1
|
Belgibayeva A, Rakhatkyzy M, Rakhmetova A, Kalimuldina G, Nurpeissova A, Bakenov Z. Synthesis of Free-Standing Tin Phosphide/Phosphate Carbon Composite Nanofibers as Anodes for Lithium-Ion Batteries with Improved Low-Temperature Performance. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2304062. [PMID: 37507824 DOI: 10.1002/smll.202304062] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 07/17/2023] [Indexed: 07/30/2023]
Abstract
Free-standing tin phosphide/phosphate carbon composite nanofiber mats of unique nanostructure have been successfully synthesized by electrospinning and partially reducing the phosphate-containing precursors. An unusual effect of the Sn:P molar ratio in the precursor solution on the structure and physical-electrochemical properties of the material is observed. Physical characterizations, including X-Ray diffraction (XRD), Raman spectroscopy, X-Ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), confirm the formation of tin phosphide/phosphate nanoparticles of P-rich inner Snx P layer and Sn-rich outer layer uniformly distributed within carbon nanofiber matrix when the Sn:P=1:1. The prepared material is tested as an anode material for lithium-ion batteries and it retains 1141 mAh g-1 charge capacity after 300 cycles at a current density of 250 mA g-1 with almost 100% Coulombic efficiency at room temperature. Furthermore, it demonstrates six times higher capacity (846 mAh g-1 ) at 0 °C compared to a commercial graphite anode and stable cyclability at -20 °C and 50 mA g-1 . Post-mortem ex situ XRD and SEM analyses confirm the structural stability of the designed material and the formation of a uniform stable solid electrolyte interphase layer even after 100 cycles at 50 mA g- 1 .
Collapse
Affiliation(s)
- Ayaulym Belgibayeva
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
- National Laboratory Astana, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| | - Makpal Rakhatkyzy
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| | - Aiym Rakhmetova
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| | - Gulnur Kalimuldina
- Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| | - Arailym Nurpeissova
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
- National Laboratory Astana, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| | - Zhumabay Bakenov
- Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
- National Laboratory Astana, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan
| |
Collapse
|
2
|
Ngo HM, Pal U, Kang YS, Ok KM. DFT-Based Study for the Enhancement of CO 2 Adsorption on Metal-Doped Nitrogen-Enriched Polytriazines. ACS OMEGA 2023; 8:8876-8884. [PMID: 36910961 PMCID: PMC9996777 DOI: 10.1021/acsomega.3c00395] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Accepted: 02/10/2023] [Indexed: 06/18/2023]
Abstract
Nitrogen-enriched polytriazine (NPT), a carbon nitride-based material, has received much attention for CO2 storage applications. However, to enhance the CO2 uptake capacity more efficiently, it is necessary to understand the interaction mechanism between CO2 molecules and NPT through appropriate modification of the structures. Here, we introduce a method to enhance the CO2 adsorption capacity of NPT by incorporating metal atoms such as Sn, Co, and Ni into the polytriazine network. DFT calculations were used to investigate the CO2 adsorption mechanism of the polytriazine frameworks by tracking the interactions between CO2 and the various interaction sites of NPT. By optimizing the geometry of the pure and metal-containing NPT frameworks, we calculated the binding energy of metal atoms in the NPT framework, the adsorption energy of CO2 molecules, and the charge transfer between CO2 molecules and the corresponding adsorption systems. In this work, we demonstrate that the CO2 adsorption capacity of NPT can be greatly enhanced by doping transition-metal atoms into the cavities of NPT.
