Improving the performance of a non-aqueous lithium-air battery by defective titanium dioxides with oxygen vacancies

Tannic Acid Selective Modulation Defects to Enhance the Photocatalytic CO2 Reduction Activity of Layered Double Hydroxides

Recently, layered double hydroxides (LDH) have shown great potential in photoreduction of CO2 owing to its flexible structural adjustability. In this study, the mild acidic property of tannic acid (TA) is exploited to etch the bimetal LDH to create abundant vacancies to gain the coordination unsaturated active centers. Based on the different chelating abilities of TA to various metal ions, the active metals are remained by selective chelation while the inert metals are removed during the etching process of bimetal LDH. Furthermore, selective chelating with metal ions not only increases the percentage of highly active metals but also compensates for the structural damage caused by the etch, which achieves a scalpel-like selective construction of vacancies. The NiAl-LDH etched and functionalized by TA for 3 h exhibits superior photo-reduction of CO2 performance without co-catalysts and photo-sensitizers, which is 14 times that of the pristine NiAl-LDH. The fact that many bimetal LDHs can be functionalized by TA and exhibit significantly improved photocatalytic efficiency is confirmed, suggesting this strategy is generalized to functionalize double- or multi-metal LDH. The method provided in this work opens the door for polyphenol-functionalized LDHs to enhance their ability for light-driven chemical transformations.

Niobium-doped conductive TiO-TiO2 heterostructure supported bifunctional catalyst for efficient and stable zinc-air batteries

The development of highly active and durable nonprecious metal-based bifunctional electrocatalysts for oxygen reduction/evolution reaction (ORR/OER) is important for rechargeable zinc-air batteries. Herein, a three-dimensional conductive niobium-doped TiO-TiO2 heterostructure supported ZIF-67-derived Co-NC bifunctional catalyst was fabricated. In the Co-NC@Nb-TiOx catalyst, the Nb doping promoted the formation of TiO-TiO2 heterojunction support, enhanced its conductivity and stability and provided strong electron metal-support interaction between Co-NC and Nb-TiOx. Also, the supported Co-NC nanoparticles provided abundant active sites with excellent ORR/OER activity. Experimental analysis reveals that the high OER activity of Co-NC@Nb-TiOx can be attributed to the in-situ generated CoOOH species. It exhibits excellent ORR activity, as shown by its onset potential (0.95 V vs. RHE) and half-wave potential (0.86 V vs. RHE). Its OER overpotential at 10 mA cm-2 is 480 mV. The zinc-air battery realizes outstanding cycling stability over 225 h cycles tested at 10 mA cm-2. This work demonstrates the importance of designing highly stable metal oxide-supported catalysts in electrochemical energy conversion devices.

Theoretical Design and Structural Modulation of a Surface-Functionalized Ti3C2Tx MXene-Based Heterojunction Electrocatalyst for a Li-Oxygen Battery

Two-dimensional MXene with high conductivity has metastable Ti atoms and inert functional groups on the surface, greatly limiting application in surface-related electrocatalytic reactions. A surface-functionalized nitrogen-doped two-dimensional TiO₂/Ti₃C₂T_x heterojunction (N-TiO₂/Ti₃C₂T_x) was fabricated theoretically, with high conductivity and optimized electrocatalytic active sites. Based on the conductive substrate of Ti₃C₂T_x, the heterojunction remained metallic and efficiently accelerated the transfer of Li⁺ and electrons in the electrode. More importantly, the precise regulation of active sites in the N-TiO₂/Ti₃C₂T_x heterojunction optimized the adsorption for LiO₂ and Li₂O₂, facilitating the sluggish kinetics with a lowest theoretical overpotential in both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Employed as an electrocatalyst in a Li-oxygen battery (Li-O₂ battery), it demonstrated a high specific capacity of 15 298 mAh g^-1 and a superior cyclability with more than 200 cycles at 500 mA g^-1, as well as the swiftly reduced overpotential. Furthermore, combined with the in situ differential electrochemical mass spectrometry, ex situ Raman spectra, and SEM tests, the N-TiO₂/Ti₃C₂T_x heterojunction electrode presented a superior stability and reduced side reaction along with the high performance toward the ORR and OER. It provides an efficient insight for the design of high-performance electrocatalysts for metal-oxygen batteries.

