Three-Dimensional Pompon-like MnO2/Graphene Hydrogel Composite for Supercapacitor

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Rational design of flower-like MnO2/Ti3C2Txcomposite electrode for high performance supercapacitors

Combining the new two-dimensional conductive MXene with transition metal oxide to build composite structure is a promising path to improve the conductivity of metal oxide. However, a critical challenge still remains in how to achieve a good combination of MXene and metal oxide. Herein, we develop a facile hydrothermal route to synthesize the MnO₂/Ti₃C₂T_xcomposite electrode for supercapacitors by synergistically coupling MnO₂nanowires with Ti₃C₂T_xMXene nanoflakes. Compared with the pure MnO₂electrode, the morphology of the MnO₂/Ti₃C₂T_xcomposite electrode changes from nanowires to nanoflowers. Moreover, the overall conductivity and electrochemical performance of the composite electrode are greatly improved due to an addition of Ti₃C₂T_xMXene. The specific capacitance of the MnO₂/Ti₃C₂T_xcomposite electrode achieves 210.8 F·g^-1at a scan rate of 2 mV·s^-1, while that of the pure MnO₂electrode is only 55.2 F·g^-1. Furthermore, the specific capacitance of the MnO₂/Ti₃C₂T_xcomposite electrode still can remain at 97.2% even after 10 000 charge-discharge cycles, revealing an excellent cycle stability. The synthesis strategy of this work can pave the way for the research and practical application of the electrode materials for supercapacitors.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Jujube Shell Based-Porous Carbon Composites Double-Doped by MnO2 and Ti3C2Tx: The Effect of Double Pseudocapacitive Doping on Electrochemical Properties

In this study, manganese-containing porous carbon was synthesized from jujube shells by two-step carbonization and activation and was then covered with Ti₃C₂Tx to obtain double-doped biomass composites. In order to improve the interfacial properties (surface tension and wettability) between Ti₃C₂Tx and porous carbon, the effects of two media (deionized water and acetone solution) on the electrochemical properties of the composites were compared. The acetone solution changed the surface rheology of Ti₃C₂Tx and porous carbon, and the decreased surface tension and the increased wettability contributed to the ordered growth of 2D-Ti₃C₂Tx on the surface of the porous carbon. Raman analysis shows the relatively higher graphitization degree of JSPC&Ti₃C₂Tx (acetone). Compared with JSPC&Ti₃C₂Tx, JSPC&Ti₃C₂Tx (acetone) can maintain better rectangle-like properties even at a higher scanning rate. Under the effect of the acetone solution, the pseudocapacitive ratio of JSPC&Ti₃C₂Tx (acetone) increased from 10.1% to 30.7%. At the current density of 0.5 A/g, the specific capacitance of JSPC&Ti₃C₂Tx (acetone) achieved 96.83 F/g, and the specific capacitance of 58.17 F/g was maintained even at the high current density (10 A/g), which shows excellent magnification. Under the condition of the current density of 10 A/g, JSPC&Ti₃C₂Tx (acetone) can obtain a power density of 52,000 W/kg while maintaining an energy density of 8.74 Wh/kg. After 2000 cycles, the symmetrical button battery assembled with this material can still have a capacitance retention rate of more than 90%. This method realized the deep utilization of green and low-cost raw materials by using biomass as the precursor of composite materials and promoted the further development of carbon-based supercapacitor electrode materials.

Construction of α-MnO2 on Carbon Fibers Modified with Carbon Nanotubes for Ultrafast Flexible Supercapacitors in Ionic Liquid Electrolytes with Wide Voltage Windows