Collapse
Affiliation(s)
- Hieu Minh Ngo
- Department
of Chemistry, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul 04107, Republic
of Korea
| | - Umapada Pal
- Institute
of Physics, Autonomous University of Puebla, P.O. Box. J-48, Puebla, Pue 72570 Mexico
| | - Young Soo Kang
- Department
of Environmental and Climate Technology, Korea Institute of Energy Technology, Naju-si, Jeollanam do 58217, Republic of Korea
| | - Kang Min Ok
- Department
of Chemistry, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul 04107, Republic
of Korea
| |
Collapse
|
3
|
Zhang Y, Yan D, Liu Z, Ye Y, Cheng F, Li H, Lu AH. A SnO x Quantum Dots Embedded Carbon Nanocage Network with Ultrahigh Li Storage Capacity. ACS NANO 2021; 15:7021-7031. [PMID: 33851824 DOI: 10.1021/acsnano.1c00088] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Tin-based materials with high specific capacity have been studied as high-performance anodes for energy storage devices. Herein, a SnOx (x = 0, 1, 2) quantum dots@carbon hybrid is designed and prepared by a binary oxide-induced surface-targeted coating of ZIF-8 followed by pyrolysis approach, in which SnOx quantum dots (under 5 nm) are dispersed uniformly throughout the nitrogen-containing carbon nanocage. Each nanocage is cross-linked to form a highly conductive framework. The resulting SnOx@C hybrid exhibits a large BET surface area of 598 m2 g-1, high electrical conductivity, and excellent ion diffusion rate. When applied to LIBs, the SnOx@C reveals an ultrahigh reversible capacity of 1824 mAh g-1 at a current density of 0.2 A g-1, and superior capacities of 1408 and 850 mAh g-1 even at high rates of 2 and 5 A g-1, respectively. The full cell assembled using LiFePO4 as cathode exhibits the high energy density and power density of 335 Wh kg-1 and 575 W kg-1 at 1 C based on the total active mass of cathode and anode. Combined with in situ XRD analysis, the superior electrochemical performance can be attributed to the SnOx-ZnO-C asynchronous and united lithium storage mechanism, which is formed by the well-designed multifeatured construction composed of SnOx quantum dots, interconnected carbon network, and uniformly dispersed ZnO nanoparticles. Importantly, this designed synthesis can be extended for the fabrication of other electrode materials by simply changing the binary oxide precursor to obtain the desired active component or modulating the type of MOFs coating to achieve high-performance LIBs.
Collapse
Affiliation(s)
- Yanan Zhang
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Guangrong Road 8, Hongqiao District, Tianjin 300130, P. R. China
| | - Dong Yan
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Linggong Road 2, Ganjingzi District, Dalian 116024, P. R. China
| | - Zefei Liu
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Guangrong Road 8, Hongqiao District, Tianjin 300130, P. R. China
| | - Youwen Ye
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Guangrong Road 8, Hongqiao District, Tianjin 300130, P. R. China
| | - Fei Cheng
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Guangrong Road 8, Hongqiao District, Tianjin 300130, P. R. China
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Linggong Road 2, Ganjingzi District, Dalian 116024, P. R. China
| | - Huanrong Li
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Guangrong Road 8, Hongqiao District, Tianjin 300130, P. R. China
| | - An-Hui Lu
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Linggong Road 2, Ganjingzi District, Dalian 116024, P. R. China
| |
Collapse
|
4
|
Wang Z, Gu S, Cao L, Kong L, Wang Z, Qin N, Li M, Luo W, Chen J, Wu S, Liu G, Yuan H, Bai Y, Zhang K, Lu Z. Redox of Dual-Radical Intermediates in a Methylene-Linked Covalent Triazine Framework for High-Performance Lithium-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2021; 13:514-521. [PMID: 33326203 DOI: 10.1021/acsami.0c17692] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Covalent triazine frameworks (CTFs) are promising electrodes for rechargeable batteries due to their adjustable structures, rich redox sites, and tunable porosity. However, the CTFs usually exhibit inferior electrochemical stability because of the inactivation of the unstable radical intermediates. Here, a methylene-linked CTF has been synthesized and evaluated as a cathode for rechargeable lithium-ion batteries. Electron paramagnetic resonance (EPR) and in situ Raman characterizations demonstrated that the redox activity and reversibility of α-C and triazine radical intermediates are essentially important for the charging/discharging process, which have been efficiently stabilized by the synergetic π conjugation and hindrance effect caused by the adjacent rigid triazine rings and benzene rings in the unique CTF-p framework. Additionally, the methylene groups provided extra redox-active sites. As a result, high capacity and cycling stability were achieved. This work inspires the rational modulation of the radical intermediates to enhance the electrochemical performance of organic electrode materials for the next-generation energy storage devices.
