Influence of cerium triflate and glycerol on electrochemical performance of chitosan electrolytes for electrochromic devices

Microwave-assisted synthesis of cross-linked chitosan-metal oxide nanocomposite for methyl orange dye removal from unary and complex effluent matrices

Textile/Dyeing industries have been considered as one of the intense water-consuming units, resulting in the generation of a large volume of dye(s) contaminated effluent posing a heavy burden on the receiving water bodies. Therefore, the identification of methods to synthesize bulk quantity of adsorbent(s) and further their evaluation for the efficient treatment of effluent is one of the most prominent topics. Hence, microwave-assisted method was proposed for the rapid synthesis of nanocomposite (C-CS@ZnO) from natural biomolecule (chitosan-CS), a well-known crosslinker (tripolyphosphate) and metal-oxide (ZnO) nanoparticles. Detailed characterization was performed to identify the structure (SEM, XRD) and composition (FT-IR, XPS) of the sorbent. Sorption experiments with methyl orange (MO) dye solution were carried out under different pH (2.0-12.0), dye concentrations (150-350 mg L^-1), reaction times (0-210 min) and temperature (25-45 °C) to establish the adsorbent at the lab-scale. The maximum sorption capacity (185.2 mg g^-1) was obtained because of the ligand-exchange, Yoshida H-bonding and electrostatic interactions and was best elucidated by Freundlich (R² ≥ 0.99) and pseudo-second-order (R² ≥ 1) models. To simulate the field conditions, the effects of co-existing ions (anions/cations), cocktail dyes/ions mixture and regenerant were also studied. The obtained results suggest its promising applicability at a large scale for textile effluent treatment.

Surface Relief Grating on Chitosan-N,N-dimethyl-4-(2-pyridylazo)aniline Thin Film

We deposited homogeneous, thin, yellow-colored films of chitosan (Chi)-N,N-dimethyl-4-(2-pyridylazo)aniline (PADA) dye from an acid Chi–PADA solution by spin-coating on glass substrates. We characterized Chi, PADA, and Chi–PADA films by ATR–FTIR spectroscopy, which revealed a slight shift of 3170 and 3268 cm⁻¹ bands, indicating H-bonding between the chitosan hydroxyl (OH) group and the amine (N) of the PADA pyridine ring. Based on these analyses, it was possible to determine the efficiency of the hydrogen bonds to form a Surface Relief Grating (SRG) on azo-polymer thin film. Moreover, we performed UV–VIS spectroscopy analysis of this film, which showed a broad band extending from 400 to 700 nm, with the maximum occurring at 428 nm. Therefore, we selected, within the absorption band, the 532 nm green laser wavelength to irradiate the azo-polymer films at room temperature. For the first time, natural polymer derivative and dye sample Chi–PADA thin films showed unique photoresponsive behavior under irradiation with two interfering laser beams. This permitted us to generate surface inscription patterning known as an SRG, which we confirmed by atomic force microscopy (AFM) and for which we determined a grating depth up to 50 nm. The present study opens the new possibility of using natural polymer-dye thin films.

Bio-Based Polymer Electrolytes for Electrochemical Devices: Insight into the Ionic Conductivity Performance

With the continuing efforts to explore alternatives to petrochemical-based polymers and the escalating demand to minimize environmental impact, bio-based polymers have gained a massive amount of attention over the last few decades. The potential uses of these bio-based polymers are varied, from household goods to high end and advanced applications. To some extent, they can solve the depletion and sustainability issues of conventional polymers. As such, this article reviews the trends and developments of bio-based polymers for the preparation of polymer electrolytes that are intended for use in electrochemical device applications. A range of bio-based polymers are presented by focusing on the source, the general method of preparation, and the properties of the polymer electrolyte system, specifically with reference to the ionic conductivity. Some major applications of bio-based polymer electrolytes are discussed. This review examines the past studies and future prospects of these materials in the polymer electrolyte field.

Preparation of thin-film electrolyte from chitosan-containing ionic liquid for application to electric double-layer capacitors

A novel thin-film electrolyte (TFE) based on chitosan (CS) with 1‑ethyl‑3‑methylimidazolium tetrafluoroborate (EMImBF₄) was prepared by a new procedure for use as a solid electrolyte in electric double-layer capacitors (EDLCs). In this system, EMImBF₄ plays important roles as both a dissolving solution and a charge carrier for EDLC application. By analyzing and characterizing the obtained products, the CS-TFEs showed a surface without CS/EMImBF₄ phase separation and with high thermal stability and good tensile properties. The electrochemical properties were measured as the charge-discharge performance, the discharge capacitance, and alternating-current impedance. A test cell with CS-TFE with a calculated dry thin-film content of 80 wt% EMImBF₄ showed a comparable IR drop and higher discharge capacitance than a liquid-phase EMImBF₄ system and also showed low electrode/electrolyte interfacial resistance. Consequently, this novel CS-TFE is suitable for high-performance EDLCs and improves the safety of such devices.