriminate between fully complementary and single-base mismatch microRNA. The assay displayed high specificity when used to detect MCF-7 breast cancer cells which can be detected in concentrations from 1000 to 45,000 cells·mL^-1, with a 600 cells·mL^-1 detection limit. The method was applied to the analysis of serum samples spiked with microRNA, and satisfactory results were acquired. Graphical abstract Schematic of a fluorometric sensing platform for miRNA-155. The method relies on a FRET process between C-dots and MnO₂ nanosheets. This strategy has a practical application for detection of miRNA in cell lines and biological fluids.

Fabrication of novel electrochemical sensors based on modification with different polymorphs of MnO2 nanoparticles. Application to furosemide analysis in pharmaceutical and urine samples

A novel MnO2 nanoparticles/chitosan-modified pencil graphite electrode (MnO2 NPs/CS/PGE) was constructed using two different MnO2 polymorphs (γ-MnO2 and ε-MnO2 nanoparticles). X-ray single phases of these two polymorphs were obtained by the comproportionation reaction between MnCl2 and KMnO4 (molar ratio of 5 : 1). The temperature of this reaction is the key factor governing the formation of the two polymorphs. Their structures were confirmed by powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) and energy dispersive X-ray (EDX) analysis. Scanning electron microscopy (SEM) was employed to investigate the morphological shape of MnO2 NPs and the surface of the bare and modified electrodes. Moreover, cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were used for surface analysis of the modified electrodes. Compared to bare PGE, MnO2 NPs/CS/PGE shows higher effective surface area and excellent electrocatalytic activity towards the oxidation of the standard K3[Fe(CN)6]. The influence of different suspending solvents on the electrocatalytic activity of MnO2 was studied in detail. It was found that tetrahydrofuran (THF) is the optimum suspending solvent regarding the peak current signal and electrode kinetics. The results reveal that the modified γ-MnO2/CS/PGE is the most sensitive one compared to the other modified electrodes under investigation. The modified γ-MnO2/CS/PGE was applied for selective and sensitive determination of FUR. Under the optimized experimental conditions, γ-MnO2/CS/PGE provides a linear response over the concentration range of 0.05 to 4.20 μmol L-1 FUR with a low limit of detection, which was found to be 4.44 nmol L-1 (1.47 ng mL-1) for the 1st peak and 3.88 nmol L-1 (1.28 ng mL-1) for the 2nd one. The fabricated sensor exhibits a good reproducibility and selectivity and was applied successfully for the determination of FUR in its dosage forms and in spiked urine samples with good accuracy and precision.

A Rhodamine Derivative Based Chemosensor with High Selectivity and Quick Respond to Cr3+ in Aqueous Solution

In this paper, a new kind of colorimetric chemsensor aiming at detecting Cr³⁺ has been synthesized, and it is based on the "Off-On" effect of a rhodamine derivative. Comparing with other metal irons (Na⁺, K⁺, Ni²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Co²⁺, Cd²⁺, Cu²⁺, Pb²⁺, Zn²⁺, Mg²⁺, Ba²⁺, Ag⁺, Fe²⁺, Ce³⁺), the chemsensor has a quick and accurate response to Cr³⁺ in H₂O-EtOH solution (4/1, v/v). There is an obvious change in color, from colorless to bright pink when Cr³⁺ is detected. According to the fitting curve based on Benesi-Hildebrand equation and working curve of absorption strength in UV-vis spectrum, the binding pattern of Cr³⁺ and the rhodamine derivative follows a 1:1 stoichiometry. The chemsensor shows great potential in monitoring Cr³⁺ in the aqueous medium with high efficiency, which is supposed to complete the recognition in the minimum as 5.2 × 10^-7 mol/L within 5 min.

Ultrasensitive flexible FET-type aptasensor for CA 125 cancer marker detection based on carboxylated multiwalled carbon nanotubes immobilized onto reduced graphene oxide film

The development of a novel flexible and ultrasensitive aptasensor based on carboxylated multiwalled carbon nanotubes (MWCNTs)/ reduced graphene oxide-based field effect transistor (FET) has been reported for label-free detection of the ovarian cancer antigen (CA125). The fabricated sensor has a straightforward design based on the noncovalent attachment of MWCNTs/aptamer conjugated onto few layers reduced graphene oxide nanosheets and its integration with poly-methyl methacrylate (PMMA) as a suitable platform for designing flexible field-effect transistors. The surface properties of the aptasensor were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Under optimal conditions, the proposed aptasensor exhibited a wide linear dynamic range for CA125 (1.0 × 10^-9-1.0 U/mL) with a low detection limit of 5.0 × 10^-10 U/mL. The proposed aptasensor was also successfully applied to detect CA125 in real human serum samples. Furthermore, sensor flexibility is also a challenging area in chemical and biological sensors, especially for portable, wearable, or even implantable sensors, so, the reduced graphene oxide-based FET-type aptasensor showed bendable flexibility on the PMMA substrate. In addition, the aptasensor exhibited high sensitivity, selectivity, stability and reproducibility which offers great promise as a high performance and flexible FET-type aptasensor to detect CA125 and other cancer biomarkers in clinical samples and biological fluids.

