Hollow porous carbon spheres with hierarchical nanoarchitecture for application of the high performance supercapacitors

A novel approach for the facile synthesis of zinc oxide/carbon hybrid systems from corn distillers soluble: Surface modification and characterization for sustainable remediation

Sustainable, efficient, and environmentally friendly ways to tailor the carbonaceous materials from bio sources with desired functionalities remain a challenge around the world. In this study, we represent a novel approach to synthesize carbon hybrid material based on Zinc Oxide/carbon (ZnO/C) hybrid systems by catalytic hydrothermal process via crosslinking reaction through nucleation and growth of ZnO particles at the functional groups of oxidized carbon material. This research explored the volarization of Condensed Corn Distillers Soluble (CDS) as a carbon precursor to synthesize biobased carbon spheres. Surface modification of the produced carbon spheres took place using zinc chloride (ZnCl2) during hydrothermal carbonization (HTC). Zinc chloride (ZnCl2) was used to function as a catalyst during HTC and functioned as a ZnO source to synthesize (ZnO/C) hybrid systems. Design Expert software v13 was used to design the hydrothermal carbonization (HTC) experiments and response surface methodology was used to find the optimized conditions for the preparation of carbon hybrid systems. The hydrothermal synthesis process introduced 3D stone like zinc oxide particles onto the carbon matrix. These particles were self-assembled onto the carbon framework to produce carbon hybrid systems with unique physical, chemical, structural and functional properties. Herein, the obtained carbon hybrid systems (ZnO/C) were investigated and discussed in detail. ZnO/C hybrid systems were analyzed for surface morphology using scanning electron microscopy (SEM) that presented a 3D spherical interconnected phase and XRD analyses were used for phase crystallinity that showed new crystalline phases such as hopeite and zincite after the ZnCl2 incorporation. Surface functional groups were also analyzed by FTIR and results confirmed the presence of hydrophilic groups such as -OH, CC, and COOH on the surface of ZnO/C hybrid carbon systems. This study provided the insightful guidance for tailoring novel design of multifunctional carbon material as an adsorbent/catalyst for various applications of sustainable remediation.

Wrinkled Hollow Carbon Spheres with Adjustable Diameter for High-Performance Supercapacitors

Creating more pleated and collapsed structures for carbon-based electrode materials is an important measure to enhance the performance of supercapacitors. Herein, a polymer formed by the aldimine reaction of terephthalaldehyde and aminopropyltriethoxysilane was utilized as the carbon source, and tetraethoxysilane was added as a silica additive to achieve the wrinkled structure on hollow carbon spheres. The silica had a significant modulating effect on the structure of the obtained wrinkled hollow carbon sphere (WHCS), which displayed a visible pleated structure, hollow structure, high specific surface area, and pore volume. As an electrode material for supercapacitors, WHCS exhibits excellent performance with a capacitance of 312 F ⋅ g-1 and remarkable cycle life stability, demonstrating its great potential for use in supercapacitors.

Recent Progress of Hollow Carbon Nanocages: General Design Fundamentals and Diversified Electrochemical Applications

Hollow carbon nanocages (HCNCs) consisting of sp2  carbon shells featured by a hollow interior cavity with defective microchannels (or customized mesopores) across the carbon shells, high specific surface area, and tunable electronic structure, are quilt different from the other nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make HCNCs a new platform for advanced electrochemical energy storage and conversion. This review focuses on the controllable preparation, structural regulation, and modification of HCNCs, as well as their electrochemical functions and applications as energy storage materials and electrocatalytic conversion materials. The metal single atoms-functionalized structures and electrochemical properties of HCNCs are summarized systematically and deeply. The research challenges and trends are also envisaged for deepening and extending the study and application of this hollow carbon material. The development of multifunctional carbon-based composite nanocages provides a new idea and method for improving the energy density, power density, and volume performance of electrochemical energy storage and conversion devices.

