MoO 2 @Cu@C Composites Prepared by Using Polyoxometalates@Metal-Organic Frameworks as Template for All-Solid-State Flexible Supercapacitor

AM, Beknalkar SA, Dhas SD, Shin DK. Ni3V2O8 Marigold Structures with rGO Coating for Enhanced Supercapacitor Performance

In this work, Ni3V2O8 (NVO) and Ni3V2O8-reduced graphene oxide (NVO-rGO) are synthesized hydrothermally, and their extensive structural, morphological, and electrochemical characterizations follow subsequently. The synthetic materials' crystalline structure was confirmed by X-ray diffraction (XRD), and its unique marigold-like morphology was observed by field emission scanning electron microscopy (FESEM). The chemical states of the elements were investigated via X-ray photoelectron spectroscopy (XPS). Electrochemical impedance spectroscopy (EIS), Galvanostatic charge-discharge (GCD), and cyclic voltammetry (CV) were used to assess the electrochemical performance. A specific capacitance of 132 F/g, an energy density of 5.04 Wh/kg, and a power density of 187 W/kg were demonstrated by Ni3V2O8-rGO. Key electrochemical characteristics were b = 0.67; a transfer coefficient of 0.52; a standard rate constant of 6.07 × 10-5 cm/S; a diffusion coefficient of 5.27 × 10-8 cm2/S; and a series resistance of 1.65 Ω. By employing Ni3V2O8-rGO and activated carbon, an asymmetric supercapacitor with a specific capacitance of 7.85 F/g, an energy density of 3.52 Wh/kg, and a power density of 225 W/kg was achieved. The series resistance increased from 4.27 Ω to 6.63 Ω during cyclic stability tests, which showed 99% columbic efficiency and 87% energy retention. The potential of Ni3V2O8-rGO as a high-performance electrode material for supercapacitors is highlighted by these findings.

Fabrication of Nitrogen-Doped Carbon-Coated NiS1.97 Quantum Dots for Advanced Magnesium-Ion Batteries

Magnesium (Mg) batteries have garnered considerable interest because of their safety characteristics and low costs. However, the practical application of Mg batteries is hindered by the slow diffusion of Mg ions in the cathode materials. In this study, we prepared NiS1.97 quantum dot composites with nitrogen doping and carbon coating (NiS1.97 QDs@NC) using a one-step sulfurization process with NiO QDs/Ni@NC as the precursor. We applied the prepared NiS1.97 QDs/Ni@NC-based cathodes to Mg batteries because of the large surface area of the quantum dot composite, which provided abundant intercalation sites. This design ensured efficient deintercalation of magnesium ions during charge-discharge processes. The fabricated NiS1.97 QDs@NC displayed a high reversible Mg storage capacity of 259.1 mAh g-1 at 100 mA g-1 and a good rate performance of 96.0 mAh g-1 at 1000 mA g-1. Quantum dot composites with large surface areas provide numerous embedded sites, which ensure effective deintercalation of Mg ions during cycling. Thus, the proposed cathode synthesis strategy is promising for Mg-ion-based energy storage systems.

In Situ Synthesis of Ni-BTC Metal-Organic Framework@Graphene Oxide Composites for High-Performance Supercapacitor Electrodes

In response to serious ecological and environmental problems worldwide, a novel graphene oxide (GO) induction method for the in situ synthesis of GO/metal organic framework (MOF) composites (Ni-BTC@GO) for supercapacitors with excellent performance is presented in this study. For the synthesis of the composites, 1,3,5-benzenetricarboxylic acid (BTC) is used as an organic ligand due to its economic advantages. The optimum amount of GO is determined by a comprehensive analysis of morphological characteristics and electrochemical tests. 3D Ni-BTC@GO composites show a similar spatial structure to that of Ni-BTC, revealing that Ni-BTC could provide an effective framework and avoid GO aggregation. The Ni-BTC@GO composites have a more stable electrolyte-electrode interface and an improved electron transfer route than pristine GO and Ni-BTC. The synergistic effects of GO dispersion and Ni-BTC framework on electrochemical behavior are determined, where Ni-BTC@GO 2 achieves the best performance in energy storage performance. Based on the results, the maximum specific capacitance is 1199 F/g at 1 A/g. Ni-BTC@GO 2 has an excellent cycling stability of 84.47% after 5000 cycles at 10 A/g. Moreover, the assembled asymmetric capacitor exhibits an energy density of 40.89 Wh/kg at 800 W/kg, and it still remains at 24.44 Wh/kg at 7998 W/kg. This material is expected to contribute to the design of excellent GO-based supercapacitor electrodes.

