In-situ fabrication of reduced graphene oxide (rGO)/ZnO heterostructure: surface functional groups induced electrical properties

3D ordered amorphous and porous TiO2 framework anode with low insertion barrier and fast kinetics for K-ion hybrid capacitors

TiO₂ is considered as a low cost, long-term stable, and safe anode for high power K-ion hybrid capacitors (KICs) due to its abundant reserve, small volume expansion rate, and sloping voltage plateau that avoids K-ion plating at high voltage polarization. However, the enhancement of its low capacity and sluggish kinetics caused by poor electroconductivity and high insertion barrier is still challenging to further develop high-performance KICs. Herein, the reduced graphene oxide (rGO) is embedded in the walls of 3D ordered macro-/mesoporous TiO₂ (termed as TiO₂@rGO framework) to create intimate TiO₂/rGO interfaces, ensuring the effectively electron transportation during potassiation/depotassiation of TiO₂ while maintaining rapid ions/electrolyte diffusion. Furthermore, the controlled amorphous TiO₂ framework can further lower the lattice insertion energies, contributing to a fast accommodation of K-ion. As expected, the amorphous TiO₂@rGO framework (TiO₂@rGO-1) exhibits a superior rate capability (148.8 mAh g^-1 at 5 A g^-1) and cycling stability (171.2 mAh g^-1 at 1 A g^-1 after 800 cycles). The assembled KICs can reach a high energy/power density of 125.2 Wh kg^-1/4267.4 W kg^-1 as well as a long-term lifespan. This tactic provides a reliable and general way to design a TiO₂-based anode with fast kinetics toward high-performance KICs.

Graphene Oxide-ZnO Nanocomposites for Removal of Aluminum and Copper Ions from Acid Mine Drainage Wastewater

Adsorption technologies are a focus of interest for the removal of pollutants in water treatment systems. These removal methods offer several design, operation and efficiency advantages over other wastewater remediation technologies. Particularly, graphene oxide (GO) has attracted great attention due to its high surface area and its effectiveness in removing heavy metals. In this work, we study the functionalization of GO with zinc oxide nanoparticles (ZnO) to improve the removal capacity of aluminum (Al) and copper (Cu) in acidic waters. Experiments were performed at different pH conditions (with and without pH adjustment). In both cases, decorated GO (GO/ZnO) nanocomposites showed an improvement in the removal capacity compared with non-functionalized GO, even when the pH of zero charge (pH_PZC) was higher for GO/ZnO (5.57) than for GO (3.98). In adsorption experiments without pH adjustment, the maximum removal capacities for Al and Cu were 29.1 mg/g and 45.5 mg/g, respectively. The maximum removal percentages of the studied cations (Al and Cu) were higher than 88%. Further, under more acidic conditions (pH 4), the maximum sorption capacities using GO/ZnO as adsorbent were 19.9 mg/g and 33.5 mg/g for Al and Cu, respectively. Moreover, the removal percentages reach 95.6% for Al and 92.9% for Cu. This shows that decoration with ZnO nanoparticles is a good option for improving the sorption capacity of GO for Cu removal and to a lesser extent for Al, even when the pH was not favorable in terms of electrostatic affinity for cations. These findings contribute to a better understanding of the potential and effectiveness of GO functionalization with ZnO nanoparticles to treat acidic waters contaminated with heavy metals and its applicability for wastewater remediation.

Graphene oxide as selective transporter of flavonols for physiological target DNA: A two-color fluorescence approach

