Controlled synthesis of reduced graphene oxide supported silver nanoparticles for selective and sensitive electrochemical detection of 4-nitrophenol

A diazonium-functionalized silver electrode for the sensitive amperometric detection of p-nitrophenol in water over a wide range of concentrations

This work presents a novel approach for the electrochemical detection of p-nitrophenol (pNP) focusing on the development of a simple and efficient strategy to overcome pNP adsorption. The proposed method involves the functionalization of a silver (Ag) electrode with an electrografted, thin diazonium film. After characterization by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry, the as-functionalized electrode allowed a wide linear detection range to be established in aqueous solutions, spanning from 1 to 500 μM pNP. This outcome indicates that the diazonium film effectively addresses any issues related to adsorption with good repeatability and reproducibility. Furthermore, the sensor's analytical performances were evaluated yielding a sensitivity and a limit of detection of 0.3819 μA cm-2 μM-1 and 600 nM, respectively. The sensor was also found to exhibit a good selectivity towards pNP and phenolic compounds and was successfully tested on a real water sample.

Using silver nanoparticle-decorated whey protein isolate amyloid fibrils to modify the electrode surface used for electrochemical detection of para-nitrophenol

Due to their organized structures, remarkable stiffness, and nice biocompatibility and biodegradability, amyloid fibrils serve as building blocks for versatile sustainable materials. Silver nanoparticles (AgNPs) are commonly used as the nano-catalysts for various electrochemical reactions. Given their large specific surface area and high surface energy, AgNPs exhibit high aggregation propensity, which hampers their electrocatalytic performance. Food protein wastes have been identified to be associated with climate change and environmental impacts, and a surplus of whey proteins in dairy industries causes high biological and chemical demands, and greenhouse gas emissions. This study is aimed at constructing sustainable electrode surface modifiers using AgNP-deposited whey protein amyloid fibrils (AgNP/WPI-AFs). AgNP/WPI-AFs were synthesized and characterized via spectroscopic techniques, electron microscopy, and X-ray diffraction. Next, the electrocatalytic performance of AgNP/WPI-AF modified electrode was assessed via para-nitrophenol (p-NP) reduction combined with various electrochemical analyses. Moreover, the reaction mechanism of p-NP electrocatalysis on the surface of AgNP/WPI-AF modified electrode was investigated. The detection range, limit of detection, sensitivity, and selectivity of the AgNP/WPI-AF modified electrode were evaluated accordingly. This work not only demonstrates an alternative for whey valorization but also highlights the feasibility of using amyloid-based hybrid materials as the electrode surface modifier for electrochemical sensing purposes.

Synthesis and characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres for potential application as a promising catalyst for nitrophenol reduction

Nitrophenols, which are defined as an important toxic and carcinogenic pollutant in agricultural and industrial wastewater due to their solubility in water, form of resistance against all organisms in water resources. It is vital that these compounds, which are highly toxic as well as highly explosive, are removed from the aquatic ecosystem. In this paper, we reported the preparation and advanced characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres (Pd0@nano-HAp). The catalytic efficiency of the Pd0@nano-HAp catalyst was examined in the reduction of nitrophenols in water in the presence of NaBH4 as reducing agent and the great activity of catalyst have been specified against 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol and 2,4,6-trinitrophenol compounds with 70.6, 82.4, 27.6 and 41.4 min-1 TOFinitial values, respectively. Another important point is that the Pd0@nano-HAp catalyst has perfect reusability performance (at 5th reuse between 68.5 and 92.8 %) for the reduction of nitrophenols. In addition, catalytic studies were carried out at different temperatures in order to determine thermodynamic parameters such as Ea, ΔH≠ and ΔS≠.