Hollow C-LDH/Co9S8 nanocages derived from ZIF-67-C for high- performance asymmetric supercapacitors

The design of supercapacitor electrode materials greatly depends on the rational construction of nanostructures and the effective combination of different active materials. Due to the poor electrical conductivity and mechanical strength, nickel-cobalt double hydroxide (NiCo-LDH) cannot reach the theoretical high specific capacitance value, while Co₉S₈ shows many interesting features, such as excellent electrochemical properties, high conductivity, and greatly improved redox reactions. Therefore, we prepared ZIF-67-C derived hollow NiCo-LDH (C-LDH)/Co₉S₈ nanocages containing two components of Co₉S₈ and NiCo-LDH through a multistep transformation method. The prepared C-LDH/Co₉S₈ nanoparticles showed a hollow rhomboid dodecahedron structure, and many NiCo-LDH nanosheets were reasonably distributed on the surface. In the three-electrode test, it can be obtained that its specific capacitance is 1654 F·g^-1 when current density is 2 A·g^-1 and 82.5% capacitance retention after 5000 cycles. Moreover, asymmetric supercapacitors (ASCs) prepared with C-LDH/Co₉S₈ as cathode and AC as anode can achieve a large energy density of 47.3 Wh·kg^-1 under the condition of high power density of 1505 W·kg^-1. After 10,000 cycles, capacitance retention rate is 80.9%, exhibit excellent cycle performance, suggesting the great potential of hollow C-LDH/Co₉S₈ nanocages in the application of supercapacitors.

Efficient sucrose-derived mesoporous carbon sphere electrodes with enhanced hydrophilicity for water capacitive deionization at low cell voltages

Mesoporous carbon spheres synthesized by a hard template approach. Low contact angle and better hydrophilicity. MCS electrodes can desalinate water at a low cell voltage of 0.8 V.

Comparative Study on Supercapacitive Performances of Hierarchically Nanoporous Carbon Materials With Morphologies From Submicrosphere to Hexagonal Microprism

Hierarchically nanoporous carbon materials (HNCMs) with well-defined morphology and excellent electrochemical properties are promising in fabrication of energy storage devices. In this work, we made a comparative study on the supercapacitive performances of HNCMs with different morphologies. To this end, four types of HNCMs with well-defined morphologies including submicrospheres (HNCMs-S), hexagonal nanoplates (HNCMs-N), dumbbell-like particles (HNCMs-D), and hexagonal microprisms (HNCMs-P) were successfully synthesized by dual-template strategy. The relationship of structural-electrochemical property was revealed by comparing the electrochemical performances of these HNCMs-based electrodes using a three-electrode system. The results demonstrated that the HNCMs-S-based electrode exhibited the highest specific capacitance of 233.8 F g-1 at the current density of 1 A g-1 due to the large surface area and well-defined hierarchically nanoporous structure. Moreover, the as-prepared HNCMs were further fabricated into symmetrical supercapacitor devices (HNCMs-X//HNCMs-X) using KOH as the electrolyte and their supercapacitive performances were checked. Notably, the assembled HNCMs-S//HNCMs-S symmetric supercapacitors displayed superior supercapacitive performances including high specific capacitance of 55.5 F g-1 at 0.5 A g-1, good rate capability (retained 71.9% even at 20 A g-1), high energy density of 7.7 Wh kg-1 at a power density of 250 W kg-1, and excellent cycle stability after 10,000 cycles at 1 A g-1. These results further revealed the promising prospects of the prepared HNCMs-S for high-performance energy storage devices.

Carbon-Based Nanocages: A New Platform for Advanced Energy Storage and Conversion

Energy storage and conversion play a crucial role in modern energy systems, and the exploration of advanced electrode materials is vital but challenging. Carbon-based nanocages consisting of sp² carbon shells feature a hollow interior cavity with sub-nanometer microchannels across the shells, high specific surface area with a defective outer surface, and tunable electronic structure, much different from the intensively studied nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make carbon-based nanocages a new platform for advanced energy storage and conversion. Up-to-date synthetic strategies of carbon-based nanocages, the utilization of their unique porous structure and morphology for the construction of composites with foreign active species, and their significant applications to the advanced energy storage and conversion are reviewed. Structure-performance correlations are discussed in depth to highlight the contribution of carbon-based nanocages. The research challenges and trends are also envisaged for deepening and extending the study and application of this multifunctional material.