Contributing Factors of Dielectric Properties for Polymer Matrix Composites

Due to the trend of multi-function, integration, and miniaturization of electronics, traditional dielectric materials are difficult to satisfy new requirements, such as balanced dielectric properties and good designability. Therefore, high dielectric polymer composites have attracted wide attention due to their outstanding processibility, good designability, and dielectric properties. A number of polymer composites are employed in capacitors and sensors. All these applications are directly affected by the composite's dielectric properties, which are highly depended on the compositions and internal structure design, including the polymer matrix, fillers, structural design, etc. In this review, the influences of matrix, fillers, and filler arrangement on dielectric properties are systematically and comprehensively summarized and the regulation strategies of dielectric loss are introduced as well. Finally, the challenges and prospects of high dielectric polymer composites are proposed.

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors

By only changing the ratio of Mo to S source, a distinctive single phase MoO2 or MoS2 and MoO2/MoS2 nanocomposites (NCs) are obtained through a simple one-step hydrothermal method based on CH4N2S as a sulfur source and (NH4)6Mo7O24·4H2O as a source of Mo in oxalic acid. The effect of ratio of Mo to S source on the composition, structure, and electrochemical performance are systematically researched. Due to its unique design, abundant macropores active sites in MoO2/MoS2 NCs induce superior rate property (55.30% capacitance retention to 20 from 1 A g-1) and larger specific capacitance (1667.3 F g-1 at 1 A g-1) and longer cycle life (94.75% after 5000 cycles) as used directly as an electrode. Furthermore, at a power density of 225 W kg-1, a maximal energy density of 21.85 Wh kg-1 is provided by the asymmetric supercapacitor (MoO2/MoS2//AC). The capacitance of asymmetric supercapacitor (ASC) is remarkably enhanced by 129.02% under 5000 cycles at a current density of 1.5 A g-1, demonstrating outstanding cycle property. These results imply the prepared MoO2/MoS2 NCs have promising applications in advanced energy storages. It is important and should be noted that NCs of oxide and sulfide are prepared with only a simple one-step process.

Architecting Nanostructured Co-BTC@GO Composites for Supercapacitor Electrode Application

Herein, we present an innovative graphene oxide (GO)-induced strategy for synthesizing GO-based metal-organic-framework composites (Co-BTC@GO) for high-performance supercapacitors. 1,3,5-Benzene tricarboxylic acid (BTC) is used as an inexpensive organic ligand for the synthesis of composites. An optimal GO dosage was ascertained by the combined analysis of morphology characterization and electrochemical measurement. The 3D Co-BTC@GO composites display a microsphere morphology similar to that of Co-BTC, indicating the framework effect of Co-BTC on GO dispersion. The Co-BTC@GO composites own a stable interface between the electrolyte and electrodes, as well as a better charge transfer path than pristine GO and Co-BTC. A study was conducted to determine the synergistic effects and electrochemical behavior of GO content on Co-BTC. The highest energy storage performance was achieved for Co-BTC@GO 2 (GO dosage is 0.02 g). The maximum specific capacitance was 1144 F/g at 1 A/g, with an excellent rate capability. After 2000 cycles, Co-BTC@GO 2 maintains outstanding life stability of 88.1%. It is expected that this material will throw light on the development of supercapacitor electrodes that hold good electrochemical properties.