In this study, α-MnO₂ and Fe₂O₃ nanomaterials are prepared on a carbon fiber modified with carbon nanotubes to produce the nonbinder core–shell positive (α-MnO₂@CNTs/CC) and negative (Fe₂O₃@CNTs/CC) electrodes that can be operated in a wide voltage window in ultrafast asymmetrical flexible supercapacitors. MnO₂ and Fe₂O₃ have attracted wide research interests as electrode materials in energy storage applications because of the abundant natural resources, high theoretical specific capacities, environmental friendliness, and low cost. The electrochemical performance of each electrode is assessed in 1 M Na₂SO₄ and the energy storage properties of the supercapacitors consisting of the two composite electrodes are determined in Na₂SO₄ and EMImBF4 electrolytes in the 2 V and 4 V windows. The 2 V supercapacitor can withstand a large scanning rate of 5000 mV S⁻¹ without obvious changes in the cyclic voltammetry (CV) curves, besides showing a maximum energy density of 57.29 Wh kg⁻¹ at a power density of 833.35 W kg⁻¹. Furthermore, the supercapacitor retains 87.06% of the capacity after 20,000 galvanostatic charging and discharging (GCD) cycles. The 4 V flexible supercapacitor shows a discharging time of 1260 s and specific capacitance of 124.8 F g⁻¹ at a current of 0.5 mA and retains 87.77% of the initial specific capacitance after 5000 GCD cycles. The mechanical robustness and practicality are demonstrated by physical bending and the powering of LED arrays. In addition, the contributions of the active materials to the capacitive properties and the underlying mechanisms are explored and discussed

Electrochemical Performance of MnO2/Graphene Flower-like Microspheres Prepared by Thermally-Exfoliated Graphite

To enhance the electrochemical performance of MnO₂/graphene composite, herein, thermally-exfoliated graphite (TE-G) is adopted as a raw material, and a hydrothermal reaction is conducted to achieve the exfoliation of TE-G and the loading of MnO₂ nanosheets. Through optimizing the TE-G/KMnO₄ ratio in the redox reaction between carbon and KMnO₄, flower-like MnO₂/G microspheres (MnO₂/G-10) are obtained with 83.2% MnO₂ and 16.8% residual graphene. Meanwhile, corresponding MnO₂/rGO composites are prepared by using rGO as raw materials. Serving as a working electrode in a three-electrode system, MnO₂/G-10 composite displays a specific capacitance of 500 F g⁻¹ at 1 A g⁻¹, outstanding rate performance, and capacitance retention of 85.3% for 5,000 cycles. The performance is much better than that of optimized MnO₂/rGO composite. We ascribe this to the high carbon fraction in TE-G resulting in a high fraction of MnO₂ in composite, and the oxygen-containing groups in rGO reduce the resulting MnO₂ fraction in the composite. The superior electrochemical performance of MnO₂/G-10 is dependent on the hierarchical porous structure constructed by MnO₂ nanosheet arrays and the residual graphene layer in the composite. In addition, a supercapacitor assembled by TE-G negative electrode and MnO₂/G positive electrode also exhibits superior performance. In consideration of the low cost of raw materials, the MnO₂/G composite exhibits great application potential in the field of supercapacitors.

One-pot synthesis of manganese oxide/graphene composites via a plasma-enhanced electrochemical exfoliation process for supercapacitors

In this work, a feasible one-pot approach to synthesize manganese oxide/graphene composites, the so-called plasma-enhanced electrochemical exfoliation process (PE³P), has been developed. Herein, a composite of graphene decorated with manganese oxide nanoparticles was prepared via PE³P from a KMnO₄ solution and graphite electrode under a voltage of 70 V in an ambient environment. By controlling the initial KMnO₄ concentration, we obtained distinct MnO₂/graphene samples. The prepared samples were characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, and Raman spectroscopy. The electrochemical measurements of the MnO₂/graphene composites revealed that the specific capacitance of the samples is approximately 320 F g^-1 at a scan rate of 10 mV s^-1, which is comparably very high for manganese oxide/carbon-based supercapacitor electrode materials. Considering the simple, low-cost, one-step and environmentally friendly preparation, our approach has the potential to be used for the fabrication of MnO₂/graphene composites as the electrode materials of supercapacitors.

A new modification method for graphite felt electrodes in a MV/4-HO-TEMPO flow battery

Using graphite felt as the support body, reduced graphene oxide (rGO) is grown on the surface of carbon fibers by the hydrothermal reduction method, and the modified graphite felt was used as an electrode material and studied in a methyl viologen (MV)/4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxyl (4-HO-TEMPO) redox flow battery. This paper aims to solve the insufficient adhesion of the dip-coating method by simple, effective and low-cost means and provides a possibility for large-scale production and application; the new modification method increases the reaction area and performance of the electrode, resulting in high current density and improved battery performance, and in the current density of 60 mA cm-2, the battery provides 97.39% theoretical capacity, which has practical significance for battery configurations.