Construction of an electrochemical sensor towards environmental hazardous 4-nitrophenol based on Nd(OH)3-embedded VSe2 nanocomposite

The toxicity of 4-nitrophenol (4-NP) is one of the most common threats to the environment; therefore, developing a simple and sensitive analytical method to detect 4-NP is crucial. In this study, we prepared the Nd(OH)3/VSe2 nanocomposite using the simple hydrothermally assisted ultrasonication method and it was used to detect the 4-NP. Different characterization techniques were used to investigate the morphological and chemical compositions of Nd(OH)3/VSe2 nanocomposite. All of these investigations revealed that Nd(OH)3 nanoparticles were finely dispersed on the surface of the VSe2 nanosheet. The electrical conductivity of our prepared samples was evaluated by the electrochemical impedance spectroscopic technique. The CV and DPV methods were used to explore the electrochemical activity of 4-NP at the Nd(OH)3/VSe2/GCE sensor which exhibited a wide linear range (0.001 to 640 µM), low limit of detection (0.008 µM), and good sensitivity (0.41 µA µM-1 cm-2), respectively. Additionally, Nd(OH)3/VSe2/GCE sensor was tested in water samples for the detection of 4-NP, which exhibited good recovery results. The Nd(OH)3/VSe2 electrode material is a novel one for the electrochemical sensor field, and the obtained overall results also proved that our proposed material is an active material for sensor applications.

CuO nanoleaf and β-cyclodextrin functionalized reduced graphene oxide: a highly selective and sensitive electrochemical sensor for the simultaneous detection of 2-chlorophenol and 2, 4-dichlorophenol

Chlorophenols are considered priority pollutants and are harmful to humans and the environment; consequently, sensitive, and selective detection of chlorophenols is very significant. In the present article, a glassy carbon electrode was modified by copper oxide nanoleaves, β-cyclodextrin, and reduced graphene oxide through an electrostatic self-assembly method (CuO NLs-β-CD-rGO-GCE) and successfully utilized for the selective and sensitive detection of 2-chlorophenol (2-CP) and 2,4-dichlorophenol (2,4-DCP). The modified electrodes were characterized by using SEM, EDX, ATR-FTIR, CV, and EIS. The electrochemical behaviour of 2-CP and 2,4 DCP on different modified electrodes was investigated by cyclic voltammetry whereas differential pulse voltammetry was used for the quantitative determination of chlorophenols. Under the optimized conditions, the anodic peak current displayed a good linear relationship to concentration in the range of 5 to 50 μM for 2-CP and 5 to 30 μM for 2,4-DCP, with detection limits of 0.22 nM and 0.52 nM, respectively. Moreover the proposed sensor exhibited good reproducibility, high sensitivity, and long term stability. To further study the practical applicability of the newly developed sensor, the modified electrode was successfully used to determine 2-CP and 2,4-DCP in a water sample with good recovery.

Recent advances in electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs) for sensing pharmaceutical and food pollutants

Foodborne-related infections due to additives and pollutants pose a considerable task for food processing enterprises. Therefore, the competent, cost-effective, and quick investigation of nutrition additives and contaminants is essential to reduce the threat of public fitness problems. The electrochemical sensor (ECS) shows facile and potent analytical approaches desirable for food protection and quality inspection over traditional methods. The consequence of a broad display of nanomaterials has paved the path for their relevance in designing high-performance ECSs appliances for medical diagnostics and conditions and food protection. This review article has discussed the importance of electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs). Initially, we have demonstrated the types of pharmaceutical and food/agriculture pollutants (such as pesticides, heavy metals, antibiotics and other medical drugs) present in water. Subsequently, we have compiled the information on electrochemical techniques (such as voltammetric and electrochemical impedance spectroscopy) and their crucial parameters for detecting pollutants. Further, the applications of CNMs for sensing pharmaceutical and food pollutants have been demonstrated in detail. Finally, the topic has been concluded with existing challenges and future prospects.

Activated Glassy Carbon Electrode as an Electrochemical Sensing Platform for the Determination of 4-Nitrophenol and Dopamine in Real Samples