Advanced Supercapacitors Based on Porous Hollow Carbon Nanofiber Electrodes with High Specific Capacitance and Large Energy Density

Hollow carbon nanofibers with hierarchical porous shells were prepared by NaOH activation of the electrospinning SiCNO fibers, followed by carbonization treatment. By adjusting the carbonization temperature, porous hollow carbon nanofibers with different Brunauer-Emmett-Teller (BET) specific surface areas and total pore volumes are obtained, both of which are explored as electrode materials for supercapacitors. It was found that the obtained products (HCF800) possess the highest BET specific surface area of 2628.10 m²/g and the largest pore volume of 2.32 cm³/g when the carbonized temperature was designed at 800 °C, thus displaying the best supercapacitor performance. The electrochemical results in a three-electrode system show that HCF800 exhibits a high specific capacitance of 330.11 F/g as the discharge current density is 1 A/g and still maintains 65.3% of its original specific capacitance when the current density reaches 20 A/g. Moreover, in a two-electrode system, HCF800 also exhibits an excellent specific capacity of 259.86 F/g at a current density of 1 A/g, marvelous cyclic stability with the specific capacitance retention of 95.3% even after 10,000 cycles, and a large energy density of 12.99 W h/kg at 1.0 A/g. Significantly, the supercapacitor performance of these porous hollow carbon nanofibers is also superior to that of many previously reported carbon materials, which proved them to be worthy candidates for high-performance electrode materials.

Carbonization and Preparation of Nitrogen-Doped Porous Carbon Materials from Zn-MOF and Its Applications

Nitrogen-doped porous carbon (NPC) materials were successfully synthesized via a Zn-containing metal-organic framework (Zn-MOF). The resulting NPC materials are characterized using various physicochemical techniques which indicated that the NPC materials obtained at different carbonization temperatures exhibited different properties. Pristine MOF morphology and pore size are retained after carbonization at particular temperatures (600 °C-NPC600 and 800 °C-NPC800). NPC800 material shows an excellent surface area 1192 m2/g, total pore volume 0.92 cm3/g and displays a higher CO2 uptake 4.71 mmol/g at 273 k and 1 bar. Furthermore, NPC600 material displays good electrochemical sensing towards H2O2. Under optimized conditions, our sensor exhibited a wide linearity range between 100 µM and 10 mM with a detection limit of 27.5 µM.

Numerical simulation of the simultaneous removal of particulate matter in a wet flue gas desulfurization system

The particulate matter (PM) could be simultaneously removed during the wet flue gas desulfurization (WFGD) process. To analyze the underlying mechanism and removal efficiency, the PM removal process in a desulfurization system was numerically simulated based on the population balance model and general dynamics equation in this study. The equation was solved using the fixed-step Monte Carlo method to determine the PM removal characteristics under different working conditions (such as spray intensity, velocity of the flue gas, and layers of slurry spray). When the flue gas velocity decreased from 7 to 3 m/s, the removal efficiency increased from 90.93 to 93.52%, and when the mean geometric droplet size decreased from 3 to 1 mm, the removal efficiency increased from 67.18 to 99.14%. Besides, large diameter PM was more easily removed by the desulfurization system. Thus, the numerical simulation method was proven to be feasible by comparing these results with field measurements of a WFGD system in a coal-fired power plant.

High Specific Capacitance Electrode Material for Supercapacitors Based on Resin-Derived Nitrogen-Doped Porous Carbons

Carbon-based materials, as electrodes for supercapacitors, have attracted tremendous attention. Therefore, nitrogen-doped porous carbons (NPCs) were prepared through a facile carbonization/activation strategy by treating different mass ratios of melamine-urea-formaldehyde resin and KOH. It is clearly demonstrated that because of the introduction of KOH, the resulting NPCs were shown to have increased specific surface area and a rich pore structure, and the best sample possessed a large specific surface area of 2248 m² g^-1 and high N content, which contributed to the good electrochemical performance for supercapacitors. Accordingly, a three-electrode system assembles NPCs as an electrode using aqueous KOH solution; the specific capacitance was 341 F g^-1 under the current density of 1 A g^-1 and retained a specific capacitance of almost 92% after 5000 cycles. The maximum energy output for a symmetrical solid-state supercapacitor with NPCs as the electrode material was 9.60 W h kg^-1 at 1 A g^-1. NPCs have promising applications on high-performance supercapacitors and other energy-storage devices.