Collapse
Affiliation(s)
- Zhiqiang Wang
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Shuai Gu
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, 999077 Hong Kong, P. R. China
| | - Lujie Cao
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Long Kong
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Zhenyu Wang
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Ning Qin
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, 999077 Hong Kong, P. R. China
| | - Muqing Li
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Wen Luo
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Jingjing Chen
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Sisi Wu
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Guiyu Liu
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Huimin Yuan
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Yunfei Bai
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| | - Kaili Zhang
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, 999077 Hong Kong, P. R. China
| | - Zhouguang Lu
- Department of Materials Science and Engineering, Guangdong-Hong Kong-Macao Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, Southern University of Science and Technology, Shenzhen, 518055 Guangdong, P. R. China
| |
Collapse
|
5
|
Xiao S, Li Z, Liu J, Song Y, Li T, Xiang Y, Chen JS, Yan Q. SeC Bonding Promoting Fast and Durable Na + Storage in Yolk-Shell SnSe 2 @SeC. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2002486. [PMID: 32964603 DOI: 10.1002/smll.202002486] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/19/2020] [Revised: 07/17/2020] [Indexed: 06/11/2023]
Abstract
Tin-based compounds have received much attention as anode materials for lithium/sodium ion batteries owing to their high theoretical capacity. However, the huge volume change usually leads to the pulverization of electrode, giving rise to a poor cycle performance, which have severely hampered their practical application. Herein, highly durable yolk-shell SnSe2 nanospheres (SnSe2 @SeC) are prepared by a multistep templating method, with an in situ gas-phase selenization of the SnO2 @C hollow nanospheres. During this process, Se can be doped into the carbon shell with a tunable amount and form SeC bonds. Density functional theory calculation results reveal that the SeC bonding can enhance the charge transfer properties as well as the binding interaction between the SnSe2 core and the carbon shell, favoring an improved rate performance and a superior cyclability. As expected, the sample delivers reversible capacities of 441 and 406 mAh g-1 after 2000 cycles at 2 and 5 A g-1 , respectively, as the anode material for a sodium-ion battery. Such performances are significantly better than the control sample without the SeC bonding and also other metal selenide-based anodes, evidently showing the advantage of Se doping in the carbon shell.
Collapse
Affiliation(s)
- Shuhao Xiao
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
- Center for Applied Chemistry, University of Electronic Science and Technology of China, No. 2006, Xiyuan Ave. West Hi-Tech Zone, Chengdu, 610054, China
| | - Zhenzhe Li
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
- Center for Applied Chemistry, University of Electronic Science and Technology of China, No. 2006, Xiyuan Ave. West Hi-Tech Zone, Chengdu, 610054, China
| | - Jintao Liu
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
- Center for Applied Chemistry, University of Electronic Science and Technology of China, No. 2006, Xiyuan Ave. West Hi-Tech Zone, Chengdu, 610054, China
| | - Yushan Song
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
| | - Tingshuai Li
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
| | - Yong Xiang
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
| | - Jun Song Chen
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 610054, China
- Center for Applied Chemistry, University of Electronic Science and Technology of China, No. 2006, Xiyuan Ave. West Hi-Tech Zone, Chengdu, 610054, China
| | - Qingyu Yan
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore
| |
Collapse
|
6
|
Zhang F, Shen Y, Shao M, Zhang Y, Zheng B, Wu J, Zhang W, Zhu A, Huo F, Li S. SnSe 2 Nanoparticles Chemically Embedded in a Carbon Shell for High-Rate Sodium-Ion Storage. ACS APPLIED MATERIALS & INTERFACES 2020; 12:2346-2353. [PMID: 31877012 DOI: 10.1021/acsami.9b16659] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The development of advanced anode materials is crucial to enhance the performance of sodium-ion batteries (SIBs). In this study, SnSe2 nanoparticles chemically embedded in a carbon shell (SnSe2@C) were fabricated from Sn-organic frameworks and evaluated as an anode material for SIBs. The structural characterization demonstrated that there existed C-Sn chemical bonds between the SnSe2 nanoparticles and carbon shell, which could strongly anchor SnSe2 nanoparticles to the carbon shell. Such a structure can not only facilitate charge transfer but also ensure the structural stability of the SnSe2@C electrode. In addition, the carbon shell also helped in the dispersion of SnSe2 nanoparticles, thus offering more redox-active sites for Na+ storage. The as-prepared SnSe2@C nanocomposite could deliver good cycling stability and a superior rate capability of 324 mA h g-1 at 2 A g-1 for SIBs.