Glassy carbon electrode (GCE) was electrochemically activated using a repetitive cyclic voltammetric technique to develop an activated glassy carbon electrode (AGCE). The developed AGCE was optimized and utilized for the electrochemical assay of 4-nitrophenol (4-NP) and dopamine (DA). Cyclic voltammetry (CV) was employed to investigate the electrochemical behavior of the AGCE. Compared to the bare GCE, the developed AGCE exhibits a significant increase in redox peak currents of 4-NP and DA, which indicates that the AGCE significantly improves the electrocatalytic reduction of 4-NP and oxidation of DA. The electrochemical signature of the activation process could be directly associated with the formation of oxygen-containing surface functional groups (OxSFGs), which are the main reason for the improved electron transfer ability and the enhancement of the electrocatalytic activity of the AGCE. The effects of various parameters on the voltammetric responses of the AGCE toward 4-NP and DA were studied and optimized, including the pH, scan rate, and accumulation time. Differential pulse voltammetry (DPV) was also utilized to investigate the analytical performance of the AGCE sensing platform. The optimized AGCE exhibited linear responses over the concentration ranges of 0.04-65 μM and 65-370 μM toward 4-NP with a lower limit of detection (LOD) of 0.02 μM (S/N = 3). Additionally, the AGCE exhibited a linear responses over the concentration ranges of 0.02-1.0 and 1.0-100 μM toward DA with a lower limit of detection (LOD) of 0.01 μM (S/N = 3). Moreover, the developed AGCE-based 4-NP and DA sensors are distinguished by their high sensitivity, excellent selectivity, and repeatability. The developed sensors were successfully applied for the determination of 4-NP and DA in real samples with satisfactory recovery results.

Bio-AgNPs-based electrochemical nanosensors for the sensitive determination of 4-nitrophenol in tomato samples: the roles of natural plant extracts in physicochemical parameters and sensing performance

The present work reports efficient electrochemical nanosensors for the sensitive monitoring of 4-nitrophenol (4-NP) in tomato samples using various biosynthesized silver nanoparticles (bio-AgNPs). Three different bio-AgNP types were synthesized using natural plant extracts, including green tea (GT) leaf, grapefruit peel (GP), and mangosteen peel (MP), aiming to investigate their effects on the formation of bio-AgNPs, as well as the analytical performance of 4-NP. Based on the obtained results, it was found that the phytochemical content in various plant extracts directly influenced the physicochemical parameters of the created bio-AgNPs, such as particle size, crystallinity, and distribution. More importantly, these parameters have decisive effects on the electrocatalytic activity, conductivity, and electrochemical sensing performance of electrodes modified with them for 4-NP detection. Among the three bio-AgNPs evaluated, the GT-AgNPs (using green tea leaf extract) with uniform shape, small size without aggregation, and high crystallinity showed the best analytical performance for 4-NP determination. The electrode-modified GT-AgNPs exhibited a good 4-NP analytical performance with an electrochemical sensitivity of 1.25 μA μM⁻¹ cm⁻² and a detection limit of 0.43 μM in the detection range from 0.5 to 50 μM. The practical applicability of the sensor was also studied in tomato samples, promising satisfactory results toward 4-NP detection in other real samples.

In this work, we systematically investigated and compared the electrochemical sensing performances of three electrodes modified with various bio-AgNPs toward 4-NP detection in tomato samples.

In situ electrochemical synthesis of graphene-poly(arginine) composite for p-nitrophenol monitoring

Para-Nitrophenol (p-nitrophenol) is a common industrial pollutant occurring widely in water bodies, yet actual monitoring methods are limited. Herein we proposed a fully electrochemically in situ synthesized graphene-polyarginine composite functionalized screen printed electrode, as a novel p-nitrophenol sensing platform. The electrode was characterized by morphologic, spectrometric and electrochemical techniques. p-nitrophenol in both pure aqueous solution and real water samples was tested. Results show a detection limit as low as the nanomolar level, and display a linear response and high selectivity in the range of 0.5-1250 μM. Molecular simulation reveals a detailed synergy between graphene and poly-arginine. The preferable orientation of nitrophenol molecules on the graphene interface in the presence of poly-arginine induces H- and ionic binding. This sensor is an ideal prototype for p-nitrophenol quantification in real waters.

Sensing Methods for Hazardous Phenolic Compounds Based on Graphene and Conducting Polymers-Based Materials

It has been known for years that the phenolic compounds are able to exert harmful effects toward living organisms including humans due to their high toxicity. Living organisms were exposed to these phenolic compounds as they were released into the environment as waste products from several fast-growing industries. In this regard, tremendous efforts have been made by researchers to develop sensing methods for the detection of these phenolic compounds. Graphene and conducting polymers-based materials have arisen as a high potential sensing layer to improve the performance of the developed sensors. Henceforth, this paper reviews the existing investigations on graphene and conducting polymer-based materials incorporated with various sensors that aimed to detect hazardous phenolic compounds, i.e., phenol, 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol, and 2,4-dimethylphenol. The whole picture and up-to-date information on the graphene and conducting polymers-based sensors are arranged in systematic chronological order to provide a clearer insight in this research area. The future perspectives of this study are also included, and the development of sensing methods for hazardous phenolic compounds using graphene and conducting polymers-based materials is expected to grow more in the future.