Three-Dimensional Graphene-Based Composite Hydrogel Materials for Flexible Supercapacitor Electrodes

Three-dimensional (3D) graphene-based hydrogels have attracted great interest for applying in supercapcacitors electrodes, owing to their intriguing properties that combine the structural interconnectivities and the outstanding properties of graphene. However, the pristine graphene hydrogel can not satisfy the high-performance demands, especial in high specific capacitance. Consequently, novel graphene-based composite hydrogels with increased electrochemical properties have been developed. In this mini review, a brief summary of recent progress in the research of the three-dimensional graphene-based composite hydrogel for flexible supercapacitors electrodes materials is presented. The latest progress in the graphene-based composite hydrogel consisting of graphene/metal, graphene/polymer, and atoms doped graphene is discussed. Furthermore, future perspectives and challenges in graphene-based composite hydrogel for supercapacitor electrodes are also expressed.

Sonochemical assisted synthesis MnO2/RGO nanohybrid as effective electrode material for supercapacitor

Manganese dioxide (MnO₂) needle-like nanostructures are successfully synthesized by a sonochemical method from an aqueous solution of potassium bromate and manganese sulfate. Also, hybride of MnO₂ nanoparticles wrapped with graphene oxide (GO) nanosheets are fabricated through an electrostatic coprecipitation procedure. With adjusting pH at 3.5, positive and negative charges are created on MnO₂ and on GO, respectively which can electrostatically attract to each other and coprecipitate. Then, MnO₂/GO pasted on stainless steel mesh is electrochemically reduced by applying -1.1V to obtain MnO₂/RGO nanohybrid. The structure and morphology of the MnO₂ and MnO₂/RGO nanohybrid are examined by Raman spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM), field emission-scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDX), and thermal gravimetric analysis (TGA). The capacitive behaviors of MnO₂ and MnO₂/RGO active materials on stainless steel meshes are investigated by cyclic voltammetry (CV), galvanostatic charge/discharge test and electrochemical impedance spectroscopy (EIS) by a three-electrode experimental setup in an aqueous solution of 0.5M sodium sulfate in the potential window of 0.0-1.0V. The electrochemical investigations reveal that MnO₂/RGO exhibits high specific capacitance (C_s) of 375Fg^-1 at current density of 1Ag^-1 and good cycle stability (93% capacitance retention after 500 cycles at a scan rate of 200mVs^-1). The obtained results give good prospect about the application of electrostatic coprecipitation method to prepare graphene/metal oxides nanohybrids as effective electrode materials for supercapacitors.

Design and synthesis of an organic (naphthoquinone) and inorganic (RuO2) hybrid graphene hydrogel composite for asymmetric supercapacitors

The NQ–RuO₂/SGH composite reveals an electrochemically positive synergy based on the properties of its organic and inorganic molecules (NQ and RuO₂).

Carbon-based supercapacitors for efficient energy storage

The advancement of modern electronic devices depends strongly on the highly efficient energy sources possessing high energy density and power density. In this regard, supercapacitors show great promise. Due to the unique hierarchical structure, excellent electrical and mechanical properties, and high specific surface area, carbon nanomaterials (particularly, carbon nanotubes, graphene, mesoporous carbon and their hybrids) have been widely investigated as efficient electrode materials in supercapacitors. This review article summarizes progress in high-performance supercapacitors based on carbon nanomaterials with an emphasis on the design and fabrication of electrode structures and elucidation of charge-storage mechanisms. Recent developments on carbon-based flexible and stretchable supercapacitors for various potential applications, including integrated energy sources, self-powered sensors and wearable electronics, are also discussed.

Ultra high stable supercapacitance performance of conducting polymer coated MnO2 nanorods/rGO nanocomposites

Schematic representation of the preparation of a MGP nanocomposite and its ultra-high stable supercapacitance.