POMCPs with Novel Two Water-Assisted Proton Channels Accommodated by MXenes for Asymmetric Supercapacitors

To develop high-performance supercapacitors, the negative electrode is at present viewed as one of the most challenging tasks for obtaining the next-generation of energy storage devices. Therefore, in this study, a polyoxometalate-based coordination polymer [Zn(itmb)₃ H₂ O][H₂ SiW₁₂ O₄₀ ]·5H₂ O (1) is designed and prepared by a simple hydrothermal method for constructing a high-capacity negative electrode. Polymer 1 has two water-assisted proton channels, which are conducive to enhancing the electrical conductivity and storage capacity. Then, MXene Ti₃ C₂ T_x is chosen to accommodate coordination polymer 1 as the interlayer spacers to improve the conductivity and cycling stability of 1, while preventing the restacking of MXene. Expectedly, the produced composite electrode 1@Ti₃ C₂ T_x shows an excellent specific capacitance (1480.1 F g^-1 at 5 A g^-1 ) and high rate performance (a capacity retention of 71.5% from 5 to 20 A g^-1 ). Consequently, an asymmetric supercapacitor device is fabricated using 1@Ti₃ C₂ T_x as the negative electrode and celtuce leaves-derived carbon paper as the positive electrode, which demonstrates ultrahigh energy density of 32.2 Wh kg^-1 , and power density 2397.5 W kg^-1 , respectively. In addition, the ability to illuminate a red light-emitting diode for several minutes validates its feasibility for practical application.

Metal organic framework derived porous carbon materials excel as an excellent platform for high-performance packaged supercapacitors

Designing and synthesizing new materials with special physical and chemical properties are the key steps to assembling high performance supercapacitors. Metal organic framework (MOF) derived porous carbon materials have drawn great attention in supercapacitors because of their large specific surface area, high chemical/thermal stability and tunable pore structure. Thus, the recent development of porous carbon as an electrode material for supercapacitors is reviewed. The types, design and synthesis strategies of porous carbon are systematically summarized. This review will be divided into three main parts: (1) the design and synthesis of MOF precursors and templates for MOF-derived porous carbon materials; (2) the application of different types of MOF-derived carbon in supercapacitors; and (3) the design of typical structures of porous carbon composites for supercapacitors. Finally, the problems and challenges confronted when using porous carbon are assessed and elaborated, and some suggestions on future research directions are proposed.

MoO2 nanoparticles confined in N,P-codoped graphene aerogels with excellent pseudocapacitance performance

In this work, MoO2@NPGA nanocomposites were successfully prepared via a simple hydrothermal and calcination route. The as-prepared MoO2@NPGA composites exhibit a synergistic effect between MoO2 and N,P-codoped graphene aerogels, which can significantly improve the electrochemical performance of the MoO2@NPGA electrodes. Moreover, the results also proved that the mass loading of MoO2 has a huge effect on the electrochemical properties of MoO2@NPGA composites. With an appropriate amount of MoO2, the MoO2@NPGA composite shows a high specific capacitance (335 F g−1 at 1 A g−1) and excellent cycle stability (capacitance remains at 88% after 6000 cycles). Furthermore, the assembled symmetric supercapacitor displays a high energy density of 23.75 W h kg−1 at a power density of 300 W kg−1 and can maintain an energy density of 17.1 W h kg−1 when the power density reaches up to 6005 W kg−1.

Novel neuron-network-like Cu-MoO2/C composite derived from bimetallic organic framework for highly efficient detection of hydrogen peroxide

