Supercapacitive performances of MnO 2 nanostructures grown on hierarchical Cu nano leaves via electrodeposition

Asymmetric Supercapacitors Based on Co3O4@MnO2@PPy Porous Pattern Core-Shell Structure Cathode Materials

In recent years, supercapacitors have been developed rapidly as a rechargeable energy storage device. And the performance of supercapacitors is depending on electrode materials, the preparation method and performance of electrode materials have become the primary goal of scientific development. This study synthesizes Co3O4@MnO2@PPy cathode material with porous pattern core-shell structure by hydrothermal method and electrodeposition. The result samples are characterized by X-ray diffraction transmission/scanning electron microscope, and X-ray photoelectron spectroscopy. Electrochemical evaluation reveals that electrochemical performance is significantly enhanced by PPy depositing. The specific capacitance of Co3O4@MnO2@PPy is 977 F g−1 at 1 A g−1, the capacitance retention rate of 105%. Furthermore, the electrochemical performance of Co3O4@MnO2@PPy//AC asymmetric supercapacitor assembles with AC as the negative electrode material is significantly better than that of MnO2//AC and Co3O4@MnO2//AC. The capacity of Co3O4@MnO2@PPy//AC is 102.78 F g−1. The capacity retention rate is still 120% for 5000 charge-discharge cycles.

Free-Standing PVDF/Reduced Graphene Oxide Film for All-Solid-State Flexible Supercapacitors towards Self-Powered Systems

The development of polymer-based devices has attracted much attention due to their miniaturization, flexibility, lightweight and sustainable power sources with high efficiency in the field of wearable/portable electronics, and energy system. In this work, we proposed a polyvinylidene fluoride (PVDF)-based composite matrix for both energy harvesting and energy storage applications. The physicochemical characterizations, such as X-ray diffraction, laser Raman, and field-emission scanning electron microscopy (FE-SEM) analyses, were performed for the electrospun PVDF/sodium niobate and PVDF/reduced graphene oxide composite film. The electrospun PVDF/sodium niobate nanofibrous mat has been utilized for the energy harvester which shows an open circuit voltage of 40 V (peak to peak) at an applied compressive force of 40 N. The PVDF/reduced graphene oxide composite film acts as the electrode for the symmetric supercapacitor (SSC) device fabrication and investigated for their supercapacitive properties. Finally, the self-charging system has been assembled using PVDF/sodium niobate (energy harvester), and PVDF/reduced graphene oxide SSC (energy storage) and the self-charging capability is investigated. The proposed self-charging system can create a pathway for the all-polymer based composite high-performance self-charging system.

Improving electrochemical performance of reduced graphene oxide by counteracting its aggregation through intercalation of nanoparticles

Herein, we report the fabrication and characterization of hybrid electrode material for supercapacitor applications. CaCO₃ nanoparticles (Nps) are used as intercalator to avoid the restacking behavior of reduced graphene oxide (rGO) nanosheets. CaCO₃ Nps and rGO sheets are fabricated employing precipitation technique and microwave irradiation method, respectively. The intercalation process is performed by magnetic stirring followed by ultra-sonication technique. As prepared CaCO₃ Nps, rGO and rGO intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps are characterized using X-ray diffraction analysis, Fourier transform infrared spectroscopy and field emission scanning electron microscopy to evaluate the crystalline characteristics, molecular vibrations, and morphology, respectively. The prepared electrode materials are coated separately on the glassy carbon electrode and their electrochemical performance displayed remarkable capacitance values for rGO nanosheets intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps. From the obtained results, it is clear that the specific capacitance of 2.5 wt.% CaCO₃ intercalated rGO displays higher specific capacitance of 84.5 F/g at 5 mV/s with high retention stability. The mechanism behind the improvement in the electrochemical behavior is due to the increase in active surface area which is explained via Brunauer-Emmett-Teller analysis and energy-dispersive X-ray spectroscopic analysis.

Copper molybdenum sulfide anchored nickel foam: a high performance, binder-free, negative electrode for supercapacitors

Herein, we are demonstrating the use of a binder-free electrode based on copper-molybdenum-sulfide nanostructures grown on nickel foam (CMS/Ni) as a novel negative electrode for supercapacitors. The cyclic voltammetry and charge-discharge analyses reveal the pseudocapacitive nature of the CMS/Ni electrode with a high specific capacity of 633 mAh g^-1 (∼20-fold higher than the binder-based CMS electrode) which is mainly due to their superior electronic conductivity and short ion transport pathways. Furthermore, the fabricated symmetric supercapacitor using the CMS/Ni electrode delivered a high device capacitance (265.62 F g^-1), high energy density (23.61 Wh kg^-1) and long cycle-life. The results ensure that the CMS/Ni binder-free electrode will be a promising negative electrode for high-performance supercapacitors.