Highly Sensitive and Selective Eco-Toxic 4-Nitrophenol Chemical Sensor Based on Ag-Doped ZnO Nanoflowers Decorated with Nanosheets

Herein, we have developed a novel sensing electrode to detect the eco-toxic 4-nitrophenol (4-NP). Ag-doped-ZnO nanoflowers were synthesized by facile hydrothermal method and examined by several characterization techniques in order to understand the morphology, crystal structure, composition, and surface properties. Morphological results were confirmed by the formation of Ag-doped ZnO nanoflowers decorated with nanosheets. Ag-doped ZnO/glassy carbon electrode (GCE) electrode-material-matrix was used for electrochemical sensing of toxic 4-NP. Under optimized conditions, Ag-doped ZnO/GCE modified electrode exhibits high-sensitivity and selectivity compared to the bare GCE electrode. The Ag-doped ZnO/GCE modified electrode exhibits high electrocatalytic oxidation towards 4-NP. Anodic peak current of 4-NP is increased linearly by increasing the concentration of nitrophenol. Additionally, Ag-doped ZnO/GCE shows a wide range of sensitivity from 10 µM to 500 µM, and a linear calibration plot with a good detection limit of 3 µM (S/N = 3). The proposed Ag-doped ZnO/GCE modified electrode showed high sensing stability. In addition, the oxidation mechanism was studied. The obtained results revealed that the Ag-ZnO/GCE electrode could be the promising sensing electrode for 4-NP sensing.

Surface-tuned hierarchical ɤ-Fe2O3-N-rGO nanohydrogel for efficient catalytic removal and electrochemical sensing of toxic nitro compounds

4- Nitrophenol (4-NP) is a top rated hazardous environmental pollutant and secondary explosive chemicals. For the sake of ecology and environment safety, the catalytic reduction and detection of 4-NP is highly important. In this work, ɤ-Fe₂O₃-nitrogen doped rGO (ɤ-Fe₂O₃-N-rGO) nanohydrogel was synthesized by green hydrothermal method. The morphology and phase purity of prepared ɤ-Fe₂O₃-N-rGO nanohydrogel were confirmed by various analytical (SEM, TEM, XRD, and XPS) and electrochemical techniques. The morphological structure of ɤ-Fe₂O₃-N-rGO nanohydrogel confirmed that the nanocrystals are well covered over the 2D N-rGO layer. Further, ɤ-Fe₂O₃-N-rGO nanohydrogel was applied for the catalytic reduction and electrochemical detection of ecotoxic 4-NP. A low cost, ɤ-Fe₂O₃-N-rGO nanohydrogel displayed an excellent catalytic activity, high recyclability (>5 cycles) and high conversion efficiency of 4-NP to 4-Aminophenol (4-AP). In addition, ɤ-Fe₂O₃-N-rGO nanohydrogel modified GCE displayed a wide linear sensing range (0.1-1000 μM), and a low detection limit (LOD) of 0.1 μM with excellent sensitivity, high selectivity (<1.2%) and good stability (>4 weeks). The developed sensor electrode shows the low reduction potential of -0.3 V and -0.60 V for the determination of 4-NP. The proposed ɤ-Fe₂O₃-N-rGO nanohydrogel is promising catalyst for the detection and removal of toxic aromatic nitro compounds in real site applications.

