Highly porous composite based on tungsten carbide and N-doped carbon aerogels for electrocatalyzing oxygen reduction reaction in acidic and alkaline media

Cerium-Based Electrocatalysts for Oxygen Evolution/Reduction Reactions: Progress and Perspectives

Ce-based materials have been widely used in photocatalysis and other fields because of their rich redox pairs and oxygen vacancies, despite research on the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) remaining scare. However, most pristine cerium-based materials, such as CeO₂, are non-conductive materials. Therefore, how to obtain highly conductive and stable OER/ORR electrocatalysts is currently a hot research topic. To overcome these limitations, researchers have proposed a variety of strategies to promote the development of Ce-based electrocatalysts in recent years. This progress report focuses on reviewing new strategies concerning three categories of Ce-based electrocatalysts: metal-organic framework (MOF) derivatives, structure tuning, and polymetallic doping. It also puts forward the main existing problems and future prospects. The content of cerium in the crust is about 0.0046%, which is the highest among the rare earth elements. As a low-cost rare earth material, Ce-based materials have a bright future in the field of electrocatalysis due to replacing precious metal and some transition metals.

Growing Tungsten Nanophases on Carbon Spheres Doped with Nitrogen. Behaviour as Electro-Catalysts for Oxygen Reduction Reaction

This work shows the preparation of carbon nanospheres with a high superficial nitrogen content (7 wt.%), obtained by a simple hydrothermal method, from pyrocatechol and formaldehyde, around which tungsten nanophases have been formed. One of these nanophases is tungsten carbide, whose electro-catalytic behavior in the ORR has been evaluated together with the presence of nitrogen surface groups. Both current and potential kinetic density values improve considerably with the presence of tungsten, despite the significant nitrogen loss detected during the carbonization treatment. However, the synergetic effect that the WC has with other electro-catalytic metals in this reaction cannot be easily evaluated with the nitrogen in these materials, since both contents vary in opposite ways. Nevertheless, all the prepared materials carried out oxygen electro-reduction by a mixed pathway of two and four electrons, showing remarkable electro-catalytic behavior.

A novel cobalt and nitrogen co-doped mesoporous hollow carbon hemisphere as high-efficient electrocatalysts for oxygen reduction reaction

Exploring a cheap catalyst with effective activity for oxygen reduction reaction (ORR) to replace precious metal electrocatalysts has gained tremendous attention for several decades. In this study, we designed and synthesized cobalt and nitrogen supported on mesoporous hollow carbon hemisphere (Co/N/HCHs) nanocomposites by a facile and economical approach. Semisphere-shaped mesoporous hollow carbon is self-generated using silica particles as template, followed by a pyrolysis-etching process; and exhibits high electrical conductivity and high specific surface. The unique porous structure of carbon provides significant number of the abundant defective sites and shortens the mass transfer pathway, leading to a greatly enhanced electrocatalytic activity with mainly 4e^- reduction. Moreover, the synergistic effects of large electrochemically active areas and good electrical conductivity, resulting from the introduction of Co and N heteroatom, are the main reason for displaying outstanding ORR activity with a high half-wave potential of 0.8 V and the electron transfer numbers of 3.89. Furthermore, an excellent long-term stability (the current density retention of 87.0%) and superb methanol tolerance in alkaline medium are achieved. Undoubtedly, this demonstrates a potential way to strategically design the non-precious metal doped carbon catalysts for wider practical applications.

Novel combustion-carbonization preparation of mesoporous tungsten carbide as a highly active catalyst for oxygen reduction

The mesoporous WC catalyst synthesized by a novel method showed a high rate and stability for oxygen reduction performance.

Tungsten Carbide Encapsulated in Grape-Like N-Doped Carbon Nanospheres: One-Step Facile Synthesis for Low-Cost and Highly Active Electrocatalysts in Proton Exchange Membrane Water Electrolyzers