Fabrication of non-enzymatic electrochemical sensors based on metal oxides with low valence-state for nanomolar detection of H₂O₂ has been a great challenge. In this work, a novel neuron-network-like Cu-MoO₂/C hierarchical structure was simply prepared by in-situ pyrolysis of 3D bimetallic-organic framework [Cu(Mo₂O₇)L]_n [L: N-(pyridin-3-ylmethyl)pyridine-2-amine] crystals. Meanwhile, the MoO₂/C nano-aggregates were also obtained by liquid phase copper etching. Subsequently, two non-enzymatic electrochemical sensors were fabricated by simple drop-coating of the above two materials on the surface of glassy carbon electrode (GCE). Electrochemical measurements indicate that the Cu-MoO₂/C/GCE possesses highly efficient electrocatalytic H₂O₂ property during wider linear range of 0.24 μM-3.27 mM. At room temperature, the Cu-MoO₂/C composite displays higher sensitivity (233.4 μA mM^-1 cm^-2) and lower limit of detection (LOD = 85 nM), which are 1 and 2.5 times larger than those of MoO₂/C material, respectively. Such excellent ability for trace H₂O₂ detection mainly originates from the synergism of neuron-network-like structure, enhanced electrical conductivity and increased active sites caused by low valence-state MoO₂ and co-doping of Cu and carbon, and even the interaction between Cu and Mo. In addition, the H₂O₂ detection in spiked human serum and commercially real samples indicates that the Cu-MoO₂/C/GCE sensor has certain potential application in the fields of environment and biology.

Porous Carbon-Based Supercapacitors Directly Derived from Metal-Organic Frameworks

Numerously different porous carbons have been prepared and used in a wide range of practical applications. Porous carbons are also ideal electrode materials for efficient energy storage devices due to their large surface areas, capacious pore spaces, and superior chemical stability compared to other porous materials. Not only the electrical double-layer capacitance (EDLC)-based charge storage but also the pseudocapacitance driven by various dopants in the carbon matrix plays a significant role in enhancing the electrochemical supercapacitive performance of porous carbons. Since the electrochemical capacitive activities are primarily based on EDLC and further enhanced by pseudocapacitance, high-surface carbons are desirable for these applications. The porosity of carbons plays a crucial role in enhancing the performance as well. We have recently witnessed that metal-organic frameworks (MOFs) could be very effective self-sacrificing templates, or precursors, for new high-surface carbons for supercapacitors, or ultracapacitors. Many MOFs can be self-sacrificing precursors for carbonaceous porous materials in a simple yet effective direct carbonization to produce porous carbons. The constituent metal ions can be either completely removed during the carbonization or transformed into valuable redox-active centers for additional faradaic reactions to enhance the electrochemical performance of carbon electrodes. Some heteroatoms of the bridging ligands and solvate molecules can be easily incorporated into carbon matrices to generate heteroatom-doped carbons with pseudocapacitive behavior and good surface wettability. We categorized these MOF-derived porous carbons into three main types: (i) pure and heteroatom-doped carbons, (ii) metallic nanoparticle-containing carbons, and (iii) carbon-based composites with other carbon-based materials or redox-active metal species. Based on these cases summarized in this review, new MOF-derived porous carbons with much enhanced capacitive performance and stability will be envisioned.

Flexible supercapacitor electrodes using metal-organic frameworks

Advancements in the field of flexible and wearable devices require flexible energy storage devices to cater their power demands. Metal-ion batteries (such as lithium-ion batteries, sodium-ion batteries, etc.) and electrochemical capacitors (also called supercapacitors or ultracapacitors) have achieved great interest in the recent past due to their superior energy storage characteristics like high power density and long cycle life. A major bottleneck of using metal-ion batteries in wearable devices is their lack of flexibility. Low power density, toxicity and flammability due to organic electrolytes inhibit them from safe on-body device applications. On the other hand, supercapacitors can be made with aqueous electrolytes, making them a safer alternative for wearable applications. Metal-organic frameworks (MOFs) are novel candidates as electrode materials due to their salient features such as large surface area, three-dimensional porous architecture, permeability to foreign entities, structural tailorability, etc. Though pristine MOFs suffer from poor intrinsic conductivity, this can be rectified by preparing composites with other electronically conducting materials. MOF-based electrodes are highly promising for flexible and wearable supercapacitors since they exhibit good energy and power densities. This review focuses on the new developments in the field of MOF-based composite electrodes for developing flexible supercapacitors.