A facile synthesis of metal ferrites and their catalytic removal of toxic nitro-organic pollutants

Nitrocompounds are the major prime water contaminants. In this investigative study, toxic nitrocompounds (4-nitrophenol, 2,4-dinitrophenol, 2,4,6-trinitrophenol) were removed by using magnetic CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems. The metal ferrites were synthesized through hydrothermal method and also followed with calcination process. The properties of metal ferrites were confirmed through using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE-SEM) studies and results there on were presented. For the first time, the synthesized CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems were used for the reduction of 4-nitrophenol (NP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP) in aqueous medium. The UV-visible spectrometry was employed to monitor the removal of nitro compounds and formation of aminophenol. Among, the three catalysts, the CuFe₂O₄ displayed excellent removal activity for nitrocompounds. The CuFe₂O₄ nanoparticles completely removed the NP, DNP and TNP within 2, 5, 10 min, respectively. The NP reduction reaction follows the pseudo-first-order kinetics. Further, the investigated and proposed CuFe₂O_4, catalyst has given and demonstrated excellent kinetic rate constants 0.990, 0.317, 0.184 min^-1 for 4-NP, DNP and TNP respectively, which was very fast kinetic than the already published reports. Also, the aminophenol formation was confirmed for the above mentioned and select nitrocompounds. The obtained results confirm suggest that CuFe₂O₄ nanoparticles based material system could be one of the promising catalysts for nitro compounds removal process.

Scalable Electrochemical Synthesis of Novel Biogenic Silver Nanoparticles and Its Application to High-Sensitive Detection of 4-Nitrophenol in Aqueous System

This study reports a scalable green electrochemical synthesis of novel biogenic silver nanoparticles colloid (biogenic AgNPs) in large scale up to 5 liters using the bulk silver bar and the green tea leaves (Camellia sinensis) extract (GTE) as reducing agent during the electrochemical process. Under a direct-current voltage source, the biomolecules in GTE can release electrons to promote the reducing process of Ag+ to Ag0. More interestingly, the formation of the intermediate complex helps to cap on the nanoparticles, which leads to stabilizing AgNPs. The as-synthesized biogenic AgNPs with the size of 34 nm exhibit the outstanding electrochemical properties due to the presence of biomolecules on the biogenic AgNPs surface, which facilitates the effective attaching of AgNPs on the carbon surface of the screen-printed carbon electrode (SPE) through the formation of the strong C-O coordinate bonds between O atom of oxygen functional groups and C atom of SPE. The electrochemical properties of the biogenic AgNPs-modified SPE are enhanced significantly in comparison with bare SPE and pure AgNPs-SPE. The biogenic AgNPs-SPE is applied successfully to the detection of 4-nitrophenol (4-NP). The electrochemical sensor using biogenic AgNPs can reliably detect 4-NP in the linear range from 0.1 to 25 μM with the sensitivity about 6.69 μA μM-1 cm-2. The present work reveals, as the greener synthesis method with ultra-large scalable ability, high purity, and excellent electrochemical properties of biogenic AgNPs is very promising for technological applications in high-sensitive electrochemical chemosensors, nanopharmaceuticals, and other fields.

Novel construction of carbon nanofiber/CuCrO2 composite for selective determination of 4-nitrophenol in environmental samples and for supercapacitor application

A simple hydrothermal process has been used to prepare a carbon nanofiber/copper chromium dioxide (CNF/CuCrO₂) composite for the selective detection of 4-nitrophenol (4-NP) and supercapacitor applications. The electrochemical sensor was developed with a glassy carbon electrode (GCE) modified with the CNF/CuCrO₂ composite by the drop-casting method. The structural formation of the prepared materials was confirmed by infrared spectroscopy, electrochemical impedance spectroscopy, Raman spectroscopy, scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. To investigate the electrochemical efficiency of the electrode, various electroanalytical techniques, namely, differential pulse voltammetry (DPV), cyclic voltammetry (CV) and galvanostatic charge–discharge tests, were employed. The GCE/CNF/CuCrO₂ modified electrode exhibited excellent electrocatalytic behavior for the detection of 4-NP under optimized conditions with a low detection limit (0.022 μM), long linear response range of 0.1–150 μM, and high sensitivity (20.02 μA μM⁻¹ cm⁻²). The modified electrode was used for the detection of 4-NP in real samples with satisfactory results. In addition, the GCE/CNF/CuCrO₂ electrode has advantages such as stability, reproducibility, repeatability, reliability, low cost, and practical application. The CNF/CuCrO₂ composite coated Ni-foam electrodes also exhibited excellent supercapacitor efficiency, with a high specific capacitance of up to 159 F g⁻¹ at a current density of 5 A g⁻¹ and outstanding cycling stability. Hence, the CNF/CuCrO₂ composite is a suitable material for 4-NP sensors and energy storage applications.