Collapse
Affiliation(s)
- Fen Zhang
- School of Chemistry and Chemical Engineering , Yangzhou University , Yangzhou 225002 , China
| | - Yu Shen
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Meng Shao
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Yongcai Zhang
- School of Chemistry and Chemical Engineering , Yangzhou University , Yangzhou 225002 , China
| | - Bing Zheng
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Jiansheng Wu
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Weina Zhang
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Aiping Zhu
- School of Chemistry and Chemical Engineering , Yangzhou University , Yangzhou 225002 , China
| | - Fengwei Huo
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| | - Sheng Li
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM) , Nanjing Tech University , Nanjing 211816 , China
| |
Collapse
|
7
|
Bimetallic metal-organic framework derived Sn-based nanocomposites for high-performance lithium storage. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.134855] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
8
|
Synthesis of MOF-derived nanostructures and their applications as anodes in lithium and sodium ion batteries. Coord Chem Rev 2019. [DOI: 10.1016/j.ccr.2019.02.029] [Citation(s) in RCA: 140] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
9
|
Xu Z, Fan L, Ni X, Han J, Guo R. Sn-encapsulated N-doped porous carbon fibers for enhancing lithium-ion battery performance. RSC Adv 2019; 9:8753-8758. [PMID: 35517654 PMCID: PMC9061834 DOI: 10.1039/c8ra10201e] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2018] [Accepted: 03/11/2019] [Indexed: 11/21/2022] Open
Abstract
Tin (Sn) has wide prospects in applications as an anode electrode material for Li-ion batteries, due to its high theoretical specific capacity. However, the large volume expansion of Sn during the charge-discharge process causes a performance reduction of lithium-ion batteries (LIBs). Here, Sn encapsulated N-doped porous carbon fibers (Sn/NPCFs) were synthesized through an electrospinning method with a pyrolysis process. This structure was beneficial for the lithium ion/electron diffusion and buffered the large volume change. By adjusting the amount of Sn, the hybrid carbon fibers with different Sn/carbon ratios could be prepared, and the morphology, composition and properties of the Sn/NPCFs were characterized systematically. The results indicated that the Sn/NPCFs with a Sn-precursor/polymer weight ratio at 0.5 : 1 showed the best cycling stability and specific capacity, preserving the specific capacity of 400 mA h g-1 at the current density of 500 mA g-1 even after 100 cycles.
Collapse
Affiliation(s)
- Zhilong Xu
- School of Chemistry and Chemical Engineering, Yangzhou University Yangzhou Jiangsu 225002 P. R. China
| | - Lei Fan
- School of Chemistry and Chemical Engineering, Yangzhou University Yangzhou Jiangsu 225002 P. R. China
| | - Xiangying Ni
- School of Chemistry and Chemical Engineering, Yangzhou University Yangzhou Jiangsu 225002 P. R. China
| | - Jie Han
- School of Chemistry and Chemical Engineering, Yangzhou University Yangzhou Jiangsu 225002 P. R. China
| | - Rong Guo
- School of Chemistry and Chemical Engineering, Yangzhou University Yangzhou Jiangsu 225002 P. R. China
| |
Collapse
|
10
|
Preparation of nitrogen doped clews-like carbon materials and their application as the electrode in supercapacitor. CHINESE CHEM LETT 2019. [DOI: 10.1016/j.cclet.2018.11.003] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
11
|
Yang W, Li X, Li Y, Zhu R, Pang H. Applications of Metal-Organic-Framework-Derived Carbon Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1804740. [PMID: 30548705 DOI: 10.1002/adma.201804740] [Citation(s) in RCA: 118] [Impact Index Per Article: 23.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/24/2018] [Revised: 09/05/2018] [Indexed: 05/18/2023]
Abstract
Carbon materials derived from metal-organic frameworks (MOFs) have attracted much attention in the field of scientific research in recent years because of their advantages of excellent electron conductivity, high porosity, and diverse applications. Tremendous efforts are devoted to improving their chemical and physical properties, including optimizing the morphology and structure of the carbon materials, compositing them with other materials, and so on. Here, many kinds of carbon materials derived from metal-organic frameworks are introduced with a particular focus on their promising applications in batteries (lithium-ion batteries, lithium-sulfur batteries, and sodium-ion batteries), supercapacitors (metal oxide/carbon and metal sulfide/carbon), electrocatalytic reactions (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction), water treatment (MOF-derived carbon and other techniques), and other possible fields. To close, some existing problem and corresponding possible solutions are proposed based on academic knowledge from the reported literature, along with a great deal of experimental experience.