Alkaline electrochemical advanced oxidation process for chromium oxidation at graphitized multi-walled carbon nanotubes

Alkaline electrochemical advanced oxidation processes for chromium oxidation and Cr-contaminated waste disposal were reported in this study. The highly graphitized multi-walled carbon nanotubes g-MWCNTs modified electrode was prepared for the in-situ electrochemical generation of HO₂^-. RRDE test results illustrated that g-MWCNTs exhibited much higher two-electron oxygen reduction activity than other nanocarbon materials with peak current density of 1.24 mA cm^-2, %HO₂^- of 77.0% and onset potential of -0.15 V (vs. Hg/HgO). It was originated from the highly graphitized structure and good electrical conductivity as illustrated from the Raman, XRD and EIS characterizations, respectively. Large amount of reactive oxygen species (HO₂^- and ·OH) were in-situ electro-generated from the two-electron oxygen reduction and chromium-induced alkaline electro-Fenton-like reaction. The oxidation of Cr(III) was efficiently achieved within 90 min and the conversion ratio maintained more than 95% of the original value after stability test, offering an efficient and green approach for the utilization of Cr-containing wastes.

Biosensor for detection of dissolved chromium in potable water: A review

The unprecedented deterioration rate of the environmental quality due to rapid urbanization and industrialization causes a severe global health concern to both ecosystem and humanity. Heavy metals are ubiquitous in nature and being used extensively in industrial processes, the exposure to excessive levels could alter the biochemical cycles of living systems. Hence the environmental monitoring through rapid and specific detection of heavy metal contamination in potable water is of paramount importance. Various standard analytical techniques and sensors are used for the detection of heavy metals include spectroscopy and chromatographic methods along with electrochemical, optical waveguide and polymer based sensors. However, the mentioned techniques lack the point of care application as it demands huge capital cost as well as the attention of expert personnel for sample preparation and operation. Recent advancements in the synergetic interaction among biotechnology and microelectronics have advocated the biosensor technology for a wide array of applications due to its characteristic features of sensitivity and selectivity. This review paper has outlined the overview of chromium toxicity, conventional analytical techniques along with a particular emphasis on electrochemical based biosensors for chromium detection in potable water. This article emphasized porous silicon as a host material for enzyme immobilization and elaborated the working principle, mechanism, kinetics of an enzyme-based biosensor for chromium detection. The significant characteristics such as pore size, thickness, and porosity make the porous silicon suitable for enzyme entrapment. Further, several schemes on porous silicon-based immobilized enzyme biosensors for the detection of chromium in potable water are proposed.

Fe(III)-based metal-organic framework-derived core-shell nanostructure: Sensitive electrochemical platform for high trace determination of heavy metal ions

A new core-shell nanostructured composite composed of Fe(III)-based metal-organic framework (Fe-MOF) and mesoporous Fe₃O₄@C nanocapsules (denoted as Fe-MOF@mFe₃O₄@mC) was synthesized and developed as a platform for determining trace heavy metal ions in aqueous solution. Herein, the mFe₃O₄@mC nanocapsules were prepared by calcining the hollow Fe₃O₄@C that was obtained using the SiO₂ nanoparticles as the template, followed by composing the Fe-MOF. The Fe-MOF@mFe₃O₄@mC nanocomposite demonstrated excellent electrochemical activity, water stability and high specific surface area, consequently resulting in the strong biobinding with heavy-metal-ion-targeted aptamer strands. Furthermore, by combining the conformational transition interaction, which is caused by the formation of the G-quadruplex between a single-stranded aptamer and high adsorbed amounts of heavy metal ions, the developed aptasensor exhibited a good linear relationship with the logarithm of heavy metal ion (Pb²⁺ and As³⁺) concentration over the broad range from 0.01 to 10.0nM. The detection limits were estimated to be 2.27 and 6.73 pM toward detecting Pb²⁺ and As³⁺, respectively. The proposed aptasensor showed good regenerability, excellent selectivity, and acceptable reproducibility, suggesting promising applications in environment monitoring and biomedical fields.

A novel fluorescent probe for Cr(3+) based on rhodamine-crown ether conjugate and its application to drinking water examination and bioimaging

A trivalent chromium (Cr(3+)) fluorescence probe (RhC) was designed and synthesized via Schiff base reaction based on rhodamine-crown ether conjugate. This probe displayed a favorable selectivity for Cr(3+) over a range of other common metal ions in DMF/H2O (3:7, v/v; PBS buffer 50 mmol L(-1); pH=6.8) solution, leading to prominent fluorescence "OFF-ON" switching of the rhodamine fluorophore. The limit of detection was calculated to be 1.5 μmol L(-1) (S/N=3). The binding ratio of RhC-Cr(3+) complex was determined to be 1:2 according to the Job's plot and HR-MS. The probe was successfully applied to examination of Cr(3+) in drinking water spiked samples. The average recoveries ranged from 104.9% to 106.9% at spiked concentration level of 10.00 μmol L(-1), and the obtained results were consistent with those obtained using atomic absorption spectrometry (AAS). Moreover, bioimaging experiments showed that RhC can sense the Cr(3+) in living cells with a fluorescence enhancement signal.

Potential prospects for carbon dots as a fluorescence sensing probe for metal ions

The well defined emission properties of CQDs have encouraged further investigation of their prospects in chemo-sensing applications for the identification of Cr³⁺ ions in aqueous media.