A simple hydrothermal process has been used to prepare a carbon nanofiber/copper chromium dioxide (CNF/CuCrO₂) composite for the selective detection of 4-nitrophenol (4-NP) and supercapacitor applications.

In situ formed zinc oxide/graphitic carbon nitride nanohybrid for the electrochemical determination of 4-nitrophenol

The electrochemical determination of 4-nitrophenol using a nanohybrid consisting of glassy carbon (GC) and zinc oxide/graphitic carbon nitride (ZnO/g-CN nanosheet), is described. The ZnO/g-CN nanohybrid was in situ synthesized by chemical method and well characterized using absorption spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopic analysis. It was observed that the nanosized ZnO particles were present inside the sheet-like g-CN nanostructure. The nanohybrid-modified electrode showed an enhanced electrocatalytic response for 4-nitrophenol reduction compared with the bare GC electrode. The assay exhibited linear ranges of 13.4-100 μM and 100-1000 μM for 4-NP determination. The limit of detection and limit of quantification were 4.0 and 13.4 μM, respectively, at the working potential of - 0.85 V. An appreciable precision was found towards the stability of the assay in the determination. It provides selectivity against inorganic and organic substances such as calcium chloride, potassium chloride, nitrobenzene, uric acid, 1-chloro,2,4-dinitrobenzene, 1-bromo,2-nitrobenzene and 1-iodo,2-nitrobenzene. The practical applicability of the assay was also checked in the analysis of real water samples and satisfactory recovery of 4-NP was found. Schematic representation of the synthesis of zinc oxide (ZnO) nanostructures incorporated graphitic carbon nitride nanosheets (g-C₃N₄ NSs) and its application in the voltammetric determination of 4-nitrophenol (4-NP) is presented. The nanohybrid assay showed selectivity among coexisting compounds and good recovery in real sample analysis.

An Astragalus membranaceus based eco-friendly biomimetic synthesis approach of ZnO nanoflowers with an excellent antibacterial, antioxidant and electrochemical sensing effect

Nowadays featuring outstanding eco-friendliness, the phytochemical fabrication method of nanostructures is very popular. Here, we propose to utilize the Astragalus membranaceus extract as the reducing and capping agent to stabilize the metal and to avoid the aggregations of nanoparticles during ZnO nanoflowers synthesis procedure. As a result, the whole fabrication procedure was highly efficient and cost-effective without requiring a special environment of high pressure or elevated temperature and without chemical hazards used or produced. After the fabrication, detailed characterization about material morphology and crystal structure was carried out, including scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscope (FTIR). Moreover, the ZnO nanoflowers demonstrated distinctive antibacterial, antioxidant and electrochemical sensing effect. Specifically, ZnO nanoflowers had an antibacterial inhibition zone of 19(±0.7) and 15(±0.8) mm in diameter against the concentration of 50 μL (1 mg/mL) Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which is greatly improved compared to the reference drug (Kanamycin). Besides, antioxidant activity was also tested using H₂O₂ free radical scavenging assay and 60% 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition of 0.5 mg/mL was reported. Finally, controlled by the diffusion process during the charge transfer procedure, 4-nitorphenol was dramatically reduced and a limit of detection of 0.08 μM by ZnO nanoflowers modified electrode was observed during the cyclic voltammetry (CV) experiment. Because the phenolic compounds originating from Astragalus membranaceus helped to facilitate the electron transfer, the limit of detection was lower compared to other materials, such as copper oxide nanoparticles (Cu₂O-NPs), silicon dioxide/silver nanoparticles (SiO₂/Ag-NPs), zinc oxide nanoparticles (ZnO-NPs), activated carbon (AC) and cobalt oxide nanocubes (Co₃O₄). Therefore, featuring easy operation, low-cost and eco-friendliness, our proposed ZnO nanoflowers fabrication method will have a great potential in biomedical and electro-catalytic fields.