Strategies for Incorporating Catalytically Active Polyoxometalates in Metal-Organic Frameworks for Organic Transformations

Polyoxometalates (POMs) can benefit from immobilization on solid supports to overcome their difficulty in processability and stability. Among the reported solid supports, metal-organic frameworks (MOFs) offer a crystalline, versatile platform for depositing highly active POMs. The combination of these structures can at times benefit from the combined reactivity of both the POM and MOF, sometimes synergistically, to improve catalysis while balancing desirable properties like porosity, substrate diffusion, or stability. In this Review, we survey the strategies for immobilizing POMs within MOF structures, with an emphasis on how physical and catalytic properties of the parent materials are affected in the composite when employed in organic transformations.

Enhanced pseudocapacitive energy storage properties of budding-branch like MoO2@C/CNT nanorods

Despite its high theoretical capacitance, molybdenum dioxide still cannot be well applied in supercapacitors due to its low conductivity and structural instability. Generally, compositing molybdenum dioxides with carbon materials can provide new possibilities. In this work, we successfully fabricated a budding-branch like MoO2@C composite wrapped by carbon nanotubes (CNTs). Different from those MoO2 nanodots synthesized by traditional approaches, the MoO2 nanodots in this composite were distributed uniformly inside the carbon rods, which effectively alleviated their self-aggregation and benefited their electron transportation. The introduction of the CNTs further provided the composite with better contact with the electrolyte and increased charge transfer. The prepared MoO2@C/CNT electrode exhibits a superior specific capacitance of 1667.2 F g-1 at 1 A g-1 and an excellent reversibility of 92.8% capacitance retention after 3000 cycles. Furthermore, asymmetric supercapacitor devices based on the MoO2@C/CNT composite and active carbon were assembled, which showed promising electrochemical properties at an extended operating voltage of 1.4 V and could light a green LED device for 15 minutes after charging for 30 s.

Enhanced electrochemical performance of α-MoO3/graphene nanocomposites prepared by an in situ microwave irradiation technique for energy storage applications

Nanoparticles of α-molybdenum oxide (α-MoO₃) are directly grown on graphene sheets using a surfactant-free facile one step ultrafast in situ microwave irradiation method.

Metal–organic frameworks with different spatial dimensions for supercapacitors

Recent progress in MOF materials for SCs with different spatial dimensions, such as 2D MOFs, including conductive MOFs and nanosheets, and 3D MOFs, categorized as single metallic and multiple metallic MOFs, are reviewed.

Engineering thermally activated NiMoO4 nanoflowers and biowaste derived activated carbon-based electrodes for high-performance supercapatteries

NiMoO₄ nanoflowers having pure crystalline phases with slight amorphous surface exhibited excellent battery-like electrochemical performance and potential for supercapattery positive electrodes.

Polyoxometalates-Based Metal-Organic Frameworks Made by Electrodeposition and Carbonization Methods as Cathodes and Anodes for Asymmetric Supercapacitors

Hybrid materials have obtained well-deserved attention for energy storage devices, because they show high capacitances and high energy densities induced by the synergistic effect between complementary components. Polyoxometalate-based metal-organic frameworks (POMOFs) possess the abundant redox-active sites and ordered structures of polyoxometalates (POMs) and metal-organic frameworks (MOFs), respectively. Here, an asymmetric supercapacitor (ASC) NENU-5/PPy/60//FeMo/C was fabricated in which both its electrodes are prepared from POMOF precursors. A typical POMOF material, NENU-5, was first connected with polypyrrole (PPy) through electrodeposition to form the cathode material NENU-5/PPy. Another representative POMOFs material, PMo₁₂ @MIL-100, was carbonized to obtain the anode material FeMo/C. Cathode NENU-5/PPy exhibited an extraordinary capacitance of 508.62 F g^-1 (areal capacitance: 2034.51 mF cm^-2 ). In addition, anode FeMo/C shows excellent cyclic stability attributed to its unique structure. Finally, benefiting from the outstanding capacitances and structural merits of the anode and cathode, assembled asymmetric supercapacitor NENU-5/PPy/60//FeMo/C achieves an energy density of 1.12 mWh cm^-3 at a power density output of 27.78 mW cm^-3 , as well as a notable life of 10 000 cycles with an capacity retention of 80.62 %. Thus, the unique ASC is strongly competitive in high capacitance, long cycle life, and high energy-required energy storage devices.