(Co, Mn)-Doped NiSe2-diethylenetriamine (dien) nanosheets and (Co, Mn, Sn)-doped NiSe2 nanowires for high performance supercapacitors: compositional/morphological evolution and (Co, Mn)-induced electron transfer

A series of MSe2-dien (M = metal(ii) ion and dien = diethylenetriamine) were grown on Ni foam (NF) based on Co(ii)/Mn(ii) salts with different molar ratios. It was found that the Co-free sample exhibited hollow tubes built by numerous interconnected nanowires, whereas nanosheets were observed in the Co-involved samples. The formation of nanosheets is associated with Co(ii), which is due to the fact that Co(ii) promotes the metal selenide nanosheet to grow along its (011[combining macron]) facet (thickness direction). Furthermore, the formation and compositional/morphological evolution of the samples were investigated. Among them, (Co, Mn)-NiSe2-dien/NF (2 : 1-Co/Mn sample) showed the largest specific capacity of 288.6 mA h g-1 at 1 A g-1 with a retention of 69% at 10 A g-1 (198.6 mA h g-1), which is associated with its ultrathin nanosheet arrays and the co-doping of (Co, Mn) into NiSe2-dien, leading to the redistribution of electron densities around the Ni and Se centers. XPS and density functional theory (DFT) calculations proved the electron transfer from NiSe2-dien to the adsorbed OH- ions from the electrolyte solution, which can facilitate the redox reaction between active sites and electrolyte ions to enhance the electrochemical performance. A hybrid supercapacitor, (Co, Mn)-NiSe2-dien/NF//activated carbon, was fabricated, which displayed an energy density of 50.9 W h kg-1 at a power density of 447.3 W kg-1 and good cycling stability with 84% capacity retention after 10 000 charge-discharge cycles. Furthermore, (Co, Mn)-doped NiSe2-dien nanosheets could be transformed into (Co, Mn, Sn)-doped NiSe2 nanowire arrays after immersion in SnCl2 alcoholic solution due to cation exchange and the Kirkendall effect, and the obtained sample exhibited a decent areal capacity of 0.267 mA h cm-2 at 5 mA cm-2.

CO2-Assisted synthesis of hierarchically porous carbon as a supercapacitor electrode and dye adsorbent

A facile and sustainable strategy was developed for the fabrication of hierarchically porous carbons with tunable pore size distributions and architectures.

N-Doped Mesoporous Carbon Sheets/Hollow Carbon Spheres Composite for Supercapacitors

Composite carbon materials with multiple morphologies (such as spheres/sheets and spheres/tubes) that combine the merits of both structures have a wide range of applications in electrochemistry, catalysis, energy storage, and so on. Therefore, the development of an efficient and simple method for preparing carbonaceous composite materials is a research hot spot. On the basis of the inhomogeneity of 3-aminophenol/formaldehyde (3-AF) polymerization spheres, the hollow 3-AF spheres were obtained after the dissolution of the internal 3-AF oligomer. The dispersed 3-AF oligomer was reassembled with silicate oligomers on the hard template of Mg(OH)₂ sheets and hollow 3-AF spheres linked by CTAB through electrostatic force. The obtained N-MCS/HCS possessed both sheet and sphere structure, with a high specific surface area and uniform mesoporous distribution. As an electrode material, N-MCS/HCS exhibited a good specific capacity (270 F g^-1 at the current density of 1 A g^-1) and outstanding cycling life stability (96.3% after 5000 cycles) at a current density of 5 A g^-1 and could be used as a new electrode material.

Tailoring porous carbon spheres for supercapacitors

The last decade has witnessed significant breakthroughs in the synthesis of porous carbon spheres (PCSs). This Review provides an updated summarization on the controlled synthesis of PCSs for supercapacitors. The synthetic methodologies can be generally categorized into (i) hard templating, (ii) soft templating, (iii) the modified Stöber method, (iv) hydrothermal carbonization (HTC), and (v) aerosol-assisted methods. The obtained PCSs include microporous/mesoporous/macroporous carbon spheres, single-/multi-shelled hollow carbon spheres, and yolk@shell carbon spheres. The structure-electrochemical performance correlation is discussed. Finally, the future research directions on the rational design of PCSs for supercapacitors are predicted.