Our study determines the selectivity of graphene oxide (GO) to recognize its ligands (e.g. flavonoids) in facilitating the binding with their respective cellular targets. The polyhydroxy phenolic compounds, flavonoids, have a broad spectrum of therapeutic activities with high potency and low systemic toxicity. Despite the vast medicinal importance, their bioavailability is low. In this exploratory study, GO has been used as the transporter of three flavonols fisetin (3, 7, 3', 4'-OH flavone), quercetin (3, 5, 7, 3', 4'-OH flavone), and morin (3, 5, 7, 2', 4'-OH flavone) for the physiological target DNA. Calf thymus DNA is chosen as the model physiological target. Characterization of GO is performed using FTIR, Raman and dynamic light scattering (DLS) spectroscopy. The strong absorption peak at 1730 cm-1 indicated the presence of carbonyl groups (C=O) at the edges of GO. The presence of sp3 carbons due to oxidation of sp2 carbons in GO is further proved by Raman spectroscopy. DLS provided the average size of the GO particles to be ~9 μm. The dual luminescence behavior of the flavonols has been used in this study for the noninvasive sensing of the GO-flavonol and GO-flavonol-DNA interactions; as well as for the selectivity of GO for one flavonol over other in transferring the ligand to DNA. Furthermore, circular dichroism (CD) indicated that the optical activity of GO undergoes drastic change when conjugated with flavonols. Molecular modeling corroborated the findings from the binding studies. GO provides high promise as facilitators for drug delivery.

Defect-enhanced performance of a 3D graphene anode in a lithium-ion battery

Morphological defects were generated in an undoped 3D graphene structure via the involvement of a ZnO and Mg(OH)₂ intermediate nanostructure layer placed between two layers of vapor-deposited graphene. Once the intermediate layer was etched, the 3D graphene lost support and shrank; during this process many morphological defects were formed. The electrochemical performance of the derived defective graphene utilized as the anode of a lithium (Li)-ion battery was significantly improved from ∼382 mAh g^-1 to ∼2204 mAh g^-1 at 0.5 A g^-1 compared to normal 3D graphene. The derived defective graphene exhibited an initial capacity of 1009 mAh g^-1 and retention of 83% at 4 A g^-1 for 500 cycles, and ∼330 mAh g^-1 at a high rate of 20 A g^-1. Complicated defects such as wrinkles, pores, and particles formed during the etching of the intermediate layer, were considered to contribute to the improvement of the electrochemical performance.

Real-time spectroscopic monitoring of photocatalytic activity promoted by graphene in a microfluidic reactor

Photocatalytic microreactors have been utilized as rapid, versatile platforms for the characterization of photocatalysts. In this work, a photocatalytic microreactor integrated with absorption spectroscopy was proposed for the real-time monitoring of photocatalytic activity using different catalysts. The validity of this method was investigated by the rapid screening on the photocatalytic performance of a titanium oxide (TiO₂)-decorated graphene oxide (GO) sheet for the degradation of methylene blue under monochromatic visible irradiation. The sampling interval time could be minimized to 10 s for achieving real-time detection. The best photocatalytic activity was observed for an optimized TiO₂/GO weight mixing ratio of 7:11, with a reaction rate constant up to 0.067 min⁻¹. The addition of GO into TiO₂ enhances photocatalytic activity and adsorption of MB molecules. The synthetic reaction rate constant was up to approximately 0.11 min⁻¹, which was also the highest among the catalysts. The microreactor exhibited good sensitivity and reproducibility without weakening the performance of the photocatalysts. Consequently, the photocatalytic microreactor is promising as a simple, portable, and rapid screening tool for new photocatalysts.

Enhancing local luminescence in a hollow ZnO microcolumn by antiresonant reflecting

Hollow ZnO microcolumns with size induced photoluminescence and cathodoluminescence properties were prepared by a thermal chemical vapor transport and condensation method. It was found that the luminescence emission could be confined in the nano-sized hollow core and the wavelength dependent light intensity could be influenced by the geometric structure of the ZnO microcolumn, which can act as a hollow optical waveguide. Based on the antiresonant reflection in the optical waveguide, we established a theoretical model to address the field enhancement in the hollow ZnO microcolumn, which systematically clarifies the influence of the geometric structure of the microcolumn on the field enhancement. We report for the first time, the enhanced emission of the near ultraviolet light (working wavelength of 385 nm) along the axial direction of the ZnO microcolumn. The corresponding microsized light emitter has also been obtained. Experiments agree well with both theoretical predictions and computer simulations based on the finite-difference time-domain method with perfectly matched layer boundary conditions. These findings provide valuable information for the application of ZnO micro- and nanostructures in optoelectronic devices.