3D hierarchical porous CuS flower-dispersed CNT arrays on nickel foam as a binder-free electrode for supercapacitors

To fabricate excellent electrochemical supercapacitors, 3D porous copper sulfide flower dispersed carbon nanotube on nickel foam (CuS–CNTs@NF) with high energy density and stability were synthesized via a simple one-step solvothermal method.

One-pot facile simultaneous in situ synthesis of conductive Ag–polyaniline composites using Keggin and Preyssler-type phosphotungstates

Two heteropolytungstate structures, Keggin (H₃PW₁₂O₄₀) and Preyssler (H₁₄[NaP₅W₃₀O₁₁₀]), were used to synthesize conductive silver nanoparticle–polyaniline–heteropolytungstate (AgNPs–PAni–HPW) nanocomposites. During the oxidative polymerization of aniline, heteropolyblue was generated and served as the reducing agent to stabilize and distribute AgNPs within “PAni–Keggin” and “PAni–Preyssler” matrixes as well as on their surfaces. The prepared nanocomposites and AgNPs were characterized using UV-visible (UV-Vis) and Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), pore size distribution BET, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). UV-Vis results showed different stages of the formation of metal NPs embedded in the polymer–HPW composites, and FT-IR spectra presented characteristic bands of PAni, Keggin and Preyssler anions in the composites confirming no changes in their structures. The presence of AgNPs and an intensely crystalline matrix were confirmed by the XRD pattern. The BET surface areas were found to be 38.426 m² g⁻¹ for “AgNPs–PAni–Keggin” and 29.977 m² g⁻¹ for “AgNPs–PAni–Preyssler” nanocomposites with broad distributions of meso-porous structure for both nanocomposites. TEM and SEM images confirmed that the type of heteropolyacids affected the size of AgNPs. This is the first report that uses Keggin and Preyssler-type heteropolytungstate to synthesize “AgNPs–PAni–HPW” nanocomposites in an ambient condition through a low-cost, facile, one-pot, environmentally friendly and simultaneous in situ oxidative polymerization protocol.

Two heteropolytungstate structures, (a) Keggin (H₃PW₁₂O₄₀) and (b) Preyssler (H₁₄(NaP₅W₃₀O₁₁₀]), have been used to synthesize conductive silver nanoparticle–polyaniline–heteropolytungstate, (AgNPs–PAni–HPW) nanocomposites.

Quantum-Dot-Mediated Controlled Synthesis of Dual Oxides of Molybdenum from MoS2 : Quantification of Supercapacitor Efficacy

The versatile technological applications of molybdenum oxides requires the efficient synthesis of various stoichiometric molybdenum oxides. Thus, herein, a controlled method to synthesize both MoO₃ and MoO₂ from MoS₂ via quantum dot intermediates is reported. Microscopic, spectroscopic, and X-ray studies corroborate the formation of orthorhombic α-MoO₃ with a microbelt structure and monoclinic MoO₂ nanoparticles that self-assemble into hollow tubes. Quantitative investigations into charge-storage kinetics reveal that MoO₂ exhibits an excellent pseudocapacitive response up to a mass loading of 5 mg cm^-2 with an areal capacity of 327.2 mC cm^-2 at 5 mV s^-1 , with 41.9 % retention at 100 mV s^-1 . In contrast, above a mass loading of 0.5 mg cm^-2 , the charge-storage nature of MoO₃ electrodes switches from that of a supercapacitor to battery type. At a sweep rate of 50 mV s^-1 , 87.2 % of the total charge is contributed by a capacitive response in a 1 mg cm^-2 MoO₂ electrode. The charge-storage kinetics of MoO₃ and MoO₂ reflect on the respective asymmetric supercapacitors. A MoO₂ //graphite asymmetric supercapacitor holds an outstanding energy density of 341 mW h m^-2 at a power density of 4949 mW m^-2 and delivers an ultrahigh power density of 28140 mW m^-2 with an energy density 142 mW h m^-2 and energy efficiency of 87 %.

