Nanocarbon electrode prepared from oppositely charged nanoparticles and nanotubes for low-potential thiocholine oxidation

Fabrication of ITO microelectrodes and electrode arrays using a low-cost CO2 laser plotter

Good electronic (Rs = ∼5 Ω sq-1) and optical properties (transmittance: >83%) make indium tin oxide (ITO) an attractive electrode substrate. Despite the commercial availability of high-quality ITO and some low-cost methods for direct deposition being in use by now, the definition of patterns is still a concern. Putting their popularity and extensive use aside, the manufacturing of ITO electrodes so far lacks a rapid, highly reproducible, flexible, cost-effective, easy patterning process that could surpass difficult, time-consuming techniques such as lithography. Herein, we present a low-cost method based on CO2 laser irradiation for preparing ITO microelectrodes and electrode arrays. Electrodes of different sizes and shapes were examined to identify the performance of the proposed methods. Direct ablation of the ITO layer was optimized for rectangular electrodes of 25, 50, and 100 μm in width, while laser cutting of scotch tape stencils and subsequent wet etching were used to create circular electrodes with a diameter of 1.75 mm. A multielectrode array system consisting 8 of these circular electrodes was fabricated on a (25 × 25) mm2 plate, characterized electrochemically through cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM), and as an example application used for monitoring the anchoring behavior of HeLa and HepG2 cell cultures through cell-based electrochemical impedance spectroscopy. Together, the direct ablation method and preparation of laser cut stencils form a complete toolbox, which allows for low-cost and fast fabrication of ITO electrodes for a wide variety of applications. To demonstrate the general availability of the method, we have also prepared a batch of electrodes using a laser plotter in a local printing shop, achieving high intra-workshop reproducibility.

Klonopin assay using modified electrode with multiwalled carbon nanotubes and poly melamine nanocomposite

Developing of cheap, sensitive and stable sensors plays a significant role in pharmaceutical and clinical applications. Considering the effective role of Klonopin (KNP) in the treatment of epilepsy, KNP quantification in its production process for dose adjustments and checking the purity and also after its usage by patents for bioavailability testing and effectiveness assay is vital. In present work, an efficient electrochemical sensor based on poly melamine and multiwalled carbon nanotubes nanocomposite (PMela/CNTs) was constructed which displayed effective electrochemical response toward KNP. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and square-wave voltammetry (SWV) experiments were applied for performance evaluation of the PMela/CNTs modified electrode and electrochemical redox behavior of KNP. Distinguish synergetic effect was observed between CNTs and poly melamine in response to KNP electrochemical redox reaction. A linear detection range of 0.05 to 10 μM with the detection limits of 63 nM was achieved for KNP analysis. The practical application of the PMela/CNTs modified electrode revealed satisfactory results for quantification of KNP in biological fluids.