Tungsten carbide (WC) is an alternative to the costly and resource-constrained Pt-based catalysts. Herein, a one-step facile and easily scalable approach is reported to synthesize ultrafine WC nanocrystals encapsulated in porous N-doped carbon nanospheres (NC) by simple self-polymerization, drying, and annealing. It is worth mentioning that this developed method has four novel features: (1) the synthesis process, without any hard template or hydrocarbon gas feeding, is, notably, very facile and efficient with low cost; (2) the carbon coating on WC nanocrystals not only restrains coarsening of particles but also creates strong coupling interactions between the nanocrystallines and the conductive carbonaceous matrix; (3) uniform grape-like WC@NC nanospheres with high specific surface area can be obtained in a large scale; and (4) single-phase WC can be achieved. As a result, WC@NC demonstrates remarkable hydrogen evolution reaction (HER) electrocatalytic performance with overpotentials of 127 and 141 mV at a current density of 10 mA cm^-2 and Tafel slopes of 56.3 and 78.7 mV dec^-1 in acid and alkaline media, respectively. Our density functional theory calculations manifest that the strong synergistic electronic effect between WC and its intimately bonded carbon shell vastly boosts the HER electrocatalytic activity. WC@NC catalysts as a cathode are further tested in a home-made electrolyzer with 0.78 A cm^-2 achieved at a cell voltage of 2 V at 80 °C and operated stably at 200 mA cm^-2 for more than 20 h.

Hierarchically structured carbon materials derived from lotus leaves as efficient electrocatalyst for microbial energy harvesting

Developing a highly efficient, cost-effective, easily scalable and sustainable cathode for oxygen reduction reaction (ORR) is a crucial challenge in terms of future "green" energy conversion technologies, e.g., microbial fuel cells (MFCs). In this study, a natural and widely available lotus leaf with intrinsically hierarchical structure was employed to serve as the single precursor to prepare the catalyst applied as the MFC cathode. The hierarchically particle-coated bio‑carbon was self-constructed from the lotus leaf, which yielded a large specific surface area, highly porous structure and superhydrophobicity via facile pyrolysis coupling hydrothermal activation by ZnCl₂/(NH₄)₂SO₄. Electrochemical evaluation demonstrated that these natural leaf-derived carbons have an efficient ORR activity. Specifically, the HC-900 catalyst with hydrothermal activation achieved an onset potential of -0.015 V vs. Ag/AgCl, which was comparable to the commercial Pt/C catalyst (-0.010 V vs. Ag/AgCl) and was more efficient than the DC-900 catalyst through direct pyrolysis. Furthermore, the HC-900 catalyst achieved an outstanding ORR activity via a one-step and four-electron pathway, exhibiting a potential alternative to Pt/C as electrocatalyst in ORR, due to its better long-term durability and methanol resistance. Additionally, the HC-900 catalyst was applied as an effective electrocatalytic cathode in an MFC system with a maximum power density of 511.5 ± 25.6 mW⋅m^-2, exhibiting a superior energy harvesting capacity to the Pt/C cathode.

Manganese oxide doping carbon aerogels prepared with MnO2 coordinated by N, N - dimethylmethanamide for supercapacitors

Carbon aerogels with excellent conductive characteristics and high specific capacitance have attracted more and more interests for next-generation energy storage applications. Three-dimensional interconnected Mn₂O₃/carbon aerogel supercapacitor electrodes are prepared by a novel doping method using MnO₂ coordinated by N, N-dimethylmethanamide (DMF). The coordinative MnO₂ (DMF/MnO₂) plays a key role in the sol-gel process of resorcinol and formaldehyde. The doped carbon aerogels exhibits a high specific surface area of 859 m² g^-1 and a good pore-size distribution of 10-15 nm. All of the doped carbon aerogels exhibit higher specific capacitance than pure carbon aerogels, and the highest specific capacitance (170 F g^-1), at current density of 1.0 A g^-1, is obtained in Mn-CA-5% when 5 mol% DMF/MnO₂ is added to the precursor solution. The specific capacitance is as high as 100 F g^-1, at current density of 10.0 A g^-1, and 97% of initial capacitance is retained over 1000 cycles at a current density of 5.0 A g^-1. The doped carbon aerogels exhibits a high coulombic efficiency (up to 99.8%) and a good rate capability. The corresponding result is due to the novel doping method of DMF/MnO₂ addition.

A Comparison of Electrochemical Performance of Carbon Aerogels with Adsorption Metal Ions for Super Capacitors

Environmental problems caused by metal ions have caused widespread concern in recent years. In this work, carbon aerogels (CAs) adsorbing different metal ions were prepared. The adsorption performance and kinetics of metal ions (Cu(II), Cr(VI), and Fe(III)) on carbon aerogels were systematically investigated. The results indicated that the maximum adsorption capacity of Cu(II) was 424 mg·g⁻¹ in 600 mg·L⁻¹ copper solution. Adsorption performances of Cu(II), Cr(VI), and Fe(III) on CAs well fitted with a pseudo-second-order kinetic model. The structures and morphologies of metal-containing samples were characterized by scanning electron micrographs (SEM), Energy Dispersive Spectrometer (EDS), transmission electron microscope (TEM), and X-ray diffraction (XRD). The results demonstrated that the texture and electrochemical performance of CAs adsorbing metal ions exhibited a clear change. The specific surface area of CAs for adsorbing copper ions was 450 m²·g⁻¹ and they showed a small average pore diameter (7.16 nm). Furthermore, CAs adsorbing metals could be used for the super capacitor. The specific capacitance of CAs adsorbing copper ions could reach 255 F·g⁻¹ at a current density of 1.0 A·g⁻¹. The CA-Cu electrode materials exhibited excellent reversibility with a cycling efficiency of 97% after 5000 cycles.