A Solvent-Free Synthesis of Lignin-Derived Renewable Carbon with Tunable Porosity for Supercapacitor Electrodes

Synthesis of multiphase materials from lignin, a biorefinery coproduct, offers limited success owing to the inherent difficulty in controlling dispersion of these renewable hyperbranched macromolecules in the product or its intermediates. Effective use of the chemically reactive functionalities in lignin, however, enables tuning morphologies of the materials. Here, we bind lignin oligomers with a rubbery macromolecule followed by thermal crosslinking to form a carbon precursor with phase contrasted morphology at submicron scale. The solvent-free mixing is conducted in a high-shear melt mixer. With this, the carbon precursor is further modified with potassium hydroxide for a single-step carbonization to yield activated carbon with tunable pore structure. A typical precursor with 90 % lignin yields porous carbon with 2120 m²  g^-1 surface area and supercapacitor with 215 F g^-1 capacitance. The results show a simple route towards manufacturing carbon-based energy-storage materials, eliminating the need for conventional template synthesis.

Amending the Structure of Renewable Carbon from Biorefinery Waste-Streams for Energy Storage Applications

Biorefineries produce impure sugar waste streams that are being underutilized. By converting this waste to a profitable by-product, biorefineries could be safeguarded against low oil prices. We demonstrate controlled production of useful carbon materials from the waste concentrate via hydrothermal synthesis and carbonization. We devise a pathway to producing tunable, porous spherical carbon materials by modeling the gross structure formation and developing an understanding of the pore formation mechanism utilizing simple reaction principles. Compared to a simple hydrothermal synthesis from sugar concentrate, emulsion-based synthesis results in hollow spheres with abundant microporosity. In contrast, conventional hydrothermal synthesis produces solid beads with micro and mesoporosity. All the carbonaceous materials show promise in energy storage application. Using our reaction pathway, perfect hollow activated carbon spheres can be produced from waste sugar in liquid effluence of biomass steam pretreatment units. The renewable carbon product demonstrated a desirable surface area of 872 m²/g and capacitance of up to 109 F/g when made into an electric double layer supercapacitor. The capacitor exhibited nearly ideal capacitive behavior with 90.5% capacitance retention after 5000 cycles.

Graphene and activated carbon-wrapped and Co3O4-intercalated 3D sandwich nanostructure hybrid for high-performance supercapacitance

The graphene/Co₃O₄/activated carbon (GCA) 1 : 9 capacitor shows the best electrochemical properties with Co₃O₄ particles that were homogeneously dispersed between the graphene/Co₃O₄ (GC) layers.

Nitrogen-Doped Mesoporous Carbons for Supercapacitor Electrodes with High Specific Volumetric Capacitance

To pursue the miniaturization of supercapacitors in practical use, it is critical to construct an efficient but limited porosity of a nanocarbon-based electrode for simultaneously obtaining a high utilization of energy storage places and high coating density. However, current studies dominantly focus on the enhancement of specific mass capacitance (C_m) by increasing the pore volume and surface area, leading to a low coating density and, thereby, resulting in a low specific volumetric capacitance (C_V). We report herein the fabrication of a nitrogen-doped mesoporous carbon (NNCM), whose tunable pore volume coupled with the fixed mesopore size offers us the possibility to control the coating density, thus optimizing the C_V and C_m for different application purposes. As a result, NNCM with the highest pore volume and surface area of 2.11 cm³ g^-1 and 663 m² g^-1 demonstrates the highest C_m (190 F g^-1) but lowest C_V (124 F cm^-3) because the overhigh porosity reduces the coating density greatly. NNCM with moderate pore volume and surface area of 1.22 cm³ g^-1 and 489 m² g^-1 shows the highest C_V of 200 F cm^-3, although it presents a low C_m of 147 F g^-1. These results may raise concerns about constructing a suitable porosity to realize a target-oriented use, particularly those targeting miniaturized devices.