Collapse
Affiliation(s)
- Wenping Yang
- School of Chemistry and Chemical Engineering, Institute for Innovative Materials and Energy, Yangzhou University, Yangzhou, 225009, Jiangsu, P. R. China
| | - Xiaxia Li
- School of Chemistry and Chemical Engineering, Institute for Innovative Materials and Energy, Yangzhou University, Yangzhou, 225009, Jiangsu, P. R. China
| | - Yan Li
- School of Chemistry and Chemical Engineering, Institute for Innovative Materials and Energy, Yangzhou University, Yangzhou, 225009, Jiangsu, P. R. China
| | - Rongmei Zhu
- School of Chemistry and Chemical Engineering, Institute for Innovative Materials and Energy, Yangzhou University, Yangzhou, 225009, Jiangsu, P. R. China
| | - Huan Pang
- School of Chemistry and Chemical Engineering, Institute for Innovative Materials and Energy, Yangzhou University, Yangzhou, 225009, Jiangsu, P. R. China
| |
Collapse
|
12
|
Cheng N, Zhao J, Fan L, Liu Z, Chen S, Ding H, Yu X, Liu Z, Lu B. Sb-MOFs derived Sb nanoparticles@porous carbon for high performance potassium-ion batteries anode. Chem Commun (Camb) 2019; 55:12511-12514. [DOI: 10.1039/c9cc06561j] [Citation(s) in RCA: 68] [Impact Index Per Article: 13.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
Abstract
Reasonable design of Sb-based nanomaterials, which can alleviate volume expansion, agglomeration and pulverization, is meaningful for PIBs.
Collapse
Affiliation(s)
- Na Cheng
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
- School of Chemistry and Chemical Engineering
| | - Jianguo Zhao
- School of Physics and Electronic Information
- Luoyang Normal University
- Luoyang
- P. R. China
| | - Ling Fan
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
| | - Zhaomeng Liu
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
| | - Suhua Chen
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
| | - Hongbo Ding
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
| | - Xinzhi Yu
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
| | - Zhigang Liu
- School of Chemistry and Chemical Engineering
- Hunan University
- Changsha 410082
- China
| | - Bingan Lu
- School of Physics and Electronics
- Hunan University
- Changsha 410082
- China
- Fujian Strait Research Institute of Industrial Graphene Technologies
| |
Collapse
|
13
|
Tang X, Liang M, Zhang Y, Sun W, Wang Y. Ultrafine ternary metal oxide particles with carbon nanotubes: a metal–organic-framework-based approach and superior lithium-storage performance. Dalton Trans 2019; 48:4413-4419. [DOI: 10.1039/c8dt05055d] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A metal–organic-framework template approach was used to fabricate ultrafine ternary metal oxide nanoparticles embedded in CNTs, which exhibit larger-than-theoretical reversible capacities for lithium-ion batteries.
Collapse
Affiliation(s)
- Xuxu Tang
- Department of Chemical Engineering
- School of Environmental and Chemical Engineering
- Shanghai University
- Shanghai
- P. R. China
| | - Ming Liang
- Guangzhou Quality Supervision and Testing Institute
- Guangzhou
- P. R. China
| | - Yanfeng Zhang
- Department of Chemical Engineering
- School of Environmental and Chemical Engineering
- Shanghai University
- Shanghai
- P. R. China
| | - Weiwei Sun
- Department of Chemical Engineering
- School of Environmental and Chemical Engineering
- Shanghai University
- Shanghai
- P. R. China
| | - Yong Wang
- Department of Chemical Engineering
- School of Environmental and Chemical Engineering
- Shanghai University
- Shanghai
- P. R. China
| |
Collapse
|
14
|
Yang Z, Wu HH, Zheng Z, Cheng Y, Li P, Zhang Q, Wang MS. Tin Nanoparticles Encapsulated Carbon Nanoboxes as High-Performance Anode for Lithium-Ion Batteries. Front Chem 2018; 6:533. [PMID: 30430108 PMCID: PMC6220033 DOI: 10.3389/fchem.2018.00533] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2018] [Accepted: 10/12/2018] [Indexed: 12/28/2022] Open
Abstract
One of the crucial challenges for applying Sn as an anode of lithium-ion batteries (LIBs) is the dramatic volume change during lithiation/delithiation process, which causes a rapid capacity fading and then deteriorated battery performance. To address this issue, herein, we report the design and fabrication of Sn encapsulated carbon nanoboxes (denoted as Sn@C) with yolk@shell architectures. In this design, the carbon shell can facilitate the good transport kinetics whereas the hollow space between Sn and carbon shell can accommodate the volume variation during repeated charge/discharge process. Accordingly, this composite electrode exhibits a high reversible capacity of 675 mAh g−1 at a current density of 0.8 A g−1 after 500 cycles and preserves as high as 366 mAh g−1 at a higher current density of 3 A g−1 even after 930 cycles. The enhanced electrochemical performance can be ascribed to the crystal size reduction of Sn cores and the formation of polymeric gel-like layer outside the electrode surface after long-term cycles, resulting in improved capacity and enhanced rate performance.