High-Performance Flexible Quasi-Solid-State Supercapacitors Realized by Molybdenum Dioxide@Nitrogen-Doped Carbon and Copper Cobalt Sulfide Tubular Nanostructures

Flexible quasi-/all-solid-state supercapacitors have elicited scientific attention to fulfill the explosive demand for portable and wearable electronic devices. However, the use of electrode materials faces several challenges, such as intrinsically slow kinetics and volume change upon cycling, which impede the energy output and electrochemical stability. This study presents well-aligned molybdenum dioxide@nitrogen-doped carbon (MoO2@NC) and copper cobalt sulfide (CuCo2S4) tubular nanostructures grown on flexible carbon fiber for use as electrode materials in supercapacitors. Benefiting from the chemically stable interfaces, affluent active sites, and efficient 1D electron transport, the MoO2@NC and CuCo2S4 nanostructures integrated on conductive substrates deliver excellent electrochemical performance. A flexible quasi-solid-state asymmetric supercapacitor composed of MoO2@NC as the negative electrode and CuCo2S4 as the positive electrode achieves an ultrahigh energy density of 65.1 W h kg-1 at a power density of 800 W kg-1 and retains a favorable energy density of 27.6 W h kg-1 at an ultrahigh power density of 12.8 kW kg-1. Moreover, it demonstrates good cycling performance with 90.6% capacitance retention after 5000 cycles and excellent mechanical flexibility by enabling 92.2% capacitance retention after 2000 bending cycles. This study provides an effective strategy to develop electrode materials with superior electrochemical performance for flexible supercapacitors.

Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all-carbon electrode materials are prepared by assembling N-doped graphene quantum dots (N-GQDs) on carbonized MOF materials (cZIF-8) interweaved with carbon nanotubes (CNTs) for flexible all-solid-state supercapacitors. In this ternary electrode, cZIF-8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N-GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N-GQD@cZIF-8/CNT electrodes exhibit a high specific capacitance of 540 F g^-1 at 0.5 A g^-1 in a 1 m H₂ SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^-1 with a power density of 108.7 W kg^-1 . Meanwhile, three supercapacitors connected in series can power light-emitting diodes for 20 min. All-solid-state N-GQD@cZIF-8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^-1 with a power density of 89.3 W kg^-1 , while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high-performance energy storage devices via the rational design.

Metal–Organic Framework Hybrid Materials and Their Applications

The inherent porous nature and facile tunability of metal–organic frameworks (MOFs) make them ideal candidates for use in multiple fields. MOF hybrid materials are derived from existing MOFs hybridized with other materials or small molecules using a variety of techniques. This led to superior performance of the new materials by combining the advantages of MOF components and others. In this review, we discuss several hybridization methods for the preparation of various MOF hybrids with representative examples from the literature. These methods include covalent modifications, noncovalent modifications, and using MOFs as templates or precursors. We also review the applications of the MOF hybrids in the fields of catalysis, drug delivery, gas storage and separation, energy storage, sensing, and others.

MOF-Derived Metal Oxide Composites for Advanced Electrochemical Energy Storage

Over the past two decades, metal-organic frameworks (MOFs), a type of porous material, have aroused great interest as precursors or templates for the derivation of metal oxides and composites for the next generation of electrochemical energy storage applications owing to their high specific surface areas, controllable structures, and adjustable pore sizes. The electrode materials, which affect the performance in practical applications, are pivotal components of batteries and supercapacitors. Metal oxide composites derived from metal-organic frameworks possessing high reversible capacity and superior rate and cycle performance are excellent electrode materials. In this Review, potential applications for MOF-derived metal oxide composites for lithium-ion batteries, sodium-ion batteries, lithium-oxygen batteries, and supercapacitors are studied and summarized. Finally, the challenges and opportunities for future research on MOF-derived metal oxide composites are proposed on the basis of academic knowledge from the reported literature as well as from experimental experience.