Electrochemical determination of 4-nitrophenol in environmental water samples using porous graphitic carbon nitride-coated screen-printed electrode

We demonstrate a facile preparation of novel oxidized graphitic carbon nitride (O-gC₃N₄) applied as an efficient electrocatalyst for highly sensitive electrochemical detection of 4-nitrophenol (4-NP) in environmental water samples. As-prepared O-gC₃N₄ were characterized by attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction methods for the confirmation of different functional groups and structural phase of O-gC₃N₄. The surface morphology of the O-gC₃N₄ was characterized using field emission scanning electron microscopy and high-resolution transmission electron microscopy. Results revealed that the synthesized gC₃N₄ possessed acid functional groups, nanosheet with porous in nature. The O-gC₃N₄ was drop cast on the screen-printed electrode (SPE), and it was applied for electrochemical determination of 4-NP using cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The O-gC₃N₄/SPE exhibited excellent electrocatalytic activity towards 4-NP detection. Under the optimized experimental conditions, the DPV response of O-gC₃N₄/SPE showed good linear range from 0.0033 to 0.313 μM with a detection limit (S/N = 3) of 0.075 μM. The developed electrode has successfully applied for the determination of 4-NP in different environmental water samples, and the results have shown satisfied.

Design strategy of rGO–HNT–AgNPs based hybrid nanocomposite with enhanced performance for electrochemical detection of 4-nitrophenol

We report a highly precise and sensitive electrochemical sensor to detect 4-nitrophenol based on halloysite nanotubes with silver nanoparticles decorated on reduced graphene oxide.

Removable Composite Electrode Made of Silver Nanoparticles on Pyrolyzed Photoresist Film for the Electroreduction of 4-Nitrophenol

Access to removable nanocomposite electrodes for electrosensing of pollutants is of great importance. However, the preparation of reproducible and reliable carbon electrodes decorated with metallic nanoparticles, a prerequisite for trustworthy devices, remains a challenge. Here we describe an innovative and easy method to prepare such electrodes. These latter are silicon-coated with a thin carbon film on which controlled silver nanostructures are grafted. Different silver nanostructures and surface coverage of the carbon electrode (16, 36, 51, and 67%) can be obtained through a careful control of the time of the hydrogenolysis of the N-N' isopropyl butylamidinate silver organometallic precursor (t = 1, 5, 15, and 60 min, respectively). Importantly, all nanocomposite surfaces are efficient for the electrodetection of 4-nitrophenol with a remarkable decrease of the overpotential of the reduction of such molecule up to 330 mV. The surfaces are characterized by atomic force microscopy, grazing incidence X-ray diffraction, scanning electronic microscopy, and Raman spectroscopy. Furthermore, surface-enhanced Raman scattering effect is also observed. The exaltation of the Raman intensity is proportional to the surface coverage of the electrode; the number of hot spots increases with the surface coverage.

Ultrasound-induced radicals initiated the formation of inorganic-organic Pr2O3/polystyrene hybrid composite for electro-oxidative determination of chemotherapeutic drug methotrexate

To dates, the facile synthesis of inorganic-coated organic polymer composite has received greater attention in the order of research fields including advanced materials and electrochemical analysis owing to the complementary or synergistic effects. In this context, Pr₂O₃ and Pr₂O₃ coated polystyrene (Pr₂O₃/PS) inorganic-organic colloidal composite were prepared via ultrasound-induced radicals initiated precipitation and dispersion polymerization methods. The synthesized Pr₂O₃/PS composite was systematically studied by FE-SEM, TEM, EDX, FT-IR, XRD, and XPS analysis. This composite modified glassy carbon electrode (Pr₂O₃/PS GCE) was utilized to construct a novel electrochemical sensor for the detection assay of chemotherapy agent methotrexate (MTA). Under optimal condition, the designed sensor showed outstanding performance for MTA trace level detection over the linear concentration range of 0.01-236 µM with a detection limit of 0.8 nM for MTA. Furthermore, the prepared sensor accomplished excellent stability and relevant reproducibility, in addition to reliable practical assay in real human blood serum and urine samples. Besides, the possible MTA sensing mechanism of Pr₂O₃/PS GCE has been deliberated in detail. Our finding suggested that the developed Pr₂O₃/PS composite might be a favorable material for the fabrication of the high-performance electrochemical sensor.