Collapse
Affiliation(s)
- Ziming Yang
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| | - Hong-Hui Wu
- Department of Chemistry, University of Nebraska-Lincoln, Lincoln, NE, United States
| | - Zhiming Zheng
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| | - Yong Cheng
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| | - Pei Li
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| | - Qiaobao Zhang
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| | - Ming-Sheng Wang
- Department of Materials Science and Engineering, College of Materials and Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen, China
| |
Collapse
|
15
|
Oh J, Lee J, Jeon Y, Kim JM, Seong KD, Hwang T, Park S, Piao Y. Ultrafine Sn Nanoparticles Anchored on Nitrogen- and Phosphorus-Doped Hollow Carbon Frameworks for Lithium-Ion Batteries. ChemElectroChem 2018. [DOI: 10.1002/celc.201800456] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Jiseop Oh
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Jeongyeon Lee
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Youngmoo Jeon
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Jong Min Kim
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Kwang-dong Seong
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Taejin Hwang
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Seungman Park
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
| | - Yuanzhe Piao
- Program in Nano Science and Technology Graduate School of Convergence Science and Technology; Seoul National University; Seoul 151-744 Republic of Korea
- Advanced Institutes of Convergence Technology; 864-1 lui-dong Yeongtong-gu, Suwon-si Gyeonggi-do 443-270 Republic of Korea
| |
Collapse
|
16
|
Nie S, Liu L, Liu J, Xie J, Zhang Y, Xia J, Yan H, Yuan Y, Wang X. Nitrogen-Doped TiO 2-C Composite Nanofibers with High-Capacity and Long-Cycle Life as Anode Materials for Sodium-Ion Batteries. NANO-MICRO LETTERS 2018. [PMID: 30393719 DOI: 10.1016/j.jallcom.2018.09.044] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Nitrogen-doped TiO2-C composite nanofibers (TiO2/N-C NFs) were manufactured by a convenient and green electrospinning technique in which urea acted as both the nitrogen source and a pore-forming agent. The TiO2/N-C NFs exhibit a large specific surface area (213.04 m2 g-1) and a suitable nitrogen content (5.37 wt%). The large specific surface area can increase the contribution of the extrinsic pseudocapacitance, which greatly enhances the rate capability. Further, the diffusion coefficient of sodium ions (D Na+) could be greatly improved by the incorporation of nitrogen atoms. Thus, the TiO2/N-C NFs display excellent electrochemical properties in Na-ion batteries. A TiO2/N-C NF anode delivers a high reversible discharge capacity of 265.8 mAh g-1 at 0.05 A g-1 and an outstanding long cycling performance even at a high current density (118.1 mAh g-1) with almost no capacity decay at 5 A g-1 over 2000 cycles. Therefore, this work sheds light on the application of TiO2-based materials in sodium-ion batteries.
Collapse
Affiliation(s)
- Su Nie
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Li Liu
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China.
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin, 300071, People's Republic of China.