Towards flexible solid-state supercapacitors for smart and wearable electronics

Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.

Three-dimensional supramolecular phosphomolybdate architecture-derived Mo-based electrocatalytic system for overall water splitting

With phosphomolybdate supramolecular architecture-derived Mo₂C@NC and MoO₂@NC as cathode and anode, an efficient electrolyzer was constructed, which possessed excellent overall water splitting activity.

Metal-Organic Framework-Derived Nanoporous Metal Oxides toward Supercapacitor Applications: Progress and Prospects

Transition metal oxides (TMOs) have attracted significant attention for energy storage applications such as supercapacitors due to their good electrical conductivity, high electrochemical response (by providing Faradaic reactions), low manufacturing costs, and easy processability. Despite exhibiting these attractive characteristics, the practical applications of TMOs for supercapacitors are still relatively limited. This is largely due to their continuous Faradaic reactions, which can lead to major changes or destruction of their structure as well phase changes (in some cases) during cycling, leading to the degradation in their capacitive performance over time. Hence, there is an immediate need to develop new synthesis methods, which will readily provide stable porous architectures, controlled phase, as well as useful control over dimensions (1-D, 2-D, and 3-D) of the metal oxides for improving their performance in supercapacitor applications. Since its discovery in late 1990s, metal-organic frameworks (MOFs) have influenced many fields of material science. In recent years, they have gained significant attention as precursors or templates for the derivation of porous metal oxide nanostructures and nanocomposites for next-generation supercapacitor applications. Even though these materials have widespread applications and have been widely studied in terms of their structural features and synthesis, it is still not clear how these materials will play an important role in the development of the supercapacitor field. In this review, we will summarize the recent developments in the field of MOF-derived porous metal oxide nanostructures and nanocomposites for supercapacitor applications. Furthermore, the current challenges along with the future trends and prospects in the application of these materials for supercapacitors will also be discussed.

Supercapacitor electrode materials with hierarchically structured pores from carbonization of MWCNTs and ZIF-8 composites

Due to their high specific surface area and good electric conductivity, nitrogen-doped porous carbons (NPCs) and carbon nanotubes (CNTs) have attracted much attention for electrochemical energy storage applications. In the present work, we firstly prepared MWCNT/ZIF-8 composites by decoration of zeolitic imidazolate frameworks (ZIF-8) onto the surface of multi-walled CNTs (MWCNTs), then obtained MWCNT/NPCs by the direct carbonization of MWCNT/ZIF-8. By controlling the reaction conditions, MWCNT/ZIF-8 with three different particle sizes were synthesized. The effect of NPCs size on capacitance performance has been evaluated in detail. The MWCNT/NPC with large-sized NPC (MWCNT/NPC-L) displayed the highest specific capacitance of 293.4 F g^-1 at the scan rate of 5 mV s^-1 and only lost 4.2% of capacitance after 10 000 cyclic voltammetry cycles, which was attributed to the hierarchically structured pores, N-doping and high electrical conductivity. The studies of symmetric two-electrode supercapacitor cells also confirmed MWCNT/NPC-L as efficient electrode materials that have good electrochemical performance, especially for high-rate applications.

Metal–organic frameworks based on halogen-bridged dinuclear-Cu-nodes as promising materials for high performance supercapacitor electrodes

Two halogen-bridged di-nuclear Cu-based 3D porous frameworks present high specific capacitance and good cycling stability.

A coordination polymer based on dinuclear (pyrazinyl tetrazolate) copper(ii) cations and Wells–Dawson anions for high-performance supercapacitor electrodes

A new POM-based coordination polymer was used as supercapacitor electrode showing excellent performance, which can effectively solve the water solubility and low conductivity of traditional POM electrodes.

Synthesis and photo-/electro-catalytic properties of a 3D POMOF material based on an interpenetrated copper coordination polymer linked by in situ dual ligands and Dawson-type phosphotungstates

A 3D Keggin POMOF based on a unique Cu/pz/pzc MOF was prepared and employed to degradation of typical dyes.