Stable and Efficient Nitrogen-Containing Carbon-Based Electrocatalysts for Reactions in Energy-Conversion Systems

High activity and stability are crucial for the practical use of electrocatalysts in fuel cells, metal-air batteries, and water electrolysis, including the oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, and oxidation reactions of formic acid and alcohols. Electrocatalysts based on nitrogen-containing carbon (N-C) materials show promise in catalyzing these reactions; however, there is no systematic review of strategies for the engineering of active and stable N-C-based electrocatalysts. Herein, a comprehensive comparison of recently reported N-C-based electrocatalysts regarding both electrocatalytic activity and long-term stability is presented. In the first part of this review, the relationships between the electrocatalytic reactions and selection of the element to modify the N-C-based materials are discussed. Afterwards, synthesis methods for N-C-based electrocatalysts are summarized, and strategies for the synthesis of highly stable N-C-based electrocatalysts are presented. Multiple tables containing data on crucial parameters for both electrocatalytic activity and stability are displayed in this review. Finally, constructing M-N_x moieties is proposed as the most promising engineering strategy for stable N-C-based electrocatalysts.

In Situ Generated Dual-Template Method for Fe/N/S Co-Doped Hierarchically Porous Honeycomb Carbon for High-Performance Oxygen Reduction

Heteroatoms doping is able to produce catalytic sites in carbon materials for oxygen reduction reaction (ORR); while hierarchically porous structure is necessary for efficient exposure and accessibility of the usually limited catalytic sites in such activated carbon catalysts. This work reports an in situ generated dual-template method to synthesize the Fe/N/S co-doped hierarchically porous carbon (FeNS/HPC), with NaCl crystallites formed during the precursor lyophilization process as the primary template to generate ∼500 nm macropores with ultrathin graphene-like carbon-layer walls, and Fe₃O₄ nanoparticles formed during the high-temperature carbonization process as the secondary template to produce mesopores on the walls of macropores. As well as the coexistence of graphitic-N, pyridinic-N, and thiophene-S which are beneficial to ORR, the as prepared FeNS/HPC possesses a highly graphitized and interconnected hierarchical porous structure, giving a specific surface area as high as 938 m² g^-1. As a consequence, it exhibits excellent four-electron oxygen reduction performance in both alkaline and acid electrolytes. The in situ generation and facile solution removal make the present template method a promising way for scale-up preparation of active porous carbon materials for various applications.

A Novel Metal–Organic Framework Route to Embed Co Nanoparticles into Multi-Walled Carbon Nanotubes for Effective Oxygen Reduction in Alkaline Media

Metal–organic framework (MOF) materials can be used as precursors to prepare non-precious metal catalysts (NPMCs) for oxygen reduction reaction (ORR). Herein, we prepared a novel MOF material (denoted as Co-bpdc) and then combined it with multi-walled carbon nanotubes (MWCNTs) to form Co-bpdc/MWCNTs composites. After calcination, the cobalt ions from Co-bpdc were converted into Co nanoparticles, which were distributed in the graphite carbon layers and MWCNTs to form Co-bpdc/MWCNTs. The prepared catalysts were characterized by TEM (Transmission electron microscopy), XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy), BET (Brunauer–Emmett–Teller), and Raman spectroscopy. The electrocatalytic activity was measured by using rotating disk electrode (RDE) voltammetry. The catalysts showed higher ORR catalytic activity than the commercial Pt/C catalyst in alkaline solution. Co-bpdc/MWCNTs-100 showed the highest ORR catalytic activity, with an initial reduction potential and half-wave potential reaching 0.99 V and 0.92 V, respectively. The prepared catalysts also showed superior stability and followed the 4-electron pathway ORR process in alkaline solution.

Efficient synthesis of nitrogen-doped carbon with flower-like tungsten nitride nanosheets for improving the oxygen reduction reactions

Novel WN FNs/N–C consisting of WN nanosheets with flower-like morphology and N–C composites was prepared with an improved ORR performance.