Room temperature ferromagnetism in D-D neutron irradiated rutile TiO2 single crystals

Room temperature ferromagnetism (RTFM) was observed in unirradiated rutile TiO2 single crystals prepared by the floating zone method due to oxygen vacancy (VO) defects. D-D neutrons mainly collide elastically with TiO2, producing VO, titanium vacancies (VTi) and other point defects; the density and kind of defect is related to the neutron irradiation fluence. D-D neutron irradiation is used to regulate the concentration and type of defect, avoiding impurity elements. As the irradiation fluence increases, the saturation magnetization (Ms) first increases, then decreases and then increases. To verify the origin of RTFM, the CASTEP module was used to calculate the magnetic and structural properties of point defects in TiO2. VO induces a 2.39 μ B magnetic moment, Ti3+ and F+ induce 1.28 μ B and 1.70 μ B magnetic moments, respectively, while VTi induces a magnetic moment of ∼4 μ B. Combining experimental and theoretical results, increases in VO concentration lead to Ms increases; more VO combine with electrons to form F+, inducing a smaller magnetic moment. VO and VTi play a key role and Ms changes accordingly with larger fluence. VO, F+ and VTi are the most likely origins of RTFM.

Synthesis and Progress of New Oxygen-Vacant Electrode Materials for High-Energy Rechargeable Battery Applications

During the last few years, a great amount of oxygen-vacant materials have been synthetized and applied as electrodes for electrochemical storage. The presence of oxygen vacancies leads to an increase in the conductivity and the diffusion coefficient; consequently, the controllable synthesis of oxygen vacancy plays an important role in improving the electrochemical performance, including achieving high specific capacitance, high power density, high energy density, and good cycling stability of the electrode materials for batteries. This review mainly focuses on research progress in the preparation of oxygen-vacant nanostructures and the application of materials with oxygen vacancies in various batteries (such as lithium-ion, lithium-oxygen, and sodium-ion batteries). Challenges related to and opportunities for oxygen-vacant materials are also provided.

Strategies toward High-Performance Cathode Materials for Lithium-Oxygen Batteries

Rechargeable aprotic lithium (Li)-O₂ batteries with high theoretical energy densities are regarded as promising next-generation energy storage devices and have attracted considerable interest recently. However, these batteries still suffer from many critical issues, such as low capacity, poor cycle life, and low round-trip efficiency, rendering the practical application of these batteries rather sluggish. Cathode catalysts with high oxygen reduction reaction (ORR) and evolution reaction activities are of particular importance for addressing these issues and consequently promoting the application of Li-O₂ batteries. Thus, the rational design and preparation of the catalysts with high ORR activity, good electronic conductivity, and decent chemical/electrochemical stability are still challenging. In this Review, the strategies are outlined including the rational selection of catalytic species, the introduction of a 3D porous structure, the formation of functional composites, and the heteroatom doping which succeeded in the design of high-performance cathode catalysts for stable Li-O₂ batteries. Perspectives on enhancing the overall electrochemical performance of Li-O₂ batteries based on the optimization of the properties and reliability of each part of the battery are also made. This Review sheds some new light on the design of highly active cathode catalysts and the development of high-performance lithium-O₂ batteries.

Functional and stability orientation synthesis of materials and structures in aprotic Li–O2batteries

This review presents the recent advances made in the functional and stability orientation synthesis of materials/structures for Li–O₂batteries.

Creation of oxygen reduction reaction active sites on titanium oxynitride without increasing the nitrogen doping level

Active sites were created on ORR-active titanium oxynitride by low-temperature annealing without changing the nitrogen doping level to determine their origin.