| | - Junfang Liu
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Jianjun Xie
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Yue Zhang
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Jing Xia
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Hanxiao Yan
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Yiting Yuan
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| | - Xianyou Wang
- National Base for International Science and Technology Cooperation, National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, Hunan Province Key Laboratory of Electrochemical Energy Storage and Conversion, School of Chemistry, Xiangtan University, Xiangtan, 411105, People's Republic of China
| |
Collapse
|
17
|
Metal-organic frameworks derived germanium oxide nanosheets for large reversible Li-ion storage. Electrochem commun 2017. [DOI: 10.1016/j.elecom.2017.09.019] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023] Open
|
18
|
Dai R, Sun W, Lv LP, Wu M, Liu H, Wang G, Wang Y. Bimetal-Organic-Framework Derivation of Ball-Cactus-Like Ni-Sn-P@C-CNT as Long-Cycle Anode for Lithium Ion Battery. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2017; 13. [PMID: 28544389 DOI: 10.1002/smll.201700521] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2017] [Revised: 04/07/2017] [Indexed: 05/03/2023]
Abstract
Metal phosphides are a new class of potential high-capacity anodes for lithium ion batteries, but their short cycle life is the critical problem to hinder its practical application. A unique ball-cactus-like microsphere of carbon coated NiP2 /Ni3 Sn4 with deep-rooted carbon nanotubes (Ni-Sn-P@C-CNT) is demonstrated in this work to solve this problem. Bimetal-organic-frameworks (BMOFs, Ni-Sn-BTC, BTC refers to 1,3,5-benzenetricarboxylic acid) are formed by a two-step uniform microwave-assisted irradiation approach and used as the precursor to grow Ni-Sn@C-CNT, Ni-Sn-P@C-CNT, yolk-shell Ni-Sn@C, and Ni-Sn-P@C. The uniform carbon overlayer is formed by the decomposition of organic ligands from MOFs and small CNTs are deeply rooted in Ni-Sn-P@C microsphere due to the in situ catalysis effect of Ni-Sn. Among these potential anode materials, the Ni-Sn-P@C-CNT is found to be a promising anode with best electrochemical properties. It exhibits a large reversible capacity of 704 mA h g-1 after 200 cycles at 100 mA g-1 and excellent high-rate cycling performance (a stable capacity of 504 mA h g-1 retained after 800 cycles at 1 A g-1 ). These good electrochemical properties are mainly ascribed to the unique 3D mesoporous structure design along with dual active components showing synergistic electrochemical activity within different voltage windows.
Collapse
Affiliation(s)
- Ruoling Dai
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| | - Weiwei Sun
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| | - Li-Ping Lv
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| | - Minghong Wu
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| | - Hao Liu
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| | - Guoxiu Wang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, University of Technology Sydney, Broadway, Sydney, NSW, 2007, Australia
| | - Yong Wang
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai, 200444, P. R. China
| |
Collapse
|
19
|
Guo W, Sun W, Lv LP, Kong S, Wang Y. Microwave-Assisted Morphology Evolution of Fe-Based Metal-Organic Frameworks and Their Derived Fe 2O 3 Nanostructures for Li-Ion Storage. ACS NANO 2017; 11:4198-4205. [PMID: 28334522 DOI: 10.1021/acsnano.7b01152] [Citation(s) in RCA: 112] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
The metal-organic-framework (MOF) approach is demonstrated as an effective strategy for the morphology evolution control of MIL-53(Fe) with assistance of microwave irradiation. Owing to the homogeneous nucleation offered by microwave irradiation and confined porosity and skeleton by MOF templates, various porous Fe2O3 nanostructures including spindle, concave octahedron, solid octahedron, yolk-shell octahedron, and nanorod with porosity control are derived by simply adjusting the irradiation time. The formation mechanism for the MOF precursors and their derived iron oxides with morphology control is investigated. The main product of the mesoporous yolk-shell octahedron-in-octahedron Fe2O3 nanostructure is also found to be a promising anode material for lithium-ion batteries due to its excellent Li-storage performance. It can deliver a reversible larger-than-theoretical capacity of 1176 mAh g-1 after 200 cycles at 100 mA g-1 and good high-rate performance (744 mAh g-1 after 500 cycles at 1 A g-1).
Collapse
Affiliation(s)
- Wenxiang Guo
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University , 99 Shangda Road, Shanghai, People's Republic of China , 200444
| | - Weiwei Sun
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University , 99 Shangda Road, Shanghai, People's Republic of China , 200444
| | - Li-Ping Lv
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University , 99 Shangda Road, Shanghai, People's Republic of China , 200444
| | - Shaofeng Kong
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University , 99 Shangda Road, Shanghai, People's Republic of China , 200444
| | - Yong Wang
- Department of Chemical Engineering, School of Environmental and Chemical Engineering, Shanghai University , 99 Shangda Road, Shanghai, People's Republic of China , 200444
| |
Collapse
|
20
|
Luo L, Qiao H, Xu W, Li D, Zhu J, Chen C, Lu Y, Zhu P, Zhang X, Wei Q. Tin nanoparticles embedded in ordered mesoporous carbon as high-performance anode for sodium-ion batteries. J Solid State Electrochem 2017. [DOI: 10.1007/s10008-016-3501-3] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|