Metal-Organic Framework-Based Composite for Photocatalytic Detection of Prevalent Pollutant

Photocatalytic properties of 2,5-furandicarboxylic acid (FDCA), a model organic molecule used for biopolymer production, are reported for the first time. Further integration of FDCA into metal-organic framework (MOF) structures and subsequent silver-based photoactivation leads to the next generation of hybrids with controlled morphologies, capable of forming sensorial platforms for prevalent phenol contaminant detection. The mechanisms that allow photocatalytic functionality are driven by the charge carrier generation in the organic molecule (either in its alone or integrated form) and depend on sample's physical and chemical properties as confirmed by scanning and transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and X-ray diffraction, respectively. Electrochemical analysis using cyclic voltammetry confirmed high sensitivity for p-nitrophenol (p-NP) detection as dictated by the selective electron migration at a user-controlled electrode interface. Considering the wide usage of p-NP and its increased discharge shown to lead to harmful effects on both the environment and biosystems, this new detection method is envisioned to allow effective control and regulation of such compound release, all under low-cost and environmentally friendly conditions.

Facile and Ultrasensitive Determination of 4-Nitrophenol Based on Acetylene Black Paste and Graphene Hybrid Electrode

4-nitrophenol (4-NP) is a hazardous waste and a priority toxic pollutant identified by US Environmental Protection Agency (EPA). Hence, in this paper, a voltammetric sensor was proposed for the direct and sensitive detection of 4-nitrophenol (4-NP) at nanomolar level in complex matrices by using graphene and acetylene black paste hybridized electrode (GR/ABPE). Under optimal conditions, the calibration curve demonstrates a linear relationship for 4-NP in the range from 20 nM to 8.0 μM and 8.0 μM to 0.1 mM separately with the detection limit of 8.0 nM. In addition to it, the performance of the GR/ABPE in practical applications was evaluated by detecting 4-NP in various water samples, and satisfactory recoveries were realized. Therefore, GR/ABPE may have a great potential application for facile and sensitive detection of 4-NP in complex matrices at nanomolar level.

Tunable synthesis of ultrathin AuAg nanowires and their catalytic applications

Metallic nanowires (NWs) are very interesting and important nanomaterials with unique properties and a number of potential applications. Herein we report a tunable synthesis of water soluble ultrathin AuAg NWs. By using TEM and UV-vis spectroscopy, we demonstrate that these NWs can be produced by a new two-step process, which involves the formation of NW templates during the aging period and the subsequent formation of thicker NWs by a solvent driven fusion and wetting process. Our control studies further show that silver concentration plays a key role in the formation of these nanowires. We also demonstrate that these nanowires can effectively catalyse the reduction of 4-nitrophenol to the corresponding 4-aminophenol. Interestingly, the larger diameter ultrathin nanowires (av. 8 nm) exhibit a greater catalytic performance than the thinner nanowires (av. 3 nm). We believe that these studies are important for further development of one dimensional metal based nanomaterials, which may find a range of potential research and technological applications.

Simplistic synthesis of ultrafine CoMnO3 nanosheets: An excellent electrocatalyst for highly sensitive detection of toxic 4-nitrophenol in environmental water samples

Design and fabrication of cost effective analytical tools to monitor toxic organic emissions in eco system is of a great necessity. Nitrophenols are a class of widespread toxic organic pollutant lead to serious adverse effects in biosphere on its consumption. This article reports a high sensitive, cost effective, robust electrochemical sensor for 4-nitrophenol (4-NP) in environmental water samples. A novel sheet like CoMnO₃ (CMO Ns) nanocatalyst was synthesized via oxalic acid assisted co-precipitation technique and employed as electrocatalyst for the high sensitive detection of 4-NP. The physiochemical properties of CMO Ns are studied in detail via XRD, FTIR, TEM, TGA, and XPS. TEM results reviled the protocol is an excellent way for synthesis of a uniformly distributed CMO Ns with lathery surface. Evident to the surface and other physiochemical studies the CMO Ns based sensor holds superior electrocatalytic activity towards 4-NP detection with excellent sensitivity (2.458 μA μM^-1 cm^-2) coupled with nanomolar detection (10 nm) limits. Moreover, the constructed sensor holds reliable long-term durability, good reproducibility, and excellent working stability. The practical applicability of the developed sensor was evaluated by determination of 4-NP in samples acquired from water resources with RSD ± 3.3%.